DIY Wood Truck - Caminhão de Madeira

8/10/2019 DIY Wood Truck - Caminho de Madeira

1/32

ToymakingPlans.com 2014

Its all quick and easy to make withno fancy joints or cuts. Build it usingcommon tools and with easy to ndmaterials and supplies.

FULL-SIZE

WOOD TOY

PLAN SET

FAMOUSMERCEDESLORRY TRUCK

Lorry Truck

Dimensions:

5-1/2 wide

5-7/8 high

10-3/8 long

READ BEFORE PRINTING!Please SAVE the PDF le before you print pages. To conserveprinting ink we recommend that you print only the black andwhite precision line pattern drawings pages in the plan set.

For more tips and frequently asked questions about our PDF les visitour website at www.toymakingplans.com and click the PDF Questionsbutton at the top of our website.


2/32

Famous MercedesLORRY TRUCK

2 ToymakingPlans.com 2014

After the toy is assembled and glued apply Cynthias PasteWax Finish. The home-made formula is on our website attoymakingplans.com.

Design by

Ericson San Diego

ALTERNATE FINAL FINISH COAT: Apply 3 coats of spray canpolyurethane clear coat and sand each coat when dry with 400

grit paper. Apply 2 nal nish coats that are not sanded.


3/32

3ToymakingPlans.com 2014

Warning: Read before copying.

ToymakingPlans.com is dedicated to providing you with the

information and ideas you need to develop your skills as a toymaker.

We welcome your comments and any suggestions about this

collection of toy plans.

Email: [email protected] ToymakingPlans.com - All rights reserved - 032614

Note to the Readers: Due to different conditions, tools, and

individual skills, ToymakingPlans.com assumes no responsibility

for any damages, injuries suffered, or losses incurred as a result of

following the information published in this plan set. Before beginning

any project review instructions carefully. If any doubts or questions

remain consult local experts or authorities.

Copyright Information: Plans and patterns in this Plan Set

can be photo-copied for personal use when building the toys.

ToymakingPlans.com plans and patterns are copyrighted and cannot

be distributed or shared for free or for any other reason.

The unauthorized reproductionor distribution of this copyrightedwork is illegal. Criminal copyrightinfringement including infringementwithout monetary gain, is investigated

by the FBI and is punishable by up to5 years in federal prison and a ne of$250,000.

Make as many of each toy as you like! The

wood toys in this plan set are royalty-free. You

have the right to build any quantity of these

toys for any reason.

The plans and patterns in this planset can

be photo-copied for your personal use when

building the toys. ToymakingPlans.com plans

and patterns are copyrighted and cannot legally

be copied, distributed or shared with anyone for

any other purpose.

Color & Natural Wood Pictorial Views ....................................4-17

Precision Line Patterns Index and Exploded View ...............18-19

Step-by-Step Assembly How-Tos ........................................20-21

Full-Size Precision Line Plan Views .....................................22-23

Full-Size Precision Line Patterns..........................................24-27

Cartoning and Label .............................................................28-29

Printable Gallery Photos .......................................................30-32

LORRY TRUCK

Famous Mercedes

FULL-SIZE WOOD TO PLAN SET


4/32



The painted Mercedes LorryTruck is built with project panel plywoodand MDF for the smoothest nish. Finish is spray can Krylon orRust-Oleum white primer and color glosses. Krylon brush-on ColorCreations also works well. With both types of paint, apply 2 coatsof primer sanding each coat with 220 sandpaper when dry. Apply3 coats of color sanding with 400 sandpaper when dry. Apply nalcoat of Krylon Triple Thick Clear. All Krylon and Rust-Oleum paintsand nishes are non-toxic when dry.


5/32

5




6/32




7/32


ToymakingPlans.com 2014 7


8/32




9/32




10/32


11/32



11

I hope you enjoy building theLorry Truck as much as I enjoyeddesigning it. Good luck to you.

John W. LewmanToymakingPlans.com


12/32



Side View

Actual Size


13/32



Top View

Actual Size


14/32



Bottom View

Actual Size


15/32



Front View

Actual Size


16/32



Rear View

Actual Size


17/32




18/32


1. 1/2 x 2 x 9 make 2

2. 1/2 x 1-1/2 x 4-1/2 make 1

3. 1/4 x 5/16 x 4 make 2

4. 1/2 x 1-13/16 x 2-3/16 make 2

5. 1/4 diameter x 5/8 make 4 6. 1/4 diameter x 3-3/4 make 2

7. 1/2 x 5-1/2 x 5-1/2 make 1

8. 3/8 diameter x 4-15/16 make 3

9. 2-1/4 diameter x 3/4 thick buy 6

10. 1/4 diameter x 2 make 14

11. 1/4 x 1-1/4 x 1-1/2 make 2

12. 1/2 x 3/4 x 1-1/4 make 2

13. 1 diameter x 1/8 make 1

14. 1/2 x 1-1/2 x 3-1/2 make 2

15. 1/2 x 1/2 x 5-1/2 make 2

16. 1/2 x 3-13/16 x 4-1/2 make 1 17. 1/8 x 1/2 x 3/4 make 2

18. 1/8 x 3/8 x 3/4 make 2

19. 1/2 x 1/2 x 3-1/2 make 1

20. 1/2 x 1-1/16 x 1-7/8 make 2

21. 1/2 x 1-3/4 x 3-1/2 make 1

22. 1/2 x 2 x 4-1/2 make 1

23. 1/2 diameter x 3/8 make 1

24. 1/4 x 3 x 3-1/2 make 1

Patterns Index

pages 22-23

page 24 page 25

page 26 page 27

24

21

20

22

1817

16

14

7

9

8

2

3 5 4

6

1

12

10

13

19

11

15

23


19/32

19

Famous MercedesLORRY TRUCKPatterns Index

Refer to fullsize planviews pages22-23 whenassemblingthe truck.

Wheels: order fromcraftparts.comPart # TWT2252-1/4 diameter x 3/4treaded wood wheelwith 3/8 axle hole

14

4

22

23

15

21

20

2

18

17

16

14

7

9

8

5

4

6

1

12

10

13

1911

5

5

5

9

9

9

24

3

10


20/32



Step 1:Referring to Plan Views on pages 22-23, glue and clamp two Part 14s andone Part 21 to Part 24. Let dry then glue and clamp two Part 1s to 14/14/21/24. Thetwo Part 1s are ush with the front edge of Part 24 and the inside edges of the twoPart 14s. See photo in Step 2 for reference. Let dry.

Step 2: Referring to Plan Views on pages 22-23, glue and clamp Part 7, 2, 22 and23 to the Step 1 Assembly. Let assembly dry before proceeding.

Step 3:Referring to Plan Views on pages 22-23, glue and clamp two Part 20s andPart 13 to Part 19 to the Step 2 Assembly. Let dry. Glue two Part 11s to two Part12s and let dry. Then glue two Part 11/12 assemblies to the Step 2 Assembly.

Step 4:Referring to Plan Views on pages 22-23 glue and clamp two Part 4s andone Part 16 to the Step 3 Assembly. Let assembly dry before proceeding.

Step 3 Assembly

Step 1 Assembly

Step 2 Assembly

24

20

22

16

14

7

1

12

13

19

11

23

1

14

20

21

2

4

4

14


21/32


22/32



IMPORTANT NOTE

To print out enough paper patterns for the entire plan set from yourcomputer printer only print pages 22 through 27. The pages are all linedrawings in black to conserve printer ink. Check your printer printed sizeaccuracyby measuring printer scale on each pattern with a ruler. If printedsize of pattern is not 100% adjust printer settings.

0 1 2 3printer scale

ACTUAL SIZEACTUAL SIZE

ATTENTION:

THIS FULL SIZE PRECISION PLAN VIEW IS

FOR ASSEMBLY REFERENCE. INDIVIDUAL

PATTERNS ON PAGES 24-27.

LORRY TRUCK

SIDE PLAN VIEW

1

2

3

4

5

6

7

8 8 8

10

10

11

12

3

9

13

14

15

16

17

18

19

20

21

22

23

24

1


23/32



IMPORTANT NOTE

To print out enough paper patterns for the entire plan set from your computerprinter only print pages 22 through 27. The pages are all line drawings inblack to conserve printer ink. Check your printer printed size accuracybymeasuring printer scale on each pattern with a ruler. If printed size of pattern isnot 100% adjust printer settings.


ACTUAL SIZEATTENTION:

THIS FULL-SIZE PRECISION PLAN VIEW IS

FOR ASSEMBLY REFERENCE. INDIVIDUAL

PATTERNS ON PAGES 24-27.

LORRY TRUCK

TOP PLAN VIEW

18

18

8 88

1

1

11

12

11

12

21

13

19

10

10

10

10

5

5

6

6

7

15

7

15

9

17

17

22

23


24/32

MAKE 2 OFTHIS PART

MAKE 2 OF THIS PART

MAKE 2 OFTHIS PART

MAKE 4 OFTHIS PART

MAKE 2 OFTHIS PART



1/4 dia. holex 1/2 deep

1/4 dia.hole thru

7/16 dia. holethru 3 places

45 degreeangle

68 degreeangle


ACTUAL SIZEACTUAL SIZEIMPORTANT NOTE

To print out enough paper patterns for the entire plan set from yourcomputer printer only print pages 22 through 27. The pages are all linedrawings in black to conserve printer ink. Check your printer printed sizeaccuracyby measuring printer scale on each pattern with a ruler. If printedsize of pattern is not 100% adjust printer settings.

1. 1/2 x 2 x 9 make 2

2. 1/2 x 1-1/2 x 4-1/2

make 1

3. 1/4 x 5/16 x 4 make 2

4. 1/2 x 1-13/16

x 2-3/16 make 2

5. 1/4 diameter x 5/8

make 4

6. 1/4 diameter x 3-3/4 make 2

2

3

5

4

6

1


25/32

MAKE3OFTHISPAR

T

BUY 6 OF THIS PART




IMPORTANT: First clamptwo pre-drilled Part 15sto Part 7 for perfect holealignment when drilling the

Part 10 post holes in Part 7.

3/8 dia. holethru


ACTUAL SIZE

IMPORTANT NOTE

To print out enough paper patterns forthe entire plan set from your computerprinter only print pages 22 through27. The pages are all l ine drawings inblack to conserve printer ink. Checkyour printer printed size accuracybymeasuring printer scale on each patternwith a ruler. If printed size of pattern isnot 100% adjust printer settings.

Wheels: order fromwww.craftparts.comPart # TWT225

2-1/4 diameter x 3/4treaded wood wheelwith 3/8 axle hole

7. 1/2 x 5-1/2 x 5-1/2 make 1

8.

3/8 diameter

x 4-15/16

make 3

9. 2-1/4

diameter x

3/4 thick

buy 6 7

9

8


26/32

F M d


27/32

MAKE 2 OFTHIS PART

MAKE 2 OFTHIS PART

MAKE 2 OFTHIS PART




IMPORTANT: Glue and clamp Part 16 to toStep 3 Assembly for perfect hole alignment

when drilling the post holes into two Part14s. See Step 5 on page 21. The two Part10s are then glued in place in Step 6.

45 degreeangle

45 degreeangle


ACTUAL SIZEIMPORTANT NOTE

To print out enough paper patterns for the entire plan set from your computer printeronly print pages 22 through 27. The pages are all line drawings in black to conserveprinter ink. Check your printer printed size accuracyby measuring printer scale oneach pattern with a ruler. If printed size of pattern is not 100% adjust printer settings.

1/2 dia. holethru

16. 1/2 x 3-13/16 x 4-1/2

make 1

17. 1/8 x

1/2 x 3/4make 2

18. 1/8 x

3/8 x 3/4make 2

19. 1/2 x 1/2 x 3-1/2 make 1

20. 1/2 x 1-1/16 x 1-7/8

make 2

21. 1/2 x 1-3/4 x 3-1/2 make 1

22. 1/2 x 2 x 4-1/2 make 1

23. 1/2 diameter

x 3/8 make 1

21

20

22

1817

16

19

23


28/32


Add a pro-touch to your work with a labeled and signatured gift box. The Mercedes Lorry Truck ts beautifully inthis off-the-shelf corrugate carton that you can order online in quantities as low as 25 cartons. The cartons aredelivered to your door in 3 to 5 days. Ask for item number S-16715. The carton size is 11 x 6 x 6. Shipping isextra. Order at www.uline.com.

Offer your Famous MERCEDES LORRY TRUCK in alabeled gift box at the next party or Crafts Show.

Famous Mercedes


29/32




Built By

Handcrafted

Wood Toy


30/32


31/32


32/32

DIY Wood Truck - Caminhão de Madeira

Documents

Transcript of DIY Wood Truck - Caminhão de Madeira