Chave Seccionadora Fusivel

download Chave Seccionadora Fusivel

of 32

Transcript of Chave Seccionadora Fusivel

  • 7/23/2019 Chave Seccionadora Fusivel

    1/32

    ProtectIT Fuse switch disconnector, XLBM 160-630A

  • 7/23/2019 Chave Seccionadora Fusivel

    2/32

  • 7/23/2019 Chave Seccionadora Fusivel

    3/32

    Contents

    Fuse protection

    General

    Apparatus and accessories

    3.1 Standard apparatus3.2 IP20 Z-busbar system and apparatus

    3.3 Accessories

    Technical data

    Ordering tables

    Dimensional drawings

    1

    2

    3

    4

    5

    6

  • 7/23/2019 Chave Seccionadora Fusivel

    4/32

  • 7/23/2019 Chave Seccionadora Fusivel

    5/32

    InLine

    1. Fuse protection

    51SEC312022B0201

    1

    Fuse protection Easy and reliableThe fuse is a superior short circuit protection element regardingthe maximum allowed cut-off current (peak let through current)and energy value. This is more important the higher the voltageand prospective fault levels are. The SlimLine switch fuses fulfilthe highest requirements for modern switch fuses with a totalsafety concept. The switch fuses are tested according to theEN 60947-3 standard with more stringent requirements for iso-lation, making, performance and safety.

    The melting curves and current limiting diagrams for NH fuselinks are given in the IEC 269-2 standard. The standardisedfuse characteristics and high degree of current limitation ensurethat there is a simple and effective coordination with fuse links

    and other devices.

    Fuse links provide a simple procedure for selecting the rightfuse type for your installation, without complicated calculationsor calculation tools. Fuses prevent "blackouts". Only the fusenearest a fault trips without upstreams fuses (feeders or mins)being affected. Fuses thus provide selective coordination.When more power is needed in an installation, more feederscan be added without changing the present structure or anynew selectivity calculations. Fuse links will assure selectivity inthe installation by 1,6:1 difference in the rated current.

    Economical installationLifetime costs of fuse systems are low. Fuse links which canwithstand a high fault level and a fault current, are available ateconomical prices. After fuse operation, only the fuse link hasto be changed. Because the fuse links can be rapidly and easi-ly replaced, plant down time and maintenance are substantiallyreduced with a fuse link system.

    Because the fusing elements operate in a cylinder, they are notaffected by their surroundings. Thus their protecting characte-ristics remain stable year after year. The dynamic stress on thenetwork and its equipment is dependent of the let through ener-

    gy (i2t) at a short circuit. The fuse link provides the best protec-tion compared to other solutions, at high short circuit currents.As the fuse link body is filled with quartz sand, there will be noemission of gases or arcs when a short circuit occurs. Thisagain leads to less stress on the network and a higher degreeof personal safety.

    Fuse protection Easy and reliable Economical installation Easy and economical selectivity No need for calculation tools No need to change the present structure when more power

    is needed No moving parts No extra operation time No arc space No emission of gasses at short circuits

    No need for calculation tools- Easy and economical selectivity

    No moving parts No extra operation time

  • 7/23/2019 Chave Seccionadora Fusivel

    6/32

    InLine

    2. General

    61SEC312022B0201

    Family presentation

    InLine is the new generation of vertical fuse rails and fuseswitch disconnectors from ABB.ABB has a long history in producing these types of devices,and the first generation was introduced already in 1967. TheInLine family consists of fuse rails, single-, and triple pole ope-

    rated fuse switch disconnectors and incoming/outgoing units.

    Areas of applications

    Cable distribution cabinets (CDC) Low voltage distribution in secondary transformer

    substations Distribution boards for industry, housing and office buildings Installations

    Inplan

    InPlan is a software tool for planning and designing InLineapplications. It may be used to have:

    - Front view diagram- Single line diagram- Material listThese can all be printed and used for documentation and offerswhere InLine is used.

    2

    The new solution for your distribution

  • 7/23/2019 Chave Seccionadora Fusivel

    7/32

    71SEC312022B0201

    InLine

    2. General

    Properties

    Fully type tested in accordance with IEC 60947-3

    Compact 48 and 98 mm width

    185mm busbar distance

    For flat or IP20 z-profile busbar

    Wide range of accessories

    Possibility of top, bottom or side cable connection

    IP20 from the front

    Available with Electronic Fuse Monitoring (EFM)

    Current metering on both the cable and busbar side

    Safe live installation with IP20 system

    V0 flame retardant materials

    Advantages

    Complete range for all applications

    Modern and sturdy design

    Flexibility snap on solutions

    Industrial IT describes the ABB group commitment to bridging the gapbetween industrial and business assets and the information tech-nology (IT) required to integrate these components in real time. Thecommitment encompasses a portfolio of compatible technologies forpower, automation, and information; a robust, open architecture forintegrated solutions; plus the domain expertise acquired throughmore than 100 years of meeting customer needs.

    This product has been certified byABB Group as Industrial IT nabled - Information Level.

    All product information is supplied in interactive electronic format,based on ABB Aspect Object technology.The Industrial IT commitment from ABB ensures that every enterprisebuilding block is equipped with the integral tools necessary to install,

    operate, and maintain it efficiently throughout the product lifecycle.

    2

  • 7/23/2019 Chave Seccionadora Fusivel

    8/32

    81SEC312022B0201

    InLine3. Apparatus and accessories

    3.1 Standard apparatus

    XUBM fuse rail

    XUBM00-100 XUBM00 XUBM1/2/3

    Fuse link NH00 NH00 NH1/2/3

    Rated current 160 A 160 A 250 A

    400 A

    630 A

    Module width 50 mm 50 mm 100 mm

    Cable Al / Cu mm2 1) 1,5 - 95 1,5 - 95 95 - 240

    Cable terminal 2) 3 x M8 3 x M8 3 x M12

    Order code 1SEP101836R0001 1SEP102110R0101 XUBM1 1SEP102111R0101

    XUBM2 1SEP102112R0101

    XUBM3 1SEP102113R0101

    3

    1. Cable lugs in accordance with DIN 46235 and DIN 46239 *)* Cable lug must be tinn-coated.

    2. Cable clamps are available as accessories.

  • 7/23/2019 Chave Seccionadora Fusivel

    9/32

    InLine3. Apparatus and accessories

    3.1 Standard apparatus

    91SEC312022B0201

    XLBM fuse switch disconnector

    XLBM00-3P-100 XLBM00-1P XLBM00-3P XLBM1/2/3-1P XLBM1/2/3-3P

    Fuse link NH00 NH00 NH00 NH1/2/3 NH1/2/3

    Rated current 160 A 160 A 160 A 250 A 250 A

    400 A 400 A

    630 A 630 A

    Module width 50 mm 50 mm 50 mm 100 mm 100 mm

    Cable Al / Cu mm2 1) 1,5 - 95 1,5 - 95 1,5 - 95 95 - 240 95 - 240

    Cable terminal 2) 3 x M8 3 x M8 3 x M8 3 x M12 3 x M12

    Order code 1SEP101818R0001 1SEP102140R0101 1SEP102140R0121 XLBM1 1SEP102141R0101 XLBM1 1SEP102141R0121

    XLBM2 1SEP102142R0101 XLBM2 1SEP102142R0121

    XLBM3 1SEP102143R0101 XLBM3 1SEP102143R0121

    3

    1. Cable lugs in accordance with DIN 46235 and DIN 46239 *)* Cable lug must be tinn-coated.

    2. Cable clamps are available as accessories.

  • 7/23/2019 Chave Seccionadora Fusivel

    10/32

    InLine3. Apparatus and accessories

    3.1 Standard apparatus

    101SEC312022B0201

    Guide marks

    In the back of the fuse rail it is printed guide marks.This makes it easier to mark drilling holes in the busbars.

    1SEB000104

    15

    30

    Top/bottom

    cable termination

    185

    185

    1SEB000106

    XLBM1/2/3

    25Nm

    M12

    25Nm

    25Nm

    25Nm

    Fixing the fuse

    switch housing

    1SEB000107

    25Nm

    M12

    90 3

    2

    1

    Hooked clamp

    XUBM-Z and XLBM-Z may be hooked on: Z busbars type BZ

    Standard flat busbars, Al/Cu

    It is possible to install the fuse rail with hooked clamp on

    live busbar. This feature is further described in the IP20Z-busbar system chapter.The hooked clamp may be used for busbars up to 10 mmthickness. The hooked clamp do not require bolts in thebusbars. This enables an easy and quick installation.

  • 7/23/2019 Chave Seccionadora Fusivel

    11/32

    InLine3. Apparatus and accessories

    3.1 Standard apparatus

    111SEC312022B0201

    3

    Sealing

    Padlock closed position

    Padlock open position

    Interlocked by useof cable shroud

    Voltagemeasurement

    Common features XLBM

  • 7/23/2019 Chave Seccionadora Fusivel

    12/32

    BZ 630 A

    BZ 630A/284 630 A 284 mm 1SEP824067R0001

    BZ 630A/536 630 A 536 mm 1SEP824068R0001

    BZ 630A/851 630 A 851 mm 1SEP824069R0001

    BZ 630A/1201 630 A 1201 mm 1SEP824070R0001

    InLine3. Apparatus and accessories

    3.2 IP20 Z-busbar system and apparatus

    121SEC312022B0201

    BZ 400 A

    BZ 400A/284 400 A 284 mm 1SEP824063R0001

    BZ 400A/536 400 A 536 mm 1SEP824064R0001

    BZ 400A/851 400 A 851 mm 1SEP824065R0001

    BZ 400A/1201 400 A 1201 mm 1SEP824066R0001

    Type Rated current Width Order code

    3

    IP20 Z-busbars, type BZ

    Z-busbars for 400/630 A. The busbar kit includes: Busbar L1, L2 and L3

    Two busbar holdersThe Z-busbars are completely IP20 protected.

    XUBM-Z and XLBM-Z may be hooked on: Z busbars type BZ

    Standard flat busbars, Al/Cu

  • 7/23/2019 Chave Seccionadora Fusivel

    13/32

    InLine3. Apparatus and accessories

    3.2 IP20 Z-busbar system and apparatus

    131SEC312022B0201

    XUBM-Z fuse rails

    XUBM00-Z XUBM1/2/3-Z XUBM1/2/3-ZS

    Fuse link NH00 NH1/2/3 NH1/2/3

    Rated current 160 A 250 A 250 A

    400 A 400 A

    630 A 630 A

    Module width 50 mm 100 mm 150 mm

    Cable Al / Cu mm2 1,5 - 95 95 - 240 50 - 300

    Cable terminal 3 x M8 3 x M12 Clamps

    Order code 1SEP102110R0201 XUBM 1 1SEP102111R0201 XUBM 1 1SEP102111R0405XUBM 2 1SEP102112R0201 XUBM 2 1SEP102112R0405

    XUBM 3 1SEP102113R0201 XUBM 3 1SEP102113R0405

    3

    1. Cable lugs in accordance with DIN 46235 and DIN 46239 *)* Cable lug must be tinn-coated.

    2. Cable clamps are available as accessories.

  • 7/23/2019 Chave Seccionadora Fusivel

    14/32

    InLine3. Apparatus and accessories

    3.2 IP20 Z-busbar system and apparatus

    141SEC312022B0201

    XLBM00-1P-Z XLBM1/2/31PZ XLBM1/2/3-1P-ZS XLBM1/2/3-1P-Z2S

    Fuse link NH00 NH1/2/3 NH1/2/3 NH1/2/3

    Rated current 160 A 250 A 250 A 250 A

    400 A 400 A 400 A

    630 A 630 A 630 A

    Module width 50 mm 100 mm 150 mm 208

    Cable Al / Cu mm2 1,5 - 95 95 - 240 50 - 300 2 x 50 - 300

    Cable terminal 3 x M8 3 x M12 Clamps Clamps

    Order code 1SEP102140R0201 XLBM1 1SEP102141R0201 XLBM1 1SEP102141R0401 XLBM1 1SEP102141R0501

    XLBM2 1SEP102142R0201 XLBM2 1SEP102142R0401 XLBM2 1SEP102142R0501

    XLBM3 1SEP102143R0201 XLBM3 1SEP102143R0401 XLBM3 1SEP102143R0501

    3

    XLBM 1 pole-Z fuse switch disconnector

    1. Cable lugs in accordance with DIN 46235 and DIN 46239 *)* Cable lug must be tinn-coated.

    2. Cable clamps are available as accessories.

  • 7/23/2019 Chave Seccionadora Fusivel

    15/32

    InLine3. Apparatus and accessories

    3.2 IP20 Z-busbar system and apparatus

    151SEC312022B0201

    XLBM 3 pole-Z fuse switch disconnector

    XLBM00-3P-Z XLBM1/2/3-3P-Z XLBM1/2/3-3P-ZS XLBM1/2/3-3P-Z2S

    Fuse link NH00 NH1/2/3 NH1/2/3 NH1/2/3

    Rated current 160 A 250 A 250 A 250 A

    400 A 400 A 400 A

    630 A 630 A 630 A

    Module width 50 mm 100 mm 150 mm 208 mm

    Cable Al / Cu mm2 1,5 - 95 95 - 240 50 - 300 2 x 50 - 300

    Cable terminal 3 x M8 3 x M12 Clamps Clamps

    Order code 1SEP102140R0221 XLBM1 1SEP102141R0221 XLBM1 1SEP102141R0421 XLBM1 1SEP102141R0521

    XLBM2 1SEP102142R0221 XLBM2 1SEP102142R0421 XLBM2 1SEP102142R0521

    XLBM3 1SEP102142R0221 XLBM3 1SEP102143R0421 XLBM3 1SEP102143R0521

    3

    1. Cable lugs in accordance with DIN 46235 and DIN 46239 *)* Cable lug must be tinn-coated.

    2. Cable clamps are available as accessories.

  • 7/23/2019 Chave Seccionadora Fusivel

    16/32

    InLine3. Apparatus and accessories

    3.2 IP20 Z-busbar system and apparatus

    161SEC312022B0201

    Feeding clamp for IP20 Z-busbar

    Modules with hooked clamp (Z)

    AKZD 95 AKKZ 300 LDL 63/3

    Rated current 160 A 630 A 63 AModule width 35 mm 55 mm 105 mm

    Cable Al / Cu mm2 6 - 95 / 2 x 6 - 50 50 - 300 6 - 25

    Order code 1SEP731594R0001 1SEP731521R0001 1SEP731530R0001

    3 Diazed fuse rail

  • 7/23/2019 Chave Seccionadora Fusivel

    17/32

    InLine3. Apparatus and accessories

    3.2 IP20 Z-busbar system and apparatus

    171SEC312022B0201

    Load break switch, switch fuse and sectionalising load break switch

    LB 160 160A load break switch 160 1,5 - 95 168 1SEP731800R0001

    LB 250 250A load break switch 250 1,5 - 95 168 1SEP731802R0001

    LB 400 400A load break switch 400 50 - 300 217 1SEP731804R0001

    LB 630 630A load break switch 630 50 - 300 245 1SEP731806R0001

    FLS 160 160A switch fuse 160 1,5 - 95 168 1SEP731808R0001

    FLS 250 250A switch fuse 250 50 - 300 217 1SEP731810R0001

    FLS 400 400A switch fuse 400 50 - 300 245 1SEP731812R0001

    FLS 630 630A switch fuse 630 50 - 300 301 1SEP731814R0001

    LS 160 160A load break switch-sectionallizer 160 168 1SEP731816R0001

    LS 250 250A load break switch-sectionallizer 250 168 1SEP731818R0001

    LS 400 400A load break switch-sectionallizer 400 217 1SEP731820R0001

    LS 630 630A load break switch-sectionallizer 630 245 1SEP731822R0001

    FSS 160 160A switch fuse - sectionallizer 160 168 1SEP731824R0001

    FSS 250 250A switch fuse - sectionallizer 250 217 1SEP731826R0001

    FSS 400 400A switch fuse - sectionallizer 400 245 1SEP731828R0001

    FSS 630 630A switch fuse - sectionallizer 630 301 1SEP731830R0001

    Type Item description Rated current Cu/Al Module Order codeA mm2 width

    3

  • 7/23/2019 Chave Seccionadora Fusivel

    18/32

    InLine3. Apparatus and accessories

    3.2 IP20 Z-busbar system and apparatus

    181SEC312022B0201

    Fuse Monitoring

    Electronic Fuse Monitoring (EFM)

    The fuse monitor is a fuse blown monitoring and indication device.The voltage supply to the internal electronic device is supported directly

    by connection to the internal fuse holders.In case of a blown fuse, the internal relay will trip for giving possibleremote alarm.Aditionally the green LED lamp in the front will change to red.After replacement to a new fuse link, the relay will automatically be reset.

    NOTE: The fuse monitor requires supply from the busbar side.

    Technical data :

    Minimum operation voltage: 380V ACMaximum operation voltage: 690V ACUimp over a blown fuse : 12,3 kVUimp between phases : 9.8 kVUimp between main circuit/ relay contacts. : 9.8 kVDielectric test voltage input / output : 3.5 kV / 50 Hz / 1 minute

    Electrostatic Discharge : EN61000-4-2 +/- 4 kV.Electrical Fast Transient: EN61000-4-4 +/- 2 kVConducted Fast transient: EN61000-4-6

    10Vrms/ 150kHz 80 MHzWire size : 15 mm2

    EMC tested: Yes

    Relay:Nominal current: 8 ampNominal switching capacity: 2000VA, AC1

    Maximum switching voltage: 440V AC, 250V DC

    3

    LED Fuse Monitoring (LFM)

    For simple visible front monitoring of the fuse status, a special LED fusemonitor kit is available. In case of a blown fuse an LED will be ignited inthe front cover at the actual phase.Available as accessory.

    1SEB000110

  • 7/23/2019 Chave Seccionadora Fusivel

    19/32

    InLine3. Apparatus and accessories

    3.3 Accessories

    191SEC312022B0201

    Accessories XUBM

    Phase barrier kit

    for segregation ofeach phase

    possibility for outletdescription

    Cable shroud

    3

    Fuse protection cover

    IP20 protection duringservice work

    require phase barrier kit

  • 7/23/2019 Chave Seccionadora Fusivel

    20/32

  • 7/23/2019 Chave Seccionadora Fusivel

    21/32

    InLine3. Apparatus and accessories

    3.3 Accessories

    211SEC312022B0201

    Accessories XLBM

    Lable holder

    1SEB000109

    3

    Micro switch

    one or two per phase

    Auxiliary switch

    Huckepack for temporary additional

    output

    Cable shroud

  • 7/23/2019 Chave Seccionadora Fusivel

    22/32

    InLine3. Apparatus and accessories

    3.3 Accessories

    Conductor cross section min-max

    Type of Conductor Rm/Sm Re/Se Torque Order codeclamp/bolt flexible mm2 mm2 (Nm)

    mm2

    XLBM / XUBM00

    Bridge Clamp (BC) 1,5 50 1,5 50 1,5 50 3,5 1SEP407733R0001

    Single Prism Clamp(SPC) 1,5 95 1,5 95 1,5 95 3,5 1SEP407732R0005

    XLBM / XUBM1/2/3

    Rm: Re:

    16 - 35 + 16 - 70 +00000 50 - 185 70 - 150

    V-clamp kit 95 240 25 1SEP304446R0001Sm: Se:

    35 - 50 + 35 - 70 +70 - 240 95 - 300

    Rm: Re:

    00000 2 x 50 - 185 2 x 70 240Double V-clamp kit 2 x 95 240 25 1SEP304457R0001

    Sm: Se:2 x 95 - 240 2 x 120 - 300

    Double cable lug kit 2 x 95 240 2 x 70 240 2 x 70 240 25 1SEP304502R0001

    221SEC312022B0201

    Cable termination

    3

    NOTE!Pressure padcan be turned

  • 7/23/2019 Chave Seccionadora Fusivel

    23/32

    InLine

    4. Technical data

    231SEC312022B0201

    XUBM Fuse rails

    XUBM00 XUBM1 XUBM2 XUBM3

    For HRC fuse links acc. toIEC 60269-2-1. 00 1 2 3

    Rated operational voltage Ue (V) 690 690 690 690

    Rated operational current Ie (A) 160 250 400 630

    Rated insulation voltage Ui (V) 1000 1000 1000 1000

    Conditional short circuit current

    with fuse links. (kArms) 50 50 50 50

    Rated frequency. (Hz) 50-60 50-60 50-60 50-60

    Degree of protection from thefront acc. to IEC 60529. *) IP 20 IP 20 IP 20 IP 20

    *) With fuse protection cover or isolated gripping lugs

    XLBM Fuse switch disconnector

    XLBM00 XLBM1 XLBM2 XLBM3

    For HRC fuse links acc. toIEC 60269-2-1. 00 1 2 3

    Rated operational voltage Ue (V) 400 500 690 400 500 690 400 500 690 400 500 690

    Rated operational current Ie (A) 160 160 125 250 250 200 400 400 315 630 630 500

    Thermal current w/fuse link lth (A) 160 250 400 630

    Rated insulation voltage Ui (V) 1000 1000 1000 1000

    Rated impulse withstand

    voltage Uimp (kV) 8 8 8 8

    Fuse protected short circuitwithstand (kArms) 50 50 50 50

    Fuse protected short circuitmaking (kArms) 50 50 50 50

    Rated making and breaking AC23B AC22B AC21B AC23B AC22B AC21B AC23B AC22B AC21B AC23B AC22B AC21Bcapacity:

    Rated frequency. (Hz) 50-60 50-60 50-60 50-60

    Power losses at Ith withoutfuse-link (W) 19,5 27 47 104

    Degree of protection from Open IP 20 IP 20 IP 20 IP 20

    the front acc. to IEC 60529. Closed IP 30 IP 30 IP 30 IP 30

    4

  • 7/23/2019 Chave Seccionadora Fusivel

    24/32

    InLine

    5. Ordering tables

    Order number Type Item description Weightdesignation Per unit (kg)

    XUBM / XLBM

    Fuse rail - XUBM

    1SEP102110R0101 XUBM00 160A incl. 3M8 1,5

    1SEP101836R0001 XUBM00-100 160A 100mm busbardist. incl. 3M8 1,0

    1SEP102100R0101 XUBM00-R 160A wo. contact shrouds, incl. 3M8 1,3

    1SEP102111R0101 XUBM1 250A incl. 3M12 2,9

    1SEP102101R0101 XUBM1-R 250A wo. contact shrouds, incl. 3M12 2,5

    1 1SEP102112R0101 XUBM2 400A incl. 3M12 3,4

    1SEP102102R0101 XUBM2-R 400A wo. contact shrouds, incl. 3M12 3,1

    1SEP102113R0101 XUBM3 630A incl. 3M12 3,9

    1SEP102103R0101 XUBM3-R 630A wo. contact shrouds, incl. 3M12 3,6

    Fuse switch disconnector - XLBM 1pole

    1SEP102140R0101 XLBM00-1P 160A 1 pole, incl. 3M8 2,2

    1SEP102140R0111 XLBM00-1P-EFM 160A 1pole, incl. EFM, incl. 3M8 2,3

    1SEP102141R0101 XLBM1-1P 250A 1 pole, incl. 3M12 4,2

    1SEP102141R0111 XLBM1-1P-EFM 250A 1pole, incl. EFM, incl. 3M12 4,4

    2 1SEP102142R0101 XLBM2-1P 400A 1 pole, incl. 3M12 4,7

    1SEP102142R0111 XLBM2-1P-EFM 400A 1pole, incl. EFM, incl. 3M12 4,9

    1SEP102143R0101 XLBM3-1P 630A 1 pole, incl. 3M12 5,2

    1SEP102143R0111 XLBM3-1P-EFM 630A 1pole, incl. EFM, incl. 3M12 5,4

    Fuse switch disconnector - XLBM 3pole1SEP102140R0121 XLBM00-3P 160A 3pole, incl. 3M8 2,3

    1SEP101818R0001 XLBM00-3P-100 160A3 pole, 100mm busbardist. incl. 3M8 1,6

    1SEP102140R0131 XLBM00-3P-EFM 160A 3pole, incl. EFM, incl. 3M8 2,4

    1SEP102141R0121 XLBM1-3P 250A 3pole, incl. 3M12 4,3

    1SEP102141R0131 XLBM1-3P-EFM 250A 3pole, incl. EFM, incl. 3M12 4,5

    3 1SEP102142R0121 XLBM2-3P 400A 3pole, incl. 3M12 4,8

    1SEP102142R0131 XLBM2-3P-EFM 400A 3pole, incl. EFM, incl. 3M12 5,0

    1SEP102143R0121 XLBM3-3P 630A 3pole, incl. 3M12 5,3

    1SEP102143R0131 XLBM3-3P-EFM 630A 3pole, incl. EFM, incl. 3M12 5,5

    241SEC312022B0201

    Explanation:

    XUBM = Fuse rail

    XLBM = Fuse switch disconnector

    XLBM-2 = Apparatus size

    XUBM-2-R = Fuse rail without contact shrouds

    XLBM-2-1P = Number of operating poles

    XLBM-2-1P-EFM = Electronic fuse monitoring

    XLBM-2-Z = Hooked clamp

    XLBM-2-ZS = Hooked clamp and side connection

    XLBM-2-Z2S = Hooked clamp and double side connection

    5

    1

    2

    3

  • 7/23/2019 Chave Seccionadora Fusivel

    25/32

    InLine

    5. Ordering tables

    251SEC312022B0201

    Order number Type Item description Weightdesignation Per unit (kg)

    XUBM / XLBM with hooked clamps for IP20 Z- busbar systemsFuse rail - XUBM with hooked clamp (Z)

    1SEP102110R0201 XUBM00-Z 160A w. hooked clamp, incl. 3M8 1,71SEP102111R0201 XUBM1-Z 250A w. hooked clamp, incl. 3M12 3,21SEP102111R0405 XUBM1-ZS 250A w. hooked clamp, side connection, incl. 3 clamps 3,2

    1 1SEP102112R0201 XUBM2-Z 400A w. hooked clamp, incl. 3M12 3,81SEP102112R0405 XUBM2-ZS 400A w. hooked clamp, side connection, incl. 3 clamps 3,71SEP102113R0201 XUBM3-Z 630A w. hooked clamp, incl. 3M12 4,21SEP102113R0405 XUBM3-ZS 630A w. hooked clamp, side connection, incl. 3M12 4,1

    Fuse switch disconnector - XLBM 1pole with hooked clamp (Z)1SEP102140R0201 XLBM00-1P-Z 160A 1pole, w. hooked clamp, incl. 3M8 2,41SEP102140R0211 XLBM00-1P-EFM-Z 160A1 pole, incl. EFM, w. hooked clamp, incl. 3M8 2,51SEP102141R0201 XLBM1-1P-Z 250A 1pole, w. hooked clamp, incl. 3M12 4,51SEP102141R0211 XLBM1-1P-EFM-Z 250A1pole, incl. EFM, w. hooked clamp, incl. 3M12 4,71SEP102141R0401 XLBM1-1P-ZS 250A1pole, w. hooked clamp, side connection, incl. 3 clamps 4,51SEP102141R0501 XLBM1-1P-Z2S 250A1pole, w. hooked clamp, 5,8

    double side connection, incl. 6 clamps1SEP102142R0201 XLBM2-1P-Z 400A 1pole, w. hooked clamp, incl. 3M12 5,11SEP102142R0211 XLBM2-1P-EFM-Z 400A1pole, incl. EFM, w. hooked clamp, incl. 3M12 4,91SEP102142R0401 XLBM2-1P-ZS 400A1pole, w. hooked clamp, side connection, incl. 3 clamps 5,01SEP102142R0501 XLBM2-1P-Z2S 400A1pole, w. hooked clamp,

    double side connection, incl. 6 clamps 6,31SEP102143R0201 XLBM3-1P-Z 630A 1pole, w. hooked clamp, incl. 3M12 5,51SEP102143R0211 XLBM3-1P-EFM-Z 630A1pole, incl. EFM, w. hooked clamp, incl. 3M12 5,71SEP102143R0401 XLBM3-1P-ZS 630A1pole, w. hooked clamp, side connection, incl. 3 clamps 5,41SEP102143R0501 XLBM3-1P-Z2S 630A1pole, w. hooked clamp, 6,7

    double side connection, incl. 6 clamps

    Fuse switch disconnector - XLBM 3pole with hooked clamp (Z)1SEP102140R0221 XLBM00-3P-Z 160A 3pole, w. hooked clamp, incl. 3M8 2,51SEP102140R0231 XLBM00-3P-EFM-Z 160A3pole, incl. EFM, w. hooked clamp, incl. 3M8 2,61SEP102141R0221 XLBM1-3P-Z 250A 3pole, w. hooked clamp, incl. 3M12 4,61SEP102141R0231 XLBM1-3P-EFM-Z 250A3pole, incl. EFM, w. hooked clamp, incl. 3M12 4,81SEP102141R0421 XLBM1-3P-ZS 250A3pole, w. hooked clamp, side connection, incl. 3 clamps 4,6

    1SEP102141R0521 XLBM1-3P-Z2S 250A3pole, w. hooked clamp, 5,8double side connection, incl. 6 clamps

    1SEP102142R0221 XLBM2-3P-Z 400A 3pole, w. hooked clamp, incl. 3M12 5,21SEP102142R0231 XLBM2-3P-EFM-Z 400A3pole, incl. EFM, w. hooked clamp, incl. 3M12 5,4

    2 1SEP102142R0421 XLBM2-3P-ZS 400A3pole, w. hooked clamp, side connection, incl. 3 clamps 5,11SEP102142R0521 XLBM2-3P-Z2S 400A3pole, w. hooked clamp, 6,3

    double side connection, incl. 6 clamps1SEP102143R0221 XLBM3-3P-Z 630A 3pole, w. hooked clamp, incl. 3M12 5,61SEP102143R0231 XLBM3-3P-EFM-Z 630A3pole, incl. EFM, w. hooked clamp, incl. 3M12 5,81SEP102143R0421 XLBM3-3P-ZS 630A3pole, w. hooked clamp, side connection, incl. 3 clamps 5,51SEP102143R0521 XLBM3-3P-Z2S 630A3pole, w. hooked clamp, 6,7

    double side connection, incl. 6 clamps

    Modules with hooked clamp (Z)1SEP731800R0001 LB 160 160A load break switch1SEP731802R0001 LB250 250A load break switch1SEP731804R0001 LB 400 400A load break switch1SEP731806R0001 LB 630 630A load break switch

    3 1SEP731808R0001 FLS 160 160A switch fuse1SEP731810R0001 FLS 250 250A switch fuse1SEP731812R0001 FLS 400 400A switch fuse1SEP731814R0001 FLS 630 630A switch fuse1SEP731816R0001 LS 160 160A l oad break switch-sectionallizer1SEP731818R0001 LS 250 250A l oad break switch-sectionallizer1SEP731820R0001 LS 400 400A l oad break switch-sectionallizer1SEP731822R0001 LS 630 630A l oad break switch-sectionallizer1SEP731824R0001 FSS 160 160A s witch fuse -sectionallizer1SEP731826R0001 FSS 250 250A s witch fuse -sectionallizer1SEP731828R0001 FSS 400 400A s witch fuse -sectionallizer1SEP731830R0001 FSS 630 630A s witch fuse -sectionallizer1SEP731530R0001 LDL 63/3 63A diazed unit w. 3 groups1SEP731594R0001 AKZD 95 Direct incomer 0,11SEP731521R0001 AKKZ 300 Direct incomer 0,4

    Kit of IP20 Z-busbars1SEP824063R0001 BZ 400A/284 400A/284mm, incl. IP20 busbars&holders

    1SEP824064R0001 BZ 400A/536 400A/536mm, incl. IP20 busbars&holders1SEP824065R0001 BZ 400A/851 400A/851mm, incl. IP20 busbars&holders

    4 1SEP824066R0001 BZ 400A/1201 400A/1201mm, incl. IP20 busbars&holders1SEP824067R0001 BZ 630A/284 630A/284mm, incl. IP20 busbars&holders1SEP824068R0001 BZ 630A/536 630A/536mm, incl. IP20 busbars&holders1SEP824069R0001 BZ 630A/851 630A/851mm, incl. IP20 busbars&holders1SEP824070R0001 BZ 630A/1201 630A/1201mm, incl. IP20 busbars&holders

    5

    1

    2

    3

    4

  • 7/23/2019 Chave Seccionadora Fusivel

    26/32

    InLine

    5. Ordering tables

    261SEC312022B0201

    Order number Type Item description Weightdesignation Per unit (kg)

    AccessoriesCommon accessories

    NHSN950001P0006 Insulated hexagon key NV6 0,1

    1 1SEP407742R0001 Micro auxiliary switch 6A/150V 0,01

    2 1SEP407742R0002 Auxiliary switch NC 10A/690V 0,02

    1SEP407742R0003 Auxiliary switch NO 10A/690V 0,02

    Accessories XUBM/XLBM00-100

    1SEP304058R0001 00-100 Cable shroud for clamps, H=106mm 0,02

    1SEP304061R0001 00-100 Cable shroud extended for cable lugs, H=150mm 0,05

    1SEP304068R0001 00-100 Label holder 0,01

    1SEP304105R0001 00-100 Phase barrier kit Kit incl. 3 pcs. 0,05

    1SEP304056R0001 00-100 Prism clamp kit Kit incl. 3 pcs. 0,1

    1SEP304060R0001 00-100 Micro switch 0,01

    1SEP304064R0001 00-100 Single adapter for 60mm busbar distance 0,3

    1SEP304066R0001 00-100 Single adapter 100 to 185mm busbar dist. 0,4

    3 1SEP304065R0001 00-100 Double adapter 100 to 185mm busbar dist. 0,71SEP304059R0001 00-100 Hooked clamp Kit incl. 3 pcs. 0,03

    Accessories XUBM/XLBM00

    1SEP201543R0001 XUBM00 Fuse protection cover 0,3

    1SEP304442R0001 XUBM00 Phase barrier kit Kit incl. 2 pcs. 0,05

    1SEP408124R0001 XUBM00 Cable shroud 0,2

    4 1SEP408126R0001 XLBM00 Cable shroud, H=185mm 0,15

    1SEP408128R0001 XLBM00 Cable shroud short, H=64 mm 0,1

    5 1SEP408139R0001 XLBM00 Label holder 0,1

    1SEP408141R0001 XLBM00 A-meter house for A-meter 48x48 mm 0,05

    NHSN714003P1150 Max A-meter QB48, 0-150-180/5A 0,1

    1SEP408149R0001 CT rear side inst. kit 160/5A 2,5VA cl.1 0.6

    1SEP407733R0001 00 Bridge clamp (3BC) 1,5-50mm2 Kit incl. 3 pcs. 0,04

    1SEP407732R0005 00 Single prism clamp (3PC) 1,5-95mm2 Kit incl. 3 pcs. 0,09

    1SEP304072R0001 00 Single adapter M12 to M8 for 185mm busbar dist. 0,4

    6 1SEP304071R0001 00 Double adapter M12 to M8 for 185mm busbar dist. 0,7

    1SEP304069R0001 00 Spare way cover 0,2

    Accessories for XUBM/XLBM 1, 2, 3

    1SEP201499R0001 XUBM1,2,3 Fuse protection cover 0,35

    1SEP304395R0001 XUBM1,2,3 Phase barrier kit Kit incl. 2 pcs. 0,15

    1SEP408125R0001 XUBM1,2,3 Cable shroud 0,25

    1SEP408127R0001 XLBM1,2,3 Cable shroud 0,2

    1SEP408140R0001 XLBM1,2,3 Label holder 0,1

    7 1SEP408142R0001 XLBM1,2,3 A-meter housing for A-meter 72x72 mm 0,05

    NHSN714004P2206 Max A-meter QB72, 0-150-180/5A 0,2

    NHSN714004P2208 Max A-meter QB72, 0-200-300/5A 0,2

    NHSN714004P2210 Max A-meter QB72, 0-400-480/5A 0,2

    NHSN714004P2212 Max A-meter QB72, 0-600-720/5A 0,2

    1SEP408149R0002 CT rear side inst. kit 200A/5A 3,75VA cl.1 Kit incl. 3 CT's 1,3

    1SEP408149R0003 CT rear side inst. kit 400A/5A 5VA cl.1 Kit incl. 3 CT's 1,3

    1SEP408149R0004 CT rear side inst. kit 600A/5A 5VA cl.1 Kit incl. 3 CT's 1,3

    1SEP408149R0005 CT rear side inst. kit 600A/5A 5VA cl.0,5 Kit incl. 3 CT's 1,3

    1SEP408149R0007 CT terminal inst. kit 200/5A 3,75VA cl.1 Kit incl. 1 CT 0,61SEP408149R0008 CT terminal inst. kit 400/5A 5VA cl.1 Kit incl. 1 CT 0,6

    1SEP408149R0009 CT terminal inst. kit 600/5A 5VA cl.1 Kit incl. 1 CT 0,6

    1SEP408149R0010 CT terminal inst. kit 600/5A 5VA cl.0,5 Kit incl. 1 CT 0,6

    NHPL046270R0002 Plug in A-meter, front cover inst 100-200/5A 0,2

    NHPL046270R0001 Plug in A-meter, front cover inst. 200-400/5A 0,2

    8 NHSN718050P2525 Plug in CT for front cover inst. A-meter 200/5A 3,5VA cl.3 0,1

    NHSN718050P2540 Plug in CT for front cover inst. A-meter 400/5A 5 VA cl.3 0,1

    NHPL046265R0001 NH2 Fuse link 400V/100A for plug in CT 0,5

    NHPL046266R0001 NH2 Fuse link 400V/125A for plug in CT 0,5

    NHPL046267R0001 NH2 Fuse link 400V/160A for plug in CT 0,5

    NHPL046268R0001 NH2 Fuse link 400V/200A for plug in CT 0,5

    9 NHPL046269R0001 NH2 Fuse link 400V/224A for plug in CT 0,5

    NHPL046272R0001 NH2 Fuse link 400V/250A for plug in CT 0,5

    NHPL046273R0001 NH2 Fuse link 400V/315A for plug in CT 0,5

    NHPL046274R0001 NH2 Fuse link 400V/335A for plug in CT 0,5

    NHPL046275R0001 NH2 Fuse link 400V/400A for plug in CT 0,5

    1SEP407946R0001 XLBM1,2,3 LED Fuse indicator (LFM) Kit incl. 3 pcs. 0,02NHSN722068P0002 1,2,3 Huckepack Temporary supply outlet 0,25

    1SEP304446R0001 1,2,3 V-clamp kit Kit incl. 3 pcs. 0,45

    1SEP304457R0001 1,2,3 Double V-clamp kit Kit incl. 3 pcs. 0,45

    1SEP304502R0001 1,2,3 Double cable lug kit Kit incl. 3 pcs. 0,45

    1SEP304080R0001 1,2,3 Spare way cover 0,31

    5

    1

    2

    4

    5

    6

    7

    3

    8

    9

  • 7/23/2019 Chave Seccionadora Fusivel

    27/32

    InLine

    6. Dimensional drawings

    271SEC312022B0201

    XUBM00-100 XLBM00-3P-100

    XUBM00 XUBM1/2/3

    1SEB000021

    25

    655,5

    68

    95

    185

    185

    119,5

    27 46

    44

    27

    97,540

    47,5

    1SEB000

    020

    43

    655,5

    21,5 27 30,5

    95

    185

    185

    113

    29

    2

    9

    19,5

    48,5 40

    6

  • 7/23/2019 Chave Seccionadora Fusivel

    28/32

    InLine

    6. Dimensional drawings

    281SEC312022B0201

    XLBM00-1P XLBM00-3P

    1SEB000053

    9 15 66

    33,5 9

    6

    607,7

    5,3

    48,5

    95

    185

    185

    30 3 0

    112,5

    5,5

    660

    18

    113

    29

    29

    19,5

    1S

    EB000054

    185

    5,5

    95

    185

    112,5

    48,5

    9 21 61 157

    5,3

    607,

    7

    6,2

    33 918 30 30

    113

    29

    29

    19,5

    660

    1SEB000102

    9 56 91 172,5

    25 47,5

    4,5

    607,7

    6

    ,2

    5

    95

    185

    185

    119

    44

    27

    27

    112,597,5

    660

    46 3 3 15

    1SEB000051

    25

    9 56 91

    47,5

    4,5

    607,7

    6,2

    5

    95

    185

    185

    119

    44

    27

    27 46 33, 5 15

    97,5

    660

    112

    6

    XLBM1/2/3-1P XLBM1/2/3-3P

  • 7/23/2019 Chave Seccionadora Fusivel

    29/32

    InLine

    6. Dimensional drawings

    291SEC312022B0201

    XUBM00-Z XUBM1/2/3-Z

    XLBM00-3P-Z XLBM1/2/3-3P-Z

    1SEB000086

    98

    185

    185

    109

    29

    29

    19,5

    21,5 27 30,5

    6

    55,5

    23 1 4,5

    40 43

    48,5

    1

    SEB000088

    4,5

    607,7

    6,2

    1824

    98,5

    185

    185

    115,5

    660

    5

    25 47,5

    44

    27

    27 46 33 15

    9 56 91 172,597,5 112

    1SEB000087

    219

    29

    29

    19,5

    18 30 30

    48,5 61 157

    6

    98,5

    185

    185

    109

    5,3

    607,7

    6

    1523

    33 9

    660

    112,5

    6

    1SEB000111

    27

    44

    115

    185

    185

    98

    24 15,5

    40 6897,5

    25 47,5 27 46

    655

  • 7/23/2019 Chave Seccionadora Fusivel

    30/32

    InLine

    6. Dimensional drawings

    301SEC312022B0201

    XLBM1/2/3-3P-ZS

    1SEB000103

    27 46 33 15

    134,5

    114

    71

    114

    71

    114

    25 47,5

    41,5

    99

    185

    185

    115,5

    4,5

    607,7

    6,2

    1824

    660

    5

    9 56 91 172,55497,5 112,5

    44

    27

    1SEB000090

    110

    660

    1824

    99

    185

    185

    115,5

    4,5

    607,7

    6,

    2

    134,5

    114

    71

    114

    71

    11

    4

    41,5

    25 47,5

    5

    9 56 91 172,597,5 112,5

    44

    27

    27 46 33 15

    6

    XLBM1/2/3-3P-Z2S

    37,5

    37,5

    XLBM00

    CT rear sideinstallation

    XLBM1/2/3CT rear sideinstallation

  • 7/23/2019 Chave Seccionadora Fusivel

    31/32

    InLine

    6. Dimensional drawings

    311SEC312022B0201

    Accessories Size 00

    1SEB000091

    51

    242

    111

    1SEB000093

    99,522 5 22

    16

    43

    5

    1SEB000092

    180,5

    5,5

    11149

    92

    48

    45,2

    1SEB00010

    0

    61SEB000096

    68

    53,7

    44,3

    48

    1SEB000098

    48,6

    71

    48,6

    22,5

    Cable shroud XUBM Cable shroud XLBM

    Cable shroud short

    Ammeter house

    EFM Label holder

  • 7/23/2019 Chave Seccionadora Fusivel

    32/32

    InLine

    6. Dimensional drawings

    Accessories Size 1/2/3

    1SEB000094

    240

    126,597

    47

    92

    97,5

    1

    SEB00101

    1SEB000095

    184

    5

    98 116

    74

    97,5

    68,2

    92,1

    1S

    EB000097

    1SEB000099

    22,5

    50

    97,5

    78,5

    ABB ASLow Voltage Products

    Automation Technologies DivisionP.O. Box 100, Sentrum,N 3701 Ski N

    A part of its on-going product improvement, ABB reserves

    the right to modify the characteristics or the products des-

    cribed in this brochure. The information given is not-contractual. For further details please contact the ABB

    company marketing theese products in your country.

    12022

    B0201

    4 ssen,

    Skien

    6

    Cable shroud XUBM

    Cable shroud XLBM

    Label holder

    Ammeter houseEFM