Manual de Instruções para Chuveiro de Popa
RT2648/2658 Whale
Em caso dúvidas na instalação após a leitura do manual, favor entrar em
contato com nosso departamento técnico através do telefone ou email:
• (11) 3477-5655�
• email: [email protected]
Horários de atendimento:
Segunda-feira à quinta-feira: 8h – 18h
Sexta-feira: 8h – 17h
Rua Anhaia 982, Bom Retiro – SP
www.marineoffice.com.br
SWIM 'N' RINSESHOWER
READ CAREFULLY BEFORE INSTALLATION AND USE. NOTE: THIS PRODUCT ISSPLASH PROOF - NOT WATER PROOF.
To the fitter/User:
Ensure all relevant personnelread the points listed belowbefore installation and use ofthe equipment.
Application:
The Whale Swim 'n' RinseShower is intended to beused as a freshwater externalshower for rinsing off saltwater and sand. It is de-signed to be installed in aboat's transom, cockpit ornear the swim platform. Usefor any other purpose or withany other liquid is entirely atthe user's risk.
Before Installation:
1. Check that there is enoughroom for the shower hose toretract safely behind themounting surface.
(see Fig. 1).5. Feed unattached end ofhose through hole in housingfrom the front. Fit the smallwasher and tighten onto thetee-piece in the rear of theunit, prior to plumbing.6. As it is possible for a smallamount of water to tricklealong the shower hose whenin operation check that thereis no possibility of drips
2. The maximum effectivelength of shower hose is 6 ftor 1.8 metres. Check thatwhen the shower head is liftedout the hose will stretch to therequired height and distance.3. Check there is enoughroom to plumb the unit in andthe plumbing is accessible.4. Place large washer intoferrule on hose assembly andtighten onto shower handset
damaging electrical equip-ment, furnishings or contentsof locker.
Mounting:
1. Select a suitable locationand using the template sup-plied cut a rectangular hole (size 244.5 x 130.5 mm).2. Again using the templatedrill 6 holes (4.4 mm dia).3. For units with the hingedcover, the cover must beengaged in the hingesbefore fixing the shower inposition. Secure using thesix screws provided.4. Conceal the screw headswith the covers provided.
Plumbing:
1. Locate the existing watersystem pipework and plumbappropriate supply into tran-som shower.
Flexible Hose
The tail pieces are ½" NPTmale threaded. For ½" (13mm) hose attach Whale ½"NPT straight connector orelbow (AS0314) not supplied(see Fig.2.). Use stainlesssteel hose clips to secure.
Whale Semi-RigidPipework System
Screw on Whale female ½"threaded WX1532 pipeworkconnector (not supplied).Make sure the pipework isfully pushed home (see Fig.
Munster Simms Engineering Ltd.2 Enterprise Road, Bangor, BT19 7TA Tel: +44 (0)28 9127 0531 Fax: +44 (0)28 9146 6421
Web: www.whalepumps.com Email: [email protected]. No: 181.29 v3 0314
Maintenance
Regular inspection is recom-mended. Replacement com-ponents are available fromdealers or direct from themanufacturer.
Winterizing
To avoid damage as a resultof freezing, drain the entirewater system (ensuring thatthe flow selector is in one ofthe open positions whiledraining). Please consultyour dealer if in difficulty. Ifthey are unable to solve theproblem, contact Whale.
Fig. 1
WX1532Pipework Connector(for 15 mm O.D.semirigid pipe)
Warranty
This Whale product is cov-ered by 1 years warranty.Please see the encloseddocument for details of ourstatement of limited warranty.
Fig. 2
Optional Connectors
AS0314Straight Connector &Elbow Connector(for ½" Bore FlexibleHose)
Operation:
Safety: The off position onthe shower head shouldonly be used to shut offthe flow of water temporarilyas the shower head is not de-signed to withstand constantpressure. It is not a drip proofseal. (Note: Maximum oper-ating pressure is 50 psi).
Units with Hinged Cover
Hinges are designed to allowlid to be held open whenopened to a certain position.
Top Related