DIMENSIONAMENTO SÍSMICO DE MUROS DE SUPORTE DE GRAVIDADE NO AMBITO DOS EUROCODIGOS ESTRUTURAIS.pdf
Apolo_tubos estruturais.PDF
-
Upload
fernandonascime7325 -
Category
Documents
-
view
215 -
download
0
Transcript of Apolo_tubos estruturais.PDF
-
8/10/2019 Apolo_tubos estruturais.PDF
1/1
17
S T R U C T U R A L P IP E S TUBOS ESTRUTURAIS
Tubos fabricados com sees circulares, quadradas e retangulares, cujaspropriedades mecnicas so requisitos fundamentais.
Utilizados para pontes, torres, coberturas, estruturas metlicas, indstria
naval e automobilstica, etc.
Normas: NBR 8261 e ASTM A 500.
These pipes are manufactured in circular, square and rectangular sections.All mechanical properties are fundamental requirements.
They are used for bridges, towers, coverings, metallic structures, naval
and automotive industry, etc.
Standards: NBR 8261 and ASTM A 500.
S U P P LY C O N D IT IO N S CONDIES DE FORNECIMENTO
Tubos Quadrados / Retangulares
Fornecidos sem revestimento e com comprimento padro de 6 m.
Tubos Redondos
Fornecidos sem revestimento ou galvanizados por imerso a quente ecom comprimento padro de 6 m.
Mediante acordo prvio, outros comprimentos podero ser fornecidos.
Square / Rectangular Pipes
They are supplied without coating and with a 6 meter standard length
Round Pipes
They are supplied without coating or galvanized by hot galvanizing bathprocess and with a 6 m standard length.
When previously agreed other lengths and coatings may be supplied.
M E C H A N IC A L P IP E S TUBOS MECNICOS
Tubos fabricados com sees circulares, quadradas e retangulares, cujasdimenses, acabamento supercial e soldabilidade so fundamentais.
Utilizados para mveis, mquinas, eletrodomsticos, indstria
automobilstica, postes, cercas, corrimos, bicicletas, conjuntos mecnicos,etc. Alm disso, estes tubos podem ser submetidos a processo detrelao.
Normas: NBR 6591, ASTM A 513 e DIN EN 10305-3 (ANTIGA DIN 2394)- redondos.
These pipes are manufactured in circular, square and rectangularsections. The dimensions, surface nish and weldability are fundamentalrequirements.
They are used for furniture, machine and automotive industry, lampposts,fences, handrails, bicycles, mechanical assembling, etc.
Standards: NBR 6591, ASTM A 513 and DIN EN 10305-3 (OLD DIN2394) - round.
S U P P LY C O N D IT IO N S CONDIES DE FORNECIMENTO
Tubos Quadrados / Retangulares
Fornecidos sem revestimento e com comprimento padro de 6m
Tubos Redondos
Fornecidos sem revestimento ou galvanizados por imerso a quente ecom comprimento padro de 6 m.
Mediante acordo prvio, outros comprimentos podero ser fornecidos.
Square / Rectangular Pipes
They are supplied without coating and with a 6 meter standard length
Round Pipes
They are supplied without coating or galvanized by hot galvanizing bathprocess and with a 6 m standard length.
When previously agreed other lengths and coatings may be supplied.