Download - FTOOL - PUC-Riowebserver2.tecgraf.puc-rio.br/ftp_pub/users/lfm/ftool300tutorialframe.pdf · Ftool – Version 3.00 Copyright Aug. 2012 – Luiz Fernando Martha Tutorial for creation

Transcript
Page 1: FTOOL - PUC-Riowebserver2.tecgraf.puc-rio.br/ftp_pub/users/lfm/ftool300tutorialframe.pdf · Ftool – Version 3.00 Copyright Aug. 2012 – Luiz Fernando Martha Tutorial for creation

Prof. Luiz Fernando Martha - PUC-Rio Rua Marquês de São Vicente, 225 - CEP 22453-900 - Rio de Janeiro, RJ Tel. +55 21 2512-5984 - Fax. +55 21 3527-1848 - E-mail: [email protected] - URL: http://www.tecgraf.puc-rio.br/~lfm

FTOOL Tutorial for creation and analysis of a simple

frame and result visualization

Educational Version 3.00 August 2012

http://www.tecgraf.puc-rio.br/ftool

This file: http://www.tecgraf.puc-rio.br/ftp_pub/lfm/ftool300tutorialframe.pdf

FTOOL model:

http://www.tecgraf.puc-rio.br/ftp_pub/lfm/ftool300frame.ftl

Page 2: FTOOL - PUC-Riowebserver2.tecgraf.puc-rio.br/ftp_pub/users/lfm/ftool300tutorialframe.pdf · Ftool – Version 3.00 Copyright Aug. 2012 – Luiz Fernando Martha Tutorial for creation

Ftool – Version 3.00 Copyright Aug. 2012 – Luiz Fernando Martha

Tutorial for creation and analysis of a simple frame and result visualization 2

Users of this educational version are free to apply and re-distribute the program as they wish.

However, neither the author nor the PUC-Rio University or any other related institution is

responsible for the incorrect use of the program and its results. The author and PUC-Rio have no

legal responsibility for any damage caused directly or indirectly to a person or a company, resulting

from the application of any information or the utilization of the program. Users are responsible for

all conclusions made through the program. There is no commitment of satisfactory performance or

any kind of warranty.

Page 3: FTOOL - PUC-Riowebserver2.tecgraf.puc-rio.br/ftp_pub/users/lfm/ftool300tutorialframe.pdf · Ftool – Version 3.00 Copyright Aug. 2012 – Luiz Fernando Martha Tutorial for creation

Ftool – Version 3.00 Copyright Aug. 2012 – Luiz Fernando Martha

Tutorial for creation and analysis of a simple frame and result visualization 3

Table of Contents

Create a file for plane frame model (command "Save as... ") ................................................................................... 4 Specification of units and number formatting ........................................................................................................... 4 Grid of coordinates and grid point spacing with attraction (snap) ............................................................................ 5 Insertion of first member........................................................................................................................................... 5 Insertion of second member ...................................................................................................................................... 6 Insertion of third member.......................................................................................................................................... 6 Insertion of horizontal dimension line....................................................................................................................... 7 Insertion of left vertical dimension line .................................................................................................................... 7 Insertion of right vertical dimension line .................................................................................................................. 8 Creation of new material ........................................................................................................................................... 8 Selection of material type and name ......................................................................................................................... 9 Assignment of created material to all members ........................................................................................................ 9 Verification of member parameters and attributes using mouse right button.......................................................... 10 Creation of new cross-section for beam member .................................................................................................... 10 Selection of welded I-shape (NBR standard) for beam member............................................................................. 11 Definition of specific welded I-shape and assignment to beam member ................................................................ 11 Selection of members by empty cross-section property set (NONE) ...................................................................... 12 Creation of new cross-section for column members ............................................................................................... 12 Selection of welded I-shape (NBR standard) for column members ........................................................................ 13 Definition of specific welded I-shape and assignment to column members ........................................................... 13 Definition of pin support and assignment to left inferior node ............................................................................... 14 Definition of fixed support and assignment to right inferior node .......................................................................... 14 Insertion of a hinge at right top node ...................................................................................................................... 15 Alternative: insertion of hinge at right end of beam member.................................................................................. 15 Member deformation constraints menu and fence selection of all members .......................................................... 16 Turn on shear deformation and assignment to selected members ........................................................................... 16 Creation of uniformly distributed force load for beam member.............................................................................. 17 Definition of value of uniformly distributed force load and assignment to beam member in local system ............ 17 Creation of linearly distributed force load for left column...................................................................................... 18 Definition of values of linearly distributed force load and assignment to right column member in global system 18 Salve complete model in the same created file (command "Save") ........................................................................ 19 Visualization of model deformed configuration response....................................................................................... 19 Visualization of model axial force diagram response ............................................................................................. 20 Visualization of model shear force diagram response............................................................................................. 20 Visualization of model bending moment diagram response.................................................................................... 21 Visualization of support reactions........................................................................................................................... 21

Page 4: FTOOL - PUC-Riowebserver2.tecgraf.puc-rio.br/ftp_pub/users/lfm/ftool300tutorialframe.pdf · Ftool – Version 3.00 Copyright Aug. 2012 – Luiz Fernando Martha Tutorial for creation

Ftool – Version 3.00 Copyright Aug. 2012 – Luiz Fernando Martha

Tutorial for creation and analysis of a simple frame and result visualization 4

Create a file for plane frame model (command "Save as... ")

Specification of units and number formatting

Page 5: FTOOL - PUC-Riowebserver2.tecgraf.puc-rio.br/ftp_pub/users/lfm/ftool300tutorialframe.pdf · Ftool – Version 3.00 Copyright Aug. 2012 – Luiz Fernando Martha Tutorial for creation

Ftool – Version 3.00 Copyright Aug. 2012 – Luiz Fernando Martha

Tutorial for creation and analysis of a simple frame and result visualization 5

Grid of coordinates and grid point spacing with attraction (snap)

Insertion of first member

Page 6: FTOOL - PUC-Riowebserver2.tecgraf.puc-rio.br/ftp_pub/users/lfm/ftool300tutorialframe.pdf · Ftool – Version 3.00 Copyright Aug. 2012 – Luiz Fernando Martha Tutorial for creation

Ftool – Version 3.00 Copyright Aug. 2012 – Luiz Fernando Martha

Tutorial for creation and analysis of a simple frame and result visualization 6

Insertion of second member

Insertion of third member

Page 7: FTOOL - PUC-Riowebserver2.tecgraf.puc-rio.br/ftp_pub/users/lfm/ftool300tutorialframe.pdf · Ftool – Version 3.00 Copyright Aug. 2012 – Luiz Fernando Martha Tutorial for creation

Ftool – Version 3.00 Copyright Aug. 2012 – Luiz Fernando Martha

Tutorial for creation and analysis of a simple frame and result visualization 7

Insertion of horizontal dimension line

Insertion of left vertical dimension line

Page 8: FTOOL - PUC-Riowebserver2.tecgraf.puc-rio.br/ftp_pub/users/lfm/ftool300tutorialframe.pdf · Ftool – Version 3.00 Copyright Aug. 2012 – Luiz Fernando Martha Tutorial for creation

Ftool – Version 3.00 Copyright Aug. 2012 – Luiz Fernando Martha

Tutorial for creation and analysis of a simple frame and result visualization 8

Insertion of right vertical dimension line

Creation of new material

Page 9: FTOOL - PUC-Riowebserver2.tecgraf.puc-rio.br/ftp_pub/users/lfm/ftool300tutorialframe.pdf · Ftool – Version 3.00 Copyright Aug. 2012 – Luiz Fernando Martha Tutorial for creation

Ftool – Version 3.00 Copyright Aug. 2012 – Luiz Fernando Martha

Tutorial for creation and analysis of a simple frame and result visualization 9

Selection of material type and name

Assignment of created material to all members

Page 10: FTOOL - PUC-Riowebserver2.tecgraf.puc-rio.br/ftp_pub/users/lfm/ftool300tutorialframe.pdf · Ftool – Version 3.00 Copyright Aug. 2012 – Luiz Fernando Martha Tutorial for creation

Ftool – Version 3.00 Copyright Aug. 2012 – Luiz Fernando Martha

Tutorial for creation and analysis of a simple frame and result visualization 10

Verification of member parameters and attributes using mouse right button

Creation of new cross-section for beam member

Page 11: FTOOL - PUC-Riowebserver2.tecgraf.puc-rio.br/ftp_pub/users/lfm/ftool300tutorialframe.pdf · Ftool – Version 3.00 Copyright Aug. 2012 – Luiz Fernando Martha Tutorial for creation

Ftool – Version 3.00 Copyright Aug. 2012 – Luiz Fernando Martha

Tutorial for creation and analysis of a simple frame and result visualization 11

Selection of welded I-shape (NBR standard) for beam member

Definition of specific welded I-shape and assignment to beam member

Page 12: FTOOL - PUC-Riowebserver2.tecgraf.puc-rio.br/ftp_pub/users/lfm/ftool300tutorialframe.pdf · Ftool – Version 3.00 Copyright Aug. 2012 – Luiz Fernando Martha Tutorial for creation

Ftool – Version 3.00 Copyright Aug. 2012 – Luiz Fernando Martha

Tutorial for creation and analysis of a simple frame and result visualization 12

Selection of members by empty cross-section property set (NONE)

Creation of new cross-section for column members

Page 13: FTOOL - PUC-Riowebserver2.tecgraf.puc-rio.br/ftp_pub/users/lfm/ftool300tutorialframe.pdf · Ftool – Version 3.00 Copyright Aug. 2012 – Luiz Fernando Martha Tutorial for creation

Ftool – Version 3.00 Copyright Aug. 2012 – Luiz Fernando Martha

Tutorial for creation and analysis of a simple frame and result visualization 13

Selection of welded I-shape (NBR standard) for column members

Definition of specific welded I-shape and assignment to column members

Page 14: FTOOL - PUC-Riowebserver2.tecgraf.puc-rio.br/ftp_pub/users/lfm/ftool300tutorialframe.pdf · Ftool – Version 3.00 Copyright Aug. 2012 – Luiz Fernando Martha Tutorial for creation

Ftool – Version 3.00 Copyright Aug. 2012 – Luiz Fernando Martha

Tutorial for creation and analysis of a simple frame and result visualization 14

Definition of pin support and assignment to left inferior node

Definition of fixed support and assignment to right inferior node

Page 15: FTOOL - PUC-Riowebserver2.tecgraf.puc-rio.br/ftp_pub/users/lfm/ftool300tutorialframe.pdf · Ftool – Version 3.00 Copyright Aug. 2012 – Luiz Fernando Martha Tutorial for creation

Ftool – Version 3.00 Copyright Aug. 2012 – Luiz Fernando Martha

Tutorial for creation and analysis of a simple frame and result visualization 15

Insertion of a hinge at right top node

Alternative: insertion of hinge at right end of beam member

Page 16: FTOOL - PUC-Riowebserver2.tecgraf.puc-rio.br/ftp_pub/users/lfm/ftool300tutorialframe.pdf · Ftool – Version 3.00 Copyright Aug. 2012 – Luiz Fernando Martha Tutorial for creation

Ftool – Version 3.00 Copyright Aug. 2012 – Luiz Fernando Martha

Tutorial for creation and analysis of a simple frame and result visualization 16

Member deformation constraints menu and fence selection of all members

Turn on shear deformation and assignment to selected members

Page 17: FTOOL - PUC-Riowebserver2.tecgraf.puc-rio.br/ftp_pub/users/lfm/ftool300tutorialframe.pdf · Ftool – Version 3.00 Copyright Aug. 2012 – Luiz Fernando Martha Tutorial for creation

Ftool – Version 3.00 Copyright Aug. 2012 – Luiz Fernando Martha

Tutorial for creation and analysis of a simple frame and result visualization 17

Creation of uniformly distributed force load for beam member

Definition of value of uniformly distributed force load and assignment to beam

member in local system

Page 18: FTOOL - PUC-Riowebserver2.tecgraf.puc-rio.br/ftp_pub/users/lfm/ftool300tutorialframe.pdf · Ftool – Version 3.00 Copyright Aug. 2012 – Luiz Fernando Martha Tutorial for creation

Ftool – Version 3.00 Copyright Aug. 2012 – Luiz Fernando Martha

Tutorial for creation and analysis of a simple frame and result visualization 18

Creation of linearly distributed force load for left column

Definition of values of linearly distributed force load and assignment to right

column member in global system

Page 19: FTOOL - PUC-Riowebserver2.tecgraf.puc-rio.br/ftp_pub/users/lfm/ftool300tutorialframe.pdf · Ftool – Version 3.00 Copyright Aug. 2012 – Luiz Fernando Martha Tutorial for creation

Ftool – Version 3.00 Copyright Aug. 2012 – Luiz Fernando Martha

Tutorial for creation and analysis of a simple frame and result visualization 19

Salve complete model in the same created file (command "Save")

Visualization of model deformed configuration response

Page 20: FTOOL - PUC-Riowebserver2.tecgraf.puc-rio.br/ftp_pub/users/lfm/ftool300tutorialframe.pdf · Ftool – Version 3.00 Copyright Aug. 2012 – Luiz Fernando Martha Tutorial for creation

Ftool – Version 3.00 Copyright Aug. 2012 – Luiz Fernando Martha

Tutorial for creation and analysis of a simple frame and result visualization 20

Visualization of model axial force diagram response

Visualization of model shear force diagram response

Page 21: FTOOL - PUC-Riowebserver2.tecgraf.puc-rio.br/ftp_pub/users/lfm/ftool300tutorialframe.pdf · Ftool – Version 3.00 Copyright Aug. 2012 – Luiz Fernando Martha Tutorial for creation

Ftool – Version 3.00 Copyright Aug. 2012 – Luiz Fernando Martha

Tutorial for creation and analysis of a simple frame and result visualization 21

Visualization of model bending moment diagram response

Visualization of support reactions