Post on 03-Jun-2018
8/12/2019 Aos Rg 45350
http://slidepdf.com/reader/full/aos-rg-45350 1/2
HIGH FFI I N
Y
PLUS
August 2009R AOSRG453Page 1
PROMAX PLUS HIGH EFFICIENCY SERIES 200/201 FEATURES
MEETS ENERGY-EFFICIENCY REQUIREMENTS
FOR MOST GAS UTILITY REBATE PROGRAMS
2"-thick CFC-free foam insulation, external heat traps and other
energy-saving features produce minimum .62 Energy Factor, which
meet ENERGY STAR® requirements.
6-YEAR LIMITED TANK AND PARTS WARRANTY
For complete information, consult written warranty or A. O. Smith WaterProducts Company.
A. O. SMITH DYNACLEAN™ DIFFUSER DIP TUBE
Helps reduce lime and sediment buildup, maximizes hot water output. Made fromlong-lasting PEX cross-link polymer.
GREEN CHOICE® GAS BURNER
Patented “eco-friendly” design reduce NOx emissions by up to 33% and meets lessthan 40 ng/j requirements for low NOx.
COREGARD™ ANODE ROD
An A. O. Smith exclusive. Aluminum anode has stainless steel core, protects tankagainst corrosion longer than ordinary steel anodes.
PUSH-BUTTON PIEZO IGNITOR
Makes lighting pilot fast and easy with one-hand push-button spark ignition.
DURABLE TAMPER-RESISTANT BRASS DRAIN VALVE
BLUE DIAMOND® GLASS COATING
Provides superior corrosion resistance to industry-standard glass lining.
CSA CERTIFIED AND ASME RATED T&P RELIEF VALVE
Top-mounted T&P relief valve available as option on all models.
CODE COMPLIANCE: UBC, CEC, SBCC, CABO, HUD,
BOCA NATIONAL CODES, ASHRAE/IESNA 90.1 - CURRENT
EDITION AND 2004 NAECA STANDARDS
HIGH FFI I N
H IG H E FF IC IE NC Y
PLUS+®
DESIGN-CERTIFIED BY CSA INTERNATIONAL
According to ANSI Z21.10.1 - 4.1 CSA Standards governing storage-type water heaters.
See other side.FLAMMABLE VAPOR IGNITION RESISTANT COMPLIANT
SERIES 200/20
HIGH EFFICIENCY
MODELS
ARE ENERGY STAR®
QUALIFIED
HIGH FFI I N
Y
PLUS
HIGH FFI I N
Y
PLUS
Residential Gas Water Heaters®
8/12/2019 Aos Rg 45350
http://slidepdf.com/reader/full/aos-rg-45350 2/2
Residential Gas Water Heaters
BA
F
D
1/2" GASCONNECTION
T&P VALVE
COLDCONNECTION
C
E
*Location for optional top-mountedT&P Valve if ordered from factory.
A. O. Smith FVIR design meets or exceeds the American National Standards Institute standards(ANSI Z21.10.1 - 4.1 CSA Standards) that deal with the accidental or unintended ignition offlammable vapors, such as those emitted by gasoline.
Feature a sealed combustion chamber with air intake filter and a flame arrestor built
into the water heater base. In addition, a thermal cutoff (TCO) device, is designed
to shut off gas flow to the burner and pilot if poor combustion is detected.
Flammable Vapor IgnitionResistant Water Heaters
AOSRG45350www.hotwater.com
For Technical Information and Automated Fax Service, call 800-527-1953. A. O. Smith Corporation reserves the right to make product changes or improvements without prior notice.
MODELNUMBER
FIRSTHOUR
RATINGGALLONS
ENERGYFACTOR
GALLONCAPACITY
BTUINPUT
PER HOURNATURAL†
RECOVERY90ºF RISEGALLONSPER HOUR
FOAM
THICKNESS
(INCHES) A B C D E F
DRAFTHOOD
OUTLET
APPROXIMATESHIPPINGWEIGHT(LBS)
SHORT MODEL
DIMENSIONS IN INCHES
Maximum Hydrostatic Working Pressure: 150 PSI.
HOTCONNECTION
ANODE ROD*
TALL MODELS
Page 2 of 2
SERIES 200/201
35,500 36 267 .62 30GVR-30 3 or 4
August 2009R
If flammable vapors accidentally enter thecombustion chamber, the arrestor is designedso flames burn off the top surface and can notescape down through the arrestor.
A. Industry standard thermocoupleB. Large View Port for easy burner inspectionC. 3600 combustion air filterD. Thermal Cutoff (TCO) with manual reset
67 14722 13 8 41 3 or 447-3/451-1/241 240,00040.62GVRL-40
GVR-50 88 4140,00050.62 22 13 857-1/4612 50-1/4 3 or 4 165
126 5218 13 8 5861-1/2
40,000 41 270 .62 40GVR-40 3 or 4 15051-3/420 13 858-1/461-3/4
Recovery capacity based on actual performance tests.
Water Connections – 3/4" on all models.
† Propane Gas – 37,000 BTU input for 50 gallon models, 36,000 BTU for 40 gallon models and 32,000 BTU input for 30 gallon models.
For 10-Year Tank and 6-Year Parts Warranty, change “G” to “X” in Model Number (example: XVR-40).Heat Trap Nipples installed on all models.
®