--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
www.irfansir.com | Call: 9820341855 | Playstore: Irfan sir: Mech | WhatsApp: 9820341855 | Email: [email protected]
Sem - VII: (Mech / Auto)
Refer the Last Three Pages for Subject and UT Toppers
Subject By At Starts Note Fee
Machine Design - II (GV)
Lecture Plan on Pg - 3 Irfan sir Dadar
Batch code: MD2
14th July’18
Every Saturday
8:45am - 1:5pm
New Topic of Helical Gear Design starts on 14th July’18. One design question on Spur Gear
has been completed by taking lectures between 4th July to 8th July
7000*
Mech. Utility Systems (G)
Also known as T.F.P.E - II
Duration 75hrs : Lecture Plan on Pg - 4
Irfan sir Dadar Batch code: MUS
22nd July’18
Every Sunday 5:30pm - 9:30pm
In order to complete the Heavy Syllabus of M.U.S, Extra lectures will be conducted on every Thursday
starting from 26th July’18, 7:15pm to 9:30pm
Last lecture will be on 14th Oct’18
8000*
CAD - CAM
Regular Batches Sanjay sir
Dadar Batch code: CAD
17th July’18 Every Tuesday
6:30pm - 9:45pm 8000*
Thane Batch code: CAT
13th July’18 Every Friday
6:30pm - 9:45pm 8000*
P.P.C (G)
Public Holiday Batch Sanjay sir Dadar
Batch code: PPC 15th Aug’18
Independence Day 8:45am - 1:15pm
Lecture Plan will be uploaded on 30th July 6500*
Op. Research
Public Holiday Batch Sanjay sir Dadar
Batch code: OR 15th Aug’18
Independence Day 8:45am - 1:15pm
Lecture Plan will be uploaded on 30th July 5500*
* Fees given above is for a student who joins that single subject only. Students joining more than one subject will be getting the benefit of Discounted Fees as shown on Page - 2.
G represents that these subjects are part of GATE and other competitive examination syllabus and V represents that they have VIVA Exam as well.
Note:
College’s start from 9th July’18. Vivas would be between 30th Oct’18 to 5th Nov’18. End Sem Exams would start approx from 20th Nov’18.
There won’t be any other batch apart from these by Irfan sir for Sem - VII i.e. there won’t be any new batch announced for MD - II and M.U.S. The lecture content has been
thoughtfully designed by him, so that the lectures do not become heavy for the student and at the same time the subject gets comfortably prepared throughout the semester, giving sufficient time for Revision and Doubt solving and simultaneously satisfying UT - 1 & UT - 2 syllabus as well.
All the varieties of Concepts, Derivations, Numericals & Viva based questions would be taken in the class itself. Full set of Revised & Updated Notes (Q. Set + Theory Notes booklet + Formula list booklet + Extra solved problem booklet + Paper solutions without a single mistake) for Nov’18 Exam would be provided. All the typical Questions from the Recent Mumbai University papers would be solved as well. There would be a 15 mins of Personal Doubt Solving Session at the end of every lecture. Tips & Tricks for improving the Quality of Attempt and Studying the Subject in a smarter way would be discussed throughout the lectures. Registered students will get access to all the features of Irfan sir App on Playstore. It’s the only app for Mechanical students of MU with maximum 5 stars (360 Five star rating as on 11th July’18).
We have a Consistent Track Record of having maximum number of students scoring 20/20 in their UT, 10 Pointers in their subject, 23+ out of 25 in their Viva and 75+ out of 80 in their End Sem Exam. We have produced maximum number of University and College Toppers in these subjects over the last 15 years.
The lectures have been designed in such a way that the student would be equipped to not only top his/her respective College & University but also to excel in all the competitive examinations like GATE, IES, UPSC, Engineering Olympiads, DRDO, ISRO etc along with confidently facing the Technical Interviews at the time of placement.
Address: Room - 112, 1st floor, Pearl Centre, Tulsi Pipe Road, Senapati Bapat Marg, Above Sadguru’s office, Dadar (w)
Pg - 1
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
www.irfansir.com | Call: 9820341855 | Playstore: Irfan sir: Mech | WhatsApp: 9820341855 | Email: [email protected]
Discounted Fee Structure
Combo Subject Combo Fees to be paid
1 MD - II + M.U.S 6500 + 7500
2 M.U.S + CAD-CAM 7800 + 7500
3 MD - II + M.U.S + CAD-CAM 6500 + 7500 + 7000
4 M.U.S + CAD-CAM + P.P.C 7600 + 7200 + 6000
5 MD - II + M.U.S + CAD-CAM + P.P.C 6500 + 7500 + 7000 + 5500
6 M.U.S + CAD-CAM + P.P.C + O.R 7500 + 7000 + 5000 + 4000
7 MD - II + M.U.S + CAD-CAM + P.P.C + O.R 6500 + 7500 + 7000 + 5000 + 3500
Note:
There is no compulsion of joining all the subjects of a particular combo together. Admission for the remaining subjects can be taken at a later stage as well (provided seats are available). As and when the student joins the remaining subject of the combo, he/she would be getting the entire benefit of discounted fees then.
Admission Details
Admission started for all the batches of the new semester. Students will be asked to show their college I-card in the second lecture for verification purpose, to assure that they are students of MU. Fees can be paid from the comfort of your home via BHIM App / Wallets / UPI etc by scanning the following code;
Fees can also be paid by Cash / Debit card / Credit Card / Online Fund Transfer / or by Cheque in favour of “COURSENX EDUTECH PRIVATE LIMITED”. Call on 9820341855 to fix up an appointment for admission. Alternately, if you cannot come for the admission for any reason, then you can pay the fees either by transferring funds or depositing cash in the following Bank Account;
Name: COURSENX EDUTECH PRIVATE LIMITED Current Account no: 124805000652
ICICI Bank, S. V. Road Branch, Santacruz (w), Mumbai.
RTGS / NEFT / IFSC code: ICIC0001248
Note:
Once you have made the payment, please send the Pic of the Receipt / Acknowledgement of fund transfer either on Whatsapp (9820341855) or mail it to us at [email protected] along with the following details;
Full Name of the student: College: Mobile no: Address: Subjects you want to join and its Batch codes (given in the timetable copy):
We would keep your I-cards aside. You can collect it from the staff when you come for the 1st lecture, by submitting the printout of the Receipt /Acknowledgement of Fund transfer / Deposit or showing the Pic / Sms of the same on your Mobile phone.
Admission can be taken on the 1st lecture also (provided seats are available). But the fees will be accepted only in cash.
Pg - 2
Pg - 3
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
www.irfansir.com | Call: 9820341855 | Playstore: Irfan sir: Mech | WhatsApp: 9820341855 | Email: [email protected]
Machine Design - II
Sem VII: Mechanical
Lecture Plan for students who could not join from 4th July’18 & would be joining from 14th July’18
In the initial 5 lectures, we revised points from TOM - 1, TOM - II and completed only one Design (i.e. of Spur Gear)
Lec Date Day Time Topics covered
Concepts + Design Questions: All types
Va
ca
tio
n
Pe
rio
d
1 4th July’18 Wed 5:30pm - 9:30pm
Design of Spur Gears (Completed)
It is 25% of the 1st Module
2 5th July’18 Thurs 5:30pm - 9:30pm
3 6th July’18 Fri 5:30pm - 9:30pm
4 7th July’18 Sat 5:30pm - 9:30pm
5 8th July’18 Sun 5:30pm - 9:30pm
Du
rin
g
Re
gu
la
r
Pe
rio
d
6 14th July’18 New topic starts Sat 8:45am - 1:15pm
Module - 1: Gear Design.....contd
Design of Helical, Bevel & Worm Gear set.
Single stage / Multi stage No. of teeth on Pinion & Gear, Material selection. Gear Design based on Beam Strength and Contact stresses. Check for Dynamic load using:
Barth Velocity method Buckingham’s method
Check for Wear load. Gear set proportion, Constructional details, Shaft design. Sketching the Gear pair in mesh. Thermal Analysis of Speed Reducers.
7 21st July’18 Sat 8:45am - 1:15pm
8 28th July’18 Sat 8:45am - 1:15pm
9 4th Aug’18 Sat 8:45am - 1:15pm
10 11th Aug’18 Sat 8:45am - 1:15pm
11 18th Aug’18 Sat 8:45am - 1:15pm
Module - 2: Rolling Contact Bearing
Ball Bearing:
Deep Groove Ball Bearing Angular Contact Ball Bearing Self Aligning Ball Bearing
Roller Bearing:
Cylindrical Roller Bearing Taper Roller Bearing Spherical Roller Bearing
Selection of Standard RC Bearing under;
Constant or Variable Load. Constant or Variable Speed. Constraint type selection
12 25th Aug’18 Sat 8:45am - 1:15pm
13 1st Sept’18 Sat 8:45am - 1:15pm
Module - 3: Hydrodynamic Bearing 14 8th Sept’18 Sat 8:45am - 1:15pm
15 15th Sept’18 Sat 8:45am - 1:15pm
Module - 5: Power Transmission Drives
V - Belt Drive Design:
Life Criterion method Manufacturer’s Catalogue method
Flat Belt Drive Design:
Life Criterion method Manufacturer’s Catalogue method
Chain Drive Design: Type - 1 & Type - 2 Numericals
16 22nd Sept’18 Sat 8:45am - 1:15pm
17 29th Sept’18 Sat 8:45am - 1:15pm
18 6th Oct’18 Sat 8:45am - 1:15pm
Module - 4: Cam Follower Design
Displacement, Velocity & Acceleration diagrams
Selection of Base circle radius & Roller radius
Selection of Spring stiffness & its design
Face width of Cam, Follower stem Design & Camshaft design 19 13th Oct’18 Sat 8:45am - 1:15pm
20 20th Oct’18 Sat 8:45am - 1:15pm
Module - 6: Clutch Design
Design of Plate Clutches (wet and dry type)
Driver & Driven shaft
Friction lining
Operating lever / Spring design
Thermal check
Design of Cone Clutch
23 27th Oct’18 Last Lecture
Sat 8:45am - 1:15pm
Note:
Please bring PSG Design Data book in every lecture. Complete set of Revised and Updated (for Nov’18 Exam) High Quality Study Material: Notes + Formula List + Solved Practice Problems + Smart Revision Guide + Paper Solutions, up to the latest paper of May’18 (without a single mistake) would be provided.
Pg - 4
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
www.irfansir.com | Call: 9820341855 | Playstore: Irfan sir: Mech | WhatsApp: 9820341855 | Email: [email protected]
Mech. Utility Systems: T.F.P.E - II
Sem VII: Mechanical
Master the Subject with Effectively Designed Lecture Plan for Regular Batch only at Dadar for Nov’18 Exam
Ideal Batch for scoring 20/20 in UT and 75+ out of 80 in End Sem Exam. M.U.S will cover all the concepts of Thermal and Fluid based Power Consuming Devices.
Lec Date Day Time Topics covered
Concepts + Formula Development + Numericals
1 22nd July’18 Sun 5:30pm - 9:30pm Reciprocating Compressors
Working Principle: Single and Double Acting Compressors Single Stage Compressor
With clearance Without clearance
Effect of clearance on F.A.D & Volumetric efficiency. Isothermal & Adiabatic Efficiency
Multi Stage Compressor
Optimum Intermediate Pressure Minimum Power consumption criterion Perfect / Imperfect Intercooling Aftercooler
Th
erm
al
Ba
sed
Ma
chin
es
2 26th July’18 Thurs 7:15pm - 9:30pm
3 29th July’18 Sun 5:30pm - 9:30pm
4 2nd Aug’18 Thurs 7:15pm - 9:30pm
5 5th Aug’18 Sun 5:30pm - 9:30pm
6 9th Aug’18 Thurs 7:15pm - 9:30pm
7 12th Aug’18 Sun 5:30pm - 9:30pm
Centrifugal & Axial Flow Compressor
Concepts of High Speed Flows & Total State Working Principle Velocity Diagram for Rotary Compressors Expression for Power consumption Different types of Efficiencies Impeller and Diffuser systems Design aspects of rotary compressors Surging, Choking & Stalling in rotary compressors Energy Conservation in Compressed Air system
8 16th Aug’18 Thurs 7:15pm - 9:30pm
9 19th Aug’18 Sun 5:30pm - 9:30pm
10 23rd Aug’18 Thurs 7:15pm - 9:30pm
11 26th Aug’18 Sun 5:30pm - 9:30pm
12 30th Aug’18 Thurs 7:15pm - 9:30pm
13 2nd Sept’18 Sun 5:30pm - 9:30pm
14 6th Sept’18 Thurs 7:15pm - 9:30pm Centrifugal Pumps
Working Principle & Priming of pumps Euler’s Equation, Velocity Diagrams for different cases, Manometric Head /
Efficiency Radial and Axial Thrust - Methods to balance them Pump System and System Characteristics Min. Speed required for starting the pump Multi Stage Pumps: Series and Parallel System Curve & Determination of Best Operating Point Cavitation in pumps - Thoma Cavitation factor Safe Height of installation of pump Available & Required N.P.S.H Self Limiting characteristics of centrifugal pump Energy Conservation in Pumping System
Hy
dra
uli
c B
ase
d M
ach
ine
s
15 9th Sept’18 Sun 5:30pm - 9:30pm
16 16th Sept’18 Sun 5:30pm - 9:30pm
17 23rd Sept’18 Sun 5:30pm - 9:30pm
18 27th Sept’18 Thurs 7:15pm - 9:30pm
19 30th Sept’18 Sun 5:30pm - 9:30pm
20 4th Oct’18 Thurs 7:15pm - 9:30pm Positive Displacement Pumps
Working Principle of Reciprocating pumps Concept of Slip Indicator Diagram: Single and Double Acting Effect of Acceleration Head & Frictional Head Safe Height of installation of pump Indicator Diagram with Air Vessels Saving in work due to use of air vessels Max. Safe speed at which reciprocating pumps can run Working principle of Gear Pumps, Sliding Vane Pumps etc
21 7th Oct’18 Sun 5:30pm - 9:30pm
22 11th Oct’18 Thurs 7:15pm - 9:30pm
23 13th Oct’18 Last Lecture
Sun 5:30pm - 9:30pm
Note:
M.U.S being concept based subject, all the required concepts of Thermal and Fluid Based subjects of previous semesters will be thoroughly revised before starting the corresponding topic. Tricks to easily draw and remember Velocity triangles & Indicator diagram will be discussed.
Complete set of Revised and Updated (for Nov’18 Exam) High Quality Study Material: Notes + Formula List + Solved Practice Problems + Smart Revision Guide + Paper Solutions, up to the latest paper of May’18 (without a single mistake) would be provided.
Syllabus completes much before your Termwork submission & Viva starts giving you sufficient time to revise.
No need to waste your precious time by coming for any Unplanned Extra lectures during your Exam Preparatory Leave.
Vivas would be conducted between 27th Oct’18 and 3rd Nov’18. Exams would approx. start from 20th Nov’18.
All our lectures are incorporated with features like E.M.R (Every Moment Revision) & E.M.D.S (Every Moment Doubt Solving, in the class & after the class).
24 x 7 Doubt solving on WhatsApp up to Exam time.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
www.irfansir.com | Call: 9820341855 | Playstore: Irfan sir: Mech | WhatsApp: 9820341855 | Email: [email protected]
Record Holders & College Toppers
Note:
Due to lack of space, we have included the names of only those students, who scored more than or equal to 90/100. We have a consistent Track Record of producing maximum number of University Toppers over the last 15 years.The Best score has been shown in red font. Every student that joins us not only clears the exam in the 1st attempt but also builds up crystal clear concepts.
Sem - III: Mech / Auto / Prod
Name College Subject Marks
Akshay B. Shinde V.C.E.T Thermodynamics 95 / 100
Mohd. Soheb M.HS.S Thermodynamics 93 / 100
Rahul Shah V.C.E.T Thermodynamics 93 / 100
Sahil Utekar V.C.E.T Thermodynamics 93 / 100
Akagra Gupta D. J. Sanghvi Thermodynamics 92 / 100
Arshad Shaikh M.HS.S Thermodynamics 92 / 100
Ishak Shaikh Rizvi Thermodynamics 92 / 100
Shaikh Furquan Rizvi Thermodynamics 92 / 100
Ankita J Sheoran V.C.E.T Thermodynamics 91 / 100
Jeet Manoj Bhatt V.C.E.T Thermodynamics 91 / 100
Prem Vipul K.J.Somaiya Thermodynamics 91 / 100
Sanidhya Mathur D. J. Sanghvi Thermodynamics 91 / 100
Benjamin Samuel D. J. Sanghvi Thermodynamics 90 / 100
S. M. Husain Rizvi Thermodynamics 90 / 100
Sem - V: Mech / Auto
Name College Subject Marks
Shrikant Swaminathan R.G.I.T Heat Transfer 97 / 100
Prathmesh A. Temkar LTCOE Heat Transfer 96/ 100
Mrinal Rane B.V.C.O.E Heat Transfer 95 / 100
Swapnil S. Kondgekar BVCOE Heat Transfer 94/ 100
Aniket Kadam L.R. Tiwari Heat Transfer 94 / 100
Dhanashree P. Shinde Rizvi Heat Transfer 93/ 100
Sahil Utekar VCET Heat Transfer 93/ 100
Alok J. Singh V.C.E.T Heat Transfer 93 / 100
Hardeep Singh Fr. Agnel Heat Transfer 93 / 100
Khan Mojib Theem Heat Transfer 93 / 100
Akbar Ali G. Husain M.H.S.S Heat Transfer 92/ 100
Amritlal Singh Sokhi K J Somaiya Heat Transfer 92/ 100
Aftab Sara Rizvi Heat Transfer 91/ 100
Jeet Manoj Bhatt VCET Heat Transfer 91/ 100
Devanshu Jhakal Thakur Heat Transfer 91 / 100
Omkar Vikas K.J.Somaiya Heat Transfer 91 / 100
Ankita J Sheoran VCET Heat Transfer 90/ 100
Omkar Desai Don Bosco Heat Transfer 90 / 100
Amritlal Singh Sokhi K J Somaiya Dynamics of Machinery 97/ 100
Omkar Nerurkar K J Somaiya Dynamics of Machinery 96/ 100
Hisham M. Tayyab Rizvi Dynamics of Machinery 95 / 100
Prashant Koparkar V.I.V.A Dynamics of Machinery 94 / 100
Kathan Mehta V.I.V.A Dynamics of Machinery 93 / 100
Raj Kishore V.I.V.A Dynamics of Machinery 93 / 100
Adnan M. Aslam M.H.S.S Dynamics of Machinery 92/ 100
Ankita J Sheoran VCET Dynamics of Machinery 92/ 100
Prashant Koparkar M.H.S.S Dynamics of Machinery 92/ 100
Shaikh Amir Hamza Rizvi Dynamics of Machinery 92/ 100
Adnan Tinwala M.H.S.S Dynamics of Machinery 91/ 100
Rohit R. Pandey R.G.I.T Dynamics of Machinery 91/ 100
Tanmay A. Dhuri Thakur Dynamics of Machinery 90/ 100
Nabil Shaikh Rizvi Dynamics of Machinery 90/ 100
Omkar R Sawant K.G.C.E Dynamics of Machinery 90 / 100
Shaikh Umer Talib R.G.I.T Dynamics of Machinery 90 / 100
Sonal V. Vajale V.I.V.A I. C. Engine 96 / 100
Abhishek Pal Rizvi MMC: Crash 89 / 100
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
www.irfansir.com | Call: 9820341855 | Playstore: Irfan sir: Mech | WhatsApp: 9820341855 | Email: [email protected]
Sem - VII: Mech / Auto
Name College Subject Marks
Waghela Pratik Hasmukh R.G.I.T Machine Design - II 92/ 100
Arshad Shaikh M.HS.S Mech. Utility System 97 / 100
Mohsin F. Sayyed LR Tiwari Mech. Utility System 91/ 100
Akshay B. Shinde V.C.E.T Mech. Utility System 90 / 100
Sneha More K. J. Somaiya CAD - CAM 92 / 100
Mohsin F. Sayyed LR Tiwari CAD - CAM 92 / 100
Mojib Khan Theem Op. Research 90 / 100
Address: Room - 112, 1st floor, Pearl centre, Above Sadguru’s, Opp. Vidyalankar’s office, S. B. Marg (Tulsi Pipe road), Dadar (w), Mumbai. Once out of Rly. Station (west side); take immediate right, 5 mins walking distance.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
www.irfansir.com | Call: 9820341855 | Playstore: Irfan sir: Mech | WhatsApp: 9820341855 | Email: [email protected]
Unit Test Toppers
Note:
Due to lack of space, we have included the names of only those students, who have scored 20/20. We have a consistent Track Record of producing maximum number of UT Toppers and students with 10 pointers. The reasons our students easily score 20/20 are;
Perfectly Designed Lecture Plan, that ensures timely completion of syllabus. All variety of Numericals (even from the latest MU papers) are solved in the class. Most expected Q’s are continuously discussed throughout the lectures. High Quality Study Material that does not give any opportunity to the person checking the paper to deduct even one mark. Guidelines given by Irfan sir helps a lot, to complete the paper on time.
Name Subject Sem College Batch Marks
Shaikh Emad Thermodynamics III MHSS Nov'17 20/20
Saurabh S. Shah Thermodynamics III Rizvi Nov'17 20/20
Ish Rakesh Raorane Thermodynamics III Thakur Nov'16 20/20
Yadav Ashish Hiralal Heat Transfer V DMCE Nov'17 20/20
Shadab Mukhtar Ahmed Heat Transfer V Rizvi Nov'17 20/20
Dhanshree P Shinde Heat Transfer V Rizvi Nov'17 20/20
Abhishek D. Puralkar Heat Transfer V KGCOE Nov'17 20/20
Kesharwani Akshay Heat Transfer V Saraswati Nov'17 20/20
Ankita Sheoran Heat Transfer V VCET Nov'16 20/20
Satyam T. Kadam Heat Transfer V BVCOE Nov'16 20/20
Jeet M. Bhatt Heat Transfer V VCET Nov'16 20/20
Vishal R. Chaurasia Heat Transfer V Thakur Nov'16 20/20
Pal Abhishek Heat Transfer V Rizvi Nov'16 20/20
Swapnil S. Kondgekar Heat Transfer V BVCOE Nov'16 20/20
Tanmay A Dhuri Heat Transfer V Thakur Nov'16 20/20
Shubham R. Bodke Heat Transfer V DRIEMS Nov'16 20/20
Prasad Ramu Patil Heat Transfer V VIVA Nov'16 20/20
Ankita Sheoran Dynamics of Machinery V VCET Nov'17 20/20
Shubham R. Bodke Dynamics of Machinery V DRIEMS Nov'17 20/20
Mohammed Nabil Dynamics of Machinery V Rizvi Nov'17 20/20
Mohammed Ishak Dynamics of Machinery V Rizvi Nov'17 20/20
Shadab Mukhtar Ahmed Dynamics of Machinery V Rizvi Nov'17 20/20
Prathmesh A. Temkar Dynamics of Machinery V LTCOE Nov'17 20/20
Mote Akshaykumar Dynamics of Machinery V DMCE Nov'17 20/20
Abhinesh Pandey Dynamics of Machinery V DMCE Nov'17 20/20
Kesharwani Akshay Dynamics of Machinery V Saraswati Nov'17 20/20
Shaikh Amir Hamza Dynamics of Machinery V Rizvi Nov'17 20/20
Shaikh M. Ibrahim Dynamics of Machinery V Rizvi Nov'17 20/20
Ashwin Sasichandran Dynamics of Machinery V DBIT Nov'17 20/20
Harsh K. Gada Dynamics of Machinery V St. John's Nov'17 20/20
Shardul S. Sathe Dynamics of Machinery V G. V. Acharya Nov'17 20/20
Tanmay A Dhuri Dynamics of Machinery V Thakur Nov'17 20/20
Giriraj P Jadeja Dynamics of Machinery V CSMIT Nov'16 20/20
Satyam T. Kadam Dynamics of Machinery V BVCOE Nov'16 20/20
Pal Abhishek Dynamics of Machinery V Rizvi Nov'16 20/20
Satyam T. Kadam I. C. Engines V BVCOE Nov'16 20/20
Prannoy Sandilyan Raj Machine Design - II VII Pillai Nov'17 20/20
Mahajan L. Vijay Machine Design - II VII BCOE Nov'17 20/20
Bhavesh Raja More Machine Design - II VII DMCE Nov'16 20/20
Swapnil S. Kondgekar Mech. Utility Sytems VII BVCOE Nov'17 20/20
Mahajan L. Vijay Mech. Utility Sytems VII BCOE Nov'17 20/20
Sarika M. Bankar Mech. Utility Sytems VII KGCE Nov'17 20/20
Shubham R. Bodke Mech. Utility Sytems VII DRIEMS Nov'17 20/20
Sagar Dilip Surve Mech. Utility Sytems VII DMCE Nov'16 20/20
Bhavesh Raja More Mech. Utility Sytems VII DMCE Nov'16 20/20
Mangesh S. Bhandarkar Mech. Utility Sytems VII Thakur Nov'16 20/20
Aaditya V. Salunke Mech. Utility Sytems VII LTCOE Nov'16 20/20
Shirke V. Shashikant Mech. Utility Sytems VII LTCOE Nov'16 20/20
Sairaj S. Kadam Mech. Utility Sytems VII BCOE Nov'16 20/20
Address: Room - 112, 1st floor, Pearl centre, Above Sadguru’s, Opp. Vidyalankar’s office, S. B. Marg (Tulsi Pipe road), Dadar (w), Mumbai.
Top Related