Livro de Composicao de Metais

8/7/2019 Livro de Composicao de Metais

1/42

Application-Specific means just that, IARMs that are read-

ly available in the physical forms necessary to supply the cali-

bration needs of your laboratory. In addition to our original thindisks for X-ray methods, all CRMs are available in physical

forms tailored to your specific applications; thick solid disk for

Optical Emission and Glow Discharge spectrometry, and chips

for wet chemical or solution instrumental techniques (ICP, AA,

etc.). Also, for combustion analysis, chips are available for car-

bon and sulfur analysis . Please see the reverse side of this bro-

chure for a list of the specific list of alloy CRMs selected for this

set, and their typical chemistries.

Popular Carbon & Low-Alloy Steels Se

IARMSINTERNATIONAL ANALYTICAL

REFERENCE MATERIALS

E-MAIL: [email protected]

WEB: WWW.ARMI.COM

TELEPHONE: (303) 216-2621

FAX: (303) 216-2649

700 CORPORATE CIRCLE, SUITE A

GOLDEN, CO 80401

USA

THE LEADER INAPPLICATION-SPECIFIC

CERTIFIED REFERENCE MATERIALS


2/42


3/42











Special Carbon & Low-Alloy Steels Se


REFERENCE MATERIALS


WEB: WWW.ARMI.COM

TELEPHONE: (303) 216-2621

FAX: (303) 216-2649


GOLDEN, CO 80401

USA




4/42

6-Piece Pre-Selected Special Carbon & Low-Alloy Steels SetAnalytical Reference Materials Internationals (ARMI) primary objective has been to develop and implemen

ndustry acceptable system for the characterization and certification of metal alloy materials. The resulting Ce

fied Reference Materials (CRMs) afford the scientific community an unequivocal level of confidence. Equ

mportant is our desire that the final certified results be traceable to national and/or international certifying bo

with emphasis on NIST.

Certificates of Analysis, for each CRM, can be downloaded from the ARMI website: www.ARMI.com.

Today, ARMIs inventory consists of more than 600 different CRMs that include carbon steels, low alloy stestainless and high temperature steels, nickel, cobalt, copper, aluminum, titanium, and hydrocarbon based mat

als. ARMIsCRMs (IARMs) can be found in the application laboratories of most of the major instrument ma

facturers around the world.

ARMI will also create custom alloy sets chosen from any of ARMIs CRMs to meet your specific needs

Finally, one of the major factors contributing to the success of the ARMI/ILAP program over the years has b

you, the analytical consumer. You have voiced your opinions as well as your needs. The personnel at AR

as well as the ILAP members, wish to sincerely thank you for your continued suggestions and support.

Grade Al As B C Co Cr Cu Mn Mo N Nb

Ni O P Pb S Si Sn Ti V W

CLA1 0.72 --- (0.0001) 0.004 0.006 0.032 0.88 1.57 0.009 0.0003 0.0

1.29 0.0005 0.004 (0.004) 0.07 0.019 0.002 0.002 0.78 1.44

CLA3 0.55 --- (0.0002) 0.003 0.004 0.014 0.64 1.29 1.08 0.0002 0.0

0.77 0.0006 0.005 (


5/42











Popular Tool Steels Set


REFERENCE MATERIALS


WEB: WWW.ARMI.COM

TELEPHONE: (303) 216-2621

FAX: (303) 216-2649


GOLDEN, CO 80401

USA




6/42

15-Piece Pre-Selected Tool Steel Set

Analytical Reference Materials Internationals (ARMI) primary objective has been to develop and implemen













Grade Al As B C Co Cr Cu Mn Mo N Nb

UNS# Ni O P Pb S Si Sn Ti V W Zr

AISI M-1 ** 0.01 0.007 0.002 0.86 0.28 3.6 0.13 0.257 8.1 0.034 (0.0

T11301 0.131 0.003 0.018 --- 0.002 0.37 0.006 0.003 1.22 1.7 (0.00

AISI M-2 --- --- --- 0.84 0.41 3.86 0.072 0.27 4.79 0.0251 0.0

T11302 0.18 0.0028 0.014 (0.0001) 0.006 0.39 (0.008) 0.004 1.83 5.98 ---

AISI M-4 0.01 0.016 (0.002) 1.398 0.129 4.1 0.13 0.33 5.16 0.044 0.0

T11304 0.131 (0.01) 0.014 (0.002) 0.058 0.58 0.011 0.003 3.9 5.5 (0.00

AISI M-50 ** 0.01 (0.004) (0.001) 0.83 0.010 4.1 0.043 0.208 4.2 0.004 0.00

T11350 0.12 0.0010 0.007 --- 0.0035 0.16 0.005 0.002 0.96 0.01 (0.00

AISI T-1 (0.006) --- --- 0.74 (0.040) 4.14 0.07 0.28 0.093 0.0096 0.00

T12001 0.080 (0.0125) 0.020 --- 0.023 0.28 (0.009) (0.004) 1.12 (17.26) ---

AISI H-11 0.01 (0.002) 0.0004 0.403 0.009 4.84 0.049 0.27 1.33 0.0067 0.00

T20811 0.083 0.0011 0.013


7/42











Popular CKD Low-Alloy Steels Set


REFERENCE MATERIALS


WEB: WWW.ARMI.COM

TELEPHONE: (303) 216-2621

FAX: (303) 216-2649


GOLDEN, CO 80401

USA




8/42

10-Piece Pre-Selected CKD Low-Alloy Steels SetAnalytical Reference Materials Internationals (ARMI) primary objective has been to develop and implemen













CKD# Al s Al t As B Bi C Co Cr Cu Fe Mn Mo N N

Ni P Pb S Sb Se Si Sn Ta Te Ti V W Z

180 --- (0.001) 0.001 --- --- (0.003) 0.003 0.013 0.006 (99.90) 0.047 0.001 (0.0028) (0.0

0.018 0.004 (0.0002) 0.0038 0.0004 --- 0.001 0.0011 --- --- --- --- (0.0001) -

181 0.014 0.016 0.029 0.0076 --- 0.240 0.050 0.669 0.095 (95.37) 0.988 0.395 (0.005) 0.0

0.737 0.042 0.0005 0.008 0.017 --- 0.445 0.122 0.042 --- 0.155 0.307 0.188 0.0

182 0.017 0.023 0.005 0.0003 --- 1.39 0.171 0.122 0.293 (94.59) 0.370 0.011 0.0049 0.0

2.82 0.008 --- 0.006 0.001 --- 0.126 0.004 0.000 --- 0.004 0.027 0.016 0.0

183 0.141 0.150 0.004 0.0005 --- 0.050 0.119 0.204 0.575 (94.44) 1.76 0.036 0.0036 0.0

1.10 0.010 --- 0.012 0.001 --- 1.03 0.0054 --- --- 0.003 0.004 0.347 0.0

184 0.016 0.022 0.006 0.0005 --- 1.013 0.007 2.33 0.089 (93.58) 2.23 0.016 0.0104 0.00.250 0.028 --- (0.01) 0.002 (0.008) 0.348 0.008 --- --- 0.010 0.017 (0.001) (0.0

185 0.054 0.060 0.022 0.0116 --- 0.566 0.032 0.032 0.179 (93.63) 0.715 0.123 0.0051 0.

3.84 0.024 0.002 (0.02) 0.011 --- 0.230 0.003 0.085 (0.005) 0.022 0.178 (0.001) 0.0

186 0.038 0.042 0.007 0.0009 --- 0.382 0.006 1.50 0.227 (93.12) 1.299 0.251 (0.005) 0.0

1.57 0.012 --- 0.007 0.002 --- 1.41 0.018 0.009 --- 0.044 0.020 0.054 (0.0

187 0.025 0.027 (0.007) 0.0006 0.003 0.119 0.071 3.51 0.036 (92.98) 0.529 0.565 0.0122 0.0

0.085 0.035 0.003 0.014 0.022 (0.004) 0.577 0.013 0.017 --- 0.099 0.558 0.67 0.0

188 0.083 0.093 (0.005) 0.0047 --- 0.332 0.006 5.11 0.057 (90.53) 0.169 1.28 0.0076 0.1

0.445 0.006 0.001 0.033 0.006 --- 0.775 0.005 0.022 (0.001) 0.034 0.802 0.091 0.0

189 0.039 0.041 0.080 0.0030 --- 0.175 0.007 1.065 0.060 (90.01) 0.262 0.837 (0.004) 0.0

5.34 0.032 0.002 0.051 (0.003) --- 0.286 0.029 (0.005) --- 0.326 0.054 1.30 0.0

( ) Indicates Non-Certified Value ** Certification in progress Note: Chemistries listed are typical


9/42











Popular CKD White Cast Irons Set


REFERENCE MATERIALS


WEB: WWW.ARMI.COM

TELEPHONE: (303) 216-2621

FAX: (303) 216-2649


GOLDEN, CO 80401

USA




10/42

9-Piece Pre-Selected CKD White Cast Irons Set














CKD# Al As B Bi C Ce Co Cr Cu Fe La Mg Mn Mo N

Nb Ni P Pb S Sb Se Si Sn Te Ti V W Zn Z

241 0.003 0.002 (0.001) 0.000 1.84 0.000 0.004 0.683 0.011 (93.2) 0.000 0.000 0.060 0.61 0.0

0.003 0.021 0.007 0.001 0.123 0.139 --- 3.15 0.003 --- 0.001 0.080 0.001 0.000 0.0

242 0.042 0.009 0.005 0.020 2.06 --- 0.004 0.031 0.040 (92.6) 0.000 0.000 0.189 1.21 0.0

0.009 0.022 0.044 0.027 0.028 0.005 (0.002) 2.81 0.010 (0.031) 0.28 0.46 (0.002) --- -

243 0.013 0.087 0.009 (0.001) 2.32 0.000 0.026 0.398 0.187 (93.0) 0.000 0.000 0.422 0.262 0.0

0.019 0.085 0.173 (0.055) 0.082 0.086 (0.055) 2.39 0.114 --- 0.023 0.154 0.029 0.018 0.0

244 0.019 0.040 0.093 0.000 2.57 0.018 0.049 0.360 0.308 (93.0) 0.009 0.025 0.68 0.056 -

0.006 0.336 0.022 0.002 0.011 0.004 --- 2.06 0.179 --- 0.019 0.002 0.052 0.026 0.0

245 0.038 0.006 0.003 0.009 2.95 --- 0.007 0.197 0.081 (92.5) --- 0.003 1.38 0.115 -0.029 0.194 0.42 0.020 0.035 0.052 (0.029) 1.59 0.076 (0.017) 0.110 0.055 0.020 --- 0.0

246 0.101 0.003 0.000 (0.001) 2.73 0.007 0.012 1.16 1.39 (92.6) 0.003 0.016 0.354 0.009 -

(0.001) 0.065 0.66 (0.002) 0.020 0.004 --- 0.76 0.002 --- 0.014 0.013 (0.011) --- 0.0

247 0.043 0.010 0.000 0.007 3.09 0.053 0.095 0.041 0.822 (92.7) 0.019 0.056 1.05 0.023 -

0.052 0.437 0.098 (0.002) 0.0034 0.005 --- 1.20 0.038 (0.008) 0.067 0.013 (0.002) 0.012 0.0

248 0.028 0.019 0.038 0.002 3.39 0.036 0.013 0.052 0.132 (93.0) 0.011 0.048 0.281 0.001 -

0.003 0.688 0.053 0.013 0.0035 0.017 (0.007) 1.78 0.016 (0.003) 0.133 0.162 0.011 0.008 0.0

249 0.056 0.018 0.018 (0.006) 3.76 (0.08) 0.011 0.093 0.479 (93.0) (0.023) 0.051 0.127 0.013 -

0.035 1.42 0.25 0.025 0.008 0.004 (0.003) 0.34 0.004 (0.002) 0.095 0.023 (0.01) 0.004 0.0



11/42











Popular Austenitic Stainless Steels Set


REFERENCE MATERIALS


WEB: WWW.ARMI.COM

TELEPHONE: (303) 216-2621

FAX: (303) 216-2649


GOLDEN, CO 80401

USA




12/42

13-Piece Pre-Selected Austenitic Stainless Steel Set














Grade Al B C Co Cr Cu Mn Mo N Nb

UNS# Ni O P S Se Si Sn Ti V W

AISI 301 0.007 0.0003 0.13 0.054 17.0 0.015 1.67 0.005 0.0032 0.00

S30100 7.14 0.011 0.006 0.0019 --- 0.59 (0.001) 0.028 0.010 (0.00

AISI 302 0.003 0.0005 0.069 0.058 17.80 0.52 1.50 0.117 0.0478 0.00

S30200 8.05 0.007 0.043 0.030 --- 0.630 0.0057 0.002 0.039 0.01

AISI 303 0.002 (0.0004) 0.068 0.309 17.35 0.51 1.87 0.583 0.0344 0.05

S30300 8.64 0.0049 0.032 0.378 --- 0.634 0.010 0.002 0.107 0.05

AISI 303Se 0.003 0.0003 0.041 0.088 17.90 0.223 1.50 0.348 0.0373 0.01

S30323 9.17 0.009 0.140 0.0089 0.21 0.50 0.01 0.002 0.106 0.10

AISI 304 0.003 0.0004 0.041 0.070 18.37 0.40 1.48 0.20 0.057 0.00

S30400 8.09 0.0087 0.043 0.028 --- 0.27 0.008 0.001 0.036 0.02

AISI 302 HQ 0.29 0.0005 0.103 0.20 17.99 3.01 1.35 0.004 0.067 0.09

S30430 8.05 0.0005 0.004 0.0011 --- 0.54 0.002 0.002 (0.003) 0.01

AISI 309 0.004 0.0003 0.066 0.078 22.28 0.130 1.573 0.195 0.037 0.01

S30900 14.88 0.015 0.023 0.027 --- 0.27 0.003 0.004 0.116 0.03

AISI 310 0.01 0.0003 0.064 0.098 23.95 0.230 1.69 0.224 0.039 0.01

S31000 19.3 0.0054 0.029 0.0017 --- 0.454 0.007 0.003 0.078 0.02

Alloy 254SMO** 0.015 0.0026 0.023 0.069 20.3 0.69 0.93 6.18 0.183 0.01

S31254 17.7 0.003 0.024 0.001 --- 0.55 0.008 0.003 0.052 0.02

AISI 316 0.005 (0.0005) 0.021 0.143 16.56 0.168 1.78 2.11 0.056 (0.00

S31600 10.38 0.0097 0.040 0.020 --- 0.458 0.004 0.008 0.029 0.01AISI 317L 0.006 0.0022 0.015 0.115 18.13 0.408 1.58 3.12 0.0158 0.00

S31703 13.19 0.0052 0.031 0.0082 --- 0.28 0.014 0.002 0.031 0.02

AISI 321 0.139 0.0005 0.046 0.148 17.25 0.238 1.67 0.383 0.011 0.04

S32100 10.49 0.0011 0.023 0.022 --- 0.489 0.007 0.49 0.144 0.02

AISI 347 0.004 0.0005 0.054 0.141 17.30 0.472 1.76 0.437 0.0151 0.72

S34700 9.19 0.0043 0.029 0.027 --- 0.36 0.007 0.003 0.062 0.07

( ) Indicates Non-Certified Value ** Certification in progress Note: Chemistries listed are typica


13/42











Popular Martensitic Stainless Steels Se


REFERENCE MATERIALS


WEB: WWW.ARMI.COM

TELEPHONE: (303) 216-2621

FAX: (303) 216-2649


GOLDEN, CO 80401

USA




14/42

11-Piece Pre-Selected Martensitic Stainless Steel Set
















AISI 410 0.014 (0.0003) 0.122 0.038 12.04 0.063 0.38 0.192 0.019 0.00

S41000 0.33 0.0039 0.021 0.029 --- 0.35 0.002 0.002 0.080 0.07

AISI 416 0.003


15/42


16/42

12-Piece Pre-Selected High-Temperature Steel SetAnalytical Reference Materials Internationals (ARMI) primary objective has been to develop and implemen















13-8 PH Mo 1.04 --- 0.038 0.020 12.32 0.032 0.059 2.11 0.0039 0.00

S13800 8.17 0.0010 0.006 0.003 --- 0.047 0.002 0.012 0.011 0.0

15-5 PH 0.004 (0.0007) 0.045 0.08 14.29 3.25 0.53 0.35 0.012 0.30

S15500 4.81 0.001 0.022 0.001 --- 0.41 0.01 0.003 0.054 0.02

17-4 PH 0.004 0.001 0.034 0.065 15.12 3.69 0.77 0.31 0.032 0.23

S17400 4.33 0.007 0.024 0.026 --- 0.45 0.0081 0.001 0.066 0.0

17-7 PH 1.19 0.002 0.075 0.17 16.94 0.31 0.76 0.51 0.026 0.03

S17700 7.22 0.0011 0.0230 0.0019 --- 0.361 0.0081 0.115 0.091 0.0

M-152 ** 0.01 0.001 0.11 0.021 11.3 0.061 0.71 1.61 0.035 0.02S64152 2.62 0.014 0.016 0.009 --- 0.23 0.004 0.002 0.29 (0.0

A286 0.25 --- 0.050 0.24 14.76 0.038 0.19 1.24 0.0064 0.02

S66286 25.06 0.0032 0.013 0.002 --- 0.16 0.003 2.03 0.28 0.06

Aermet 100 0.004 (0.0005) 0.24 13.5 3.00 0.007 0.018 1.21 0.0003 0.00

K92580 11.1 0.0006 0.002 0.0004 --- 0.02 (0.001) 0.009 0.01


17/42











Popular Duplex Stainless Steels Set


REFERENCE MATERIALS


WEB: WWW.ARMI.COM

TELEPHONE: (303) 216-2621

FAX: (303) 216-2649


GOLDEN, CO 80401

USA




18/42

6-Piece Pre-Selected Duplex Stainless Steel SetAnalytical Reference Materials Internationals (ARMI) primary objective has been to develop and implemen















Alloy 2101** 0.010 0.001 0.030 0.032 21.35 0.29 4.99 0.097 0.245 0.00

S32101 1.47 0.0024 0.018 0.001 --- 0.75 0.004 0.005 0.083 0.00

Alloy 2205 0.006 0.0014 0.023 0.071 22.25 0.207 1.30 3.25 0.17 0.00

S32205 5.61 0.004 0.023 0.0005 --- 0.34 0.006 0.0031 0.065 0.01

Alloy 2304** 0.01 0.002 0.026 0.067 22.45 0.21 1.26 0.25 0.12 0.0

S32304 4.11 0.004 0.029 0.001 --- 0.41 0.006 --- 0.05 0.02

Alloy 255 0.005 0.0030 0.028 0.037 25.74 1.63 1.01 3.14 0.253 0.01

S32550 6.07 0.017 0.023 0.0015 --- 0.40


19/42











Popular High-Manganese Steels Set


REFERENCE MATERIALS


WEB: WWW.ARMI.COM

TELEPHONE: (303) 216-2621

FAX: (303) 216-2649


GOLDEN, CO 80401

USA




20/42

7-Piece Pre-Selected High-Manganese Steel SetAnalytical Reference Materials Internationals (ARMI) primary objective has been to develop and implemen















Nitronic 50 0.01 0.003 0.033 0.057 21.03 0.38 5.0 2.10 0.265 0.13

S20910 11.99 0.0035 0.022 0.0042 --- 0.47 0.006


21/42











Popular Corrosion Resistant Nickels Set


REFERENCE MATERIALS


WEB: WWW.ARMI.COM

TELEPHONE: (303) 216-2621

FAX: (303) 216-2649


GOLDEN, CO 80401

USA




22/42

9-Piece Pre-Selected Corrosion Resistant Nickel Alloys SetAnalytical Reference Materials Internationals (ARMI) primary objective has been to develop and implemen













Grade Al B C Co Cr Cu Fe Mg Mn Mo N

UNS# Nb Ni O P S Si Ta Ti V W Z

Alloy C-22 0.283 (0.002) 0.0054 0.59 21.32 0.054 3.63 0.009 0.29 13.02 0.04

N06022 0.029 57.3 0.0013 0.006 0.0005 0.030 (0.06) 0.005 0.155 2.87


23/42











Popular High-Temperature Nickels Se


REFERENCE MATERIALS


WEB: WWW.ARMI.COM

TELEPHONE: (303) 216-2621

FAX: (303) 216-2649


GOLDEN, CO 80401

USA




24/42

15-Piece Pre-Selected High-Temperature Nickel Alloys SetAnalytical Reference Materials Internationals (ARMI) primary objective has been to develop and implemen















Alloy X 0.12 0.003 0.068 1.11 21.6 0.07 18.3 0.003 0.47 8.3 0.0

N06002 --- 48.8 0.002 0.011 0.0005 0.34 0.003 0.018 0.03 0.62 0.0

Haynes 230 0.35 0.0026 0.104 0.18 22.01 0.017 1.10 0.004 0.50 1.35 0.06

N06230 0.041 59.7 0.0009 0.006 0.0002 0.44 (0.01) 0.006 0.033 14.2 (0.0

RA 333 0.05 0.002 0.062 2.9 25.3 0.05 17.9 (0.001) 1.53 2.87 0.0

N06333 0.016 45.3 0.0035 0.015 0.0003 0.87 (0.01) 0.004 0.070 3.08 0.0

Alloy 600 0.34 0.0035 0.045 0.052 15.20 0.015 6.86 0.007 0.49 0.02 0.00

N06600 0.006 76.2 0.0009 0.005 0.0005 0.35


25/42











Popular High-Purity Nickels Set


REFERENCE MATERIALS


WEB: WWW.ARMI.COM

TELEPHONE: (303) 216-2621

FAX: (303) 216-2649


GOLDEN, CO 80401

USA




26/42

5-Piece Pre-Selected High-Purity Nickels SetAnalytical Reference Materials Internationals (ARMI) primary objective has been to develop and implemen













Grade Ag Al As B Be Bi C Ca Cd Co Cr Cu Fe Ga Mg M

Mo N Ni O P Pb S Sb Se Si Sn Te Ti Tl V Z

HPNi 0.1 11 0.1 (


27/42


28/42

8-Piece Pre-Selected Cobalt Alloys SetAnalytical Reference Materials Internationals (ARMI) primary objective has been to develop and implemen















Alloy 6B 0.13 (0.002) 1.10 57.0 29.0 0.014 2.47 (0.0004) 1.55 1.37 0.03

R30016 (0.008) 2.88 (0.004) 0.009 0.001 0.54 0.03 0.004 0.004 3.96 (0.0

MP35N 0.040 0.011 0.007 33.46 19.98 0.017 0.64 (0.0005) 0.015 9.62 0.00

R30035 0.043 35.19 0.0011 0.002 0.0027 0.053 0.007 0.91 0.011 0.028 0.0

F 75 0.07 0.002 0.052 64.0 27.55 0.01 0.29 0.0002 0.53 6.12 0.1

R30075 0.011 0.63 0.0010 0.008 0.0004 0.62 (0.02) 0.012 0.012 0.02 0.00

MP159 0.17 0.013 0.020 35.6 19.1 0.008 9.0


29/42











Popular Titanium Alloys Set


REFERENCE MATERIALS


WEB: WWW.ARMI.COM

TELEPHONE: (303) 216-2621

FAX: (303) 216-2649


GOLDEN, CO 80401

USA




30/42

15-Piece Pre-Selected Titanium Alloys SetAnalytical Reference Materials Internationals (ARMI) primary objective has been to develop and implemen













Grade Al C Cr Cu Fe H Mn Mo N

UNS# Nb Ni O Pd Si Sn Ta V Zr

Ti CP Grade 4 0.016 0.007 0.016 0.003 0.132 0.0018 0.002


31/42











Popular Wrought Copper Alloys Set


REFERENCE MATERIALS


WEB: WWW.ARMI.COM

TELEPHONE: (303) 216-2621

FAX: (303) 216-2649


GOLDEN, CO 80401

USA




32/42

18-Piece Pre-Selected Wrought Copper, Brass & Bronze Alloys Se














Grade Ag Al As Be Bi C Co Cr Cu Fe MnUNS# Nb Ni P Pb S Sb Se Si Sn Zn Zr

CDA 110 0.0011 --- (0.0001) ---


33/42


34/42

21-Piece Pre-Selected Cast Copper, Brass & Bronze Alloys SetAnalytical Reference Materials Internationals (ARMI) primary objective has been to develop and implement an indu

acceptable system for the characterization and certification of metal alloy materials. The resulting Certified Refere

Materials (CRMs) afford the scientific community an unequivocal level of confidence. Equally important is our de

hat the final certified results be traceable to national and/or international certifying bodies with emphasis on NIST.


Today, ARMIs inventory consists of more than 600 different CRMs that include carbon steels, low alloy steels, stain

and high temperature steels, nickel, cobalt, copper, aluminum, titanium, and hydrocarbon based materials. ARM

CRMs (IARMs) can be found in the application laboratories of most of the major instrument manufacturers around

world.

ARMI will also create custom alloy sets chosen from any of ARMIs CRMs to meet your specific needs.

Finally, one of the major factors contributing to the success of the ARMI/ILAP program over the years has been yo

he analytical consumer. You have voiced your opinions as well as your needs. The personnel at ARMI, as well as

LAP members, wish to sincerely thank you for your continued suggestions and support.

Grade Ag Al As Be Bi C Co Cr Cu Fe Mn

UNS# Nb Ni P Pb S Sb Se Si Sn Zn Zr

CDA 815 (0.01) 0.002 (0.001) --- --- 0.002 0.002 1.04 98.5 0.090 0.0C81500 --- 0.32 0.005 0.01 0.003 0.002 --- 0.02 0.01 0.014 --

CDA 836 (0.02) 0.002


35/42











Popular Wrought Aluminum Alloys Se


REFERENCE MATERIALS


WEB: WWW.ARMI.COM

TELEPHONE: (303) 216-2621

FAX: (303) 216-2649


GOLDEN, CO 80401

USA




36/42

18-Piece Pre-Selected Wrought Aluminum Alloys SetAnalytical Reference Materials Internationals (ARMI) primary objective has been to develop and implemen













AA No. B Be Bi Ca Cd Cr Cu Fe Ga Li Mg MNa Ni P Pb Sb Si Sn Sr Ti V Zn Z

1050 --- 0.0011 0.0082 0.0015 0.0013 0.017 0.038 0.30 0.022 0.0018 0.028 0.00.0011 0.021 0.0024 0.0084 0.0022 0.15 0.016 0.0022 0.029 0.020 0.044 0.00

1100 0.0023 0.001 0.0031 0.0016 0.0011 0.021 0.14 0.5 0.018 0.0014 0.0033 0.00.0019 0.0047 0.0031 0.0031 0.0033 0.1 0.0035 0.0016 0.027 0.02 0.029 0.0

2014 --- 0.0014 0.025 0.0025 0.0014 0.018 4.58 0.46 0.026 0.0018 0.45 0.80.0020 0.028 0.0038 0.023 0.004 0.88 0.037 0.0024 0.03 0.031 0.029 0.00

2018 --- 0.0011 0.021 0.0025 0.0012 0.028 4.14 0.34 0.02 0.0017 0.62 0.00.0009 2.15 0.003 0.017 0.0025 0.48 0.015 0.0026 0.027 0.016 0.03 0.00

2024 --- 0.001 0.008 0.0031 0.0011 0.028 4.55 0.25 0.022 0.0030 1.57 0.60.0026 0.031 0.0023 0.0077 0.003 0.25 0.015 0.0029 0.032 0.022 0.073 0.00

3003 --- 0.0011 0.0073 0.0017 0.0011 0.016 0.13 0.22 0.02 0.0021 0.0065 1.00.0025 0.02 0.0034 0.0086 0.0025 0.45 0.022 0.13 0.04 0.021 0.083 0.00

3004 --- 0.0012 0.0069 0.0038 0.0013 0.029 0.21 0.48 0.022 0.0019 1.24 1.20.0028 0.027 0.002 0.008 0.0035 0.23 0.013 0.0031 0.029 0.019 0.13 0.00

4043 --- 0.0042 0.02 0.0054 --- 0.026 0.053 0.33 0.03 0.0031 0.047 0.00.0056 0.052 0.003 0.03 --- 5.22 0.031 0.0023 0.045 0.014 0.05 0.0

4145 --- 0.0012 0.032 0.0023 0.0012 0.05 4.12 0.54 0.019 0.0016 0.05 0.00.0018 0.054 0.0033 0.031 0.0038 10.66 0.03 0.0031 0.046 0.02 0.058 0.00

4343 --- 0.0013 0.037 0.0028 0.001 0.032 0.05 0.5 0.023 0.0022 0.031 0.00.0027 0.029 0.0042 0.021 0.0042 7.84 0.018 0.011 0.031 0.026 0.05 0.00

4643 --- 0.004 0.02 0.0054 --- 0.027 0.036 0.16 0.029 0.0027 0.1 0.040.0047 0.035 0.004 0.02 --- 3.81 0.023 0.0021 0.053 0.012 0.03 0.00

5052 --- 0.0013 0.008 0.0037 0.0012 0.27 0.075 0.24 0.018 0.0040 2.59 0.00.0027 0.032 0.0013 0.0076 0.0029 0.19 0.02 0.0033 0.059 0.023 0.031 0.00

5083 --- 0.0012 0.008 0.0031 0.0012 0.15 0.078 0.34 0.022 0.0039 4.85 0.70.0039 0.03 0.0014 0.0077 0.0012 0.17 0.02 0.0033 0.027 0.021 0.05 0.00

5182 --- 0.0012 0.008 0.0031 0.0014 0.031 0.037 0.26 0.02 0.0028 4.96 0.30.0039 0.015 0.0014 0.009 0.0025 0.11 0.015 0.0024 0.051 0.02 0.05 0.00

6061 --- 0.0013 0.006 0.0039 0.0013 0.16 0.5 0.46 0.02 0.0029 1.1 0.10.0029 0.033 0.0027 0.007 0.002 0.63 0.14 0.0030 0.038 0.021 0.029 0.00

6063 --- 0.0012 0.0082 0.0029 0.0012 0.015 0.09 0.22 0.02 0.0018 0.59 0.00.0019 0.03 0.0022 0.008 0.0024 0.51 0.014 0.0027 0.0027 0.021 0.029 0.00

7050 --- 0.0013 0.021 0.0028 0.0011 --- 0.026 2.36 0.13 0.023 0.0032 2.50.0019 0.019 0.0015 0.021 0.0019 0.11 0.018 0.0036 0.051 0.021 6.3 0.1

7075 --- 0.0011 0.007 0.0034 0.0009 --- 0.22 1.75 0.17 0.019 0.0028 2.60.0029 0.027 0.001 0.0073 0.0026 0.19 0.014 0.0032 0.092 0.02 5.75 0.00



37/42











Popular Foundry Aluminum Alloys Se


REFERENCE MATERIALS


WEB: WWW.ARMI.COM

TELEPHONE: (303) 216-2621

FAX: (303) 216-2649


GOLDEN, CO 80401

USA




38/42

9-Piece Pre-Selected Foundry Aluminum Alloys SetAnalytical Reference Materials Internationals (ARMI) primary objective has been to develop and implemen













AA No. Be Bi Ca Cd Co Cr Cu Fe Ga Li Mg M

Na Ni P Pb Sb Si Sn Sr Ti V Zn Z

208.2 --- 0.019 --- --- --- 0.027 4.26 0.53 0.016 --- 0.022 0.0

--- 0.030 --- 0.021 --- 2.64 0.024 --- 0.15 0.014 0.039 -

295.2 --- 0.033 --- --- --- 0.031 4.48 0.39 0.020 --- 0.020 0.0

--- 0.032 --- 0.030 --- 0.85 0.033 --- 0.17 0.015 0.032 -

319 0.0012 0.027 0.0033 0.0011 --- 0.072 3.52 0.40 0.020 0.0023 0.34 0.

0.0022 0.072 0.0023 0.068 0.0027 7.62 0.064 0.0040 0.13 0.019 0.23 0.0

333 0.0012 0.019 0.0021 0.0012 --- 0.11 3.47 0.90 0.017 0.0022 0.14 0.

0.0028 0.15 0.0032 0.13 0.0039 9.7 0.17 0.0031 0.12 0.020 2.56 0.0

356.2 0.0011 0.0075 0.0040 0.0012 --- 0.020 0.069 0.18 0.019 0.0025 0.41 0.00.0025 0.019 0.0017 0.0081 0.0027 7.26 0.014 0.032 0.107 0.021 0.069 0.0

380.2 0.0010 0.049 0.0030 --- --- 0.019 3.61 0.41 0.030 0.0018 0.028 0.0

0.0027 0.060 0.002 0.050 0.0057 9.17 0.056 0.0023 0.052 0.033 0.064 0.0

390 0.0011 0.0029 0.0016 0.0014 (0.0016) 0.050 4.84 0.38 0.016 --- 0.62 0.0

--- 0.051 0.0037 0.0035 0.0028 17.70 0.046 --- 0.13 0.018 0.047 0.0

413.2 0.0013 0.029 0.0020 --- --- 0.020 0.042 0.37 0.025 0.0005 0.024 0.0

0.0006 0.025 --- 0.025 --- 12.12 0.026 0.010 0.020 0.013 0.024 -

850 --- 0.037 --- --- --- 0.046 0.99 0.35 0.016 --- 0.94 0.0

--- 1.82 --- (0.05) --- 0.57 7.33 --- (0.04) --- 0.037 -



39/42

Analytical Reference Materials InternationalCertificate ofAnalysis

CertifiedReference Material

700 Corporate Cr., Suite A Golden, Colorado 80401 Telephone (303) 216-2621 FAX (303) 216-2649

Grade: Alloy 718 / UNS N07718

Part Number (Q.A. NO.): IARM 56D

Certificate Date: 07/26/1999 Certificate No.: 56D-07261999-IARM-F Revision Date: 03/19/2003

Interpretation of Data

1. Certified values listed below reflect analysis results submitted by qualified analytical laboratories using a combination of methods and instrumentation

that emulate actual methods and instrumental techniques currently utilized in the analytical community.

2. Any data reported and enclosed by a parentheses ( ) is a "best estimate" and is NOT CERTIFIED. This data could not be quantified sufficiently fo

certification. It was however, reported by enough laboratories to be considered as potentially present in the matrix of the material being examined.

3. The "Inter-laboratory Analysis Program" (ILAP) utilized in the establishment of the data are an ongoing program with permanent membership. Certain

elements may be selected by a consensus of the members for more extensive testing. Therefore the data in brackets [ ]indicates further testing is in

process.

4. The " Confidence Interval at 95%" is enclosed by a parentheses ( ) below the individual element's concentration.

IMPORTANT: A "User Registration Card" accompanies all shipments. This card should be completed immediately upon receipt of material

with the appropriate user information. This is the only way in which ARMI can guarantee customer updates or possible dat

modifications!

Aluminum

0.60(0.01)

Boron

0.0044(0.0003)

Carbon0.041

(0.001)

Cobalt0.298

(0.007)

Chromium

18.37(0.03)

Copper0.063

(0.004)

Iron18.10(0.04)

Magnesium

0.0051(0.0004)

Manganese0.200

(0.005)

Molybdenum3.06

(0.02)

Nitrogen0.0084

(0.0007)

Niobium

5.22

(0.02)

Nickel52.8

(0.1)

Oxygen0.0014

(0.0003)

Phosphorus

0.010

(0.0006)

Sulfur0.0003

(0.0001)

Silicon

0.119(0.004)

Tantalum

0.007(0.001)

Tin

0.0019(0.0005)

Titanium

0.98(0.01)

Vanadium

0.033(0.002)

Tungsten

0.064(0.007)

Zirconium

(0.001)

The laboratories participating in the "Inter-Laboratory Analysis Program" (ILAP) and certification of this material are as follows:

Allegheny Ludlum Corp. - Brackenridge, PA Allvac - Monroe, NC

Allvac Lockport - Lockport, NY Anderson Laboratories, Inc. - Greendale, WI

AvestaPolarit Stainless OY - Tornio Finland Bodycote Metal Analysis, Inc. - Huntington Park, CA

Chicago Spectro Service Laboratories - Chicago, IL Haynes International, Inc. - Kokomo, IN

Howmet Dover Alloy - Dover, NJ Howmet Research Center - Whitehall, MI

Laboratory Testing, Inc. - Hatfield, PA Lockheed Martin Astronautics - Littleton, CO

Special Metals Corporation - Huntington, WV Special Metals Wiggin LTD. - Hereford, England

Traceability: All members of the "Inter-Laboratory Analysis Program" (ILAP) listed above validate test methods and instrument performance utilizing

SRMs produced by the National Institute of Standards and Technology, (NIST) as well as other CRMs and RMs produced by recognized Certifying Bodie

from around the world. The specific SRMs, CRMs and RMs applicable to the material covered by this certificate are: NIST C1251, 1159, 1160, 1186, 11871188, 1190, 1191, 1192, 1193, 1195, 1197, 1198, 1201, 1203, 1204, 1205, 1206/2, 1207/1, 1207/2, 1208/1, 1208/2, 1243, 1244, 1245A, 1247, 1271, 1762, 131F, 367, 6G, LECO

501, 502, 501-550, 502-256, 501-644, 502-016, NIST 16f, 123b, 134a, 135, 155, 160b, 168, 173b, 343a, 348a, 349, 349a, 361, 363, 364, 367, 661, 1187, 1208-1, 1254, 1765,

2165, c2402, 2423, 2424a, 2425a, 3167, LECO 401-553, 502-016, BS 718a, RV 7898, NIST 1249, IARM 56b, BS 718B, CT 642, LECO 501-674, 501-643, 501-644, NIST

1249, 3107, 3149, 3161, 3128, 3106, 3151, 131F, 3107, NBS 1208-1, 1208-2, 1249, BCS 351, IARM 56A, 56B, NBS C1151, C11525, C1153, C1154, 1155, 1193, 1194, 1195,

1230, C2400, JSS 650, 651, 652, 653,654, 655, BCS 331, 332, 333, 334, 335, 336, 337, 338, ARMCO 8709, 8710, 8711, CARTECH 440F, 303-SE, 316, 455, 630, 416C, 430F

D2, CUSTOM 450, NIST 865, 868, 2159, TMONF-500, TMGN-500, TVN-250, TWNF-250, TZRN-250, TASN-100, TBIN-250, TCAN-500, TLAN-100, TSBN-100, TPBN

250, TSEN-100, TSNN-500, TTAF-250, TYN-100, TZNN-500, LECO 501-644, 501-643, IARM 56A, LECO 501-505, 501-645, SPEX 6-38As, 5-94ZN, KD 760-3, BCS 351

NIST 1249, IAL REF R6975, LECO 501-503, 501-551, 501-102, 501-529, AR 546, IN 718, NIST 2402, 1198, 1247, 1208-1, 893, 348A, 126C, BAS 287-1, NR 2D, BAM 327

2BS 500, IARM 52B, 55A, 56C, 56D, 55B, SKF 100-1, 200S-1, AR 657, 661, 662, 654

A specific line of traceability is established to NIST and other Certifying Bodies for those elements that are noted as "Certified Values" on the Certificates of

Analyses referenced above.

See Reverse Side for Statistical Data and Additional Information Regarding this Material.


40/42

The following data and accompanying statements represent all pertinent information reported in the ILAP as it

applies to the chemical characterization of this material as of 3/19/2003.

56D Al B C Co Cr Cu Fe Mg Mn Mo N Nb Ni O P S Si

1 0.62 0.0052 0.040 0.3105 18.38 0.066 18.18 0.0045 0.193 3.08 0.0078 5.21 52.94 0.0011 0.008 0.0002 0.1155

2 0.575 0.0045 0.041 0.306 18.35 0.059 18.09 0.0049 0.209 3.045 0.0070 5.194 52.78 0.0010 0.010 0.0004 0.115

3 0.594 0.0045 0.0383 0.315 18.35 0.071 17.96 0.0053 0.207 3.026 0.0084 5.22 52.91 0.0011 0.009 0.0004 0.108

4 0.62 0.0043 0.0411 0.287 18.42 0.071 18.114 0.0052 0.194 3.06 0.0085 5.175 52.869 0.0012 0.011 0.0001 0.124

5 0.597 0.0039 0.042 0.296 18.382 0.058 18.11 0.0058 0.199 3.064 0.0095 5.20 52.86 0.0012 0.009 0.0001 0.126

6 0.599 0.0048 0.040 0.299 18.380 0.0643 18.10 0.0053 0.199 3.043 0.0080 5.20 52.75 0.0018 0.0093 0.0001 0.120

7 0.58 0.0046 0.039 0.304 18.39 0.0563 18.16 0.0054 0.208 3.05 0.0082 5.260 52.85 0.0023 0.011 0.0003 0.121

8 0.618 0.0045 0.040 0.314 18.39 0.067 18.00 0.0043 0.201 3.09 0.0100 5.27 52.742 0.0016 0.0104 0.0006 0.1255

9 0.599 0.0040 0.042 0.284 18.45 0.058 18.04594 0.2095 3.118 0.0092 5.2406 52.92 0.00091 0.009 0.00012 0.118

10 0.60 0.0040 0.0421 0.2922 18.300 18.199 0.1951 3.04 0.00705 5.226 52.9 0.00206 0.0080 0.000511 0.57638 0.0402 0.2830 18.33 18.11 0.190 3.107 5.226 52.685 0.0103 0.00025

12 0.6096 0.041 0.288 18.37 18.08 2.997 5.22 0.009

13 0.59 3.036 5.251 0.0108

14 0.588 3.06

15 3.103

Mean 0.5976 0.0044 0.0406 0.2982 18.3743 0.0634 18.0957 0.0051 0.2004 3.0613 0.0084 5.2225 52.8369 0.0014 0.0096 0.0003 0.1192

STDV. 0.0152 0.0004 0.0012 0.0116 0.0394 0.0057 0.0694 0.0005 0.0070 0.0332 0.0010 0.0275 0.0845 0.0005 0.0011 0.0002 0.0058

Certified 0.60 0.0044 0.041 0.298 18.37 0.063 18.10 0.0051 0.200 3.06 0.0084 5.22 52.8 0.0014 0.010 0.0003 0.119

95% C.I. 0.01 0.0003 0.001 0.007 0.03 0.004 0.04 0.0004 0.005 0.02 0.0007 0.02 0.1 0.0003 0.0006 0.0001 0.004

Methods X,I,O D,I,O C X,I,O X,W,I,O X,I,O X,W,I,O D,A,I,O X,I,O X,I,O F X,I,O X,W F X,I,O C X,I,O

Methods: W = Classical, C = Combustion, F = Fusion, A = AA or GFAA, I = ICP or DCP, D = DC Arc, O = OE, X = XRF, G=GDMS

56D Sn Ta Ti V W Zr Ag As Bi Ca H La Pb Sb Se Y Zn

1 0.0025 0.0072 1.00 0.030 0.0765 0.001


41/42

MASTER CALIBRATION SET

(IARM-MAST-100)

The IARM MAST-100 is a 100 piece Certified Reference Material

(CRM) Master Calibration Set intended for use by commerciallaboratories or any lab that analyzes several of the basic metal

alloys. The MAST-100 contains:

Stainless Steels

High Temperature Alloys

Carbon and Low Alloy Steel

Nickel Alloys Copper, Brass and Bronze

Cobalt Alloys

These CRMs can be used to create calibration curves or as Type

Standards for existing calibrations. Either way, these CRMs

provide the means to achieve excellent accuracy.

The MAST-100 is available in all three forms:

XRF (38 or 31mm x 2.25 or 8.5mm)

OE (38 or 31mm x 18.75mm)

Chips (65 or 100g bottles)

For both portable and bench top XRF instruments, the MAST-100is ideal for either alloy sorting or quantitative analysis.

Certificates of Analysis are supplied with each CRM.

The specific grade of each CRM in the MAST-100 Set is listed on

the reverse side of this sheet.


42/42

IARM-MAST-100

Stainless & High Temperature Steels

AISI 303 AISI 330 AISI 430 Nitronic 40 17-4 PH

AISI 304 AISI 347 AISI 431 Nitronic 50 17-7 PH

AISI 309 AISI 410 AISI 440C Nitronic 60 Duplex 2205

AISI 310 AISI 416 AISI 446 Greek Ascoloy 20Cb3

AISI 316 AISI 420 Custom 450 13-8Mo PH A286

AISI 321 AISI 422 Custom 455 15-5 PH AL-6XN

Carbon, Low Alloy Steels

Pure Iron AISI 1045 AISI 4140 AISI E6150 1-1/4Cr 1/2Mo

AISI 1018 AISI 1117 AISI 4340 AISI 8620 2-1/4Cr 1MoAISI 1030 AISI 1144 AISI 4620 AISI E9310 5Cr 1/2Mo

AISI 1040 AISI 4130 AISI 4820 AISI E52100 9Cr 1Mo

Copper, Brass & Bronze Alloys

CDA 110 CDA 482 CDA 630 CDA 715 CDA 922


CDA 314 CDA 510 CDA 655 CDA 857 CDA 937CDA 360 CDA 544 CDA 675 CDA 863 CDA 954


Nickel & Cobalt Alloys

Nickel 200 Alloy 625 Alloy 825 RA 333 Alloy G-30

Alloy 400 Alloy 690 Alloy 909 Waspaloy Alloy X

Alloy R405 Alloy 718 Haynes 230 Alloy B-2 Stellite 6b

Alloy 500 Alloy 750 Haynes 242 Alloy C-22 Stellite 25

Alloy 600 Alloy 800 Kovar Alloy C-276 Stellite 188

To meet your specific needs, substitutions for these specific alloys can easily be made

Livro de Composicao de Metais

Documents

Transcript of Livro de Composicao de Metais