Intervalos de Manutenção 950H (Só Em Inglês)

download Intervalos de Manutenção 950H (Só Em Inglês)

of 4

Transcript of Intervalos de Manutenção 950H (Só Em Inglês)

  • 7/25/2019 Intervalos de Manuteno 950H (S Em Ingls)

    1/4

    Shutdown SIS

    Previous Screen

    Product: WHEEL LOADER

    Model: 950H WHEEL LOADER M1G02283

    Configuration: 950H Wheel Loader M1G00001-UP (MACHINE) POWERED BY C7 Engine

    Operation and Maintenance Manual950H and 962H Wheel Loaders and IT62H Integrated ToolcarrierMedia Number -SEBU7889-18 Publication Date -01/06/2011 Date Updated -10/06/2011

    i04402294

    Maintenance Interval Schedule

    SMCS -7000

    Ensure that all safety information, warnings, and instructions are read and understood before any operation or anymaintenance procedures are performed.

    The user is responsible for the performance of maintenance. All adjustments, the use of proper lubricants, fluids,filters, and the replacement of components due to normal wear and aging are included. Failure to adhere to propermaintenance intervals and procedures may result in diminished performance of the product and/or acceleratedwear of components.

    Use mileage, fuel consumption, service hours, or calendar time, WHICH EVER OCCURS FIRST, in order todetermine the maintenance intervals. Products that operate in severe operating conditions may require morefrequent maintenance. Refer to the maintenance procedure for any other exceptions that may change the

    maintenance intervals.

    Note: The aftertreatment system can be expected to function properly for the useful life of the engine (emissionsdurability period), as defined by regulation. All prescribed maintenance requirements must be followed.

    Note: Before each consecutive interval is performed, all maintenance from the previous interval must beperformed.

    Note: If Cat HYDO Advanced hydraulic oils are used, the hydraulic oil change interval is extended to 3000hours. SOS services may extend the oil change even longer. Consult your Cat dealer for details.

    When Required

    Automatic Lubrication Grease Tank - FillBattery or Battery Cable - Inspect/ReplaceBucket Cutting Edges - Inspect/ReplaceBucket Hinge and Lift Arm Clearance Shims - Inspect/Adjust/ReplaceBucket Tips - Inspect/ReplaceCamera - CleanCircuit Breakers - ResetEngine Air Filter Primary Element - Clean/ReplaceEngine Air Filter Secondary Element - ReplaceEther Starting Aid Cylinder - Replace

    Fuel System - PrimeFuses - ReplaceHigh Intensity Discharge Lamp (HID) - ReplaceOil Filter - InspectPallet Fork - InspectRadiator Core - Clean

    Pgina 1 de 4950H Wheel Loader M1G00001-UP (MACHINE) POWERED BY C7 Engine(SEBP4274 - 31) - D...

    18/08/2011https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/mediasea...

  • 7/25/2019 Intervalos de Manuteno 950H (S Em Ingls)

    2/4

    Ride Control Accumulator - CheckSecondary Steering - TestWindow Washer Reservoir - FillWindow Wiper - Inspect/Replace

    Every 10 Service Hours or Daily

    Backup Alarm - TestCooling System Coolant Level - Check

    Engine Oil Level - CheckFuel System Primary Filter (Water Separator) - DrainHydraulic System Oil Level - CheckQuick Coupler - CheckSeat Belt - InspectTransmission Oil Level - CheckWindows - Clean

    Every 50 Service Hours or Weekly

    Bucket Lower Pivot Bearings - Lubricate

    Cab Air Filter - Clean/ReplaceFuel Tank Water and Sediment - DrainTire Inflation - Check

    Every 100 Service Hours or 2 Weeks

    Axle Oscillation Bearings - LubricateBucket Linkage and Loader Cylinder Bearings - LubricateBucket Upper Pivot Bearings - LubricateLogging Fork Clamp - LubricateSteering Cylinder Bearings - Lubricate

    Initial 250 Service Hours

    Engine Valve Lash - CheckTransmission Oil Filter - Replace

    Every 250 Service Hours

    Cooling System Coolant Sample (Level 1) - ObtainEngine Oil Sample - Obtain

    Every 250 Service Hours or Monthly

    Battery - CleanBelt - Inspect/Adjust/ReplaceBrake Accumulator - CheckBraking System - TestDifferential and Final Drive Oil Level - CheckDrive Shaft Spline (Center) - LubricateEngine Oil (High Speed) and Oil Filter - ChangeQuick Coupler - Lubricate

    Every 250 Service Hours or 3 Months

    Engine Oil and Filter - ChangePallet Fork - LubricateSteering Column Play - Check

    Pgina 2 de 4950H Wheel Loader M1G00001-UP (MACHINE) POWERED BY C7 Engine(SEBP4274 - 31) - D...

    18/08/2011https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/mediasea...

  • 7/25/2019 Intervalos de Manuteno 950H (S Em Ingls)

    3/4

    Every 500 Service Hours

    Transmission Oil Filter - Replace

    Every 500 Service Hours or 3 Months

    Differential and Final Drive Oil Sample - ObtainEngine Crankcase Breather - CleanEngine Oil (High Speed) and Oil Filter - ChangeEngine Oil and Filter - ChangeFuel System Primary Filter (Water Separator) Element - ReplaceFuel System Secondary Filter - ReplaceFuel Tank Cap and Strainer - CleanHydraulic System Biodegradable Oil Filter Element - ReplaceHydraulic System Oil Filter - ReplaceHydraulic System Oil Sample - ObtainTransmission Oil Sample - Obtain

    Every 1000 Service Hours

    Drive Shaft Support Bearing - Lubricate

    Every 1000 Service Hours or 6 Months

    Articulation Bearings - LubricateBattery Hold-Down - TightenCase Drain Screen (Strainer) (Steering Pump, Hydraulic Fan Pump, Motor) - CleanDrive Shaft Universal Joints - LubricateRoading Fender Hinges - LubricateRollover Protective Structure (ROPS) - Inspect

    Steering Pilot Oil Screen (Command Control Steering) - Clean/ReplaceTransmission Oil - Change

    Every 2000 Service Hours or 1 Year

    Brake Discs - CheckDifferential and Final Drive Oil - ChangeEngine Valve Lash - CheckEngine Valve Rotators - InspectHood Tilt Actuator - LubricateHydraulic System Oil - Change

    Hydraulic Tank Breaker Relief Valve - CleanService Brake Wear Indicator - CheckSteering Column Spline (Command Control Steering) - Lubricate

    Every Year

    Cooling System Coolant Sample (Level 2) - ObtainReceiver Dryer (Refrigerant) - Replace

    Every 3000 Service Hours

    Steering Column Spline (HMU Steering) - Lubricate

    Every 3 Years After Date of Installation or Every 5 Years After Date of Manufacture

    Seat Belt - Replace

    Pgina 3 de 4950H Wheel Loader M1G00001-UP (MACHINE) POWERED BY C7 Engine(SEBP4274 - 31) - D...

    18/08/2011https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/mediasea...

  • 7/25/2019 Intervalos de Manuteno 950H (S Em Ingls)

    4/4

    Every 6000 Service Hours or 3 Years

    Cooling System Coolant Extender (ELC) - Add

    Every 6000 Service Hours or 6 Years

    Cooling System Water Temperature Regulator - Replace

    Every 12 000 Service Hours or 6 YearsCooling System Coolant (ELC) - Change

    Copyright 1993 - 2011 Caterpillar Inc.

    All Rights Reserved.

    Private Network For SIS Licensees.

    Thu Aug 18 09:12:39 UTC-0300 2011

    Pgina 4 de 4950H Wheel Loader M1G00001-UP (MACHINE) POWERED BY C7 Engine(SEBP4274 - 31) - D...

    18/08/2011https://sis cat com/sisweb/sisweb/techdoc/techdoc print page jsp?returnurl=/sisweb/sisweb/mediasea