ASME VIII D1 (Interpretação Vol.19)
-
Upload
lsinsp3381 -
Category
Documents
-
view
222 -
download
0
Transcript of ASME VIII D1 (Interpretação Vol.19)
7/28/2019 ASME VIII D1 (Interpretação Vol.19)
http://slidepdf.com/reader/full/asme-viii-d1-interpretacao-vol19 1/3
m i o n VIII-1 - nterpretationsNo. 19 Vlll-1-86-36,lll-1-86-37,lll-1-86-38
Interpretation: VIlI-1-86-36
Subject:ection Vlll-1, UG-l6(b)(2),inimumWall Thickness
Date Issued: March 5, 1986
File: BC85-599
Question: Are full welded heat ransferplates of plate-typeheat exchangers exempted by
UG-l6(b)(2) from the ' / 6 in. minimum wall thickness requirements?
Reply: Yes.
Interpretation: Vlll-1-86-37
Subject:ection VIII-1, UCS-85, Heatreatment
Date Issued: March 5, 1986
File:
Question: During the fabrication of a nonimpact tested pressure vessel made rom SA-516 Grade
70 that is 5 in. thick, normalization of the material is conducted by the fabricator as a part of a hot
forming process. In order to satisfy the requirementsof UCS-85:
(a) are mill test specimens required to have the heat treatment associated with the hot forming
simulated?
(b) is it required that the manufacturer define for the mill the anticipated cooling rate from the
critical temperature during the hot forming operation?
Reply:
(a) Yes.
(b) Yes.
Interpretation: VIlI-1-86-38
Subject:ection Vill-1, UG-4, Material Testeports
Date Issued: March 5, 1986
File: BC85-608
Question: Is it a requirementof SectionVIII, Division 1, that the manufacturer of Code items shall
examine the material test report or certificate of compliance (when these documents are required) and
shalldetermine that it represents the materialand meets theequirements of thematerial
specification?
Reply: Yes.
233
American Society of Mechanical EngineersPYRIGHT American Society of Mechanical Engineers
7/28/2019 ASME VIII D1 (Interpretação Vol.19)
http://slidepdf.com/reader/full/asme-viii-d1-interpretacao-vol19 2/3
Section VIII-1 - nterpretationsNo. 32 Vlll-1-83-77R. Vlll-1-86-27R
Revisions to Interpretations Published in Previous Volumes
The following revised interpretations supercede issued interpretations VIII-1-83-77, VIII-1-86-27,MII-1-89-86, and VIII-1-92-77, whichere originally published n Interpretations Volumes 1 2,18,25, and 31, respectively, but are now no longer valid.
Interpretation: Vlll-1-83-77R
Subject:ection VIII, Division 1 (1992 Edition); UW-2(a)
Date Issued:December 3, 1992
File:
Question: May electric resistance weldedERW) pipe be used or the shell of a pressure vessel
designed for lethal service under UW-2(a) in Section VIII, Division 1whether or not radiographic
examination is performed on the ERW welded seam?
Reply: No. See UW-2(a). The provisions of UW-2(a)(2) and (3 ) do not apply.
Interpretation: VIII-1-86-27R
Subject:Section VIII, Division 1 (1992 Edition);UCS-85(b),HotFormingandHeat Treat-
ment
Date Issued:December 3, 1992
File:
Question: For vessels built tohe rules of UCS-85(b) in Section VIII, Division 1, does he term“heat treatment” include heating for the sole purpose of hot forming?
Reply: Yes.
549
American Society of Mechanical EngineersPYRIGHT American Society of Mechanical Engineers
7/28/2019 ASME VIII D1 (Interpretação Vol.19)
http://slidepdf.com/reader/full/asme-viii-d1-interpretacao-vol19 3/3
Section VIII-1- nterpretationsNo.36
Volume 19
Interpretation
VIII-1-86-36 In the second line of he Question, correct '/6 in. to read 1/16 in.
Volume 29
Interpretation
VIII-1-89-264 In rhe third lineof
Question (5) , correct 3:lO taperfa
read 3:l taper
Errata
Errata
633
American Society of Mechanical EngineersPYRIGHT American Society of Mechanical Engineerscensed by Information Handling Services