INSTITUTO DE ENGENHARIA DE ESTRUTURAS, … · Scientific Report 2011 Programmed Research for 2012...

INSTITUTO DE ENGENHARIA DE ESTRUTURAS,

TERRITÓRIO E CONSTRUÇÃO

Scientific Report 2011

Programmed Research for 2012

February 2012

INSTITUTO DE ENGENHARIA DE ESTRUTURAS,

TERRITÓRIO E CONSTRUÇÃO

Scientific Report 2011

Programmed Research for 2012

EXECUTIVE BOARD

Jorge Manuel Caliço Lopes de Brito

Nuno Miguel Rosa Pereira Silvestre

Alexandre Bacelar Gonçalves

PART I: UNIT DESCRIPTION

ICIST - Instituto de Engenharia de Estruturas, Território e Construção Report 2011

__________________________________________________________________________________________

1. UNIT DESCRIPTION

1.1 GENERAL DESCRIPTION

ICIST is one of the three research units of IST that work as a network on topics related to Civil

Engineering, Architecture, Territory and Environment, i.e. topics that have a strong relationship with

the economic sector of Construction and Civil Engineering. The other units of this network are

CEHIDRO (hydrology) and CESUR (urban planning and transportation). These units are mainly

composed of teaching staff of the Dep. of Civil Engineering, Architecture and Georesources (DECivil)

of IST, and they mostly work in the premises of DECivil. The functioning of these units as a Network is

made possible by a statutory structure of the DECivil, the Commission for Research and

Development, which plays the desired coordination role. The Presidents of the three Research Units

are members of that Commission. These research units share their Accounting Services.

The main statutory structure of ICIST is its Scientific Council, which is composed by all its permanent

PhD members. It approves yearly scientific reports and plans as well as financial reports and budgets.

Ultimately, it rules all relevant matters of ICIST. The research activity is developed by the 6 Groups in

which ICIST is divided. Each Group has a Coordinator, as described below. Secretarial support for

the group activities is frequently provided by personnel that also supports the teaching activities. The

Scientific Council may delegate some powers to a Permanent Committee, composed by the

Coordinators of the research Groups.

The leadership of ICIST, involving scientific, financial, personnel and management matters, is the

responsibility of an Executive Board composed by 3 members, one of which is the President, who

also presides to the meetings of the Scientific Council, the second one is the Vice-President in charge

of financial issues, and the third one is responsible for administrative and procedural issues. Currently

the Executive Board has the support of one secretary. The research and consultancy work makes use

of and financially contributes (directly or by means of ICIST subsidies for equipment or technician

salaries) to Laboratory structures of IST, namely: the Laboratories of Computational Mechanics,

Strength of Materials and Structures, Construction, Geotechnics, Geographical Information Systems,

Computational and Bioclimatic Architecture, Solar Cooling, and Seismological Laboratory. ICIST

researchers also share some Laboratory infrastructures created by the Re-equipment Program of

FCT (Fundação para a Ciência e a Tecnologia) and integrated, namely, in the Lisbon Biomechanics

Laboratory, the National Network of Advanced Computation, and the National Network of Geophysics.

1.2 TECHNICAL AND ADMINISTRATIVE STAFF

ICIST benefits from the support of several technical and administrative staff members, in various

computacional and experimental laboratories, as well as secretariat. Besides the staff presented in

Table 1, each research group is tipically supported by one secretariat staff member who shares

ICIST’s duties with those linked to DECivil’s activities.

ICIST - Instituto de Engenharia de Estruturas, Território e Construção Unit Description

__________________________________________________________________________________________

4

Table 1: Technical and administrative staff

Type Name Laboratory / Facility / Function

Technical staff Fernando Costa Laboratory of Strength of Materials and Structures (LERM)

Fernando Alves Laboratory of Strength of Materials and Structures (LERM)

Leonel Silva Laboratory of Construction (LC)

João Lopes Laboratory of Construction (LC)

José Alberto Reis Laboratory of Geotechnics (LABGEO)

José Castello Branco Laboratory of Computational Mechanics (LMC)

Pedro Costa LC / LERM / LABGEO Supervision

Administrative staff Ana Soares Ramos Secretary

2. GENERAL OBJECTIVES

ICIST has the purpose of developing scientific and technological research, promoting innovation and

development, scientific dissemination and consulting in the areas of its Research Groups presented in

Table 2 (with the Coordinators of each Group).

Table 2: Research Groups Co-ordinators

GROUP CO-ORDINATOR (2011)

Earthquake Engineering and Seismology António Sousa Gago

Mechanics, Modeling and Analysis of Structures Pedro Manuel de Castro Borges Dinis

Studies on Construction Fernando António Batista Branco

Structural Design and Geotechnics Luís Manuel Calado de Oliveira Martins

Information and Design Support Systems Francisco Afonso Severino Regateiro

Architecture Manuel de Arriaga Correia Guedes

The main objective of ICIST researchers is to carry out the research needed for the advancement of

the above mentioned areas of their expertise. The activities of ICIST are multidisciplinary, and link

applied research with the development of technology. To achieve these goals, the activities of ICIST

are directed to innovative developments and to the promotion of research within the academic

responsibilities of most of its members.

ICIST, due to the scope of its activities, also maintains a permanent link to the society, developing

consultancy-related activities in the areas of its Research Groups.

As a result of a process of internal discussion initiated in 2003, and taking into account the priorities of

the 7th Framework Program for Research (FP7, running up to 2013) in the European Union, the

following topics congregated a significant part of the research in ICIST in the five year period of 2007-


__________________________________________________________________________________________

5

2011:

A) Seismic Risk and Earthquake Engineering;

B) Monitoring, Conservation and Rehabilitation of the Built Heritage;

C) Sustainable Construction and Architecture;

D) Innovative Materials and Applications;

E) Structural and Geotechnical Analysis;

F) Information Technologies and Advanced Modeling Tools.

Topics A to D involve research activities in Structural Engineering, Construction and Architecture that

are in the core mission of ICIST. The specific issues that are studied in each Group are detailed in

subsequent parts of this report.

Topic A is addressed by Group 1 of ICIST, but it is also of interest to Groups 4 and 5. Different

aspects of the topic B interest virtually all the Groups 1 to 6. Topic C mainly concerns Groups 3 and 6.

Different aspects of topic D interest Groups 1, 2, 3, 4 and 6. Topic E is present in the research

activities of Groups 2, 3 and 4. Topic F is addressed in particular by Group 5. The above topics A to F

are addressed in various points of 5 Thematic Areas of FP7: Environment; Energy; Nanosciences,

Nanotechnologies, Materials and New Technologies of Production; Transports; and Information and

Communication Technologies. Specific calls for proposals have already been or will be opened where

those topics fit.

3. MAIN ACHIEVEMENTS DURING THE YEAR OF 2011

GLOBAL

Sustained progress in internationalization of the research developed at ICIST: the number of papers

in international peer-reviewed journals (ISI and Scopus-only) increased from 83 to 92 and in

international conferences from 154 to 179; a similar trend is also noticeable in the participation in

international projects, development of joint work, and membership of editorial boards. Two

international research projects were awarded: UPStrat.MAFA, CPLP and nine international ongoing

projects progressed significantly (MIAVITA, SHARE, EPOS-PP, REAKT, Maaximus, ATCoME,

NUMSIM, FUSEIS, ModelSim).

At the national level, ICIST also had a massive participation in the last FCT call for projects, and in

2011 five of these projects, having ICIST members as principal researchers, plus three others with

ICIST members’ participation, were awarded finantial support. Three other projects, from previous

calls, were effectively initiated in 2011.

The scientific activity of ICIST researchers has been awarded. In 2011 only, a total of 9 scientific

awards was recorded.

Group 1

Awarded the FCT project "Aquarel - Accurate QUAntification of Regional Earthquakes and

Earth structure: appLication to Western Iberia” (2012-2015, IST coordinator: Ana Ferreira);


__________________________________________________________________________________________

6

Significant progresses in the number of publications in international peer-reviewed journals,

and in presentations in international conferences;

Authorship of a book devoted to the seismic strengthening component of the "Parque

Escolar" programme.

Group 2

3 Doctoral Theses successfully completed;

Significant publication figures: 34 papers in international peer-reviewed journals and 43

papers in international conference proceedings;

Awarded the FCT project "Recycling & Seismic Protection: Sustainable High Performance

CFST Columns for Seismic Areas", (IST coordinator: Nuno Silvestre)

3 Awards: (i) UTL/Santander Totta Scientific Award 2010, given by the Technical University of

Lisbon in the scientific area of "Civil Engineering, Mechanical Engineering, Naval

Engineering, Mining and Geological Engineering, Aerospace Engineering, Territorial

Engineering, Transportation, Biomechanics" (N. Silvestre), (ii) Honour Diploma concerning

the UTL/Santander Totta Scientific Award 2010, given by the Technical University of Lisbon in

the scientific area of "Civil Engineering, Mechanical Engineering, Naval Engineering, Mining

and Geological Engineering, Aerospace Engineering, Territorial Engineering, Transportation,

Biomechanics" (D. Camotim) and (iii) Honour Diploma awarded by "Reitoria" of the Technical

University of Lisbon (D. Camotim).

Group 3

8 PhD theses and 53 MSc dissertations completed;

Significant publication figures: 29 papers in international peer-reviewed journals and 46 in

international conference proceedings;

1 QREN and 3 FCT projects awarded: "Tomography and rehabilitation of concrete structures"

(2011-2013, IST coordinator: Fernando Branco); "High Performance Recycled Aggregates

Concrete for the Precasting Industry" (2012-2015, IST coordinator: Jorge de Brito); "Fire

Protection of Reinforced Concrete Structural Elements Strengthened with CFRP Composite

Systems" (2012-2015, IST coordinator: João Ramôa Correia) and "NANORENDER -

Performance of silica nanoaerogel-based renders (2012-2015, IST coordinator: Inês Flores-

Colen);

6 Awards: (i) UTL/Santander Totta Scientific Award 2010, given by the Technical University of

Lisbon in the scientific area of "Civil Engineering, Mechanical Engineering, Naval

Engineering, Mining and Geological Engineering, Aerospace Engineering, Territorial

Engineering, Transportation, Biomechanics" (Jorge de Brito); (ii) Honour Diploma of the

UTL/Deloitte Young Researcher Award 2011 (José Dinis Silvestre); (iii) Prémio Inovação

Valorpneu (Miguel Bravo and Jorge de Brito); (iv) Best student paper award of the Annual

Conference of The International Emergency Management Society (Andreea Duţu, João


__________________________________________________________________________________________

7

Gomes Ferreira, Cristian Sandu); (v) Prémio Secil Universidades Engenharia Civil 2010 (Luís

Valarinho); (vi) Prémio IHRU 2011 for the best MSc dissertation (João Pedro Firmo);

Development of significant research and consultancy activities to external entities.

Group 4

Improvement in the number of publications in international peer-reviewed journals, as well as

in international conferences proceedings;

3 PhD theses and 30 MSc theses completed;

Participation in numerous editorial boards of international journals, in scientific committees

and organizing committees of conferences, and in working groups of international and

national associations.

Group 5

Substantial improvement in the number of publications in international peer-reviewed journals,

3 times the previous figures;

Continuation of the research with other national and international centres and institutions in

several ongoing projects, and extensive participation on project calls in 2011, at international

and national levels;

Conclusion of PhD theses of all permanent members of the group, enabling the exploration of

additional research areas.

Group 6

Noticeable growth in the figures of scientific production, especially in the publications at

international level in peer-reviewed journals (6) but also in conferences, with 36 participations;

Academic exchanges, participation in international scientific committees, research with

national/international centres/institutions in ongoing projects;

Increase in the number of PhD students;

Increase in the edition of books and book chapters.

4. ACTIVITIES - INTEGRATIVE/MULTIDISCIPLINARY ACTIVITIES DURING THE YEAR OF 2011

INTERNAL COHESION

The definition of the research topics A to F previously described has been the basis for a significant

part of the research in ICIST in the last years, taking into account the priorities of the 7th Framework

Program for Research (FP7) of the European Union, and putting together research interests from

different Research Groups of ICIST.

To that effect, ICIST researchers have been working internally in common scientific and technological


__________________________________________________________________________________________

8

projects, which extents the natural intersections of research topics arising from the co-supervisorship

of MSc and PhD theses. The following non-extensive list highlights the most relevant activities

occurred in 2011:

Group 1 researchers have activities with Group 2 (effect of the infill in arched structures) and

Group 5 (assessment of risk from volcanic impact on terrain and human activities,

investigation of geological faults using LiDAR for reassessment of seismic activity);

Group 2 researchers have activities with Group 1 (effect of the infill in arched structures),

Group 3 (structural behavior of GFRP beams and FRP pultruded footbridges), Group 4 (modelling

of cohesive fracture of concrete) and Group 5 (stability analysis and design of elliptical hollow

sections using artificial neural networks);

Group 3 researchers have activities with Group 2 (structural behavior of GFRP beams and

FRP pultruded footbridges) and Group 5 (virtual reality technology applied as a support tool to the

planning of construction maintenance);

Group 4 researchers have activities with Group 2 (modelling of cohesive fracture of concrete);

Group 5 researchers have activities with Group 1 (assessment of risk from volcanic impact on

terrain and human activities, investigation of geological faults using LiDAR for reassessment

of seismic activity), Group 2 (stability analysis and design of elliptical hollow sections using artificial

neural networks), Group 3 (virtual reality technology applied as a support tool to the planning of

construction maintenance) and Group 6 (historical analysis of the peninsular wars);

Group 6 researchers have activities with Groups 2 and 3 (solar roads, physical and

computational modeling of tensile structures) and Group 5 (historical analysis of the

peninsular wars).

5. INTERFACE WITH OTHER RESEARCH UNITS

Besides the work at internal level, ICIST researchers have developed, maintained and prospect

interfaces with many research units. The following is a non-extensive list of the institutions with which

ICIST researchers have developed joint work (besides academic theses advisorship) in 2011:

Group 1 researchers have activities with:

o International institutions: Univ. of Nice, Institut de Physique du Globe de Paris, UMR

Sisyphe, Univ. Pierre et Marie Curie, IFPEN (France), U. of California (USA), LMU

Munich (Germany), Univ. Michigan (USA). Univ. Oxford (UK).


o National institutions: Universities of Lisboa, Porto, Coimbra, Nova de Lisboa, Católica

Portuguesa and with the Dept. of Chemical Eng. of IST and LNEC;

o International institutions: Universities of Linköping (Sweden), INPG and INSA de


__________________________________________________________________________________________

9

Rennes (France), TUDelft (The Netherlands), Hong Kong and Fuzhou (China),

Budapest Univ. of Technology and Economics (Hungary), Imperial College (UK),

National Univ. of Singapore (Singapore), Western Sydney (Australia), Fed. Univ. of

Rio de Janeiro (Brazil), Patras (Greece), Polit. Torino (Italy) and the Czech Academy

of Sciences (Czech Republic).


o National institutions: LNEC, Univ. Madeira, Univ. do Porto and INEGI;

o International institutions: Universities EPFL (Switzerland) and Chalmers (Sweden).


o National institutions: Univ. Nova de Lisboa, Univ. de Coimbra, Univ. de Lisboa, Univ.

do Porto;

o International institutions: Universities Polit. Cataluña (Spain), Waterloo (Canada),

École Centrale de Paris (France) and SINTEF (Norway) and the Ministry for Univ.

and Research (Italy).


o National institutions: Agência de Inovação, Universidade Católica Portugesa,

CEHIDRO, CERENA, Univ. Algarve, LNEC and ARHTejo;

o International institutions: Universities UEF Rio de Janeiro (Brazil) and Frederick Univ.

(Cyprus), PNCM, ISCISA and Gorongosa Park (Mozambique), Canada Centre for

Remote Sensing (Canada).


o National institutions: Centro Português do Design, Instituto Açoriano de Cultura, Univ.

Coimbra, ISEG, FA-UTL, IDEM, INESC-ID, Junta Distrital de Lisboa, MNA, EPAL;

o International institutions: Universities of Chongqing (China), S.José (Macau), UC

Cataluña (Spain), Brasília (Brazil), IUAV (Italy), Reading (UK), Bío-Bío and Catholic

Univ. of Chile (Chile) and MIT (USA).


__________________________________________________________________________________________

10

6. ACTIVITY INDICATORS – SUMMARY TABLE FOR 2011

ACTIVITIES

Academic research work

Ph.D. theses Concluded 18

In progress 112

M.Sc. dissertations Concluded 128

In progress 172

Publications

Papers in peer-reviewed journals

International 92

National 3

Papers in other journals International 24

National 10

Papers in proceedings International 197

National 43

Books

Entire 1

Chapters 30

As editor 7

Reports 13

Consultancy projects and industry contract research projects 43

Collective guidance scientific work

Membership in Editorial Boards of Journals

International 48

National 9

Membership in Scientific Committees

International 97

National 37

Drafting of codes, Recommendations

International 37

National 26

Organisation of scientific events - Membership in Organising Committees International 37

National 17

Participation in Symposia and Conferences International 131

National 51

Participation in International events abroad 27

Research grants for research projects, sabbaticals, post-doc

International research grants

Submitted 6

Awarded 2

In progress 7

National research grants

Submitted 25

Awarded 10

In progress 37

Scientific cooperation International 56

National 57

Academic exchanges International 3

National 9

Models 1

Software applications 6

Pilot plants 0

Prototypes 2

Patents 2

PART II: RESEARCH GROUPS

ICIST - Instituto de Engenharia de Estruturas, Território e Construção Group 1 -EES

__________________________________________________________________________________________

13

RESEARCH GROUP – EARTHQUAKE ENGINEERING AND

SEISMOLOGY

RESEARCH GROUP CO-ORDINATOR – Prof. António Sousa Gago

PART I – RESOURCES

I.1 Budget

BUDGET (euros)

FCT Other Funding

STRATEGIC PROJECT

FCT

Projects

Int. R&D

Projects

Other research grants

Consultancy Total

13.562.55 104.972,18 0,00 2.100,00 86.339,12 206.973,85

I.2 Personnel

Name Academic Category

Eligible in 2011

Permanent Non-permanent

Scholarship Collaborator

Phd researchers

Ana Margarida Godinho

Ferreira

Assistant

Professor X X

António Ressano Garcia

Lamas

Full Professor

with

Aggregation

X

António Sousa Gago Assistant Professor

X

Carlos Alberto de Sousa

Oliveira

Full Professor

with

Aggregation

X X

Eliza Nemser Post Doc X X

Glenda Monroyo Besana-Ostman

Ciência 2008 X X

João Filipe Barros Duarte

Fonseca

Assistant

Professor X X

ICIST - Instituto de Engenharia de Estruturas, Território e Construção Group 1 - EES

__________________________________________________________________________________________

14


Eligible in 2011



João José Rio Tinto de

Azevedo

Full Professor

with

Aggregation

X

Jorge Miguel Proença Associate Professor

X

Luís Manuel Coelho

Guerreiro

Associate

Professor X

Maria Manuela Sousa

Mendes

Assistant

Professor X

Mário Manuel dos Santos

Lopes

Assistant

Professor X

Rita Maria do Pranto

Nogueira Leite Pereira Bento

Associate

Professor with

Aggregation

X X

Susana Pires Vilanova Ciência 2008 X X

MSc Researchers

Beatriz da Conceição Penhasco Massena Teles Claudino

X

Alexandre Chambel X

Carlos Augusto Fernandes Bhatt

X

Francisco Vítor Mota de Sá

Hélder Luís Martins Ferreira X

Helena Alves Meireles X

João Narciso X

Magda Sofia Paraíso Martins X

Marisa Isabel da Silva Costa X

Miguel Eduardo Branco X

Mónica Maria Lopes de Sequeira Amaral Ferreira

X

Pedro José Miranda da Costa

X

Graduate Researchers

Ana Lúcia das Neves da Silva Domingues

X

Ana Gabriela Simões X


__________________________________________________________________________________________

15


Eligible in 2011



André Belejo X

Jelena Milosevic X

Rita Peres X

Technical staff

Gonçalo Cruz X

Administrative staff

Inês Lopes

Patricia Pinheiro X

PERSONNEL - RESUMÉ

Type Permanent Non-permanent

Total Scholarship Collaborator

PhD researchers 13 1

MSc researchers 10 1

Graduate 5

Technical staff 1

Administrative staff 1

Others

Leadership

Since 1st January 2011, Prof. António Sousa Gago is the coordinator of the Earthquake Engineering

and Seismology Research Group. The group Ph.D. members meet formally twice a year to discuss

administrative and scientific subjects. In these meetings the coordinator reports the guidelines of the

Executive Board and other administrative issues, which are discussed by the members. The research

interests of the group are often discussed in these formal meetings, but the exchange of knowledge

and collaborations result manly from informal meetings that occur daily between group members. The

members working on “Structural Analysis and Design” and on “Rehabilitation and Conservation of the

Built Heritage” have adjacent offices, allowing frequent and easy contacts. The cooperation is very

strong and many members work simultaneously on those two scientific areas. The members working

on “Seismology” (except Ana Ferreira) work together in a different building, in the same campus, also

allowing frequent informal and easy contacts. Contacts between the coordinator and the most senior

member of the Group working on seismology take place on a regular basis, that, together with some

seminars promoted by members allow effective coordination.


__________________________________________________________________________________________

16

I.3 Technical Support

Facilities

The ICIST Group 1 research is supported by several computational and laboratory facilities. The

experimental facilities (LERM) and the computational facilities (LMC) booth located at IST campus are

shared with other research groups and are also used for teaching activities. The seismology

laboratory and the seismic networks are manly used for research proposes.

Experimental facilities and general experimental equipment belonging to Laboratory of Structures

and Strength of Materials (LERM);

Computational facilities of the Laboratory of Computational Mechanics (LMC);

Seismology Laboratory - ICIST operates a seismological laboratory belonging to the National

Geophysical Network. The Network is composed by 40 stations to monitor the moderate to strong

seismic activity in the Continent and in the Azores. With the FCT Programme of Re-Equipamento

21 more stations were acquired. These are 18 bit 3-component accelerometric stations with

common universal timing. They are implanted at the basement of small size constructions such as

Fire brigade headquarter or schools. One is a “downhole” instrument to study the influence of

sedimentary layers in the São Sebastião Crater, Terceira Island, Azores. 10 more stations were

acquired in 2010 in the framework of Re-Equipamento. They are also 18-bit 3-component

accelerometric stations to be used with internet connection to a central Data-Logger. All of them

are being installed in the Continent during the 2011-2012 periods. The older stations have been

upgraded in order to be support windows protocol. A few of them in the Azores are already

transmitting to a central Data-Logger. In the near future all the accelerometric stations will belong

to a National Accelerometric Network in close connection with the Accelerometric Stations of

Institute of Meteorology. This connection was strongly supported and promoted by FCT;

TAGUSNET and NAVIGATORS seismic networks - seismographic stations currently operating:

Monsanto, Alcochete, Alvares and Torkoz (Morocco) (real-time, telemetric transmission), and

Azambuja, Mafra, Palmela, Vialonga, Sesimbra, Azores (Algar do Cavão), Camacha (Madeira),

and Tanger (Morocco) (recording).

I.4 Activity indicators – Summary table for 2011

ACTIVITIES Fact. No.


Ph.D. theses Concluded 1 1

In progress 9 10

M.Sc. dissertations Concluded 10.5 11

In progress 9 9

Publications Papers in peer- International peer- 13.5 15


__________________________________________________________________________________________

17

reviewed journals reviewed journals (ISI/Scopus)

National peer-reviewed journals

- -

Papers in other journals

International - -

National 3.33 4

Papers in proceedings

International 24,967 26

National 1 1

Books

Entire 1 1

Chapters 3 3

As editor - -

Reports 1




International 8

National -


International 8

National -


International -

National 1

Organisation of scientific events - Membership in Organising Committees

International 7

National -


National 1




Submitted -

Awarded -

In progress 3


Submitted 3

Awarded 2

In progress 6


National -

Academic exchanges International -

National -


__________________________________________________________________________________________

18

Awards (national and international) -

Refereeing for international journals 23

Refereeing for funding agencies (national and international) 2

Lectures by invitation in international conferences (plenary, keynote) 1

Lectures and/or organization of scientific or technical workshops, seminars, courses and similar (national and international)

11

Models -

Software applications -

Pilot plants -

Prototypes -

Patents -

Fact. = Factorised / No. = Total number of items


__________________________________________________________________________________________

19

PART II – ACTIVITY REPORT

II.1 Objectives and Achievements

A. General Objectives (2011)

Continuing involvement in the "Parque Escolar" programme and publication of a book devoted to the

seismic strengthening component of that programme. Study of different and alternative techniques for

seismic strengthening of load bearing masonry wall structures. Solutions ranging from the “reinforcing

plastering mortar” technique to those using GRFP meshes or strips will be studied, both numerically

and experimentally. These studies will be carried out within the framework of privately funded

research projects (Parque Escolar and STAP, SA)

Seismic risk assessment of healthcare buildings will prospectively be devoted to the application of the

ICIST/ACSS methodology to some representative healthcare facilities. Apart from the relative seismic

risk evaluation, “as is”, this task is targeted at the dissemination of knowledge and expertise among

the professional sector and subsequent feedback and validation. The Portuguese Health Ministry also

expects to take some conclusions that will guide the definition of future long-term sustained policies

for seismic risk reduction of existing healthcare facilities.

Structural characterization and classification of Lisbon’s old masonry buildings and development of

fragility curves based on the definition of old buildings classes. The development of such curves is

essential as input for any loss estimation model currently being developed for the site. For such aim,

analytical models will be developed for each building class based on modelling approaches

appropriate for masonry structures. Given the scarce knowledge and data about the seismic

behaviour of old Lisbon masonry buildings, experimental testing on relevant structural elements will

be performed. Wall specimens will be tested under static cyclic and monotonic horizontal loading. The

obtained results will enable structural characterization of the specimens, the identification of failure

modes and the calibration of analytical models.

Performance assessment of the “Adaptive Capacity Spectrum Method” in 3D irregular buildings. The

method will be improved and the new version will be compared with other proposed NSP (it is

expected to obtain better simulations of the irregular 3D structures seismic behavior).

Seismic vulnerability assessment (and proposal of strengthening procedures) of critical infrastructures

in water lifeline systems.

Tectonics and Seismology studies, which have as main goal the improvement of seismic hazard

assessment in Iberia and the understanding of Earth processes and features on a global scale. Main

study topics are: a) the study of ground motion propagation in Western Iberia; b) the study of crustal

structure of Western Iberia; c) the characterization of site effects in Western Iberia d) the

characterization of seismic activity through the operation of seismic stations; e) characterization of

fault activity through active tectonics studies and remote sensing data (LiDAR). A global compilation


__________________________________________________________________________________________

20

of earthquake source models using satellite (InSAR) data and the confrontation of InSAR earthquake

models with those obtained using standard seismological techniques were also important research

goals.

Continuing investigating of long-period (surface wave and normal mode) signals in rotation data,

notably using more advanced 3D modelling tools. Complete the ongoing synthetic tests of earthquake

modelling techniques based on the Spectral Element Method).

Seismological study of Mozambique (FCT project MOZART) in cooperation with Direcção Nacional de

Geologia, Maputo.

Based on the active faults identified under project RETURN, more fieldworks and trenching activities

will be undertaken to determine more prehistoric events. Samples will be sent for processing and age

determination. With the newly established active trace, hazards assessment using this length and

location would be undertaken for Lisbon and cities situated in Lower Tagus valley.

Following the successful submission and approval of the proposal FINDER, LiDAR data will be

acquired along the Lower Tagus Valley Fault Zone (LTVFZ) to determine its location with higher

accuracy and resolve other possible splays. From LiDAR data, very high-resolution DEM will be

generated to measure and assess important morphometric indices that would help better characterize

the activity of LTVFZ.

Under project SCENE we will acquire a set of 25 seismic reflection profiles in order to characterize the

seismic velocities of the soil column underneath the accelerometer stations. These data acquisition

will be performed in cooperation with INETI.

B. Main Achievements (2011)

The involvement in the "Parque Escolar" programme and the publication of a book devoted to the

seismic strengthening component of that programme were important achievements in 2011.

The study of different and alternative techniques for seismic strengthening of load bearing masonry

wall structures was carried out within the framework of privately funded research projects (Parque

Escolar and STAP, SA).

Seismic risk assessment of healthcare buildings and of critical infrastructures in water lifeline systems

was successfully performed.

In the development of fragility curves for old Lisbon masonry constructions and in the corresponding

experimental testing the following tasks of the SEVERES research programme were fully or partially

completed:

Task 1: Characterization and classification of Lisbon old buildings (typical masonry Lisbon

buildings – the Pombalino’s and the Gaioleiro’s buildings – were extensively analysed and

characterized. The structural, constructive, architectural and historical issues were used to

define the buildings classes);


__________________________________________________________________________________________

21

Task 2: Experimental campaign on specific relevant structural components (diagonal

compression tests and triplet tests were performed on masonry specimens to assess the stone

masonry shear strength. Double flat jack tests were performed in situ to evaluate the

compression strength of traditional stone masonry);

Task 3: Development and definition of capacity curves for each building class;

Task 4: Derivation of the fragility curves.

In the performance assessment of the “Adaptive Capacity Spectrum Method” in 3D irregular buildings

the following tasks of the 3Disp research programme were fully or partially completed:

Task 1 Study of nonlinear static procedures;

Task 2 Study of the modeling influence on the nonlinear simulations by seismic static and

dynamic analysis of 3D irregular structures;

Task 3 Performance verification of the generalized pushover curve for 3D irregular structures;

Task 4 Comparison of the Modal Pushover Analysis (MPA) vs. improved MPA on the seismic

assessment of 3D irregular structures;

Task 5 Comparison of different nonlinear static procedures on the irregular 3D building’s

assessment;

Task 6 Development of a new version of the Adaptive Capacity Spectrum Method (ACSM) for

the seismic assessment/design of irregular 3D buildings;

Task 7 Nonlinear static procedures for irregular bridges.

In the framework of FP7 project SHARE a new seismic source zone model and a database on active

faults for IBERIA were delivered.

Under Project RETURN numerous remote-sense data were analyzed, including aerial photographs

and SRTM-derived DEM, and under Project FINDER an 80km long active fault was identified in the

Lower Tagus Valley. Fieldworks and trenching activities were undertaken in selected sites and at

least 10 samples were collected in Pombalinho and Vale de Figueira. Several soil samples were also

processed through C14-dating analysis to estimate the age of the deformation.

Following the activities of SCENE 15 reflection seismic profiles were acquired in collaboration with

LNEG to characterize the shear-wave velocity within the upper 30m. A preliminary site-effects model

was developed and is being tested for the Algarve region. Five sites were selected for multi-method

analysis in order to address the uncertainty of shear wave profiles and its propagation through the

seismic hazard modeling. In parallel, the validity of pan-regional ground motion models for use in

seismic hazard analysis in Western Iberia was addressed using regional ground-motion data for

moderate magnitude earthquakes, and intensity data for large historical earthquakes.

In the scope of project MOZART, thirty long-period seismic stations were deployed in Mozambique and

South Africa in order to monitor the seismic activity associated with rifting processes in the region.


__________________________________________________________________________________________

22

The preparation of 15WCEE had great advances during 2011. Several member of ICIST as members

of the Local Committee had important roles in the advancement of the preparations, which can be

summarized in the following:

1. Definition of the Scientific Committee in charge of the reviewing process of all submitted

Abstracts (total of approximately 6000);

2. Definition of the Scientific Programme of the Conference;

3. Establishment of the main objectives of the Conference beyond the presentation of papers and

publishing them in the Proceedings;

4. Definition of the Keynote and Invited Speakers;

5. Definition of a policy for the Image and Communication of the Conference both at the national

and international level;

6. And definition of a policy to attract sponsors to the Conference.

II.2 Future Research

General Objectives (2012)

The study of the behaviour of masonry structures submitted to dynamic actions will continue to be one

of the major research lines of the group. The structural behaviour of infrastructures and old buildings,

(housing buildings and critical buildings - e.g. hospitals) will bee study to identify damages and

adequate reinforcement solutions. Numerical modelling and its calibration with experimental data is

also a research issue to continue.

In the development of fragility curves for old Lisbon masonry constructions and in the corresponding

experimental testing the following tasks will continue: Experimental campaign on specific relevant

structural components (cyclic shear tests on masonry panels will be performed on laboratory and

shear tests with flat jacks will be performed in situ); Development of capacity and fragility curves for

each building class; Study of strengthening strategies.

In the performance assessment of the Adaptive Capacity Spectrum Method in 3D irregular buildings

the research will be finalized by the conclusion of the followings tasks: Study of nonlinear static

procedures; Study of the modeling influence on the nonlinear simulations by seismic static and

dynamic analysis of 3D irregular structures; Performance verification of the generalized pushover

curve for 3D irregular structures; Comparison of the Modal Pushover Analysis (MPA) vs. improved

MPA on the seismic assessment of 3D irregular structures; Comparison of different nonlinear static

procedures on the irregular 3D building’s assessment; Development of a new version of the Adaptive

Capacity Spectrum Method (ACSM) for the seismic assessment/design of irregular 3D buildings;

Nonlinear static procedures for irregular bridges.

The study of earthquakes using joint analyses of satellite (InSAR) and seismic data is an objective for


__________________________________________________________________________________________

23

2012, as well as, the study global subduction earthquakes using sophisticated modelling of normal

mode data, notably taking mode splitting and coupling into account.

In 2012 the investigation of long-period (surface wave and normal mode) signals in rotation data

(notably using more advanced 3D modelling tools) will continue together with the improvement of the

investigation of Earth structure (notably of seismic anisotropy, using a wide range of seismic data).

It will be developed a regional model to address site effects on a regional scale and the seismological

study of Mozambique (FCT project MOZART - in cooperation with Direcção Nacional de Geologia,

Maputo) will continue.

Based on the active faults identified under project RETURN and FINDER, more fieldworks and

trenching activities will be undertaken to determine more prehistoric events. Samples will be sent for

processing and age determination. With the newly established active trace, hazards assessment using

this length and location would be undertaken for Lisbon and cities situated in Lower Tagus valley.

As a consequence of an International Seminar on “Seismic Risk and Rehabilitation of Stone Masonry

Housing” that took place in Horta, Faial, in July of 2008, the Guest Editors C.S. Oliveira and A. Costa

prepared a “Special Issue” for the Journal “Bulletin of Earthquake Engineering – BEEE” on “Seismic

Behaviour of old Masonry Structures”. This Issue is ready and will be out as first volume of 2012.

Organization in collaboration with Prof. Emeritus Luis Mendes-Victor from the Faculty of Sciences,

University of Lisbon, of “The Second International Seminar on Prediction of Earthquakes”, which took

place in 29-30 April, 2009. This Seminar with the participation of more than 50 experts from all over

the world was made under the auspices of the Portuguese Academy of Engineering. As a

consequence of this Seminar a Special Issue for the Journal “Natural Hazards” has been prepared

during the period 2010-2011 and should be out in 2012.

An important achievement for 2012 is the 15th World Congress in Earthquake Engineering to be held

in Lisbon. The organizing and scientific committees of the conference are chaired and mainly

composed by members of the group 1.

II.3 Productivity – Theses and dissertations

A. Ph.D. theses

A.1 Concluded


__________________________________________________________________________________________

24

Student Name Thesis title University

and date

Course Supervisors (ICIST

only)

António José

Brazão de Brito

Dimensionamento de estruturas

Subterrâneas Sujeitas a Acções

Sísmicas

Design of reinforced concrete

underground structures under

seismic actions

IST/UTL Civil

Engineering

Supervisor: Mário

Santos Lopes

A.2 In progress


(starting

year)


only)

Beatriz Massena

Claudino

Reliability assessment of the

Direct Displacement Based Design

methodology (Avaliação da

fiabilidade do método directo de

dimensionamento com base nos

deslocamentos)

IST/UTL

(2008)

Civil

Engineering

Supervisor: Rita Bento

Carlos Bhatt Performance Based Seismic

Design and Assessment of

Reinforced Concrete Buildings

(Avaliação e Dimensionamento

Sísmicos baseados no

Desempenho de Edifícios de

Betão Armado)

IST/UTL

(2006)

Civil

Engineering


Francisco Vítor

Mota de Sá

Inclusão das dimensões social e

funcional, e ainda, dos

mecanismos de propagação de

efeitos na análise do Risco

Sísmico (Seismic risk analysis

considering social and functional

effects as well as

interdependencies)

IST/UTL

(2011)

Civil

Engineering

Supervisor: Carlos Sousa

Oliveira

Co-Supervisor: Mário

Santos Lopes

Helena Meireles Seismic Vulnerability of Pombalino

buildings (Vulnerabilidade sísmica

de edifícios Pombalinos)

IST/UTL

(2008)

Civil

Engineering



__________________________________________________________________________________________

25

Joana Alegria Entre a tradição e a inovação:

Estudo do edificado a Nascente do

Plano da Baixa de Lisboa depois

do terramoto (From tradition to

inovation: study of the building

pattern upstream from Baixa,

following the earthquake)

IST/UTL

(2011)

Architecture Co-Supervisor: António

Sousa Gago

João Guerreiro Técnicas de Reforço Sísmico de

Edifícios Antigos (Seismic

Strengthening Techniques for Old

Masonry Buildings)

IST/UTL

(2011)

Civil

Engineering

Supervisor: João Ferreira

Co-Supervisor: António

Sousa Gago

João Rei Estudo do Comportamento

Estrutural de Abóbadas

Tradicionais em Alvenaria e de

Soluções de Reforço (Traditional

masonry vaults –Structural

behaviour and strengthening

solutions)

IST/UTL

(2011)

Civil

Engineering

Supervisor: António

Sousa Gago

João Sarrazola

Martins

Estruturas de tecto e de cobertura

em Portugal, do Gótico ao século

XIX (Ceiling and Roof Structures in

Portugal – from Gothic to XIX

century)

IST/UTL

(2011)

Architecture Supervisor: António

Sousa Gago

Co-Supervisor: João

Caldas

Miguel Eduardo

Moura Branco

Reforço sísmico de estruturas de

alvenaria usando dispositivos com

ligas de memória de forma

(Seismic retrofitting of masonry

structures with shape memory

alloys devices)

IST/UTL

(2009)

Civil

Engineering

Supervisor: Luís

Guerreiro

Mónica Maria

Lopes de

Sequeira Amaral

Ferreira

Aplicação dos conceitos de risco

sísmico ao planeamento

municipal. Caso de estudo dos

equipamentos de ensino. “

(Application of seismic risk

concepts to town planning design.

Case study of educational

facilities).

IST/UTL

(2007)

Territory

Engineering

Supervisor: Carlos

Alberto de Sousa Oliveira

Co-supervisor: Jorge

Miguel Silveira Filipe

Mascarenhas Proença

B. M.Sc. dissertations


__________________________________________________________________________________________

26

B.1 Concluded


and date

Course Supervisors

(ICIST only)

André Filipe

Biscaya Semedo

Pereira da Graça

Modelação da Acção em Pontes devido

à Passagem de Comboios de Alta

Velocidade (Assessment of Bridge

Behaviour Due to the Passage of High

Speed Trains)

IST/UTL

(Sep. 2011)

Civil

Engineering

Supervisors: Luís

Guerreiro /

Francisco Virtuoso

André Filipe

Santos de

Bragança Almeida

Seismic Retrofit of Reinforced Concrete

Building Structures with Buckling

Restrained Braces (Reforço sísmico de

estruturas de edifícios de betão

armado com dissipadores de aço com

encurvadura restringida)

IST/UTL

(Jul. 2011)

Civil

Engineering

Supervisors: Jorge

Miguel Proença /

António Sousa

Gago

Fernando Miguel

Aguiar Simões

Isolamento Sísmico com Apoios

Elastoméricos com Núcleo de Chumbo

(Seismic Isolation with Lead-Rubber

Bearings)

IST/UTL

(Oct. 2011)

Civil

Engineering

Supervisor: Luís

Guerreiro

Gonçalo Carvalho Análise Sísmica de Edifícios de Betão

Armado. Estudo de Alternativas de

Modelação e Análise Não-Linear

(Seismic Analysis of Reinforced

Concrete Buildings Study of

Alternatives for Nonlinear Modelling and

Analysis)

IST/UTL

(Jun. 2011)

Civil

Engineering

Supervisor: Rita

Bento

João Luís de

Freitas e Silva

Avaliação e reforço sísmico de edifícios

escolares. Análise de um caso de

estudo com estrutura em alvenaria.

(Seismic assessment and strengthening

of school buildings. Analysis of a

loadbearing masonry wall school

building)

IST/UTL

(Dec./

2011)

Civil

Engineering

Supervisors:

António Sousa

Gago / Jorge Miguel

Proença

João Nuno

Camacho Gorjão

Análise estrutural de cúpulas

aligeiradas do barão de Eschwege

(Structural study of the Eschwege

domes in Sintra)

IST/UTL

(Nov. 2011)

Supervisors:

António Lamas /

António Sousa

Gago


__________________________________________________________________________________________

27

Mauro Filipe

Santos Monteiro

Dissipação de Energia em Edifícios

(Energy dissipation in buildings)

IST/UTL

(Oct. 2011)

Civil

Engineering

Supervisors: Luís

Guerreiro

Miguel Antunes da

Cunha Espinha

dos Santos

Hysteretic Behaviour of Dissipative

Welded Devices for Earthquake

Resistant Steel Frames

(Comportamento histerético de

dispositivos dissipativos

soldados para resistência sísmica de

estruturas porticadas de aço)

IST/UTL

(Apr./ 2011)

Civil

Engineering

Supervisors: Luís

Calado / Jorge

Miguel Proença

Miguel Pinto dos

Santos Matias

Avaliação e redução de vibrações

mecânicas em pontes pedonais: O

caso de estudo da Passerella Olimpica,

em Turim. (Assessment and reduction

of vibrations in pedestrian bridges. The

case study of the Passerella Olimpica,

in Turim)

IST/UTL

(Mar./

2011)

Civil

Engineering

Supervisors: Jorge

Miguel Proença

Nuno Filipe Barata

Feliciano

Dimensionamento Sísmico de Edifícios

Industriais Pré-fabricados em Betão

Armado (Seismic design of reinforced

concrete precast industrial buildings).

IST/UTL

(Oct./ 2011)

Civil

Engineering

Supervisors: Jorge

Miguel Proença

Rafael Nicolau

Gomes

Sistema Estrutural de Edifícios Antigos

de Lisboa - Os Edifícios Pombalinos e

os Edifícios Gaioleiros (Structural

systems of the old Lisbon masonry

buildings)

IST/UTL

(Set 2011)

Civil

Engineering

Supervisors:

António Sousa

Gago

B.2 In progress

Student Name Thesis title University Course Supervisors

(ICIST only)

Ana Caré Viegas

Costa

Reforço sísmico de paredes portantes

de alvenaria. Caracterização

experimental e modelos de cálculo

(Seismic strengthening of loadbearing

masonry walls. Experimental

characterization and calculation models)

IST/UTL Civil

Engineering

Supervisors: Jorge

Miguel Proença /

António Sousa

Gago

Ana Rute Simões

Coelho

Refinamento de metodologia de

avaliação do risco sísmico de unidades

de saúde - metodologia ICIST/ACSS

IST/UTL Civil

Engineering

Supervisor: Jorge

Miguel Proença


__________________________________________________________________________________________

28

(Refinement of ICIST/ACSS seismic

vulnerability assessment procedure for

healthcare facilities)

Beatriz Monteiro Avaliação da vulnerabilidade sísmica de

edifícios de placa (Assessment of the

Seismic Vulnerability of ‘Placa’

buildings)

IST/UTL Civil

Engineering

Supervisor: António

Sousa Gago / Rita

Bento

Filipa Nunes

Vicente de Sousa

Chaves

Avaliação da vulnerabilidade sísmica de

edifícios de paredes portantes de

alvenaria (Seismic vulnerability

assessment of loadbearing masonry

wall structures)

IST/UTL Civil

Engineering

Supervisors: Jorge

Miguel Proença /

António Sousa

Gago

Joana Delgado Avaliação sísmica de um edifício crítico

em alvenaria (Seismic Assessment of a

Critical masonry building)

IST/UTL Civil

Engineering

Supervisor: Rita

Bento / Mário Lopes

João Monteiro Modelação Computacional de Edifícios

Gaioleiros (Computational modeling of

Gaioleiros buildings)

IST/ UTL Civil

Engineering

Supervisors:

António Sousa

Gago

Maria Ruano Métodos construtivos e funcionamento

estrutural das igrejas medievais

(Construtive methods and structural

behaviour of medieval churches)

IST/ UTL Civil

Engineering

Supervisors:

António Sousa

Gago

Pedro Gomes Modelação de estruturas de alvenaria

através de modelos 3D de elementos

discretos (3D modeling of masonry

buildings with discrete elements

method)

IST/ UTL Civil

Engineering

Supervisors:

António Sousa

Gago / José Vieira

de Lemos (LNEC)

Susana Filomena

Caldeira Gomes

Caracterização experimental de

dispositivos de reforço sismico de

edifícios de alvenaria (Experimental

characterization of seismic

strengthening devices for masonry

loadbearing structures)

IST/UTL Civil

Engineering

Supervisor: Jorge

Miguel Proença

II.4 Productivity – Publications in peer-reviewed journals

A.1 Papers in international peer-reviewed journals (ISI/Scopus)


__________________________________________________________________________________________

29

1. Besana-Ostman, G.M.; Ando, M; Daligdig, J.A.; Abigania, M.I.T.; Talisic, J.E.; Evangelista, N.; Solidum, R.U.

(2011): “The Tsunami of the 1990 Bohol Earthquake: Tsunami Observations and Effects at Bohol island”,

Science of Tsunami Hazards, V. 30, n.º 2, Tsunami Society, USA, pp. 78-93. (IF=0.000, NC=0)

2. Bhatt, C.; Bento, R. (2011): “Assessing the Torsional Response of Existing RC Building using the Extended

N2 Method”, Bulletin of Earthquake Engineering, V. 9, n.º 4, A. Ansal editor, Springer The Netherlands

Publisher, August 2011, pp. 1183-1201. (IF = 1.701; NC=0).

3. Bhatt, C.; Bento, R. (2011): “Extension of the CSM-FEMA440 to Plan-Asymmetric Real Building Structures”,

Journal of Earthquake Engineering and Structural Dynamics, V. 40, n.º 11, John Wiley & Sons, September

2011, pp. 1263-1282. (IF = 1.403, NC=0).

4. Branco, M.; Guerreiro, L. (2011): "Seismic rehabilitation of historical masonry buildings", Engineering

Structures, V. 33, n.º 5, Elsevier, UK, May 2011, pp. 1626-1634. (IF=1.363, NC=0).

5. Branco, M.; Kelly, J.; Guerreiro, L. (2011): "An algorithm to simulate the one-dimensional superelastic cyclic

behavior of NiTi strings, for civil engineering applications", Engineering Structures, V. 33, n.º 12, Elsevier, UK,

December 2011, pp. 3737-3747. (IF=1.363, NC=0).

6. Costa, A.A.; Arede, A.; Costa, A.; Oliveira, C.S. (2011): “In situ cyclic tests on existing stone masonry walls

and strengthening solutions”, Earthquake Engineering & Structural Dynamics, V. 40, n.º 4, April 2011, pp.

449-471. (IF=1.403, NC=0).

7. Fonseca, J.F.B.D.; Vilanova, S.P. (2011): "Comment on Sousa, M. L. and Costa, A. C., “Ground motion

scenarios consistent with probabilistic seismic hazard disaggregation analysis. Application to Mainland

Portugal”", Bulletin of Earthquake Engineering, V. 9, n.º 4, Aug. 2011, pp. 1289-1295 (IF=1.701, NC=0).

8. Gago, A.; Alfaiate, J.; Lamas, A. (2011): "The Effect of the Infill in Arched Structures: Analytical and

Numerical Modelling", Engineering Structures, V. 33, pp. 1450-1458 (IF=1.363, NC=0).

9. Gago, A.; Proença, J.; Cardoso, J.; Cóias, V.; Paula, R. (2011): "Seismic strengthening of stone masonry

walls with glass fiber reinforced polymer strips and mechanical anchorages", Experimental Techniques, SEM,

V. 35, n.º 1, pp. 45–53, January/February 2011 (IF=0.500, NC=0).

10. Gomes, I.; Lopes, M.; Brito, J. de: "Seismic Resistance of Earth Construction in Portugal", Engineering

Structures, V. 33, n.º 3, Elsevier, UK, March 2011, pp. 932-941 (IF=1.363; NC=1).

11. Heleno, S.; Oliveira, L.; Henriques, M.; Falcão, A.; Lima, J.; Cooksley, G.; Ferretti, A.; Fonseca, A.; Lobo-

Ferreira, J.; Fonseca, J.F.B.D. (2011): "Persistent Scatterers Interferometry detects and measures ground

subsidence in Lisbon", Remote Sensing of Environment, V. 115, n.º 8, pp. 2152-2167 (IF=3.954, NC=0).

12. Igel, H.; Nader, M.-F.; Kurrle, D.; Ferreira, A.M.; Wassermann, J.; Schreiber, K.U. (2011): "Observations of

Earth's Toroidal Free Oscillations with a Rotation Sensor: The 2011 Magnitude 9.0 Tohoku-Oki Earthquake",

Geophysical Research Letters, V. 38, L21303, 2011, doi:10.1029/2011GL049045 (IF=3.505, NC=0).

13. Vallée, M.; Charléty, J.; Ferreira, A.M.G.; Delouis, B.; Vergoz, J. (2011): "SCARDEC: a new technique for the

rapid determination of seismic moment magnitude, focal mechanism and source time functions for large

earthquakes using body-wave deconvolution". Geophysical Journal International, V. 184, n.º 1, 2011, pp. 338-

358 (IF=2.411; NC=0).

http://dx.doi.org/10.1029/2011GL049045


__________________________________________________________________________________________

30

14. Weston, J.; Ferreira, A.M.G.; Funning, G.J. (2011): "Global compilation of interferometric synthetic aperture

radar earthquake source models: 1. Comparisons with seismic catalogs": Journal of Geophysical Research,

V. 116, B08408, 2011, doi: 10.1029/2010JB008131 (IF=3.303; NC=1).

15. Ferreira, A.M.G.; Weston, J.; Funning, G.J. (2011): “Global compilation of interferometric synthetic aperture

radar earthquake source models: 2. Effects of 3-D Earth structure”, Journal of Geophysiscal Research, V.

116, B08409, 2011, doi: 10.1029/2010JB008132 (IF=3.303; NC=1).

16. Santos, J.A.; Chitas, P.; Lopes, I.; Sousa Oliveira, C.; Almeida, I.M.; Nunes, J.C.: "Assessment of site-effects

using acceleration time series. Application to São Sebastião volcanic crater", Soil Dynamics & Earthquake

Engineering, V. 31, n.º 4, April 2011, pp. 662-673. (IF=1.010; NC=0)

A.2 Papers in national peer-reviewed journals

II.5 Productivity – Publications in other journals

A.1 Papers in other journals – International

A.2 Papers in other journals – National

1. Casanova, S.; Bento, R.; Lopes, M. (2011): “Comparação de Regulamentação sobre Avaliação e Reforço

Sísmico de Edifícios Antigos de Alvenaria”, Revista Internacional Construlink (RIC), 2011, 9, nº 26, pp. 48-63.

2. Gago, A.; Proença, J. (2011): “Estudo duma solução de reboco armado para reforço sísmico de paredes de

alvenaria”, Revista Internacional Construlink, V. 9, n.º 26, 2011.

3. Gago, A. (2011): Editorial da Revista Internacional Construlink; N.º 26 V. 9.

4. Gonçalves, A.; Ferreira, J.; Guerreiro, L.; Branco, F.: “Avaliação Experimental do Comportamento de Paredes

de Edifícios Pombalinos ", RIC – Revista Internacional Construlink, V. 9, n.º 27, Junho de 2011, pp. 52-65.

II.6 Productivity – Papers in proceedings

A.1 Papers in proceedings – International

1. Besana-Ostman, G.M.; Vilanova, S.P.; Nemser, E; Ferreira, H.; Narciso J.; Falcão, A.P.; Pinheiro, P.,

Fonseca, J. (2011): "The Lower Tagus Valley Fault Zone: Results of recent mapping", XVIII INQUA

Congress, Bern, Switzerland, 21-27 July 2011.

2. Besana-Ostman, G.M; Vilanova, S.P., Falcão, A.P.; Nemser, E.; Ferreira, H.; Heleno, S.; Fonseca, J. (2011):

"Overview, New Insights and Future Challenges on the Lower Tagus Valley Fault Zone", European

Geosciences Union General Assembly 2011, Vienna, Austria, April 2011. Geophysical Research Abstracts,

Vol. 13, p. 13567.

3. Bhatt, C.; Bento, R. (2011): “Nonlinear Static Procedures on the Seismic Assessment of Existing Plan

Asymmetric Buildings”, Proceedings of the 2011 World Congress on Advances in Structural Engineering and

Mechanics (ASEM11plus), The 2011 International Conference on Earthquakes and Structures (ICEAS’11),

Seoul, South Korea, September 2011.

http://dx.doi.org/10.1029/2010JB008131

http://dx.doi.org/10.1029/2010JB008132


__________________________________________________________________________________________

31

4. Bhatt, C.; Bento, R. (2011): “Estimating Torsional Demands in plan irregular buildings using Pushover

Procedures coupled with linear dynamic response spectrum analysis”, 6EWICS, Sixth European Workshop

on the seismic behaviour of Irregular and Complex Structures, Haifa, Israel, September 2011.

5. Carvalho, G.; Bento R.; Bhatt, C. (2011): "Nonlinear Models for the Seismic Analysis of Reinforced Concrete

Buildings – A Performance Evaluation of Different Models in Nonlinear Static and Dynamic Analysis",

International Conference on Recent Advances in Nonlinear Models – Structural Concrete Applications

(CoRAN 2011), Coimbra, Portugal, October 2011.

6. Ferreira, J.; Gonçalves, Ana; Guerreiro, L.; Branco, F. (2011): “Evaluation of the behavior of ‘pombaline’

buildings’ walls (Avaliação do comportamento de paredes em edifícios pombalinos)”, 6º Congresso Luso-

Moçambicano de Engenharia, Maputo, August-September 2011.

7. Ferreira, A.M.G.; Vallée, M.; Lentas, K.; Weston, J. (2011): "Systematic seismological analysis of large

subduction earthquakes: comparisons with geodetic results and the effects of 3D Earth structure", Book of

abstracts of the meeting ‘New Advances in Geophysics, London, 10-11 February, 2011. (Oral presentation)

8. Ferreira, A.M.G.; Weston, J.; Funning, G.J. (2011): "Global CMT source inversions using 3D Earth models:

comparisons with InSAR", Abstract EGU2011-4949 presented at the Annual meeting of the European Union

of Geosciences (EGU), 3-8 April 2011, Vienna, Austria. (Oral presentation)

9. Ferreira, A.M.G. (2011): "Kinematic earthquake source models: uncertainties and prospects", ESF meeting

Continuing Challenges in Earthquake Dynamics: New Methods for Observing and Modelling a Multi-Scale

System, Obergurgl, Austria, 24-29 September 2011. (Invited Keynote talk)

10. Ferreira, A.M.G.; Weston, J.; Funning, G.J. (2011): "Global database of InSAR earthquake source models: A

tool for independently assessing seismic catalogues", Abstract S21A-2150 presented at 2011 Fall Meeting,

AGU, San Francisco, Calif., 4-9 Dec. 2011. (Poster presentation).

11. Funning, G.; Weston, J.; Elliott, J.; Ferreira, A.M.G.; Richards-Dinger, K. (2011): "Earthquake scaling

relationships estimated from a 16 year catalog of published InSAR studies", 2011 Annual Meeting of the

Southern California Earthquake Center, Palm Springs, Calif., USA, 11-14 September 2011. (Oral

presentation)

12. Igel, H.; Nader-Nieto, M.; Wassermann, J.; Ferreira, A.M.G.; Kurrle, D.; Schreiber, U. (2011): "Observations of

toroidal free oscillations with a ring laser: the M9 Tohoku-Oki event", Fragile Earth meeting: Geological

Processes from Global to Local Scales and Associated Hazards, Munich, Germany, 4-7 September 2011

(oral presentation)

13. Lentas, K.; Ferreira, A.M.G.; Vallée, M. (2011): "Testing earthquake source models using broad-band seismic

data", 2nd QUEST workshop in Hveragerdi, Iceland, July 12-19, 2011. (Poster)

14. Lentas, K.; Ferreira, A.M.G.; Vallée, M.; Clevede, E. (2011): “Testing earthquake source models using

forward modelling of long-period seismic data”, Abstract S43C-2275 presented at 2011 Fall Meeting, AGU,

San Francisco, Calif., 4-9 Dec. 2011. (Poster presentation).

15. Meireles, H.; Bento, R.; Cattari, S.; Lagomarsino, S. (2011): "The proposal of a hysteretic model for internal

wooden walls in Pombalino buildings", Proceedings of the 2011 World Congress on Advances in Structural

Engineering and Mechanics (ASEM11plus), The 2011 International Conference on Earthquakes and

Structures (ICEAS’11), Seoul, South Korea, September 2011.

http://meetingorganizer.copernicus.org/EGU2011/EGU2011-4949.pdf


__________________________________________________________________________________________

32

16. Mendes, M.; Mari, J.L. (2011): "Description of Near Surface Geological Structures Combining Refracted and

Reflected Seismic Data". 73rd EAGE Conference & Exhibition incorporating SPE EUROPEC, Vienna, Austria,

23 - 26 May, 2011.

17. Nader, M.; Igel, H.; Kurrle, D.; Ferreira, A.M.G.; Wassermann, J.; Schreiber, U. (2011): "Observations of

Earth's Free Oscillation with Long-Period Rotational Ground Motion Records", Abstract EGU2011-8552

presented at the Annual meeting of the European Union of Geosciences (EGU), 3-8 April 2011, Vienna,

Austria. (Oral presentation)

18. Nader, M.; Igel, H.; Kurrle, D.; Ferreira, A.M.G.; Wassermann, J.; Schreiber, U. (2011): "Observations of

earth's free oscillations with rotational ground motion records", 2nd QUEST workshop in Hveragerdi, Iceland,

July 12-19, 2011. (Poster presentation)

19. Proença, J.M.; Casal, H.; Neves, M. (2011): "Effect of the type of track on the dynamic behaviour of high

speed railway bridges", Proceedings of the 3rd International Conference on Computational Methods in

Structural Dynamics and Earthquake Engineering, COMPDYN 2011, Corfu, Greece, May 2011, 18 pp.

20. Valois, R.; Galibert, P.Y.; Guérin, R.; Plagnes, V.; Mendes, M. (2011): "Apport de la géophysique 3D et du

suivi temporel pour la caractérisation de l'épikarst et de son stockage". H2Karst, 9th Conference on

Limestone Hydrogeology, Besançon, France, 1-3 September, 2011.

21. Valois, R.; Galibert, P.Y.; Guérin, R.; Plagnes, V.; Mendes, M. (2011): "Infiltration et stockage dans l'épikarst

dolomitique du Causse du Larzac: suivi temporel par les méthodes électriques et sismiques". GFHN -

GEOFCAN, Orléans, 4 p., 29 november-1st December, 2011.

22. Valois, R.; Galibert, P.Y.; Guérin, R.; Plagnes, V.; Mendes, M. (2011): "Epikarstic storage and doline

structural characterization with time-lapse geophysics (seismic refraction & electrical resistivity)". AGU Fall

Meeting, San Francisco, CA, USA, 5-9 December, 2011.

23. Weston, J.; Ferreira, A.M.G.; Funning, G.J. (2011): "How well can InSAR derived earthquake source

parameters explain observed seismic data?", 2nd QUEST workshop in Hveragerdi, Iceland, July 12-19, 2011

(Poster).

24. Weston, J.; Ferreira, A.M.G. (2011): "How well can InSAR derived earthquake source parameters explain

observed seismic data?", ESF meeting Continuing Challenges in Earthquake Dynamics: New Methods for

Observing and Modelling a Multi-Scale System, Obergurgl, Austria, 24-29 September 2011. (Poster

presentation)

25. Weston, J.; Ferreira, A.M.G. (2011): "How well can InSAR derived earthquake source parameters explain

observed seismic data?", Fringe Workshop 2011, Frascati (Italy) 19-23 September 2011. (Poster

presentation)

26. Weston, J.; Ferreira, A.M.G.; Funning, G.J. (2011): "Testing InSAR and seismically-determined source

models using 3D seismic forward modelling: towards joint inversions using 3D Earth models", Abstract S12B-

06 presented at 2011 Fall Meeting, AGU, San Francisco, Calif., 4-9 Dec. 2011. (Oral presentation).

A.2 Papers in proceedings – National

1. Casal, H.; Neves, M.; Proença, J. (2011): “Efeito do tipo de via sobre o comportamento dinâmico de pontes

ferroviárias de alta velocidade “, Proceedings of the ASCP 2011, P.J.S. Cruz, C. Rebelo, T. Mendonça eds,

Coimbra, June-July 2011, 11 pp.

http://meetingorganizer.copernicus.org/EGU2011/EGU2011-8552-1.pdf


__________________________________________________________________________________________

33

II.7 Productivity – Books

A.1 Entire books

1. Proença, J.; Gago, A. (2011): "Parque Escolar. Seismic strengthening of school buildings", Parque Escolar,

Lisbon, 2011 (189 pages)

A.2 Chapters

1. Azevedo, J.; Guerreiro, L.; Bento, R.; Lopes, M.; Monteiro, A.; Proença, J.; Ferreira, M.: “Vulnerabilidade

Sísmica de Redes de Infra-estruturas”, Chapter 10, “Estudo do Risco Sísmico e de Tsunamis do Algarve”,

ERSTA, Autoridade Nacional de Protecção Civil (ANPC), 2011.

2. Ferreira, M.A.; Oliveira, C.S.; Sá, F.M (2011): "Estimating Human Losses in Earthquake Models: a

Discussion". In Human Casualties in Earthquakes, Advances in Natural and Technological Hazard Research,

Vol 29, R. Spence et al. (editors), Chap. 17, pp 255-266, Springer.

3. Roca, A.; Guéguen, P.; Godey, S.; Goula, X.; Susagna, T.; Péquegnat, C.; Oliveira, C.S.; Clinton, J.;

Pappaioanou, C.; Zülfikar, C. (2011): "The European-Mediterranean Distributed Accelerometric Data-Base".

In D.S. Akkar et al. (eds.), Earthquake Data in Engineering Seismology, Geotechnical, Geological, and

Earthquake Engineering 14, DOI 10.1007/978-94-007-0152-6_9, Springer Science+Business Media B.V.,

Chapter 9.

A.3 As editor

II.8 Productivity – Reports

1. Bento R.: “Avaliação e Dimensionamento Sísmico por Critérios de Desempenho - Sumário de uma lição de

síntese do Curso Avançado em Dinâmicas de Estruturas DEAEC", Relatório ICIST DTC nº 15/11, ICIST-IST,

Lisboa, 2011.

II.9 Consultancy projects and industry contract research projects

1. Proença, J.; Gago, A.: “Identificação Modal da Estrutura do Edifício Principal do Liceu Camões, em Lisboa”,

Relatório ICIST 01/11

2. Proença, J.; Lopes, M.: “Estudo de Vulnerabilidade Sísmica das Células dos Reservatórios de Água R1 E R2

de Vila Franca de Xira”, Relatório ICIST 02/11

3. Proença, J.; Lopes, M.: “Estudo de Vulnerabilidade Sísmica do Reservatório de Água de Telheiras”, Relatório

ICIST 03/11

II.10 Collective guidance scientific work

A.1 Membership in Editorial Boards of Journals – International

Researcher Journal – International


__________________________________________________________________________________________

34

Carlos Sousa Oliveira Bulletin of Earthquake Engineering

Carlos Sousa Oliveira Earthquake Engineering and Structural Dynamics

Rita Bento Earthquake and Structures (EAS)

Rita Bento An International Journal of Earthquake Engineering

Rita Bento Structural Dynamics

Rita Bento Earthquake hazard Mitigation

Rita Bento Earthquake Effects on Structures

Rita Bento Structural Safety under Earthquakes

A.2 Membership in Editorial Boards of Journals – National

B.1 Membership in Scientific Committees – International

Researcher Scientific Committees – International

Organisation/Event Type of participation

Carlos Sousa Oliveira European Association for Earthquake Engineering

Member of the Executive Committee

Carlos Sousa Oliveira International Association for Earthquake Engineering

Vice-President

João Azevedo 15th World Conference on Earthquake

Engineering President of the Scientific Committee

Mário Lopes 15th World Conference on Earthquake

Engineering Member of the Local Advisory Committee

Rita Bento 15th World Conference on Earthquake

Engineering Member of the Scientific Committee

Rita Bento European Workshop of Irregular and Complex Structures, 6EWICS

Member of the Scientific Committee

Rita Bento ECCOMAS, International Conference on Recent Advances in Nonlinear Models - Structural Concrete Applications


Rita Bento ICEAS’11, The 2011 International Conference on Earthquakes and Structures


B.2 Membership in Scientific Committees – National

C.1 Drafting of Recommendations and Codes – International

C.2 Drafting of Recommendations and Codes – National

Researcher Drafting of Recommendations and Codes – National

Working Group Designation


__________________________________________________________________________________________

35

Luís Guerreiro CT115 – Eurocode 8

II.11 Organisation of scientific events - Membership in Organising Committees

A.1 International events

Researcher Organisation of scientific events – International

Event Notes

Ana Ferreira 2nd QUEST workshop, July/2011 Iceland

Co-organizer and work package leader

Ana Ferreira QUEST mid-term review meeting, Sept/2011, Paris, France

Co-organizer and work package leader

Carlos Sousa Oliveira 15

th World Conference on Earthquake

Engineering President of the Organising Committee

João Azevedo 15


Engineering Member of the Organising Committee

Jorge Proença 15


Engineering Member of the Organising Committee

Luís Guerreiro 15


Engineering Member of the Organising Committee - Secretary-General

João Fonseca ORFEUS Observatory Coordination Workshop, Lisbon, May 2011

Chairman of the Organizing Commission

A.2 National events

II.12 Participation in Symposia and Conferences

A.1 International Events

Researcher Event City and Country

Date

Ana Ferreira 2nd QUEST workshop Iceland July 2011

Ana Ferreira Annual meeting of the European Geosciences Union (EGU)

Vienna, Austria

April 2011

Ana Ferreira Fall Meeting of the American Geophysical Union (AGU)

San Francisco, USA

Dec. 2011

Ana Ferreira New Advances in Geophysics meeting London, UK Feb. 2011

Ana Ferreira ESF meeting Continuing Challenges in Earthquake Dynamics

Obergurgl, Austria

Sept. 2011

Ana Ferreira 2011 Annual Meeting of the Southern California Earthquake Center (SCEC)

Palms Spring, USA

Sept 2011

Ana Ferreira Fragile Earth Munich, Sept. 2011


__________________________________________________________________________________________

36

Germany

Ana Ferreira Fringe Workshop 2011 Frascatti, Italy Sept. 2011

Glenda Besana-Ostman European Geophysical Union 2011 Meeting

Viena, Austria April 2011

Glenda Besana-Ostman INQUA Congress 2011 Switzerland July 2011

Jorge M. Proença COMPDYN 2011 Corfu - Greece May 2011

Rita Bento 6EWICS, Sixth European Workshop on the seismic behaviour of Irregular and Complex Structures

Haifa, Israel September 2011

Rita Bento 2011 World Congress on Advances in Structural Engineering and Mechanics (ASEM+)

Seoul, South Corea

September 2011

Rita Bento International Conference on Recent Advances in Nonlinear Models – Structural Concrete Applications, CoRAN 2011

Coimbra, Portugal

October 2011

A.2 National Events

Researcher Event City Date

Jorge M. Proença ASCP 2011 Coimbra June-July

II.13 Participation in International events abroad


Date

Ana Ferreira QUEST mid-term review meeting Paris, France Sept. 2011

Ana Ferreira PURE II meeting Paris, France Oct. 2011

Ana Ferreira ICRIES meeting London, UK March 2011

Ana Ferreira ICRIES meeting London, UK Sept. 2011

Manuela Mendes 73

rd EAGE Conference & Exhibition

incorporating SPE EUROPEC Vienna, Austria

23 - 26 May, 2011

II.14 Research grants for projects, sabbaticals, post-doc

A.1 International research grants – Submitted

A.2 International research grants – Awarded

IST is leading the Portuguese group participating in the UPStrat-MAFA Project which will start in January 2012

and will last for 2 years. UPStrat-MAFA is a FP7 Project dealing with “Urban Disaster Prevention Strategies

Using Macroseismic Fields and Fault Sources”. Prof. Carlos Sousa Oliveira is the Portuguese Coordinator and

the participation in the Project involves several WP´s.


__________________________________________________________________________________________

37

A.3 International research grants – In Progress

Fonseca, J.: Project MIAVITA (Mitigate and Assess Risk from Volcanic Impact on Human Activities and Terrain)

FP7-2008-211393

Fonseca, J.: Project SHARE (Seismic Hazard Harmonization for Europe), FP7-2009-226967

J. Fonseca: Project EPOS-PP (European Plate Observing System – Preparatory Phase), FP7-2010-262229

IST is leading the portuguese group participating in the REAKT Project, which started in September 2011 and will

last for 3 years. REAKT is a FP7 Project dealing with “Strategies and tools for Real time EArthquake risK

reduction”. Prof. Carlos Sousa Oliveira is the Portuguese Coordinator and the participation in the Project involves

WP5 dealing with vulnerabilities of critical structures and with WP7 dealing with the Risk Analysis of the Sines

Industrial Complex. The influence of Early Warning Systems in mitigating the risk of a few industrial facilities in

Sines is an important part of the Project.

B.1 National research grants – Submitted

Besana-Ostman, G.M: Project GeoSLICER under the FCT PTDC/CTE-GIX/119218/2010 (Geomorphological

Studies and Paleoliquefaction Investigations on Tagus Estuary for Earthquake Hazards Assessments)

Ferreira, A.M.G.: AQUAREL, FCT PTDC/CTE-GIX/116819/2010 (Accurate QUAntification of Regional

Earthquakes and Earth structure: appLication to Western Iberia)

B.2 National research grants – Awarded

Ferreira, A.M.G.: AQUAREL, FCT PTDC/CTE-GIX/116819/2010 (Accurate QUAntification of Regional

Earthquakes and Earth structure: appLication to Western Iberia).

B.3 National research grants – In Progress

Besana-Ostman, G.M: Project FINDER, FCT PTDC/CTE-GIX/113866/2009 (Fault Investigation with LiDAR for

Earthquake Reassessment)

Fonseca, J.F.B.D: Project MOZART, FCT PTDC/CTE-GIX/103249/2008 (Mozambique African Rift Tomography)

PRECASEISMIC - Comportamento de Estruturas Pré-fabricadas sob a Acção Sísmica - Desenvolvimento de

Ligações de Elevado Desempenho (Seismic behaviour of precast reinforced concrete structures – development

of high performance connections). FCT Project PTDC/ECM/116161/2009 (Total funding 168.660,00 €, IST

funding 46.404 €). Jan 2011- Dec 2013.

Project FCT PTDC/ECM/100299/2008; “Nonlinear Static Methods for Assessment/Design of 3D Irregular

Structures”, IST/ICIST; 2009-2012, PI Rita Bento, awarded in 2009, but only executed in 2010-2013.

Project FCT PTDC/ECM/100872/2008; “Seismic Vulnerability Analysis of Old Masonry Buildings”, IST/ICIST;

2009-2012, Principal Investigator: Rita Bento, awarded in 2009, but only executed in 2010-2013


__________________________________________________________________________________________

38

Vilanova, S.P.: Project SCENE, FCT PTDC-CTE/GIX 103032/2008 (Site Condition Estimation for National

Seismic Hazard Estimation)

II.15 Scientific cooperation

A.1 International cooperation (institutes, developing countries and territories, etc.)

Researcher Description Institution /

Organization Date

Ana Ferreira New methodologies for the study of large subduction earthquakes

GeoAzur, University of Nice, France (Martin Vallée)

2011 (whole year)

Ana Ferreira Testing earthquake source models obtained using InSAR data

University of California Riverside, USA (Gareth Funning)

2011 (whole year)

Ana Ferreira Analysis and modelling of long-period rotational data

LMU Munich, Germany (Heiner Igel)

2011 (whole year)

Ana Ferreira Analysis and modelling of surface wave higher-mode data and body-wave travel times

University of Michigan, USA (Jeroen Ritsema)

University of Oxford, UK (John Woodhouse)

2011 (whole year)

Ana Ferreira Modelling of normal mode data Institut de Physique du Globe de Paris, France (Eric Clevede, Jean-Paul Montagner)

2011 (whole year)

Ana Ferreira EU FP7 ITN Project QUEST – QUantitative estimation of Earth’s sources and STructure

QUEST partners (15 different institutions)

2011 (whole year)

Manuela Mendes Participação em tratamento de dados de prospecção sísmica.

Collaboration on seismic data processing

UMR Sisyphe, Université Pierre et Marie Curie

Several months

Manuela Mendes Participação no desenvolvimento de técnicas de tratamento e interpretação de dados de prospecção sísmica

Collaboration on the development of seismic data processing and interpretation

IFPEN 2011

A.2 National cooperation with other institutes, organisations, etc.


__________________________________________________________________________________________

39

A.3 Internal cooperation between the Groups

Researcher Description Date

Luís Guerreiro, Jorge Proença, António Gago

Study on the behaviour and strengthening of old buildings’ walls. RehabToolbox. Collaboration with João Ferreira, Fernando Branco of Group 3

2011

Luís Guerreiro, Jorge Proença, António Gago

Research Project REABEPA funded by FCT, with João Ferreira, Fernando Branco of Group 3

2011

J. Fonseca Research in the scope of MIAVITA project with Alexandre Gonçalves and Ana Pala Falcão of Group 5

2011

II.16 Academic exchanges

A.1 Internacional

A.2 National

II.17 Other scientific activities

A.1 Awards (national and international)

A.2 Refereeing for international journals

Researcher Description

Ana Ferreira 4 papers for Geophysical Journal International

Ana Ferreira 1 paper for Geophysical Research Letters

Ana Ferreira 3 papers for Bulletin of the Seismological Society of America

Ana Ferreira 1 paper for Journal of Seismology

Ana Ferreira 2 papers for Scientific reports (Nature publishing group)

Ana Ferreira 2 papers for Studia Geophysica et Geodaetica

António Sousa Gago 1 paper for International Journal of Architectural Heritage

Rita Bento 3 papers for Journal of Earthquake and Structures

Rita Bento 1 papers for Journal of Engineering Structures

Rita Bento 3 papers for Journal of Earthquake Engineering

Rita Bento 1 paper for Advances in Structural Engineering

Rita Bento 1 paper for International Journal of Architectural Heritage

A.3 Refereeing for national journals

A.4 Refereeing for funding agencies (national and international)


__________________________________________________________________________________________

40

Researcher Description Institution

Manuela Mendes

Evaluation of the call FP7-ENV-2012 topic 6.4-2, "Long-term monitoring experiment in geologically active regions of Europe prone to natural hazards: the Supersite concept"

European Union

Manuela Mendes Futuro in Ricerca 2010

Servizio Consulenza Futuro in Ricerca, Italy

A.5 Lectures by invitation in international conferences (plenary, keynote)

Researcher Description Place/Date

Ana Ferreira Invited keynote talk - ESF meeting Continuing Challenges in Earthquake Dynamics: New Methods for Observing and Modelling a Multi-Scale System

Obergurgl, Austria, 24-29 Sept. 2011

A.6 Lectures and/or organization of scientific or technical workshops, seminars, courses and

similar (national and international)

Researcher Description Institution Place/Date

Carlos Sousa Oliveira (coord.)

Luís Guerreiro

Rita Bento

Jorge Proença

Mário Lopes

António Gago

Reabilitação de estruturas tendo em conta a acção sísmica. Estruturas em alvenaria. Reforço e análise estrutural

(Retrofitting of structures considering the seismic action. Masonry structures. Strengthening and structural analysis)

FUNDEC IST, May 2011

Carlos Sousa Oliveira Palestra "A Urbanização dos Desastres" Bombeiros Voluntários de Esmoriz

Esmoriz, Portugal, 4 April 2011

Carlos Sousa Oliveira The differences and similarities on looking at the several impacts of various recent earthquakes: levels and consequences

Instituto Nazionale di Geofisica e Vulcanologia, Sezione di Milano-Pavia

Milano, Italy, 23 March 2011

Carlos Sousa Oliveira Palestra “Experiencias obtenidas en sismos recientes en Italia, Haiti, Chile, Nueva Zelanda, Japón y España”

- 1ºCongreso Mexicano de Ingenieria Sísmica

Ensenada, Mexico, Sept. 2011

Jorge Proença Eurocode 8 FUNDEC IST, May 2011

Ana Ferreira Invited departmental talk University of Leeds, UK

Leeds, March 2011


__________________________________________________________________________________________

41

II.18 Models

II.19 Software applications

II.20 Pilot plants

II.21 Prototypes

II.22 Patents

II.23 Miscellaneous

ICIST - Instituto de Engenharia de Estruturas, Território e Construção Group 2 -MMAS

__________________________________________________________________________________________

42

RESEARCH GROUP – MECHANICS, MODELLING AND

ANALYSIS OF STRUCTURES

RESEARCH GROUP CO-ORDINATOR – PROF. PEDRO BORGES

DINIS


I.1 Budget

BUDGET (euros)

FCT Other Funding

STRATEGIC PROJECT

FCT

Projects

Int. R&D

Projects

Other research

grants Consultancy Total

38.427,23 21.199,58 0,00 0,00 9.699,00 69.325,81

I.2 Personnel


Eligible in 2011



Phd researchers

António Manuel Figueiredo Pinto da

Costa

Assistant

Professor

X X

Carlos M. Tiago T. Fernandes Assistant

Professor

X X

Cilmar Dozineti Basaglia Post Doc X X

Dinar Reis Zamith Camotim Associate

Professor

X X

Ionut Dragos Moldovan Assistant

Professor

X

Eduardo António Borges Pires Associate

Professor

X X

Eduardo de Arantes e Oliveira Full

Professor

X

Eduardo Manuel Baptista Ribeiro Associate X

ICIST - Instituto de Engenharia de Estruturas, Território e Construção Group 2 - MMAS

__________________________________________________________________________________________

43

Pereira Professor

Fernando Manuel Simões Assistant

Professor

X X

Hugo Freixial Argente dos Santos Post Doc X

João António Teixeira de Freitas Full

Professor

X X

Jorge Manuel Vinagre Alfaiate Assistant

Professor

X X

José Paulo Baptista Moitinho Almeida

Associate

Professor w/

Aggregation

X

X

Júlio Balsa Pargana Post Doc X

Luís Manuel S. S. Castro Associate

Professor

X X

Manuel Cunha Ritto Corrêa Assistant

Professor

X X

Nuno Miguel Pereira Silvestre Assistant

Professor

X X

Orlando José B. A. Pereira Assistant

Professor

X X

Pedro Guilherme Sampaio Parreira Associate

Professor

X

Pedro Manuel Castro Borges Dinis Assistant

Professor

X X

Pedro Miguel Almeida Areias Assistant

Professor

X X

Rui Alexandre Silva Bebiano Research

Assistant

X X

Vítor Manuel Azevedo Leitão

Associate

Professor w/

Aggregation

X

X

MSc Researchers

Bruno Miguel Faria X

Cao Duc Toan X

Catarina Isabel de Almeida Paulo X

David Manuel Galaz Tavares X

Luís André Marcos Mendes X

Maria José Quirino Rosa Duarte X


__________________________________________________________________________________________

44

Mário Rui Tiago Arruda X

Matilde Pós-De-Mina Pato Research

Assistant

X

Mohamed Ali El-Sayed Agwa X

Pham Tien Cuong X

Pedro Alexandre Simões Martins

Natário

X

Pedro Manuel Garcia Vieira Neto Research

Assistant

X

Rui Carlos Gonçalves Graça e Costa Research

Assistant

X


André Filipe Biscaya Semedo Pereira da Graça

X

João Vasco Mano Marques X

Miguel da Silva Abambres X

Nuno Miguel de Freitas Silva X

Rui Pedro Trindade Fena X

Technical staff


Conceição Melo

Manuela Carvalho

PERSONNEL - RESUME



PhD researchers 20 2 1 23

MSc researchers 9 4 13

Graduate 4 1 5

Technical staff

Administrative staff 2 2

Others


__________________________________________________________________________________________

45

Leadership

Since January 2011, Prof. Pedro Borges Dinis is the coordinator of this research Group. All the Group

Ph.D. members meet formally once a year, in order (i) to decide about major investments and/or

resource sharing, (ii) to analyse the annual report and plan or (iii) to discuss matters related to

research activities under way or planned for the future. Since the informal contacts and the working

interaction between all Group members are frequent and easy, the tasks associated with sharing the

information or coordinating all the activities become very easy and run rather smoothly. Moreover, the

informal contacts between the Group members are complemented by internal Seminars and/or by the

quick dissemination of all new publications co-authored by these members.


Facilities

The facilities used by the members of this research Group belong to DECivil and consist of 18 offices

and 3 secretariat rooms. Moreover, the facilities of the LMC (Laboratory of Computational Mechanics)

are shared with the other research Groups of ICIST.





In progress 12.66 14

M.Sc. dissertations Concluded 9 9

In progress 6.5 8

Publications


International peer-reviewed journals (ISI/Scopus)

30 34


2 2


International 1 1

National 1 1


International 40.5 42

National 9 10

Books

Entire - -

Chapters - -

As editor 1 1

Reports 1


__________________________________________________________________________________________

46




International 14

National -


International 21

National 7


International 8

National 4


International 13

National 4


National 6




Submitted -

Awarded -

In progress 5


Submitted 2

Awarded 1

In progress 11


National 13


National -

Awards (national and international) 3





5

Models -


Pilot plants -

Prototypes -

Patents 1



__________________________________________________________________________________________

47




This Group is centred on the study and development of the theoretical foundations, the modelling procedures and

the computational tools that are needed for the analysis and design of structures, as well as for the

understanding of their mechanical behaviour. The activity was divided in 4 major areas:

(i) Modelling of non linear material behaviour and related instabilities. The following aspects were dealt with:

Evaluation of the contact pressures and stresses generated at the femoral and acetabular

cartilages as a result of the abnormal contact that occurs in a 3-D hip joint presenting a femoro-

acetabular impingement of the cam type and comparison with a non-cam hip joint;

A stress-driven growth rate law that satisfies the thermodynamic dissipation inequality, that requires

a positive internal entropy production, continued to be developed for fiber reinforced biological

porous media;

Modelling of cohesive fracture of concrete.

(ii) Development of computational/numerical formulations. Innovative techniques were developed, namely:

Extension into elastoplasticity of the computer program developed for the dynamic analysis of

poroelastic soils and based on the Hybrid-Trefftz Finite Elements;

Assessment of the model developed for hydration of early age concrete and initiation of its

extension to thermomechanical coupling;

Assessment of the model developed for Trefftz modelling of open and cohesive cracks and initiation

of its extension to modelling of crack propagation;

Formulation and preliminary implementation of adaptive 3D Trefftz elements and coupling with the

existing parallelization platform.

(iii) Analysis, behaviour and design of thin-walled structures. The following issues were addressed:

GBT formulations to analyse the local, distortional and global post-buckling behaviour of arbitrarily

complex cold-formed steel plane and space frames;

GBT buckling and post-buckling formulations to account for the load application effects in beams

and frames, making it possible to handle beams loaded of the cross-section shear centre;

Local/distortional, distortional/global and local/distortional/global mode interaction in cold-formed

steel members – analysis, behaviour and DSM design;

Post-buckling behaviour, ultimate strength and DSM design of cold-formed steel equal-leg angle

columns;

Novel approaches for the analysis and DSM design of thin-walled (cold-formed steel) continuous

beams and frames against complex failure mechanisms.


__________________________________________________________________________________________

48

(iv) Modelling and numerical analysis of carbon nanotubes (CNT). The following aspects were dealt with:

Molecular dynamics simulations for structural assessment of CNTs;

Stability, non-linear behaviour and collapse of CNTs;

Simulation of CNTs under combined loading (interaction phenomena);

Development of enhanced continuum models for CNT analysis.


The group developed the research activities that were planned for this period and tried to improve its international

links. As far as main achievements are concerned, the following should be mentioned:

3 Doctoral Theses successfully completed and defended.

34 papers published in international peer reviewed journals.

43 papers published in international conference proceedings.

14 memberships in editorial boards of international journals.

8 memberships of international committees for drafting design recommendations or codes.

21 memberships in scientific committees of international conferences.

1 software application (P. Areias)

1 referee for international funding agencies (J. P. Moitinho de Almeida)

1 Invited/Keynote/Plenary Lectures in international conferences (J.A.T. Freitas).

3 Awards: (i) UTL/Santander Totta Scientific Award 2010, given by the Technical University of Lisbon in the

scientific area of "Civil Engineering, Mechanical Engineering, Naval Engineering, Mining and Geological

Engineering, Aerospace Engineering, Territorial Engineering, Transportation, Biomechanics" (N. Silvestre), (ii)

Honour Diploma concerning the UTL/Santander Totta Scientific Award 2010, given by the Technical University of

Lisbon in the scientific area of "Civil Engineering, Mechanical Engineering, Naval Engineering, Mining and

Geological Engineering, Aerospace Engineering, Territorial Engineering, Transportation, Biomechanics" (D.

Camotim) and (iii) Honour Diploma awarded by "Reitoria" of the Technical University of Lisbon (D. Camotim).



The objective of reinforcing the internationalisation will be pursued and the members of this group will be

encouraged to submit proposals of R&D projects to FCT. The cooperation within the research centre will be

promoted, particularly in areas sharing common activities (e.g., composite thin-walled members).

The research activities of Group 2 evolved focusing on the following 4 major research domains:

(i) Modelling of non linear material behaviour and related instabilities. The following topics will be

investigated:

Development of growth laws for biological porous media like articular cartilage that satisfy the


__________________________________________________________________________________________

49

thermodynamic dissipation inequality

Biomechanical modelling of the femoro-acetabular impingement of the cam type;

Characterization of constitutive laws to model the mechanical behaviour of rubberized concrete

(RuC) and development of numerical models of steel tubes filled with RuC.

(ii) Development of computational/numerical formulations. The application of innovative techniques will be

addressed in the following areas:

Digital processing of medical images and construction of volumetric meshes;

Evaluation of the pressures and stresses generated at the cartilages of normal hip joints and of hip joints

presenting femoro-acetabular impingement of the cam type

Development of hybrid-mixed stress finite element models based on the use of Legendre

polynomials for cohesive fracture analysis of concrete structures;

Parallel implementation of hybrid-mixed stress models for the physically non-linear analysis of 3D

structures;

Use of polynomial and trigonometric wavelet systems for the development of hybrid-mixed stress

finite element models for the non-linear analysis of concrete structures;

Implementation and assessment of the non-linear modelling of the dynamic response of partially

saturated with hybrid-Trefftz elements;

Implementation and assessment of the non-linear, transient hygro-thermo-chemical model of

cement hydration;

Implementation and assessment of the non-linear, transient thermo-mechanical model of early age

concrete;

Implementation of (embedded) crack propagation in the hybrid-Trefftz model for cohesive fracture of

concrete.

(iii) Analysis, behaviour and design of thin-walled structures. The research activity will be devoted to the

following issues/topics:

Development of 1D models to assess the local, distortional and global elastic and elastic-plastic

buckling and post-buckling behaviour of non-standard members, such as tapered and/or curved

steel beams and beam columns;

Development of geometrically exact compact and thin-walled beam formulations including cross-

section deformation;

Develop GBT formulations to analyse the local, distortional and global post-buckling behaviour of

arbitrarily complex cold-formed steel plane and space frames;

Develop GBT buckling and post-buckling formulations to account for the load application effects in

beams and frames, making it possible to handle beams loaded of the cross-section shear centre

and to analyse the web crippling phenomenon;

Develop GBT first-order, buckling and second-order plastic hinge elastic-plastic formulations to

analyse thin-walled members and frames;


__________________________________________________________________________________________

50

Continue to investigate local/distortional, distortional/global and local/distortional/global mode

interaction in cold-formed steel members – analysis, behaviour and DSM design;

Continue to investigate the buckling behaviour, post-buckling behaviour, ultimate strength and DSM

design of cold-formed steel equal-leg angle columns;

Continue to develop novel approaches for the analysis and DSM design of thin-walled (cold-formed

steel) continuous beams and frames against complex failure mechanisms.

(iv) Modelling and numerical analysis of carbon nanotubes. The research activity will be devoted to the following

issues/topics:

assess the stability, non-linear behaviour and collapse of CNTs under combined loading (interaction

phenomena);

use molecular dynamics simulations to evaluate the mechanical behaviour of CNT-based composite

materials;

study the interfacial strength between CNTs and matrix (either polymeric or metallic);

develop finite element models to simulate the mechanical behaviour of nano-composite materials

with CNTs.


A. Ph.D. theses

A.1 Concluded


and date


only)

Mohamed Ali El-

Sayed Agwa

Friction-iduced dynamic instabilities

and solution (non-uniqueness in

contact mechanics (Instabilidades

dinâmicas e (não-unicidade de

soluções devidas ao atrito em

mecânica do contacto)

IST/UTL

(Set. 2011)

Engineering

Sciences

Supervisor: A. Pinto da

Costa

Luís André

Marcos Mendes

Modelos tridimensionais para a

análise sísmica de estruturas de

betão armado (Refined three-

dimensional seismic analysis of

reinforced concrete structures)

IST/UTL

(Oct. 2011)

Civil

Engineering

Co-Supervisor: L.M.S.

Castro

Mário Rui Tiago

Arruda

Análise estática e dinâmica de

estruturas de betão utilizando

modelos de dano (Static and

IST/UTL

(Dec. 2011)

Civil

Engineering

Supervisor: L.M.S.

Castro


__________________________________________________________________________________________

51

dynamic analysis of concrete

structures using damage

mechanics)

A.2 In progress


(starting

year)


only)

Vladimir

Ivannikov

On the nonlinear analysis of

shells using meshless related

methods (Análise não linear de

cascas usando métodos sem

malha)

IST/UTL

(2011)

Civil

Engineering

Supervisors: C. Tiago/J.

P. Moitinho de Almeida

João Pedro

Lage da Costa

Firmo

Fire behaviour of reinforced

concrete structural elements

strenghtened with CFRP systems

(Comportamento de elementos

estruturais de betão armado

reforçados com sistemas de

CFRP em situação de incêndio)

IST/UTL

(2011)

Civil

Engineering

Supervisor: João

Correia (RG 3)

Co-supervisors C. Tiago

(RG 2) / Paulo França

(RG 4)

Pedro Manuel

Garcia Vieira

Neto

Numerical modelling of the

concrete-CFRP interface

behaviour (Modelação numérica

do comportamento da interface

betão-CFRP)

ESB Barreiro

/IPS

(2009)

Civil

Engineering

Supervisor: J. Alfaiate

Rui Carlos

Gonçalves

Graça e Costa

The development of non-iterative

numerical methods applied to the

nonlinear analysis of structures

(O desenvolvimento de métodos

numéricos não-Iterativos

aplicados à análise não linear de

estruturas)

EST Faro /UA

(2007)

Civil

Engineering

Supervisor: J. Alfaiate

Catarina Isabel

de Almeida

Paulo

Modelação da fractura coesiva

em estruturas de betão

(Cohesive fracture analysis of

concrete structures)

IST/UTL (2009)

Civil

Engineering

Supervisor: L.M.S.

Castro


__________________________________________________________________________________________

52

Ângela Neves Comportamento não linear

monotónico e cíclico de

elementos estruturais e pórticos

de aço leve (Non-linear

monotonic and cyclic behaviour

of cold-formed steel members

and frames)

FCT/ U Coimbra

(2010)

Civil

Engineering

Supervisor: N. Silvestre

Mário José

Loureiro de

Figueiredo e Sá

Análise de Painéis de Laje

Multicelulares Pultrudidos em

GFRP – Aplicação em Pontes

Pedonais. (Structural behaviour

of GFRP pultruded footbridges)

IST/UTL

(2009)

Civil

Engineering

Supervisors: A. Gomes

Co-Supervisor: N.

Silvestre/ J. R. Correia

Miguel da Silva

Abambres

Comportamento e capacidade

resistente de elementos

estruturais em aço inoxidável

(Behaviour and load carrying

capacity of stainless steel

structural members)

IST/UTL

(2009)

Civil

Engineering


Co-Supervisor: D.

Camotim

Pedro Alexandre

Simões Martins

Natário

Reforço de estruturas metálicas de

parede fina com CFRP:

comportamento, análise e

dimensionamento (CFRP

strengthening of thin-walled steel

structures: behaviour, analysis

and design)

IST/UTL

(2009)

Civil

Engineering


Co-Supervisor: D.

Camotim

Nuno Miguel de

Freitas Silva

Comportamento estrutural e

resistência última de perfis

laminados compósitos com

secção de parede fina (Structural

behavior and ultimate strength of

laminate composite thin-walled

members)

IST/UTL

(2006)

Civil

Engineering

Supervisor: D. Camotim

Co-Supervisor: N.

Silvestre

Cao Duc Toan Dynamic analysis of elastoplastic

saturated porous media with

hybrid-Trefftz elements (Análise

dinâmica elastoplástica de meios

porosos saturados com

elementos híbridos-Trefftz)

UCP (2009) Civil

Engineering

Co-Supervisor: J.A.T.

Freitas


__________________________________________________________________________________________

53

Maria José

Quirino Rosa

Duarte

Modelling of cohesive fracture in

concrete structures (Modelação

da fractura coesiva em estruturas

de betão)

IST/UTL

(2009)

Computational

Engineering

Supervisors: J.A.T.

Freitas, J. Alfaiate

Pham Tien

Cuong

Modelação do comportamento

termomecânico de betões jovens

(Modelling of the

thermomechanical response of

early age concrete)

IST/UTL

(2010)

Civil

Engineering

Supervisor: J.A.T.

Freitas

Andréa

Gonçalves

Rodrigues das

Dôres

Análise de Estruturas

Constituídas por Perfis de Aço

Formados a Frio com Base na

Teoria Generalizada de Vigas

(GBT)

Universidade

Federal de

Ouro Preto

(Brasil)

(2010)

Civil

Engineering

Co-Supervisor: D.

Camotim


B.1 Concluded


and date

Course Supervisors

(ICIST only)

Daniel Dias Maia Comparação de elementos finitos na

análise estrutural de lajes finas (Finite

elements comparison on thin plate

analysis)

IST/UTL

(Nov. 2011)

Civil

Engineering

Supervisor: C.

Tiago

Pedro Miguel de

Matos Sanches

Elementos finitos triangulares

compatíveis na análise estrutural de

lajes finas (Compatible triangular finite

elements comparison in thin plate

analysis)

IST/UTL

(Nov. 2011)

Civil

Engineering

Supervisor: C.

Tiago

Olivier Rodrigues

Passos

Análise plástica de lajes. Cálculo de

minorantes e majorantes da carga de

colapso (Plastic analysis of slabs using

equilibrated models)

IST/UTL

(Out. 2011)

Civil

Engineering

Supervisor: J.P.

Moitinho de Almeida

Tânia Neta Dias Acção do polímero na velocidade de

corrosão do aço induzida por

carbonatação em argamassas

cimentícias - estudo de argamassas

cimentícias modificadas com polímeros

IST/UTL

(Nov. 2011)

Civil

Engineering

Supervisor: O.

Pereira


__________________________________________________________________________________________

54

(Polymer action on corrosion rates of

steel in cement mortar - study of

polymer-modified cement mortars)

António Pedro

Carones Duarte

Colapso por esmagamento de alma em

vigas de aço leve: análise e

dimensionamento (Web crippling failure

in cold-formed steel beams: analysis

and design)

IST/UTL

(Nov. 2011)

Civil

Engineering

Supervisor: N.

Silvestre

Gonçalo Nuno

Pereira de

Campos Barbosa

Análise e dimensionamento de cascas

metálicas de acordo com o Eurocódigo 3

(Analysis and design of steel shells

according to Eurocode 3)

IST/UTL

(July 2011)

Civil

Engineering

Supervisor: N.

Silvestre

Carlos Eduardo

Aniceto de Serra

Barreta

Interacção entre instabilidade local-de-

placa e distorcional em colunas de aço

enformadas a frio de secção em Z

(Local-plate/distortional mode interaction in

cold-formed steel Z-section columns)

IST/UTL

(May 2011)

Civil

Engineering

Supervisor: P. B.

Dinis

Co-Supervisor: D.

Camotim

Rui Pedro

Trindade Fena

Interacção entre instabilidade local de

placa e distorcional em colunas de aço

enformadas a frio com secção em ‘hat’

(Local/distortional mode interaction in

cold-formed steel hat-section columns)

IST/UTL

(Dec. 2011)

Civil

Engineering

Supervisor: P. B.

Dinis

Co-Supervisor: D.

Camotim

João Vasco Mano

Marques

Modelação do comportamento térmico

de betões jovens (Modelling of the

thermal response of early age concrete)

IST/UTL

(Sept.

2011)

Civil

Engineering

Supervisors: J.A.T.

Freitas, J.B.

Pargana

B.2 In progress


(ICIST only)

Miguel de Morais

Tavares

Estabilidade aerodinâmica de

estruturas: aplicação à análise de

tabuleiros de pontes (Aerodynamic

stability of structures: application to the

analysis of bridge decks)

IST/UTL Civil

Engineering

Supervisors: A.

Pinto da Costa/

F.M.F. Simões

Rui Maciel Análise não-linear de estruturas

utilizando elementos finitos

tridimensionais (Nonlinear analysis of

structures using three dimensional finite

IST/UTL Civil

Engineering

Supervisor: C. Tiago


__________________________________________________________________________________________

55

elements)

Francisco Felício

Nunes

Comportamento estrutural de vigas de

GFRP reforçadas com mantas de

CFRP: caracterização experimental

(Structural behaviour of GFRP beams

strengthened with CFRP sheets:

experimental tests)

IST/UTL Civil

Engineering

Supervisor: João

Correia

Co-Supervisor: N.

Silvestre

Gonçalo Duarte

Belo Ribeiro

Barreto

Análise e dimensionamento de

estruturas de edifícios muito altos

sujeitos à acção do vento (Analysis and

design of high-rise building structures

subjected to wind action)

U Coimbra

- FCT

Civil

Engineering

Supervisor: N.

Silvestre

João Coelho Estabilidade e capacidade resistente de

colunas compósitas de GFRP (Stability

and load carrying capacity of GFRP

pultruded columns)

IST/UTL Civil

Engineering

Supervisor: N.

Silvestre

Manuel Mendes

Correia


GFRP reforçadas com mantas de

CFRP: modelação numérica (Structural

behaviour of GFRP beams strengthened

with CFRP sheets: numerical modelling)

IST/UTL Civil

Engineering

Supervisor: N.

Silvestre


Correia

Hugo Moreira A utilização do sistema LSF na

reabilitação de estruturas de edifícios

(The use of LSF systems in the

rehabilitation of building structures)

IST/UTL Civil

Engineering

Supervisor: N.

Silvestre

Co-Supervisor:

Fernando Branco

Tiago Figueiredo

Diogo Pires

Comportamento e capacidade

resistente de colunas de aço SEHS

(Behaviour and load carrying capacity of

SEHS steel columns)

IST/UTL Civil

Engineering

Supervisor: N.

Silvestre



1. Dias-da-Costa, D.; Veludo, J.; Alfaiate, J.; Júlio, E.: "An element enriched formulation for simulation of

splitting failure", Engineering Fracture Mechanics, V. 78, n.º 2, Jan. 2011, pp. 301-316. (IF= 1.576; NC=0)

2. Ferreira, A.J.M.; Castro, L.M.S.; Bertoluzza, S.: "A wavelet collocation approach for the analysis of laminated

shells", Composites: Part B, V. 42, Elsevier, January 2011, pp. 99-104. (IF=1.763; NC=0)


__________________________________________________________________________________________

56

3. Dinis, P.B.; Camotim, D.: "Post-buckling behaviour and strength of cold-formed steel lipped channel columns

experiencing distortional/global interaction", Computers & Structures, V. 89, n.º 3-4, Elsevier, February 2011,

pp. 422-434. (IF=1.722; NC=0)

4. Santos H., Almeida, J.P.M., "Dual extremum principles for the geometrically nonlinear analysis of beams",

International Journal of Non-Linear Mechanics, 46, January 2011, pp. 151-158. (IF=1.388, NC=1)

5. Camotim, D.; Zandonini, R.: "Foreword", Advanced Steel Construction an International Journal, V. 7, n.º 1,

March 2011, pp. i-ii. (IF=0.296; NC=0)

6. Dinis, P.B.; Camotim, D.; Batista, E.; Santos, E.: "Local/distortional/global mode coupling in fixed lipped

channel columns: behaviour and strength", Advanced Steel Construction an International Journal, V. 7, n.º

4, March 2011, pp. 113-130. (IF=0.296; NC=0)

7. Freitas, J.A.T.; Moldovan, I.D.: "Hybrid-Trefftz stress element for bounded and unbounded poroelastic media",

International Journal for Numerical Methods in Engineering, 85, n.º 10, Wiley, March 2011, pp. 1280-1299.

(IF=1.928; NC=0)

8. Landesmann, A.; Camotim, D.: "On the distortional buckling, post-buckling and strength of cold-formed steel

lipped channel columns under fire conditions", Journal of Structural Fire Engineering, V. 2, n.º 1, March 2011,

pp. 1-19. (IF=0.000; NC=0)

9. Silvestre, N.; Gardner, L: "Elastic local post-buckling of elliptical tubes", Journal of Constructional Steel

Research, V. 67, n.º 3, Elsevier, UK, March 2011, pp. 281-292. (IF=1.003, NC=1)

10. Ferreira, A.J.M.; Castro, L.M.S.; Roque, C.M.C; Reddy, J.N.; Bertoluzza, S.: "Buckling analysis of laminated

plates by wavelets", Computers & Structures, V. 89, Elsevier, April 2011, pp. 626-630. (IF=1.722; NC=1)

11. Agwa, M.A.; Pinto da Costa, A.: "Surface instabilities in linear orthotropic half-spaces with a frictional interface",

Journal of Applied Mechanics, ASME, V. 78, n.º 1, paper 041002, ASME, USA, May 2011, pp. 041002-1 to 9.

(IF=0.915, NC= 0)

12. Camotim, D.; Dinis, P.B.: "Coupled instabilities with distortional buckling in cold-formed steel lipped channel

columns", Thin-Walled Structures, V. 49, n.º 5, May 2011, pp. 562-575. (IF=1.103; NC=0)

13. Gago, A. S., Alfaiate, J., Lamas, A.R.G., "The effect of the infill in arched structures: analytical and numerical

modelling", Journal of Engineering Structures, V. 3, n.º 5, May 2011, pp. 1450-1458. (IF=1.363; NC=0)

14. Areias, P.; Van Goethem, N.; Pires, E.B.: "A damage model for ductile crack initiation and propagation",

Computational Mechanics, V. 47, n.º 6, Springer, June 2011, pp. 641-656. (IF=1.822; NC=0)

15. Dias, J.L.R.; Silvestre, N.: "A neural network based closed-form solution for the distortional buckling of

elliptical tubes", Engineering Structures, 33, n.º 6, Elsevier, UK, June 2011, pp. 2015-2024. (IF=1.363, NC=0)

16. Freitas, J.A.T.; Moldovan, I.D.: "Hybrid-Trefftz displacement element for bounded and unbounded poroelastic

media", Computational Mechanics, V. 48, n.º 6, Springer, June 2011, pp. 659-673. (IF=1.822; NC=0)

17. Pato, M.P.M.; Santos, N.J.G;, Areias, P.; Pires, E.B.; Carvalho, M. d; Pinto, S.; Lopes, D.S.: "Finite element

studies of the mechanical behaviour of the diaphragm in normal and pathological cases", Computer Methods

in Biomechanics and Biomedical Engineering, V. 14, n.º 6, Taylor and Francis, UK, June 2011, pp. 505-513.

(IF=1.573; NC=0)

18. Silvestre, N.; Wang, C.M.; Zhang, Y.Y.; Xiang, Y.: "Sanders shell model for buckling of single-walled carbon


__________________________________________________________________________________________

57

nanotubes with small aspect ratio", Composite Structures, V. 93, n.º 7, Elsevier, UK, June 2011, pp. 1683-

1691. (IF=2.036, NC=0)

19. Ferreira, A.J.M.; Castro, L.M.S.; Bertoluzza, S.: "Analysis of plates on Winkler foundation by wavelet

collocation", Meccanica, V. 46, Springer, August 2011, pp. 865-873. (IF=1.056; NC=0)

20. Gonçalves, R.; Ritto-Corrêa, M.; Camotim, D.: "Incorporation of wall finite relative rotations in a geometrically

exact thin-walled beam element", Computational Mechanics, V. 47, n.º 2, Springer, August 2011, pp. 229-244.

(IF=1.822, NC=0)

21. Sá, M.F.; Gomes, A.M.; Correia, J.R.; Silvestre N.: "Creep behavior of pultruded GFRP elements - Part 1:

Literature review and experimental study", Composite Structures, V. 93, n.º 10, Elsevier, UK, September

2011, pp. 2450-2459. (IF=2.036, NC=0)

22. Sá, M.F.; Gomes, A.M.; Correia, J.R.; Silvestre N.: "Creep behavior of pultruded GFRP elements - Part 2:

Analytical study", Composite Structures, V. 93, n.º 9, Elsevier, UK, August 2011, pp. 2409-2418. (IF=2.036,

NC=0)

23. Areias, P.; Garção, J.; Pires, E.B., Barbosa, J.I.: "Exact corotational shell for finite strains and fracture", Computational

Mechanics, V. 48, n.º 4, Springer, October 2011, pp. 385-406. (IF=1.822; NC=0)

24. Camotim, D.; Skaloud, M.: "Foreword", International Journal of Structural Stability and Dynamics, V. 11, n.º 5,

World Scientific Press, October 2011, pp. v-vii. (IF=0.644, NC=0)

25. Dinis, P.B.; Camotim, D.: "Local/distortional/global mode interaction in simply supported cold-formed steel

lipped channel columns", International Journal of Structural Stability and Dynamics, V. 11, n.º 5, World

Scientific Press, October 2011, pp. 877-902. (IF=0.644, NC=0)

26. Gonçalves, R.; Camotim, D.: "GBT-based finite elements for elastoplastic thin-walled metal members", Thin-Walled

Structures, V. 49, n.º 10, October 2011, pp. 1237-1245. (IF=1.103; NC=0)

27. Silvestre, N.; Camotim, D.; Silva, N.F.: "Generalised beam theory revisited: from the kinematical assumptions

to the deformation mode determination", International Journal of Structural Stability and Dynamics, V. 11, n.º

5, World Scientific Press, October 2011, pp. 969-997. (IF=0.644, NC=0)

28. Adam, J.M.; Camotim, D.; Dimitrovová, Z.; Dunai, L; Marti, K.; Pallarés, F.J.; Pombo, J.; Saka, M.P.; Schuëller,

G.I.; Vietor, T.; Costa Neves, L.F.; Barros, R.C., Topping, B.H.V.: "Editorial", Computers & Structures, V. 89,

n.º 21-22, Elsevier, November 2011, pp. 1841-1843. (IF=1.722; NC=0)

29. Basaglia, C.; Camotim, D.; Silvestre, N.: "Non-linear GBT formulation for open-section thin-walled members

with arbitrary support conditions", Computers & Structures, V. 89, n.º 21-22, Elsevier, November 2011, pp.

1906-1919. (IF=1.722; NC=0)

30. Correia, J.R.; Branco, F.A.; Silva, N.F.; Camotim, D.; Silvestre, N.: "First-order, buckling and post-buckling

behaviour of GFRP pultruded beams Part 1: experimental study", Computers & Structures, V. 89, n.º 21-22,

Elsevier, November 2011, pp. 2052-2064. (IF=1.722; NC=0)

31. Faria, B.; Silvestre, N.; Canongia Lopes, J.N.: "Interaction diagrams for carbon nanotubes under combined

shortening-twisting", Composites Science and Technology, V. 71, n.º 16, Elsevier, UK, November 2011, pp.

1811-1818. (IF=2.863, NC=0)

32. Santos H.; Pimenta, P.M.; Almeida, J.P.M.: "A hybrid-mixed finite element formulation for the geometrically

exact analysis of three-dimensional framed structures", Computational Mechanics, V. 48, n.º 5, Springer,


__________________________________________________________________________________________

58

November 2011, pp. 591-613. (IF=1.822, NC=0)

33. Silva, N.; Camotim, D.; Silvestre, N.; Correia, J.R.; Branco, F.A.: “First-Order, Buckling and Post-Buckling

Behaviour of GFRP Pultruded Beams Part 2: Numerical Simulation”, Computers and Structures, V. 89, n.º 21-

22, Elsevier, UK, November 2011, pp. 2065-2078 (IF=1.722; NC = 1)

34. Wang, C.M.; Tay, Z.Y.; Chowdhury, A.N.R.; Duan, W.H.; Zhang, Y.Y.; Silvestre N.: "Examination of cylindrical

shell theories for buckling of carbon nanotubes", International Journal of Structural Stability and Dynamics, V. 11,

n.º 6, World Scientific Press, December 2011, pp. 1035-1058. (IF=0.644, NC=0)


1. Rego, P.; Jorge, J.P.; Simões, F.M.F.; Pires, E.B.; Lopes, D.S.; Pinto, P.; Spranger, A.; Oliveira, F.; Gaspar, A.;

Monteiro, J. (2011): "Pressão de contacto intra-articular no conflito femuro-acetabular. Contributo para o seu

melhor esclarecimento através de estudo tridimensional por elementos finitos", Revista Portuguesa de Ortopedia e

Traumatologia, V. 19, Sociedade Portuguesa de Ortopedia e Traumatologia, Lisboa, 2011, pp. 5-16.

2. Santos, H., Almeida, J.P.M. (2011): "Formulação de elementos finitos de equilíbrio para a análise

geometricamente exacta de estruturas porticadas", Revista Portuguesa de Engenharia de Estruturas, Série II, 9,

2011, pp. 57-67.




1. Silvestre, N.: "Características Estruturais na Marcação CE dos Produtos de Aço", Revista Metálica, Secção de

Legislação e Normalização, n.º 24, Abril 2011.



1. Jesus, A.H., Cismasiu, I., Freitas, J.A.T.: "Fully automatic p-adaptive hybrid-Trefftz displacement elements",

Computer Methods in Mechanics (CMM2011), Warsaw, Poland, May 9-12, 2011.

2. Moldovan, I.D.; Cao, C.T.; Freitas, J.A.T.: "Hybrid-Trefftz displacement and stress elements for biphasic

elastostatics", Computer Methods in Mechanics (CMM2011), Warsaw, Poland, May 9-12, 2011.

3. Basaglia, C.; Camotim, D.: "On the Incorporation of Load Application Effects in the GBT Buckling Analysis of

Thin-Walled Steel Beams and Frames", USB Key Drive Proceedings of Structural Stability Research Council

(SSRC) 2011 Annual Stability Conference, Pittsburgh, May 10-14, 2011.

4. Dinis, P.B.; Camotim, D.: "Buckling, Post-Buckling and Strength of Cruciform Columns", USB Key Drive

Proceedings of Structural Stability Research Council (SSRC) 2011 Annual Stability Conference, Pittsburgh,

May 10-14, 2011.

5. Landesmann, A.; Camotim, D.: "DSM design of Cold-Formed Steel Columns Against Distortional Failure:

Investigation on the Influence of the Cross-Section Geometry and Support Conditions", USB Key Drive

Proceedings of Structural Stability Research Council (SSRC) 2011 Annual Stability Conference, Pittsburgh,


__________________________________________________________________________________________

59

May 10-14, 2011.

6. Ivannikov V.; Tiago C.; Moitinho de Almeida J.P.; Díez P.: "Meshless methods in dual analysis: theoretical

and implementation issues", V International Conference on Adaptive Modeling and Simulation (ADMOS),

edited by D. Aubry, P. Díez, B. Tie and N. Parés, pp. 291-308, Paris, France, June 6- 8, 2011.

7. Santos, H.; Moitinho de Almeida, J.P.: "A duality based error estimation approach for the geometrically exact

analysis of 3d framed structures", ADMOS 2011, Paris, June 6- 8, 2011.

8. Areias, P.; Van Goethem, N.; Pires, E.B.: "Constrained ALE-Based Discrete Fracture in Shells with Quasi-

Brittle and Ductile Materials", International Conference on Computational Modeling of Fracture and Failure of

Materials and Structures (CFRAC 2011), Barcelona, Spain, June 6-8, 2011.

9. Van Goethem, N.; Areias, P.; Pires, E.B.: "A Temperature-Dependent Damage Model for Ductile Crack

Initiation and Propagation with Finite Strains", International Conference on Computational Modeling of

Fracture and Failure of Materials and Structures (CFRAC 2011), Barcelona, Spain, June 6-8, 2011.

10. Costa, R.; Alfaiate, J.; Dias-da-Costa, D.; Sluys, L.J.: "A non-iterative approach for the modelling of quasi-

brittle materials", CFRAC 2011, Barcelona, June 6-8, 2011.

11. Dias-da-Costa, D.; Alfaiate, J.; Sluys, L.J.; Júlio, E.: "Kinematical enhancement of the finite element in front of

the crack tip", CFRAC 2011, Barcelona, June 6-8, 2011.

12. Abambres, M.; Camotim, D.; Silvestre, N.: "Elasti-Plastic Analysis of Thin-Walled Members in the Contexto of

Generalised Beam Theory", Numerical Methods in Engineering 2011 (CMNE 2011), A. Tadeu et al. (Eds.),

Coimbra, p. 151, June 14-17, 2011. (full paper in CD-ROM Proceedings) (Portuguese)

13. Andrade, A.; Challamel, N.; Providência, P.; Camotim, D.: "Lateral-Torsional Buckling of Tapered Strip

Cantilevers", Numerical Methods in Engineering 2011 (CMNE 2011), A. Tadeu et al. (Eds.), Coimbra, p. 156,

June 14-17, 2011. (full paper in CD-ROM Proceedings) (Portuguese)

14. Arruda, M.R.T.; Castro, L.M.S.: "Modelos de dano contínuo com elementos finitos híbridos-mistos de tensão",

Congresso de Métodos Numéricos em Engenharia (CMNE 2011), Coimbra, Portugal, Art. 230, June 14-17,

2011

15. Basaglia, C.; Camotim, D.: "Buckling Behaviour of Steel Trusses: Application of Generalised Beam Theory

(GBT)", Numerical Methods in Engineering 2011 (CMNE 2011), A. Tadeu et al. (Eds.), Coimbra, p. 157, June

14-17, 2011. (full paper in CD-ROM Proceedings) (Portuguese)

16. Dinis, P.B.; Camotim, D.: "Post-Buckling and Ultimate Strength of Angle and Cruciform Columns:

Comparative Study", Numerical Methods in Engineering 2011 (CMNE 2011), A. Tadeu et al. (Eds.), Coimbra,

p. 162, June 14-17, 2011. (full paper in CD-ROM Proceedings) (Portuguese)

17. Fena, R.; Dinis, P.B.; Camotim, D.: "Local/Distortional Interaction in Hat-Section Cold-Formed Steel

Columns", Numerical Methods in Engineering 2011 (CMNE 2011), A. Tadeu et al. (Eds.), Coimbra, p. 159,

June 14-17, 20011. (full paper in CD-ROM Proceedings) (Portuguese)

18. Freitas, J.A.T.; Pham, C.T.; Pargana, J.B.: "Hybrid-mixed finite element modelling of the early age thermal

response of concrete", Congresso de Métodos Numéricos em Engenharia, Coimbra, Portugal, June 14-17,

2011.

19. Gonçalves, R.; Freitas, I.; Camotim, D.: "Application of Generalised Beam Theory to Beams Made of

Elatoplastic Materials", Numerical Methods in Engineering 2011 (CMNE 2011), A. Tadeu et al. (Eds.),


__________________________________________________________________________________________

60

Coimbra, p. 153, June 14-17, 2011. (full paper in CD-ROM Proceedings) (Portuguese)

20. Moldovan, I.D.; Cao, C.T.; Freitas, J.A.T.: "Hybrid-Trefftz stress elements for biphasic elastostatics",

Congresso de Métodos Numéricos em Engenharia, Coimbra, Portugal, June 14-17, 2011.

21. Natário, P.; Silvestre, N.; Camotim, D.: "Use of Generalised Beam Theory to Analyse the Web Localised

Buckling in Cold-Formed Steel Beams", Numerical Methods in Engineering 2011 (CMNE 2011), A. Tadeu et

al. (Eds.), Coimbra, p. 164, June 14-17, 2009. (full paper in CD-ROM Proceedings) (Portuguese)

22. Santos, H.; Almeida, J.P.M.: "Formulação de elementos finitos de equilíbrio para a anáalise geometricamente

exacta de vigas inicialmente curvas", Congresso de Métodos Numéricos em Engenharia (CMNE 2011),

Coimbra, Portugal, June 14-17, 2011.

23. Faria, B.; Silvestre, N.; Canongia Lopes, J.N.: "Strength and Stiffness of Carbon Nanotubes under Combined

Shortening and Twisting via Molecular Dynamics Simulations", Proceedings of 16th International Conference

on Composite Structures (ICCS 16), A. J. M. Ferreira (Ed.), FEUP, Porto, June 28-30, Paper 95, 2011.

24. Basaglia, C.; Camotim, D.: "Buckling, Post-Buckling, Collapse and Design of Three-Span Cold-Formed Steel

Beams", Advances in Steel and Aluminum Structures (ICSAS 2011), H.H. Lau (Ed.), Research Publishing

(Singapore), Kuching, pp. 158-164, July 13-15, 2011.

25. Natário, P.; Silvestre, N.; Camotim, D.: "On the Strength Prediction of Web Crippling Failure in Cold-Formed

Steel Beams", Advances in Steel and Aluminum Structures (ICSAS 2011), H.H. Lau (Ed.), Research

Publishing (Singapore), Kuching, pp. 137-142, July 13-15, 2011.

26. Dinis, P.B.; Camotim, D.: "Angle and Cruciform Columns: Similarities and Differences buckling, post-

buckling and strength behaviour", Proceedings of Sixth European Conference on Steel and Composite

Structures (Eurosteel 2011), L. Dunai, M. Iványi, K. Jármai, N. Kovács, L.G. Vigh (Eds.), ECCS (Brussels),

Budapest, pp. 105-110 (V. A), August 31 to September 2, 2011.

27. Dinis, P.B.; Camotim, D.; Fena, R.: "Local/Distortional Mode Interaction in Hat-Section Columns post-

buckling behaviour, strength and DSM design", Proceedings of Sixth European Conference on Steel and

Composite Structures (Eurosteel 2011), L. Dunai, M. Iványi, K. Jármai, N. Kovács, L.G. Vigh (Eds.), ECCS

(Brussels), Budapest, pp. 69-74 (V. A), August 31 to September 2, 2011.

28. Basaglia, C.; Camotim, D.: "GBT-Based Buckling Analysis of Cold-Formed Steel Trusses", Proceedings of Sixth

International Conference on Thin-Walled Structures – Recent Research Advances and Trends (ICTWS 2011), D.

Dubina, V. Ungureanu (Eds.), ECCS (Brussels), Timisoara, pp. 149-156 (V. 1), September 5-7, 2011.

29. Dinis, P.B.; Camotim, D.; Silvestre, N.: "On the Design of Cold-Formed Steel Angle Columns", Proceedings of

Sixth International Conference on Thin-Walled Structures – Recent Research Advances and Trends (ICTWS

2011), D. Dubina, V. Ungureanu (Eds.), ECCS (Brussels), Timisoara, pp. 271-279 (V. 1), September 5-7, 2011.

30. Natário, P.; Silvestre, N.; Camotim, D.: "Localized Web Buckling Analysis of Cold-Formed Steel Beams Using

GBT", Proceedings of Sixth International Conference on Thin-Walled Structures – Recent Research

Advances and Trends (ICTWS 2011), D. Dubina, V. Ungureanu (Eds.), ECCS (Brussels), Timisoara, pp. 197-

204 (V. 1), September 5-7, 2011.

31. Santos, E.; Dinis, P.B.; Batista, E.; Camotim, D.: "Local-Distortional-Global Mode Interaction in Lipped Channel

Columns: Experimental Results, Numerical Simulations and Design Considerations", Proceedings of Sixth

International Conference on Thin-Walled Structures – Recent Research Advances and Trends (ICTWS 2011),


__________________________________________________________________________________________

61

D. Dubina, V. Ungureanu (Eds.), ECCS (Brussels), Timisoara, pp. 361-369 (V. 1), September 5-7, 2011.

32. Schnierer, G.; Joó, A.L.; Silvestre N.: "Generalised Beam Theory Based Modal Response Spectrum

Analysis", Proceedings of 6th International Conference on Thin-Walled Structures (TWST 2011), D. Dubina,

V. Ungureanu (Eds.), ECCS, Timisoara, September 5-7, V. 1, pp. 213-220, 2011.

33. Silvestre, N.; Faria, B.; Canongia Lopes, J.N.: "Carbon Nanotubes: Are They Thin-Walled?", Proceedings of

6th International Conference on Thin-Walled Structures (TWST 2011), D. Dubina, V. Ungureanu (Eds.),

ECCS, Timisoara, September 5-7, V. 2, pp. 991-998, 2011.

34. Basaglia, C.; Camotim, D.: "Enhanced Generalised Beam Theory Buckling Formulations to Handle

Transverse Load Application Effects", Proceedings of Thirteenth International Conference on Civil, Structural

and Environmental Engineering Computing (CC 2011), B. Topping, Y. Tsompanakis (Eds.), Civil-Comp Press

(Stirling), Chania (Crete), paper 80, September 6-9, 2011.

35. Dias-da-Costa, D., Alfaiate, J., Sluys, L.J., Júlio, E.: "An Embedded Discrete Strong Discontinuity Approach

with Interelement Compatibility of the Enhanced Kinematical Field", Complas XI 2011. Barcelona, September

7-9, 2011.

36. Graça e Costa, R., Alfaiat,e J., Dias-da-Costa, D., Sluys, L.J.: "A new non-iterative approach to fracture",

Complas XI 2011, Barcelona, September 7-9, 2011.

37. Neto, P., Alfaiate, J.: "The influence of load misalignement on FRP-concrete bond behaviour, a numerical

study", Complas XI 2011. Barcelona, September 7-9, 2011.

38. Basaglia, C.; Camotim, D.: "Influence of the Load Point of Application on the Buckling Behaviour of Thin-

Walled Steel Beamd and Frames’", Proceedings of 2011 World Congress on Advances in Structural

Engineering and Mechanics (ASEM’11+), C-K. Choi (Ed.), Seoul, p. 67, September 18-22, 2011. (full paper in

cd-rom Proceedings pp. 836-852)

39. Landesmann, A.; Camotim, D.: "Influence of the Steel Constitutive Relation on the Numerical Analysis of

Cold-Formed Steel Columns Failing Distortionallly under Fire Conditions", Book of Abstracts of 32nd

Iberian-

Latin-American Congress on Computational Methods in Engineering (XXXII CILAMCE), A. Silva et al. (Eds.),

Ouro Preto, p. 254, November 13-16, 2011. (full paper in cd-rom Proceedings paper 7315) (Portuguese)

40. Santos, E.; Batista, E.; Camotim, D.; Dinis, P.B.: "Local-Distortional-Global Mode Interaction in Lipped Channel

Columns: Experimental Results, Numerical Simulations and Design", Book of Abstracts of 32nd Iberian-Latin-

American Congress on Computational Methods in Engineering (XXXII CILAMCE), A. Silva et al. (Eds.), Ouro

Preto, p. 69, November 13-16, 2011. (full paper in cd-rom Proceedings paper 8625) (Portuguese).

41. Arruda, M.R.T.; Castro, L.M.S.: "Continuum damage models using hybrid-mixed formulations", International

Conference on Recent Advances in Nonlinear Models - Structural Concrete Applications (CoRAN 2011), pp.

401-416, Coimbra, 24-25 November 2011.

42. Graça e Costa, R., Alfaiate, J., Dias-da-Costa, D., Sluys, L.J., Júlio, E.: "Numerical modelling of high strength

pre-stressed concrete beam using a non-iterative approach", CoRAN, 24-25 November, Coimbra, 2011.


1. Costa, R.; Alfaiate, J.; Dias-da-Costa, D.; Júlio, E.; Sluys, L.J.: "Numerical Modelling of a High-Strength

Prestressed Concrete Beam Using a Strong Discontinuity Approach”, International Conference on Recent

Advances in Nonlinear Models – Structural Concrete Applications (CoRAN 2011), Coimbra, Portugal, November


__________________________________________________________________________________________

62

24-25, 2011.

2. Jorge, J.P.; Simões, F.M.F.; Pires, E.B.; Rego, P.A.; Lopes, D.S.: "Simulação por Elementos Finitos do

Contacto Intra-articular no Conflito Fémuro-acetabular", Actas do 4º Congresso Nacional de Biomecânica,

pp. 517-522, Coimbra, Portugal, 4-5 de Fevereiro, 2011.

3. Simões, F.M.F.; Loret, B.: "Uma lei de crescimento de tecidos biológicos que satisfaz a desigualdade de

Clausius-Duhem", Actas do 4º Congresso Nacional de Biomecânica, Coimbra, 4-5 de Fevereiro

4. Abambres, M.; Camotim, D.; Silvestre, N.: "Physically Non-Linear Analysis of Metal Beams in the Context of

GBT", Proceedings of the VIII Congress on Steel and Composite Construction (CMM VIII), L. Silva et al.

(Eds.), Guimarães, pp. II-295-II-304, November 24-25, 2011. (Portuguese)

5. André, J.; Baptista, A.; Camotim, D.: "Quality Control and Strength Assessment of Adjustable Telescopic

Steel Props", Proceedings of the VIII Congress on Steel and Composite Construction (CMM VIII), L. Silva et

al. (Eds.), Lisboa, pp. II-611-II-620, November 24-25, 2011. (Portuguese)

6. Basaglia, C.; Camotim, D.: "Design of Cold-Formed Steel Continuous Beams", Proceedings of the VIII

Congress on Steel and Composite Construction (CMM VIII), L. Silva et al. (Eds.), Guimarães, pp. II-345-II-

354, November 24-25, 2011. (Portuguese)

7. Dinis, P.B.; Camotim; Silvestre, N.: "Structural Behaviour and Design of Angle Columns", Proceedings of the

VIII Congress on Steel and Composite Construction (CMM VIII), L. Silva et al. (Eds.), Guimarães, pp. II-335-

II-344, November 24-25, 2011. (Portuguese)

8. Graça, A.; Basaglia, C.; Gonçalves, R.; Camotim, D.: "Buckling Behaviour of Cold-Formed Steel Purlins

Accounting for the Sheeting Interaction Effects", Proceedings of the VIII Congress on Steel and Composite

Construction (CMM VIII), L. Silva et al. (Eds.), Guimarães, pp. II-345-II-354, November 24-25, 2011.

(Portuguese)

9. Natário, P.; Silvestre, N.; Camotim, D.: "Towards the Application of the Direct Strength Method to the Design

of Beams Against Web Crippling", Proceedings of the VIII Congress on Steel and Composite Construction

(CMM VIII), L. Silva et al. (Eds.), Guimarães, pp. II-437-II-446, November 24-25, 2011. (Portuguese)

10. Dias-da-Costa, D.; Veludo, J.; Alfaiate, J.; Júlio, E.: "Simulação de Fissuração Radial Utilizando Elementos

Enriquecidos”, Congresso de Métodos Numéricos em Engenharia - CMNE 2011, FCTUC, Coimbra, 14-17

June 2011.


A.1 Entire books

A.2 Chapters

A.3 As editor

1. Camotim, D.; Zandonini, R.: Guest Editors of a special issue of Advanced Steel Construction An

International Journal (V. 7, n.º 1, 2011), devoted to the "Sixth International Conference on Advances in Steel

Structures 2009", March 2011.


__________________________________________________________________________________________

63


1. Camotim, D.: "Guidelines for the Use of Direct Second-Order Inelastic Analysis in Steel Frame Design",

Report of the Special Project Committee on Advanced Analysis, Technical Committee on Compression and

Flexural Members (Technical Administrative Committee on Metals), Surovek, A. (Ed.), Structural

Engineering Institute (SEI), American Society of Civil Engineers (ASCE), August 2011.


1. Camotim, D.; Silvestre, N.; Correia, J.R.: "Sistema Estrutural TRUSSKIT", cliente BarraFerros, Relatório ICIST

EP n.º 13/2011, Relatório FUNDEC PS n.º 11/2011, 2011.




E. B. Pires International Journal for Computational Vision and Biomechanics

V. Leitão Engineering Analysis with Boundary Elements

N. Silvestre Thin-Walled Structures (Elsevier)

N. Silvestre International Journal of Vehicle Structures and Systems (Mechaero)

N. Silvestre International Journal of Mechanics and Applications (Scientific & Academic

Publishing)

D. Camotim Journal of Engineering Mechanics, ASCE (Associate Editor).

D. Camotim IES Journal A: Civil and Structural Engineering (Institution of Engineers,

Singapore)

D. Camotim Revista Sul-Americana de Engenharia Estrutural (Associação Sul-Americana de

Engenharia Estrutural)

D. Camotim Advanced Steel Construction - an International Journal (Hong Kong Steel

Institute)

D. Camotim International Journal of Structural Stability and Dynamics (World Scientific)

D. Camotim Steel & Composite Structures (Techno-Press)

D. Camotim Thin-Walled Structures (Elsevier)

J.A.T. Freitas Finite Elements in Analysis and Design

J.A.T. Freitas The Latin American Journal of Solids and Structures



http://www.lajss.org/HistoricalArticles/TheLatinAmericanJournal.pdf


__________________________________________________________________________________________

64



E. B. Pires 2nd

ECCOMAS Thematic Conference on Tissue Engineering, Lisbon, 2011

Member of Scientific Committee

E. B. Pires III ECCOMAS Thematic Conference on Computational Vision and Medical Image Processing (VipIMAGE 2011), Olhão, Algarve, 2011


E. B. Pires 10º Congresso Ibero-Americano em Engenharia Mecânica (CIBEM10), Porto, 2011


E. B. Pires 3rd CompIMAGE Conference – Computational Modeling of Objects Presented in Images: Fundamentals, Methods and Applications, Rome, Italy, 2012


J. Alfaiate CoRAN 2011: International Conference on Recent Advances in Nonlinear Models - Structural Concrete Applications


J. Alfaiate CFRAC 2011: International Conference on Computational Modeling of Fracture and Failure of Materials and Structures

Advisory Scientific Committee

V. Leitão 34th

International Conference on Boundary Elements and other Mesh Reduction Methods, Split, Croatia

International Scientific Advisory Committee

L.M.S. Castro XIII International Conference on Civil, Structural and Environmental Engineering Computing (Chania-Greece, 6-9 September 2011)

Member of Editorial Board

L.M.S. Castro Meshless in Science and Engineering - An International Conference (Porto, 30 July – 1 August 2012)


N. Silvestre 1st International Conference on

Advances in Vehicle Structures &

Systems (ICAVSS’11), Chennai,

March 2011


N. Silvestre 7th International Conference on Steel

and Aluminium Structures (ICSAS

2011), Kuching, July 2011


N. Silvestre 1st European Community on

Computational Methods in Applied

Sciences (ECCOMAS) Young

Investigators Conference (YIC2012),

Aveiro, April 2012


N. Silvestre 6th International Conference on

Coupled Instabilities in Metal

Structures (CIMS 2012), Strathclyde



__________________________________________________________________________________________

65

University, UK, December 2012

D. Camotim, Nuno Silvestre 6th International Conference on Steel

and Aluminium Structures –

ICSAS’11, Sarawak, July 2011


D. Camotim, N. Silvestre 6th International Conference on Thin-

Walled Structures – ICTWS’11,

Timisoara, September 2011


D. Camotim 6th European Conference on Steel

and Composite Structures

EUROSTEEL 2011, Budapest,

August/September 2011


D. Camotim 13th International Conference on Civil,

Structural and Environmental

Engineering Computing CC 2011,

Chania, September 2011


D. Camotim 2011 International Conference on

Steel and Composite Structures

Seoul, September 2011


J.A.T. Freitas Computer Methods in Mechanics

(CMM-2011)



Researcher Scientific Committees – National


E. B. Pires, F.M.F. Simões 4th National Congress of Biomechanics, Coimbra, Portugal, 2011


L.M.S. Castro 1º Congresso Luso-Brasileiro de Materiais Compósitos (Lisbon, 23-25 July 2012)


E. B. Pires Congresso de Métodos Numéricos em Engenharia - CMNE 2011, Coimbra, 2011


N. Silvestre VIII Congresso de Construção Metálica e Mista (CMM-VIII), Guimarães, November 2011


N. Silvestre VIII Congresso de Construção Metálica e Mista (CMM-VIII), Guimarães, November 2011

Member of Executive Committee

N. Silvestre 2º Encontro Nacional de Materiais e

Estruturas Compósitas Porto, May 2012




__________________________________________________________________________________________

66

Researcher Drafting of Recommendations and Codes – International


N. Silvestre European Committee for

Standardization (CEN) - Technical

Committee 135

National representative of

CEN/TC135 on Execution of Steel

Structures and Aluminium Structures

(EN 1090)

D. Camotim, N. Silvestre European Convention for

Constructional Steel Work (ECCS)

Member of Technical Committee 7

(Cold-Formed Steel Construction)

D. Camotim, N. Silvestre European Convention for


Member of Task Working Group 7.5

(Practical Improvement of Design

Guidelines)

D. Camotim European Convention for


Member of Technical Committee 8

(Stability)

D. Camotim European Convention for


Member of Task Working Group 8.3

(Plate Buckling)

D. Camotim SSRC (Structural Stability Research

Council)

Member of Executive Committee

since April 2008




N. Silvestre Technical Committee of Normalization

CT182

Coordinator of Working Group 1 on

Execution of Steel and Aluminum

Structures EN 1090

N. Silvestre Technical Committee of Portuguese

Association for Steel and Composite

Construction (CMM)

Coordinator of Working Group on

Marking of Cold-Formed Steel

Structures and Systems

D. Camotim Technical Committee of Normalization

CT115

Member of the Working Group

associated with Eurocode 3

D. Camotim Technical Committee of Normalization

CT115

Member of the Working Group

associated with Eurocode 4




Event Notes

E. B. Pires, F.M.F. Simões 18th Congress of the European Society

of Biomechanics (ESB2012), Lisbon,

Member of the Organizing

Committee


__________________________________________________________________________________________

67

July 1-4, 2012

J. Alfaiate Mini-Symposium entitled "Enriched

finite element formulations to capture

cracks, material interfaces and

multiscale phenomena", in CFRAC-

2011, Barcelona


Committee

N. Silvestre 1st International Conference on

Mechanics of Nano, Micro and Macro

Composite Structures, Turino, June

2012

Organiser of two Mini-Symposia

N. Silvestre 8th

European Solid Mechanics Conference (ESMC – EUROMECH), July 2012

Organiser of a Mini-Symposium

N. Silvestre Congresso de Métodos Numéricos em Engenharia (CMNE 2011) Coimbra, June 2011


D. Camotim 2011 ASCE Engineering Mechanics Institute Conference (EMI 2011), Boston, June, 2011


D. Camotim Seventh International Conference on Steel and Aluminium Structures (ICSAS 2011), Kuching, July 13-15, 2011.

Member of the Organizing Committee

D. Camotim Sixth International Conference on Steel

and Composite Structures (Eurosteel

2011), Budapest, August 31 to

September 2, 2011.


Committee

D. Camotim Sixth International Conference on Thin-

Walled Structures – Recent Research

Advances and Trends (ICTWS 2011),

Timisoara, September 5-7, 2011.


Committee

D. Camotim Thirteenth International Conference on

Civil, Structural and Environmental

Engineering Computing (CC 2011),

Chania (Crete), September 6-9, 2011


Committee

D. Camotim The 2011 International Conference on


(ICSCS’11), Seoul, September 18-22,

2011.


Committee

D. Camotim Congresso de Métodos Numéricos em

Engenharia (CMNE 2011), Coimbra,

June 14-17, 2011.


Committee


A.2 National events

Researcher Organisation of scientific events – National

Event Notes


__________________________________________________________________________________________

68

D. Camotim VIII Congresso de Construção Metálica e Mista (CMM VIII), Guimarães, November 24-25, 2011

Member of Organizing Committee

N. Silvestre IX Congresso de Construção Metálica e Mista (CMM-IX), Lisboa, November 2013

Chairman of Organizing Committee

N. Silvestre Congresso de Métodos Numéricos em Engenharia (SEMNI/APMTAC), Bilbau, June 2013


N. Silvestre Congresso de Métodos Numéricos em Engenharia (APMTAC/SEMNI), Lisboa, June 2015





Date

A. Pinto da Costa EUROMECH Colloquium 516, Nonsmooth Contact and Impact Laws in Mechanics.

Grenoble, France

July 6-8, 2011

C. Tiago, J.P. Moitinho de Almeida

V International Conference on Adaptive Modeling and Simulation (ADMOS)

Paris, France June 6-8, 2011

P. Areias, E. B. Pires, J. Alfaiate, L.M.S. Castro

International Conference on Computational Modeling of Fracture and Failure of Materials and Structures (CFRAC 2011)

Barcelona, Spain

June 6-8, 2011

J. Alfaiate Complas XI Barcelona, Spain

September 7-9, 2011

J. Alfaiate, L.M.S. Castro CoRAN 2011: International Conference on Recent Advances in Nonlinear Models - Structural Concrete Applications

Coimbra, Portugal

November 24-25, 2011

N. Silvestre 16th International Conference on Composite Structures (ICCS 16)

Porto, Portugal June 2011

D. Camotim, N. Silvestre 6th International Conference on Thin-Walled Structures (TWST 2011)

Timisoara, Romania

September 2011

D. Camotim, N. Silvestre 7th International Conference on Steel and Aluminium Structures (ICSAS 2011)

Kuching, Malasia

July 2011

D. Camotim Structural Stability Research Council (SSRC) Annual Stability Conference

Pittsburgh, USA

May10-13, 2011

D. Camotim 2011 ASCE Engineering Mechanics Institute Conference (EMI 2011)

Boston, USA June 2-4, 2011

D. Camotim Sixth International Conference on Steel and Composite Structures (Eurosteel 2011)

Budapest, Hungary

August 31 to September 2, 2011

D. Camotim 2011 International Conference on Steel and Composite Structures (ICSCS’11)

Seoul, Korea September 2011


__________________________________________________________________________________________

69

J. Alfaiate, JP Moitinho de Almeida, Luís Castro, D. Camotim, N. Silvestre, P. B. Dinis, J.A.T. Freitas, C.T. Pham

Congresso de Métodos Numéricos em Engenharia (CMNE 2011), Coimbra, 2011

Coimbra, Portugal

June 2011

C.D. Toan Computer Methods in Mechanics, Warsaw, Poland

9-12 May 2011

A.H. Jesus Computer Methods in Mechanics, Warsaw, Poland

9-12 May 2011

A.2 National Events


E. B. Pires, F.M.F. Simões 4th National Congress of Biomechanics Coimbra February, 2011

D. Camotim, N. Silvestre, P. B. Dinis

VIII Congresso de Construção Metálica e Mista (CMM-VIII)

Guimarães November 2011

N. Silvestre Reunião Anual da Comissão Técnica 182 (Execução de Estruturas Metálicas) do IPQ

Coimbra December 2011



Date

C. Tiago V Encontro Sobre Pesquisas de Doutorado da Área de Engenharia de Estruturas

São Carlos, Brazil

October 20-21, 2011

C. Tiago 10th Workshop on Numerical Methods in Applied Science and Engineering

Barcelona, Spain

January 20-21, 2011

N. Silvestre CEN (European Committee for Standardization) Annual Meeting of Technical Committee 135 – Execution of Steel Structures

Oslo, Sweden September 2011





E.B. Pires, F.M.F. Simões: Acções integradas luso-espanholas – ACÇÃO N.º E-93/10: Simulação numérica da

regeneração óssea: modelos matemáticos de optimização (members of the research team).

JP Moitinho de Almeida, O. Pereira, C. Tiago: Continuation of the joint research in the context of Project

Maaximus "More Affordable Aircraft through eXtended, Integrated and Mature nUmerical Sizing".

JP Moitinho de Almeida, C. Tiago, O. Pereira: ATCoME - Advanced Techniques in Computational Mechanics


__________________________________________________________________________________________

70

(2009-2013) Marie Curie.

V. Leitão: Project PIRSES-GA-2009-246977 (FP7-PEOPLE-2009-IRSES) - "NUMSIM - Numerical simulation

in technical sciences". Joint Project with TUGraz (coordination), UFRJ-COPPE (Brazil), UNMdP (Argentina),

PUC-Rio (Brazil), UBrunel (UK), USP (Brazil), PCC (Chile), IPPT (Poland), CIMEC (Argentina).

D. Camotim, N. Silvestre, P B. Dinis, C Basaglia: International Research and Cooperation Project FCT

(Portugal) / CAPES (Brasil): "Análise numérica e experimental de elementos estruturais de parede fina"


N. Silvestre: Project "Recycling & Seismic Protection: Sustainable High Performance CFST Columns for

Seismic Areas", submitted for funding by FCT through research program PTDC/ECM/117774/2010

N. Silvestre, D. Camotim: Project "CoPurFire - Fire resistance of cold-formed steel purlins", submitted for

funding by FCT through research program PTDC/ECM/121066/2010


N. Silvestre: Project "Recycling & Seismic Protection: Sustainable High Performance CFST Columns for

Seismic Areas", submitted for funding by FCT through research program PTDC/ECM/117774/2010


L.M.S. Castro: Project "Modelos de dano e de fractura para a análise de estruturas de betão"

(PTDC/ECM/71519/2006) (concluded in December 2011).

J.A.T. Freitas: FCT research project "Hybrid-Trefftz Finite Element Modelling" (PTDC/ECM/70781/2006)

N. Silvestre, D. Camotim, P. B. Dinis: Project " Modelling and Analysis of Nano-Structures: Carbon

Nanotubes and Nano-Composite Materials", funded by FCT through research program

PTDC/ECM/103490/2008

D. Camotim, N. Silvestre, P. B. Dinis, C. Basaglia: Project "Generalized Beam Theory (GBT) –

Development, Application and Dissemination", funded by FCT through research program

PTDC/ECM/108146/2008

E. Júlio, J. Alfaiate: Project "Super Pele Inteligente – Durabilidade Melhorada para Elementos de Betão",

funded by FCT through research program PTDC/ECM/098497/2008

E. Júlio, J. Alfaiate: Project "MesoCrete - Comportamento do Betão na Meso-Escala", funded by FCT

through research program PTDC/ECM/119214/2010

J. Correia, J. Alfaiate: Project "Protecção ao Fogo de Elementos Estruturais de Betão Armado Reforçados

com Sistemas Compósitos de CFRP – CARBOFIRE", funded by FCT through research program

PTDC/ECM/118271/2010

Pedro Alexandre Simões Martins Natário – Doctoral scholarship of FCT (N. Silvestre, D. Camotim)

Miguel da Silva Abambres – Doctoral scholarship of FCT (N. Silvestre, D. Camotim)


__________________________________________________________________________________________

71

Júlio Balsa Pargana – Doctoral scholarship of FCT (J.A.T. Freitas)

Mário José Loureiro de Figueiredo e Sá – Doctoral scholarship of FCT (A. Gomes, N. Silvestre, J. Correia)




Organization Date

A. Pinto da Costa Cooperation with Prof. Lars-Erik Andersson on frictional contact problems.

Linköping University

May 28 to June 5

A. Pinto da Costa Research visit to ICIST/IST of Prof. Lars-Erik Andersson

Linköping University

November 13 to 19

F.M.F. Simões Research visit to Prof. Benjamim Loret (INPG, France) to ICIST/IST for joint work with Prof. Fernando Simões

Institute National Polytechnique de Grenoble, France

January 2011

F.M.F. Simões Research visit to Institute National Polytechnique de Grenoble, France, for joint work with Prof. Benjamim Loret

Institute National Polytechnique de Grenoble, France

September 2011

J. Alfaiate Cooperation with L. J. Sluys, head of Computaionl Mechanics in Civil Eng., TuDelft, The Netherlands, on enriched formulations/ methods to model fracture

Computaional Mechanics /Civil Eng, TuDelft, The Netherlands

February 2011

N. Silvestre, D. Camotim Joint research with Prof. Jeppe Jonson in the context of new beam theory formulations

DTU – Technical University of Denmark

2011

D. Camotim, N. Silvestre, P. B. Dinis

Joint research with Prof. Ben Young The University of Hong Kong (China)

2011

N. Silvestre Joint research with Dr. Attila Joo in the context of GBT spectral analysis

Budapest University of Technology and Economics, Hungary

2011

N. Silvestre Joint research with Dr. Leroy Gardner in the context of analysis and design for Elliptical Hollow Sections

Imperial College London, UK

2011

N. Silvestre Joint research with Prof. Chien Ming Wang in the context of numerical analysis of Carbon Nanotubes

National University of Singapore

2011

N. Silvestre Joint research with Dr. Yanguan Zhang in the context of dynamics simulations of Carbon Nanotubes

Fuzhou University, China

2011

N. Silvestre Joint research with Prof. Yang Xiang in the context of numerical analysis of Carbon Nanotubes

University of Western Sydney, Australia

2011

D. Camotim, P. B. Dinis, Joint research with Prof. Eduardo Batista in the context of interactive buckling

Federal University of Rio de Janeiro,

2011


__________________________________________________________________________________________

72

N. Silvestre behaviour of cold-formed steel columns Brazil

N. Silvestre Joint Organization with Prof. Konstatinos Tserpes of a Mini-Symposium on "Multi-scale Modeling of Graphene- and Carbon Nanotube-Reinforced Composites

University of Patras, Greece

2011

N. Silvestre Joint Organization with Dr. Marco Petrolo of a Mini-Symposium on "Advanced Structural Models for Thin-Walled Structures and Slender Bodies"

Politecnico di Torino, Italy

2011

N. Silvestre Joint Organization with Dr. Leroy G of a Mini-Symposium on "Stability and Non-Linear Behaviour of Steel Structures"

Imperial College, UK

2011

J.A.T. Freitas Joint research with Prof. Neville Fowkes in the context of Trefftz modelling of filled cracks (Project on Hybrid-Trefftz Finite Element Modelling)

University of Western Australia, Australia

July 2011

D. Camotim Joint research with Prof. Noël Challamel INSA de Rennes, France

2011

D. Camotim Joint research with Prof. Alexandre Landesmann in the context of the buckling, post-buckling and strength behaviour of cold-formed steel columns under fire conditions

Federal University of Rio de Janeiro, Brazil

2011

D. Camotim Joint Guest-Editorship with Prof. Riccardo Zandonini of a Special Issue of Advanced

Steel Construction An International Journal

University of Trento, Italy

2011

D. Camotim Joint Guest-Editorship with Prof. Miroslav Skaloud of a Special Issue of the International Journal of Structural Stability and Dynamics

Czech Academy of Sciences, Prague, Czech Republic

2011



Organization Date

F.M.F. Simões, E. B. Pires Joint research with Dr. Paulo Rego Faculdade de Medicina/ Universidade de Lisboa

2011

O. Pereira Joint research with Dr.Maria Sofia Ribeiro LNEC Oct. 2011

L.M.S. Castro Joint research with Prof. António Ferreira Faculdade de Engenharia da Universidade do Porto

2011

N. Silvestre Molecular Dynamics Simulations of Carbon Nanotubos, with Prof. J. N. Canongia Lopes

IST - Dept. of Chemical Engineering

2011

N. Silvestre Non-Linear Monotonic and Cyclic Behaviour of Cold-Formed Steel Members and Frames, with Dr. Aldina Santiago

FCTUC – Dept. of Civil Engineering

2011


__________________________________________________________________________________________

73

N. Silvestre Recycling & Seismic Protection: Sustainable High Performance CFST Columns for Seismic Areas, with Dr. Miguel Castro

University of Porto (FEUP)

2011

N. Silvestre Structural Design in Light Steel Framing, with Mr. António Santos

Gestedi S.A. 2011

J.A.T. Freitas Modelling of the dynamic response of soils (Project on Hybrid-Trefftz Finite Element Modelling), with Ionut Dragos Moldovan

Universidade Católica Portuguesa

2011

J.A.T. Freitas Modelling of the thermal response of early age concrete ( Project on Hybrid-Trefftz Finite Element Modelling), with Rui Faria

Universidade do Porto

2011

J.A.T. Freitas Adaptive refinement with Trefftz elements (Project on Hybrid-Trefftz Finite Element Modelling), with Ildi Cismasiu

Universidade Nova de Lisboa

2011

D. Camotim Joint research with Prof. Rodrigo Gonçalves

Universidade Nova de Lisboa

2011

D. Camotim Joint research with Prof. Paulo Providência and Mr. Anísio Andrade

University of Coimbra

2011

D. Camotim Structural Behaviour and Design of Telescopic Steel Props with Dr. António Baptista and Mr. João André

LNEC – National Laboratory of Civil Engineering

2011



J. Alfaiate The effect of the infill in arched structures – Group 1: António S. Gago, António R.G. Lamas

2011

J. Alfaiate Modelling of cohesive fracture of concrete – Group 4: Eduardo Júlio

2011

D. Camotim, N. Silvestre Structural Behaviour of GFRP Beams Strengthened with CFRP Sheets – Group 3: João Correia, Fernando Branco

2011

N. Silvestre Structural Behaviour of FRP Pultruded Footbridges – Group 3: Augusto Gomes, João Correia

2011

N. Silvestre Stability Analysis and Design of Elliptical Hollow Sections Using Artificial Neural Networks – Group 5: Joaquim Dias

2011


A.1 Internacional

A.2 National



__________________________________________________________________________________________

74



N. Silvestre Scientific Award UTL/Santander Totta 2010, given by the Technical University of Lisbon in the scientific area of "Civil Engineering, Mechanical Engineering, Naval Engineering, Mining and Geological Engineering, Aerospace Engineering, Territorial Engineering, Transportation, Biomechanics"

Technical University of Lisbon/Santander Totta

D. Camotim Honour Diploma awarded by Reitoria da Universidade Técnica de Lisboa

Technical University of Lisbon

D. Camotim Honour Diploma concerning the UTL/Santander Totta Scientific Award 2010, awarded by the Technical University of Lisbon in the scientific area of "Civil Engineering, Mechanical Engineering, Naval Engineering, Mining and Geological Engineering, Aerospace Engineering, Territorial Engineering, Transportation, Biomechanics"

Technical University of Lisbon/Santander Totta



A. Pinto da Costa Revision of 1 paper for Asia-Pacific Journal of Operational Research

A. Pinto da Costa Revision of 1 paper for Applied Mechanics Reviews - ASME

A. Pinto da Costa Revision of 1 paper for Computer Methods in Applied Mechanics and Engineering

A. Pinto da Costa Revision of 1 paper for Engineering Structures

A. Pinto da Costa Revision of 1 paper for Optimization and Engineering

C. Tiago Revision of 1 paper for the Sadhana - Academy Proceedings in Engineering Science

C. Tiago Revision of 1 paper for the Engineering Analysis with Boundary Elements

E. B. Pires Revision of 1 paper for Computer Methods in Applied Mechanics and Engineering

E. B. Pires Revision of 1 paper for International Journal for Computational Vision and Biomechanics

F.M.F. Simões Revision of 3 papers for the journal Mechanics of Materials

J. Alfaiate Revision of 3 papers for Engineering Fracture Mechanics

J. Alfaiate Revision of 1 paper for Computer Methods in Applied Mechanics and Engineering

J. Alfaiate Revision of 1 paper for International Journal of Solids and Structures

J.P. Moitinho de Almeida

Review of 2 papers for Computer Methods in Applied Mechanics and Engineering


Review of 1 paper for International Journal of Non-Linear Mechanics

V. Leitão Review of 1 paper for Engineering Analysis with Boundary Elements

V. Leitão Review of 2 paper forInternational Journal of Computational Methods

V. Leitão Review of 2 paper forInternational Journal for Numerical Methods in Engineering


__________________________________________________________________________________________

75

V. Leitão Review of 1 paper for Archives of Applied Mechanics

V. Leitão Review of 1 paper for Numerical Methods for Partial Differential Equations

L.M.S. Castro Review of 1 paper for Computers & Structures

L.M.S. Castro Review of 1 paper for Finite Elements in Analysis and Design

N. Silvestre Review of 1 paper for International Journal of Mechanical Sciences

N. Silvestre Review of 1 paper for International Journal of Solids and Structures

N. Silvestre Review of 2 paper for Journal of Structural Engineering (ASCE)

N. Silvestre Review of 3 paper for Thin-Walled Structures

N. Silvestre Review of 2 paper for International Journal of Structural Stability and Dynamics

N. Silvestre Review of 4 paper for Composite Structures

N. Silvestre Review of 1 paper for Engineering Structures

N. Silvestre Review of 2 paper for Computers & Structures

D. Camotim Review of 1 paper for International Journal of Mechanical Sciences (Elsevier)

D. Camotim Review of 1 paper for International Journal of Solids and Structures (Elsevier)

D. Camotim Review of 2 paper for Journal of Engineering Mechanics (American Society of Civil Engineers - ASCE)

D. Camotim Review of 2 paper for Journal of Structural Engineering (American Society of Civil Engineers - ASCE)

D. Camotim Review of 2 paper for Thin-Walled Structures (Elsevier)

D. Camotim Review of 1 paper for International Journal of Structural Stability and Dynamics (World Scientific)

D. Camotim Review of 1 paper for Journal of Constructional Steel Research (Elsevier)

D. Camotim Review of 2 paper for Computers & Structures (Elsevier)

D. Camotim Review of 1 paper for Advanced Steel Construction (Hong Kong Steel Institute)

J.A.T. Freitas Review of 1 paper for Computer Methods in Applied Mechanics and Engineering

J.A.T. Freitas Review of 1 paper for Computational Mechanics

J.A.T. Freitas Review of 1 paper for Engineering Analysis with Boundary Elements

J.A.T. Freitas Review of 1 paper for Journal of Sound and Vibration





Remote evaluation of projects and grant applications FNRS (Belgium)



__________________________________________________________________________________________

76


J.A.T. Freitas Keynote, Computer Methods in Mechanics Warsaw, Poland, 9-12 May




D. Camotim "Comportamento Material e Regulamentação" one unit of the course on "Projecto de Estruturas em Aço Leve"

Portuguese Association of Construction Steelwork (CMM)

Lisboa/Feb. 2011

N. Silvestre Advanced Course on "Design of Cold-Formed Steel Structures" (2nd Edition)


Lisboa/Feb. 2011

N. Silvestre Advanced Course on "Design of Steel Structures" (1st Edition)


Lisboa/Oct. 2011

D. Camotim Course on "Projecto de Edifícios em Estrutura Metálica"

FUNDEC / CENOR (Lisboa)

Lisboa/Nov. 2011

N. Silvestre Advanced Course on "Design of Light Steel Frame (LSF) Structures" (1st Edition)


Lisboa/Nov.-Dec. 2011

II.18 Models


MPC SIMPLAS: Multiple point constraints using a clique processor (Fortran 2003) google code

(http://code.google.com/p/simplasmpc/) at http://code.google.com/p/simplasmpc/downloads/list (P. Areias)

II.20 Pilot plants

II.21 Prototypes

II.22 Patents

TRUSSKIT Structural System, Submitted to INPI (Instituto Nacional da Propriedade Industrial) by BarraFerros

with the technical support of D. Camotim and N. Silvestre, 2011.


__________________________________________________________________________________________

77

II.23 Miscellaneous

A. Pinto da Costa – Director of the "Laboratório de Mecânica Computacional" of DECivil.

E.B. Pires – Editorial Coordinator of the Series "Proceedings of Conferences" of IST Press.

E.B. Pires – Secretary of the General Assembly of the Portuguese Society of Biomedical Engineering

(SPEB).

E.B. Pires – Secretary of the General Assembly of the Portuguese Society of Biomechanics.

E.B. Pires – Activities, as guest editor, related to the edition of a special issue of Computer Methods in

Applied Mechanics and Engineering on Advances in Computational Methods in Contact Mechanics devoted

to the memory of Prof. João Martins (together with Profs. Michel Raous, Manuel Marques, Peter Wriggers

and Tod Laursen).

N. Silvestre – Member of the Board of the Portuguese Association of Steel and Composite Construction

(CMM).

N. Silvestre – Vice-President of ICIST (Instituto de Engenharia de Estruturas, Território e Construção).

D. Camotim – Member of "Senado da Universidade Técnica de Lisboa" since January 2009.

D. Camotim – Member of "Conselho Científico do Instituto Superior Técnico" since June 2009.

D. Camotim – Member of the Board of the Portuguese Association of Steel and Composite Construction

(CMM) since 1997 until April 2011 (Founding Member).

D. Camotim – Secretary of the General Assembly of the Portuguese Association of Steel and Composite

Construction (CMM), since April 2011

D. Camotim – Member of the Board of the Portuguese Association of Applied, Theoretical and

Computational Mechanics (APMATC) since 2008.

D. Camotim – Representative of the Portuguese Association of Applied, Theoretical and Computational

Mechanics (APMATC) in the General Assembly of the International Union of Theoretical and Applied

Mechanics (IUTAM) since 2008.

D. Camotim – Member of the Board of the Portuguese Association for Education in Engineering (SPEE)

since 2011 (Founding Member).

D. Camotim – Member of the "Executive Committee" of the Structural Stability Research Council (SSRC)

since 2008.

D. Camotim – Invited by the Faculty of Civil Engineering of the Technical University ("Politehnica") of

Timisoara (Romania) to be the External Examiner in the Ph.D. Thesis defense of Mr. Nicolae Andrei Crisan.

D. Camotim – Invited by the Polytech’Clermont-Ferrand University (France) to be the "Membre du Comité de

Doctorat" of the Ph.D. Thesis ("doctorat") defense of Mr. Sébastien Durif.

D. Camotim – Invited by the "Departamento de Engenharia Civil" of the Escola de Minas da Universidade

Federal de Ouro Preto (Brazil) to be the member of "Qualifying Committee" of the Ph.D. Student Andréa

Gonçalves Rodrigues das Dôres.

ICIST - Instituto de Engenharia de Estruturas, Território e Construção Group 3 -SC

__________________________________________________________________________________________

78

RESEARCH GROUP – STUDIES ON CONSTRUCTION

RESEARCH GROUP CO-ORDINATOR – PROF. FERNANDO

BRANCO


I.1 Budget

BUDGET (euros)

FCT Other Funding

STRATEGIC PROJECT

FCT

Projects

Int. R&D

Projects

Other research

grants Consultancy Total

25.994,89 90.973,5 0,00 0,00 61.532,96 178.501,35

I.2 Personnel

PERSONNEL


Eligible Permanent Non-permanent


Phd researchers

Albano Luís Rebelo Silva Neves

Sousa

Assistant

Professor X

Ana Paula Teixeira Ferreira Pinto

França de Santana

Assistant

Professor X

António Heleno Domingues Moret

Rodrigues

Associate

Professor X X

António Manuel de Sousa Baltazar

Mortal

Assistant

Professor X

Augusto Martins Gomes Associate

Professor X X

Fernando António Batista Branco

Full Professor

with

Aggregation

X X

Francisco José Loforte Teixeira

Ribeiro

Associate

Professor X

ICIST - Instituto de Engenharia de Estruturas, Território e Construção Group 3 - SC

__________________________________________________________________________________________

79

PERSONNEL




Inês Flores-Colen Assistant

Professor X X

João Paulo Janeiro Gomes Ferreira Associate

Professor X X

João Pedro Ramôa Ribeiro Correia Assistant

Professor X X

Joaquim Conceição Valente Assistant

Professor X

Jorge Manuel Caliço Lopes de Brito

Full Professor

with

Aggregation

X X

Luís Manuel Alves Dias Associate

Professor X

Luís Filipe Moreira Mendes Assistant

Professor X

Maria Cristina Matos Silva Assistant

Professor X

Pedro Miguel Dias Vaz Paulo Assistant

Professor X X

Pedro Gameiro Henriques Assistant

Professor X

Maria da Glória de Almeida Gomes Assistant

Professor X X

André Daniel Vital da Silva Coelho Post-Doc

Researcher X

António José Damas da Costa

Lobato dos Santos

Assistant

Professor X

Ecem Edis Post-Doc

Researcher X

Maria Dulce Henriques Assistant

Professor X

Maria Goreti Lopes Margalha Assistant

Professor X

Nabajyoti Saikia Post-Doc

Researcher X X

Pedro Manuel Lima Gaspar Assistant

Professor X


__________________________________________________________________________________________

80

PERSONNEL




Florindo Gaspar Assistant

Professor X

Resende Nsambu Assistant

Professor X

MSc Researchers

Alberto Martins Pereira da Silva

Guest

Associate

Professor

X

Joaquim Ferreira Research

Assistant X

António João Marques Lima Research

Assistant X

José Alexandre de Brito Aleixo

Bogas

Research

Assistant X

Luís Manuel Rocha Evangelista Assistant

Professor X

Margarida Santos Assistant

Professor X

Miguel Bravo Research

Assistant X

Miguel Filipe Barreto dos Santos Assistant

Professor X

Pedro Miguel Soares da Silva Assistant

Professor X

Rui Duarte Neves Assistant

Professor X

Teresa Freire Assistant

Professor X

José Dinis Silvestre Research

Assistant X

Maria Elvira Telles de Menezes Research

Assistant X

Ana Ferreira Research

Assistant X

Ana Silva Research

Assistant X


__________________________________________________________________________________________

81

PERSONNEL




Nuno Gouveia de Almeida Research

Assistant X

Nuno Gonçalo Cordeiro Marques de

Almeida

Research

Assistant X

Rita Maria Vilela Nogueira Research

Assistant X

Rui Alberto Martins Isidoro Research

Assistant X

Vítor Faria e Sousa Research

Assistant X

Fernando Rodrigues Research

Assistant X

Ana Maria Neves Gonçalves Research

Assistant X

João Alexandre Medeiros Tavares

Guerreiro

Research

Assistant X

José de Almeida Gonilha Research

Assistant X

João Pedro Laje da Costa Firmo Research

Assistant X

Mário Alexandre de Jesus Garrido Research

Assistant X

Luís Guilherme da Cunha Seixas

Valarinho

Research

Assistant X

Mário Figueiredo e Sá Research

Assistant X

Marco Morgado Gomes Research

Assistant X

Paulo Cebola Luz Research

Assistant X

Filipe Osório Research

Assistant X


Fernando Rodrigues Research

Assistant X

Technical staff


__________________________________________________________________________________________

82

PERSONNEL





Alexandra Baixo

Conceição Melo

Maria Helena Salvado

PERSONNEL - RESUME



PhD researchers 18 1 7 26

MSc researchers 6 11 15 32

Graduate 0 1 0 1

Technical staff


Others

Leadership

The Group of Studies on Construction has a co-ordinator (in 2011, Prof. Fernando Branco) and is organised in

four research domains, following the most representative research guidelines in which it is involved:

Construction Materials, Technology and Management Innovation;

Sustainable Construction;

Monitoring, Rehabilitation and Conservation of the Built Heritage;

Fire Behaviour of Materials and Structures.


Facilities

Laboratory of Structures (LERM) and Laboratory of Construction (LC):

one climatic chamber where tests over full-size building elements can be done;

an accelerated carbonation oven;

one electric bottom-loading furnace and one three-zone split furnace, both electrically heated and

controlled by computer for fire resistance tests;


__________________________________________________________________________________________

83

one intermediate scale gas furnace controlled by computer for fire resistance tests;

data-loggers for data acquisition;

personal computers;

sensors such as displacement transducers, load cells, strain gauges, temperature transducers,

pressure gauges, inclinometers, etc.;

load application systems including hydraulic jacks (up to 5.000 kN capacity), electronic, electric and

manual hydraulic pumps (shared with other Groups);

universal testing machine Instron (tension/compression tests, 250 kN capacity, 100 mm stroke)

(shared with other Groups);

press for compression tests (3.000 kN capacity) associated with press for bending tests;

reaction wall equipped with 1.000 kN screw jack (shared with other Groups);

steel reaction frames (shared with other Groups);

set for construction condition evaluation including Schmidt hammers, pendulum hammers, steel

bars detectors, phenolphthalein kit, chloride kit, crack microscope, crack rulers, infrared camera,

ultrasonic wave propagation velocity sensor;

workshop for metallic and timber parts fabrication (drills, saws, welding machines, etc.) (shared with

other Groups);

One B&K Building Acoustics system for laboratory and in-situ tests.

Solar Cooling Laboratory (LSAS). It is being used to test solar assisted absorption systems for building

climatization:

controlled (temperature and mass flow rate) hot and cooled water circuits, ventilation;

a modular single effect absorption machine which allows the testing of specific components;

hot and cold water circuits to run the machine;

a data acquisition system based on a digital multimeter and a rele bank;

personal computers;

measurement equipment such as PT100 sensors (4wire), pressure sensors and turbine and

electromagnetic flowmeters.

Laboratory of Computational Mechanics (LMC):

facilities in the use of computers and printers shared with other Groups.

The experiments are carried out by the individual members of the Group or by PhD or MSc students. Sometimes

the staff charged with maintenance of LERM and LC gives some help, but the Group does not dispose of

qualified experimental personnel to attend to all the research areas. When the global needs of the users of LERM

and LC coincide in a certain period of time, delays in the research progress have occurred in the past.

The maintenance and repair (or installation of new equipment) of equipment are normally done by staff from

LERM, LC or by specialised firms.



Academic research work Ph.D. theses Concluded 8 8



__________________________________________________________________________________________

84


In progress 82

Publications



26.33 29


8


International 8.5 9

National 2.67 3



National 16 17

Books

Entire 0 0

Chapters 0.5 1

As editor 0 0

Reports 6




International 8

National 2


International 18

National 7


International 10

National 13


International 6

National 2


National 17




Submitted 0

Awarded 0

In progress 0


Submitted 6

Awarded 4

In progress 8


National 19


__________________________________________________________________________________________

85


National 2






13

Models 0


Pilot plants 0

Prototypes 2

Patents 0



__________________________________________________________________________________________

86




The research activities aim at developing research projects in the following domains:

1. Construction Materials, Technology and Management Innovation: advanced materials (GFRP, CFRP,

GRC); waterproofing systems; concrete and mortars technology; construction quality, safety,

environmental and health management; virtual reality applications in construction;

2. Sustainable Construction: sustainability and deconstruction strategies; sustainable traditional materials;

demolition and recycling; recycled aggregates; building physics and passive design; building

acclimatization and mechanical systems;

3. Monitoring, Rehabilitation and Conservation of the Built Heritage: Inspection, diagnosis, maintenance

and rehabilitation systems; maintenance of buildings envelope; conservation of historical building

heritage; sensors, technological innovation and structural assessment;

4. Fire Design: fire resistance and risk evaluation of cultural heritage.

Other objectives are:

to participate in national and international committees;

to participate / organize national and international conferences;

to teach in Graduation and Post-Graduation courses in the field of construction and participate in

academic events;

to perform consultancy work to partially fund research and provide practical applications to the results

of research.


Various research programs were completed or initiated during this period and will provide results in the near

future. The main fields of research are:

Innovative applications of materials such as GFRP, CFRP and GRC were studied in depth, experimentally

and analytically; most Portuguese research on waterproofing systems was performed within the group;

breakthroughs in concrete and mortars technology were experimentally validated; construction quality,

safety, environmental and health management related research was included in various national and

international actions, including normative work;

New theories on sustainability and construction were put forward, such as the use of traditional techniques

and materials (earth, wood, stone, brick), implementation of selective demolition and recycling maximization

(namely recycled aggregates in concrete and mortars production), and strategies of passive design and

acclimatization;

Life-cycle management systems (inspection, diagnosis, maintenance and rehabilitation); conservation of

historical building heritage (within various European research projects); other projects included sensors in

structures, technological innovation and assessment of complex structures; The summary of the main

achievements are indicated in the above table


__________________________________________________________________________________________

87

Projects awarded:

1. Project PTDC/ECM/1128372/2010 - FCT Grant - Betão com Agregados Reciclados de Elevado

Desempenho para a Indústria da Pré-Fabricação - EXELlentSUStainableCONcrete (High Performance

Recycled Aggregates Concrete for the Precasting Industry) (2012-2015) (IST coordinator: Jorge de Brito)

2. QREN 06/SI/2010 – REABET - Tomografia e Reabilitação de Estruturas de Betão Armado e Pré-esforçado

(Tomography and rehabilitation of concrete structures) (2011-2013) (Promoter: TD SA. IST coordinator:

Fernando Branco)

3. Project PTDC/ECM/118271/2010 - FCT Grant - Protecção ao Fogo de Elementos Estruturais de Betão

Armado Reforçados com Sistemas Compósitos de CFRP – CARBOFIRE (Fire Protection of Reinforced

Concrete Structural Elements Strengthened with CFRP Composite Systems) (2012-2015) (IST coordinator:

João Ramôa Correia)

4. PTDC/ECM/118262/2010 – FCT Grant - NANORENDER - Desempenho de argamassas de revestimento

com nanoaerogéis de sílica - NANORENDER - Performance of silica nanoaerogel-based renders (2012-

2015) (IST coordinator: Inês Flores-Colen)

Awards:

Jorge de Brito - Prémio Científico UTL/Santander Totta, na área científica de “Engenharia Civil, Engenharia

Mecânica, Engenharia Naval, Engenharia Geológica e Mineira, Engenharia Aeroespacial (Aeronave),

Engenharia do Território, Transportes e Biomecânica”, 2011.

José Dinis Silvestre – Honour Diploma concerning the UTL/Deloitte Young Researcher Award 2011, given

by the Technical University of Lisbon in the scientific area of “Civil Engineering, Mechanical Engineering,

Naval Engineering, Mining and Geological Engineering, Aerospace Engineering, Territorial Engineering,

Transportation, Biomechanics”.

Miguel Bravo and Jorge de Brito - 1º Prémio Inovação Valorpneu pelo trabalho “Betão com Borracha

Proveniente de Pneus Usados, 2011.

Best student paper award, Annual Conference of The International Emergency Management Society -

TIEMS 2011, paper entitled “Seismic Risk Management of Civil Buildings in Romania Based on the

Incremental Seismic Rehabilitation Concept”, Andreea Duţu, João Gomes Ferreira, Cristian Sandu, June

2011.

Luís Valarinho – Prémio Secil Universidades Engenharia Civil 2010 com o trabalho “Construção em vidro

estrutural - comportamento estrutural de vigas mistas vidro-GFRP”.

João Pedro Firmo – Prémio IHRU 2011 para a melhor tese de mestrado, com o título "Comportamento ao

fogo de vigas de Betão Armado reforçadas à flexão com laminados de fibras de carbono - desenvolvimento

de sistemas de protecção ao fogo".


__________________________________________________________________________________________

88



The general objectives of the group for 2012 are:

to develop research projects in the general domains of Construction Materials, Technology and Management

Innovation; Sustainable Construction; Monitoring, Rehabilitation and Conservation of the Built Heritage. An

effort will be made to concentrate efforts in increasingly less wide and more specific fields to produce relevant

results in national and international forums (measured in a significant increase in the number and impact

factor of papers in peer reviewed international journals, the supervision of PhD theses and the approval of

national and international research grants): advanced materials and technologies - establish international

cooperation and be a national leader in the field of composites (GFRP and GRC); concrete and mortars

technology – proceed with PhD and MSc studies under way (in strong collaboration with LNEC) and improve

the Mortars Section of the Construction Laboratory; construction quality, safety, environmental and health

management - increase the already large international cooperation via technical committees and international

conferences; sustainability and deconstruction strategies and technology - proceed with PhD and MSc

studies under way and be a national and international reference in the field of recycled aggregates for

concrete and mortars production; building physics and passive design - continue the very good results in the

near past and expand its potential through a strong investment in the Building Physics Section of the

Construction Laboratory (particularly in acoustics); building acclimatization and mechanical systems -

continue collaboration with the Mechanics Department of IST, strategically important in terms of sustainable

construction in terms of energy-saving; inspection, diagnosis, maintenance and rehabilitation systems -

proceed with PhD and MSc studies under way and be a national and international reference in the field of

inspection and diagnosis systems; conservation of historical building heritage - continue and strengthen

national and international cooperation projects;

to continue participating in national and international committees, participating / organizing national and

international conferences, teaching in Graduation and Post-Graduation courses in the field of construction

and participate in academic events and performing consultancy work.


A. Ph.D. theses

A.1 Concluded


and date


only)

Sónia Maria

Cancela dos

Santos Raposo

Costa e Silva

A Gestão da Actividade de

Manutenção em Edifícios Públicos.

Modelo e Definição de Estratégias

para uma Intervenção Sustentável

(The Management of the

IST/UTL

(Mar.2011)

Civil

Engineering


de Brito


__________________________________________________________________________________________

89

Maintenance Activities in Public

Buildings. Model and Definition of

Strategies for a Sustainable

Intervention)

Paulo Vaz Serra Gestão do Conhecimento na

Empresa de Construção

(Knowledge Management in a

Construction Company)

IST/UTL

(April 2011)

Civil

Engineering

Supervisor: Francisco

Loforte Ribeiro

José Alexandre

de Brito Aleixo

Bogas

Caracterização de betões

estruturais com agregados leves de

argila expandida (Characterization

of structural lightweight expanded

clay aggregate concrete)

IST/UTL

(Jun.2011)

Civil

Engineering

Supervisor: Augusto

Gomes

Nuno Gonçalo

Cordeiro Marques

de Almeida

Modelo de Gestão Técnica de

Edifícios Baseada no Desempenho

e no Risco (Framework for Risk-

Managed Performance-Based

Buildings)

IST/UTL

(Jul. 2011)

Civil

Engineering

Supervisors: Luis M.

Alves Dias, Fernando

Branco

António José

Dâmaso Santos

Matos Vilhena

Método de Avaliação do Estado de

Conservação de Edifícios. Análise

e Contributos para o seu

Aperfeiçoamento e Alargamento do

Âmbito (Method for Buildings’

Maintenance Condition

Assessment. Analysis and

Contributions for Its Improvement)

IST/UTL

(Nov. 2011)

Civil

Engineering


de Brito

Maria Dulce e

Silva Franco

Henriques

Tratamento e Consolidação de

Madeira de Pinho Degradada em

Elementos Estruturais de Edifícios

Antigos (Treatment and

Consolidation of Degraded Pine

Wood in Structural Elements of

Ancient Buildings)

IST/UTL

(Nov. 2011)

Civil

Engineering


de Brito

António Manuel

Gardete Mendes

Cabaço

Contratação de Empreendimentos

de Construção. Análise de Modelos

Tradicionais e Não-Tradicionais e

Contributos para o seu

Aperfeiçoamento (Procurement of

Construction Projects. Analysis of

Traditional and Non-Traditional

IST/UTL

(Dec.2011)

Civil

Engineering


de Brito


__________________________________________________________________________________________

90

Models and Contribution to Their

Improvement)

António José

Costa dos Santos

Desenvolvimento de um método

para a caracterização dinâmica da

iluminação natural nos edifícios

aplicável a climas mediterrânicos

(Development of a method for the

dynamic characterisation of

daylighting in mediterranean

climates)

IST/UTL

(Dec. 2011)

Civil

Engineering

Supervisor: A. Moret

Rodrigues

A.2 In progress


(starting

year)


only)

Ana Filipa Ferreira

da Silva

Modelação estatística da previsão

da vida útil dos revestimentos de

fachada (Statistical modelling of

the service life prediction of

façade coatings)

IST/UTL

(2011)

Civil

Engineering

Supervisor: Pedro Gaspar

Co-supervisor: Jorge de

Brito

Ana Sofia Santos

Ferreira

Soluções sustentáveis de elevado

desempenho para a renovação de

áreas comerciais (High-

performance sustainable solutions

for the renovations of commercial

areas)

IST/UTL

(2009)

Civil

Engineering


Brito

Joaquim Manuel

Santos Ferreira

Reabilitação sustentável –

Metodologia de apoio à decisão

integrando a incerteza. O caso do

parque edificado português

(Sustainable rehabilitation -

Decision support methodology

integrating uncertainty. The case

of the Portuguese built heritage)

IST/UTL

(2011)

Civil

Engineering


Brito

José Carlos Costa

de Almeida

Sistemas de apoio à análise de

custos do ciclo de vida de pontes

rodoviárias (Systems for life-cycle

analysis of road bridges)

UM (2007) Civil

Engineering


Brito


__________________________________________________________________________________________

91

José Dinis

Silvestre

Avaliação do ciclo de vida de

soluções construtivas em

edifícios, com aplicação nas

paredes exteriores (Life cycle

assessment of constructive

solutions in buildings, with

application in outer walls)

IST/UTL

(2009)

Civil

Engineering

Supervisor: Jorge de Brito

Luís Manuel Faria

da Rocha

Evangelista

Comportamento de betões com

agregados finos reciclados de

betão (Performance of concrete

with fine aggregates from recycled

concrete)

IST/UTL

(2008)

Civil

Engineering


Margarida Isabel

Matos Ramos

Martins dos

Santos

Desconstrução de edifícios com

ênfase nas soluções tecnológicas

em redes prediais (Deconstruction

of buildings with emphasis on

domestic plumbing)

IST/UTL

(2009)

Civil

Engineering


Maria Teresa de

Almeida Gouveia

Geraldes Freire

Recuperação de estuques antigos

(Recuperation of ancient gypsum

plasters)

IST/UTL

(2008)

Civil

Engineering


Brito

Miguel Filipe

Barreto dos

Santos

Reacção álcalis-sílica em betões

com agregados reciclados

(Alkalis-silica reaction in concrete

with recycled aggregates)

IST/UTL

(2007)

Civil

Engineering


Miguel Nuno

Caneiras Bravo

Desempenho mecânico e de

durabilidade de betões

produzidos com agregados finos

reciclados obtidos a partir de

resíduos da construção e

demolição de centrais de

reciclagem portuguesas

(Mechanical and durability

performance of concrete made

with fine recycled aggregates from

Construction and demolition

waste from Portuguese recycling

plants)

IST/UTL

(2011)

Civil

Engineering



__________________________________________________________________________________________

92

Pedro Miguel

Soares Raposeiro

da Silva

Avaliação da durabilidade de

betões auto-compactáveis

(Evaluation of the durability of

self-compacting concrete)

IST/UTL

(2009)

Civil

Engineering


Rui Duarte Neves Carbonatação de estruturas de

betão (Concrete structures

carbonation)

IST/UTL

(2007)

Civil

Engineering

Supervisor: Fernando

Branco


Brito

Paulo Cebola

Luz

Competitividade e Incentivos para

a internacionalização da indústria

da construção (Framework and

Incentives for the internalization of

the C. I.)

IST/UTL

(2010)

Civil

Engineering

Supervisor: Pedro G.

Henriques

Ana Maria Neves

Gonçalves

Técnicas de reforço sísmico de

edifícios pombalinos (Seismic

rehabiliatation techniques for

“pombaline” buildings)

IST/UTL

2011

Civil

Engineering

Supervisor: João Gomes

Ferreira

Co-supervisor: Luís

Guerreiro

João Alexandre

Medeiros

Tavares

Guerreiro

Técnicas de reforço sísmico de

edifícios antigos (Seismic

rehabiliatation techniques for

“pombaline” buildings)

IST/UTL

2011

Civil

Engineering

Supervisor: João Gomes

Ferreira

Co-supervisor: António

Gago

Luís Manuel

Jorge Morgado

Habitação de Madeira em

Portugal - Metodologia de Apoio

ao Projecto de Arquitectura

(Timber housing in Portugal. A

supporting methodology for

architectural design)

IST/UTL

2011

Architecture Supervisor: Manuel

Correia Guedes (RG6)

Co-supervisor: João

Gomes Ferreira

Vitor Sousa Análise de risco de redes de água

(Risk analysis of water systems)

IST/UTL

2009

Civil

Engineering

Supervisor: José Matos

Co-supervisors: Luís

Alves Dias and Fernando

Branco

Marco Gomes Comportamento ao fogo de perfis

pultrudidos de polímero reforçado

com fibras de vidro (GFRP) (Fire

behaviour of glass fibre reinforced

polymer (GFRP) pultruded

profiles)

IST/UTL

(2010)

Civil

Engineering

Supervisor: Fernando

Branco


Ramôa Correia


__________________________________________________________________________________________

93

José Gonilha Desenvolvimento de uma ponte

pedonal em materiais compósitos

(Development of a GFRP-ECC

hybrid pedestrian bridge)

IST/UTL

(2010)

Civil

Engineering

Supervisor: João Ramôa

Correia

Co-supervisor: Fernando

Branco

Mário Garrido Comportamento estrutural de

painéis sanduíche compósitos

para aplicações em engenharia

civil (Structural behaviour of

composite sandwich panels for

civil Engineering applications)

IST/UTL

(2010)

Civil

Engineering


Correia


Branco

Luís Valarinho Vidro Estrutural. Desenvolvimento

de Vigas Mistas GFRP-Vidro

(Structural Glass. Development of

GFRP-Glass Composite Beams)

IST/UTL

(2011)

Civil

Engineering


Correia


Branco

João Pedro Lage

da Costa Firmo








IST/UTL

(2011)

Civil

Engineering

Supervisor: João Correia

(RG 3)



(RG 4)

Vasco

Granadeiro

Produção em massa de casas

sustentáveis (Sustainable housing

mass customization)

IST/MIT

Portugal

Sustainable

Energy

Systems

Supervisor: José Pinto

Duarte


Ramôa Correia

Mário Figueiredo

e Sá

Análise de Painéis de Laje

Multicelulares Pultrudidos em

GFRP – Aplicação em Pontes

Pedonais. (Structural behaviour of

GFRP pultruded footbridges)

IST/UTL

(2009)

Civil

Engineering

Supervisor: Augusto

Gomes


Ramôa Correia e Nuno

Silvestre

Rita Maria Vilela

Nogueira

Rebocos em edifícios antigos.

Caracterização de argamassas

por técnicas de ensaio in situ e do

desempenho de tratamentos

consolidantes.

IST/UTL

(2008)

Civil

Engineering

Supervisor: A. P. Ferreira

Pinto, Augusto Gomes

Nuno Filipe

Gouveia de

Caldas de Injecção para

Alvenarias de Edifícios Antigos

(Grouts for Old Masonry

IST/UTL

(2011)

Civil

Engineering

Supervisor: A. P. Ferreira

Pinto, Augusto Gomes


__________________________________________________________________________________________

94

Almeida Consolidation)

Ana Sofia da

Silva Carreira

Transmissão de vibração e ruído

de baixa frequência em edifícios

de betão armado (Low frequency

vibration and noise transmission

through concrete buildings)

IST/UTL

(2010)

Civil

Engineering

Albano Neves e Sousa

Nuno Miguel

Morgado da

Piedade

Alexandre

Método de classificação do

isolamento a ruído aéreo e de

percussão de baixa frequência (A

method for rating of low frequency

airborne and impact sound

insulation)

IST/UTL

(2010)

Civil

Engineering

Albano Neves e Sousa

Filipe André Pais

da Costa

Vasques Osório

Gestão de fluxo de produção em

empreendimentos de construção

(Production management in

building projects)

IST/UTL

(2011)

Civil

Engineering

Inês Flores-Colen


B.1 Concluded


and date

Course Supervisors

(ICIST only)

André Cunha Manual de Controlo de Qualidade de

Construções Pré-fabricadas (quality

control in prefabricated structures)

IST/UTL

2011

Civil

Engineering

Supervisor: F.

Branco

Andreia Carina de

Bem Fontes

Influência das condições de cura na

carbonatação de argamassas

tradicionais com ligante à base de cal

aérea - Métodos de análise

IST/UTL

(Jul. 2011)

Civil

Engineering

Inês Flores-Colen

António Armando

Ortiz Soares

Análise das características mecânicas

de amostras recolhidas em fachadas

rebocadas (Analysis of mechanical

properties of samples collected on

rendering façades)

IST/UTL

(Feb. 2011)

Civil

Engineering

Supervisor: Inês

Flores-Colen

Co-supervisor:

Jorge de Brito

António Cabeças Alargamento do âmbito de aplicação

da norma EN 12354-2 às baixas

frequências (Extension of the scope of

the standard EN 12354-2 to low

IST/UTL

(Jul. 2011)

Civil

Engineering

Supervisor: Albano

Neves e Sousa


__________________________________________________________________________________________

95

frequencies)

António Pinto Programa de cálculo automático para

aplicação das normas EN ISO 12354

à verificação do Regulamento dos

Requisitos Acústicos de Edifícios

(Program for automatic use of the

standards EN ISO 12354 in the

verification of the Portuguese Building

Acoustics Regulation)

IST/UTL

(Nov. 2011)

Civil

Engineering

Supervisors: Albano

Neves e Sousa,

António Moret

Rodrigues

Bárbara Vieira

Alves Amaro

Sistemas de inspecção e diagnóstico

de elementos de isolamento térmico

pelo exterior (ETICS) em paredes

(Inspection and diagnosis systems of

External Insulation and Finishing

Systems in walls)

IST/UTL

(Feb. 2011)

Civil

Engineering

Supervisor: Jorge de

Brito

Co-supervisor: Inês

Flores-Colen

Beatriz Lopes Protecção superficial do betão.

Influência da base no comportamento

de produtos de impregnação (Surface

protection of concrete. Influence of the

substract preparation in the

performance of impregnation

products)

IST/UTL

(Jul. 2011)

Civil

Engineering

Supervisor: João

Ramôa Correia

Bruno Miguel

Mendes Costa

Regras de Medição na Construção.

Modelo aplicável em Portugal. Betão

em Superestruturas (Measurement

rules in Construction. A model

applicable to Portugal. Structural

concrete)

IST/UTL

(Oct. 2011)

Civil

Engineering

Supervisors: Luis

Alves Dias

Christopher

Alexander Coimbra

Pereira Apps

Avaliação da variabilidade da técnica

de ensaio do tubo de Karsten na

medição da permeabilidade à água

líquida em revestimentos de ladrilhos

cerâmicos e argamassas ( Evaluation

of the vriability of the Karsten tube in-

situ test technique on measuring liquid

water permeability of renders and

ceramictile coatings)

IST/UTL

(Nov. 2011)

Civil

Engineering

Inês Flores-Colen

Cristina de Vilhena

Veludo Chai

Previsão da vida útil de revestimentos

de superfícies pintadas em paredes

exteriores (Service life prediction of

IST/UTL

(Feb. 2011)

Civil

Engineering


Brito

https://fenix.ist.utl.pt/teacher/finalWorkManagement.do?method=viewFinalDegreeWorkProposal&finalDegreeWorkProposalOID=219380&contentContextPath_PATH=/docencia/docencia&_request_checksum_=d6d35d408b4d10990ff65a788b0663edd9fa7b7d




__________________________________________________________________________________________

96

painted surfaces in external walls) Co-supervisor: Pedro

Gaspar

David Manuel

Ziniga Roque

Recriação histórica de um forte

romano (Historical recreation of a

Roman fort)

IST/UTL

(Feb. 2011)

Civil

Engineering


Brito

Diogo André

Gomes Pedro

Desempenho de argamassas

fabricadas com incorporação de

materiais finos provenientes da

trituração de pneus (Performance of

mortars made with fine materials from

shredded tires)

IST/UTL

(Feb. 2011)

Civil

Engineering


Brito

Diogo António Reabilitação de revestimentos de

impermeabilização de coberturas em

terraço. Estudo experimental da

ligação entre membranas novas e

envelhecidas (Rehabilitation of

waterproofing coatings in flat roofs. An

experimental study on the connection

between new and aged membranes)

IST/UTL

(Dez. 2011)

Civil

Engineering

Supervisor: João

Ramôa Correia

Eduardo João

Vindeirinho Rino

Redes prediais de drenagem de

águas pluviais e freáticas (Rainwater

and soil water drainage systems in

buildings)

IST/UTL Civil

Engineering

Supervisors: Albano

Neves e Sousa,

Cristina Matos Silva

Emanuel da Silva

Tomás

Comportamento em serviço de painéis

multicelulares pultrudidos de GFRP

com aplicação em tabuleiros de

pontes pedonais (Service behaviour of

pultruded GFRP modular panels

applied in footbridges)

IST/UTL

(Nov. 2011)

Civil

Engineering

Supervisor: João

Ramôa Correia

Fernando Tavares Reabilitação de obras-de-arte de

betão armado. Acompanhamento de

obras na Avenida Marginal

(Rehabilitation of reinforced concrete

bridges. Survey of the works at the

Marginal Avenue bridges)

IST/UTL

(Dez. 2011)

AFA-

IST/UTL

(Jan. 2011)

Supervisor: João

Gomes Ferreira

Filipe Miguel

Matado Pato

Maurício

Aplicação de Ferramentas de Facility

Management à manutenção técnica

de edifícios de serviços (The

application of Facility Management

IST/UTL

(Oct. 2011)

Civil

Engineering

Inês Flores-Colen


__________________________________________________________________________________________

97

tools to office buildings’s technical

maintenance)

Filipe Patrício

Baptista

Sistemas prediais de distribuição de

água fria (Cold Water Supply

Systems)

IST/UTL Civil

Engineering

Supervisors: Cristina

Matos Silva, Albano

Neves e Sousa

Helena Isabel

Almeida Fortes de

Figueiredo Soares

Qualidade da Construção versus

Custos de Exploração. (Construction

quality vs exploration costs)

IST/UTL

(Oct. 2011)

Civil

Engineering

Supervisors: Luis

Alves Dias,

Margarida Proença

Inês da Silva

Manual de Controlo de Qualidade de

Estacas Moldadas (Quality control in

cast piles

IST/UTL

2011

Civil

Engineering

Supervisor: F.

Branco

Isabel Cordeiro Manual de Inspecção e Manutenção

de Edifícios (Manual for inspection of

buildings)

IST/UTL

2011

Civil

Engineering

Supervisor: F.

Branco

João Amaro Caracterização de argamassas para

reparação de betão (Characterization

of the behavior of mortars for concrete

repair)

IST/UTL

(Dez. 2011)

Civil

Engineering

Supervisor: João

Gomes Ferreira

João Bernardo

Pereira de Silva e

Sá

Sistema de inspecção e diagnóstico

de rebocos correntes em paredes

exteriores e interiores (System of

inspection and diagnosis of current

renders in outer and interior walls)

IST/UTL

(Feb. 2011)

Civil

Engineering


Brito

João Borges Instalações de gás em edifícios –

Uma análise de métodos de

dimensionamento (Gas installations in

buildings – Analysis of designing

methods)

IST/UTL

(Nov. 2011)

Civil

Engineering

Supervisor: Albano

Neves e Sousa

João Carlos Duarte

Tiago

Argamassas de cal aérea com

incorporação de cinzas de casca de

arroz. Estudo da influência da

granulometria das cinzas (Mortars

with air lime and rice husk ash. Study

of the influence of the ash

granulometry)

IST/UTL

(Nov. 2011)

Civil

Engineering

Supervisors: A. P.

Ferreira Pinto,

Augusto Gomes

João Henrique

Mourão Ladeira

Avaliação em serviço de sistemas de

isolamento térmico pelo exterior em

fachadas (In-service visual

IST/UTL Civil

Engineering

Supervisors: Inês

Flores-Colen,



__________________________________________________________________________________________

98

assessment of external thermal

insulation composite system on

buildings’ façades)

João Manuel

Esperança Venes

Aplicação CAD de verificação do

RCCTE – Automatização da recolha

de informação relevante em plantas

de arquitectura (CAD program for

RCCTE verification – Automation of

collection of relevant information from

architecture plans)

IST/UTL

(Jun. 2011)

Civil

Engineering

Supervisors:

Joaquim Dias,

Albano Neves e

Sousa

João Martins Controle de Qualidade e Durabilidade

de Estruturas de GFRP (Quality

controlo f GFRP structures)

IST/UTL

2011

Civil

Engineering

Supervisor: F.

Branco


Ramôa Correia

João Miguel Garcia

Arromba

Influência do suporte no desempenho

de rebocos aplicados em suportes de

tijolo e betão recorrendo a técnicas de

ensaio in-situ (Study of the influence

of support on the performance of

renders applied to brick and concrete

using in-situ testing)

IST/UTL

(Nov. 2011)

Civil

Engineering

Inês Flores-Colen

João Santos Análise do comportamento de

paredes tipo Berlim definitivo

(Analysis of the behaviour of concrete

Berlim type rataining walls)

IST/UTL

(Nov. 2011)

Civil

Engineering

Supervisors: João

Gomes Ferreira, Rui

Gomes

João Sousa Durabilidade de perfis pultrudidos de

viniléster reforçado com fibras de

vidro (GFRP) (Durability of GFRP

Pultruded Profiles made of Vinylester

Resin)

IST/UTL

(Dez. 2011)

Civil

Engineering

Supervisor: João

Ramôa Correia

João Vasco

Valentim de Matos

Regras de Medição na Construção.

Modelo aplicável em Portugal. Betão

em Infra-estruturas (Measurement

rules in Construction. A model

applicable to Portugal. Concrete in

infrastruture construction projects)

IST/UTL

(Oct. 2011)

Civil

Engineering

Supervisor: Luis

Alves Dias

José João Pires

Branco Duarte

Silva

Vidas úteis em elementos da

construção em edifícios habitacionais

(Service life of residential building

IST/UTL

(Nov. 2011)

Civil

Engineering

Inês Flores-Colen


__________________________________________________________________________________________

99

elements – Skin and interior systems)

José Miguel

Rodrigues Tuna

Caracterização in-situ de

eflorescências e de outros compostos

salinos em fachadas rebocadas (In-

situ characterization of efflorescence

and other salts in rendering façades)

IST/UTL

(Jul. 2011)

Civil

Engineering

Supervisor: Inês

Flores-Colen

Co-supervisor:

Jorge de Brito

Luís Alexandre

Veríssimo Ferreira

Desempenho mecânico de betões

com incorporação de resíduos de

plástico (PET) (Mechanical

performance of concrete with

incorporation of plastic waste (PET))

IST/UTL

(Feb. 2011)

Civil

Engineering


Brito

Co-supervisor:

Nabajyoti Saikia

Manuel Costa Controle de Qualidade de

Revestimentos de Fachada em Pedra

(Quality control of stone façades)

IST/UTL

2011

Civil

Engineering Supervisor: F.

Branco

Marta Santos Avaliação do desempenho do betão

projectado na reabilitação de

estruturas (Performance of shotcrete

in structural rehabilitation)

AFA-

IST/UTL

(Jan. 2011)

Militar

Aeronautics,

Airfield

Engineering

Supervisors: João

Gomes Ferreira,

João Correia

Miguel Joaquim

Pires Hipólito Melo

Guimarães

Estratégias de Reabilitação Térmica

em Edifícios Habitacionais ((Thermal

Rehabilitation Strategies for

Residential Buildings)

IST/UTL

(Nov. 2011)

Civil

Engineering

Supervisors: A.

Moret Rodrigues,

Albano Neves Sousa

Nuno Filipe

Loureiro Vaz de

Carvalho

Soluções sustentáveis para

abastecimento de água (Sustainable

Water Supply Systems)

IST/UTL Civil

Engineering

Supervisor: Cristina

Matos Silva

Nuno Godinho

Teodoro

Contribuição para Sustentabilidade na

Construção Civil: Reciclagem e

Reutilização de Materiais

(Contribution to Sustainability in

Construction: Recycling and

Reutilization of Materials)

IST/UTL

(Out. 2011

Civil

Engineering


Henriques

Paula Alexandra da

Silva Mendes

Sistemas de impermeabilização de

fundações de edifícios e estruturas

especiais (Waterproofing systems for

foundations of buildings and special

structures)

IST/UTL

(Feb. 2011)

Civil

Engineering


de Brito


__________________________________________________________________________________________

100

Pedro Daniel

Marques Teixeira

Avaliação do risco no comportamento

face à água de elementos

construtivos em fachadas de edifícios

correntes (Risk evaluation in the

behavior face to water of constructive

elements in current building facade)

IST/UTL

(Nov. 2011)

Civil

Engineering

Inês Flores-Colen

Pedro Duarte Estudo experimental do efeito da

reparação de fendas no

comportamento de vigas de betão

armado reforçadas à flexão com

laminados de CFRP (Experimental

Study on the effect of crack injection

on the flexural behavior of reinforced

concrete beams strengthened with

CFRP laminates)

IST/UTL

(Dez. 2011)

Civil

Engineering

Supervisors: João

Gomes Ferreira,

João Ramôa Correia

Pedro Miguel da

Costa Santiago

Estudo experimental da resistência de

aderência entre CFRP e betão em

elementos sujeitos a cargas de

impacto de curta duração

(Experimental study on the bond

strength between CFRP and concrete

in elements subjected to impact loads

of short duration)

IST/UTL

(Nov. 2011)

Civil

Engineering

Inês Flores-Colen

Ricardo Filipe

Barros Querido


águas quentes sanitárias (Domestic

Hot Water Supply Systems)

IST/UTL

(May/2011)

Civil

Engineering


Matos Silva, Albano

Neves e Sousa

Rita Barreiros

Ilharco Lopes Pires

Sistema de inspecção, diagnóstico e

reabilitação de revestimentos por

pintura em fachadas rebocadas

(Inspection, diagnosis and

rehabilitation system of paint coatings

in rendered façades)

IST/UTL

(Feb. 2011)

Civil

Engineering


Brito

Rui Vasco Pacheco

Santos da Silva

Desempenho em termos de

durabilidade de betões com

incorporação de resíduos de plástico

(PET) (Durability-related performance

of concrete with incorporation of

plastic waste (PET))

IST/UTL

(Feb. 2011)

Civil

Engineering


Brito

Co-supervisor:

Nabajyoti Saikia


__________________________________________________________________________________________

101

Sara de Castro

Fernandes



incorporação de vidro moído

(Durability performance of concrete

with crushed glass)

IST/UTL

(Feb. 2011)

Civil

Engineering


Brito

Sara Maria Garcia

Gaspar

Análise da interface entre elementos

de parede e camadas de revestimento

(Analysis of the interface between wall

elements and its render)

IST/UTL Civil

Engineering


Matos Silva, Inês

Flores-Colen

Sara Morais Neves Estudo da aplicabilidade de sistemas

construtivos no desempenho da

sustentabilidade na engenharia civil

(Study of the applicability of

construction systems in the

performance of sustainability in civil

engineering)

IST/UTL

(Out. 2011)

Civil

Engineering


Henriques

Sara Sérgio

Madureira

Plano e manual de inspecção e

manutenção em fachadas de edifícios

correntes (Inspection and

maintenance plan and manual for

current buildings’ facades)

IST/UTL

(Feb. 2011)

Civil

Engineering

Supervisor: Inês

Flores-Colen


de Brito

Valter Henriques Impacte Ambiental de Estruturas de

Edifícios - Produção de CO2 (CO2

production in building structures)

IST/UTL

2011

Civil

Engineering

Supervisor: F.

Branco

B.2 In progress


(ICIST only)

Mickael Cavaco Manutenção em construções

aeroportuárias (Maintenance of airport

constructions)

IST/UTL Civil

Engineering

Inês Flores-Colen

Leonardo Manuel

Pita Afonso

Monitorização da actividade de

manutenção de coberturas de edifícios

apoiada em tecnologias de

visualização e interacção (Monitoring

of maintenance activity of buildings’

roofs through technologies of

visualization and interaction)

IST/UTL Civil

Engineering

A.Z. Sampaio

(Group 5) / Inês

Flores-Colen

https://fenix.ist.utl.pt/teacher/viewStudentCurriculum.do?method=prepare&registrationOID=147836&executionDegreeId=13399&contentContextPath_PATH=/docencia/docencia&_request_checksum_=df78abc18b59b5c8a3a84fe18a6176a2c7348722



__________________________________________________________________________________________

102

Miguel Ângelo

Jorge Góis

Custódio

Técnicas de ensaio para a

determinação da porosidade aparente

em amostras de reboco (Testing

techniques for determinantion of open

porosity of renders samples)

IST/UTL Civil

Engineering

Inês Flores-Colen

Ana Catarina

Antunes Lopes

Avaliação da variabilidade de técnicas

em obra utilizadas na análise de

revestimentos de ladrilhos cerâmicos e

argamassas - Medição da aderência

(Uncertainty of in-situ techniques for

analysis of ceramic tiles and mortars)

IST/UTL Civil

Engineering

Inês Flores-Colen

Sofia Figueiredo

Gomes

Conceitos de Facility Management na

gestão e manutenção técnica de

edifícios hoteleiros (Facility

Management in management and

technical maintenance of hotels)

IST/UTL Civil

Engineering

Inês Flores-Colen

Madalena Delgado

Ventura

Patologia e manutenção pró-activa de

revestimento de pisos em edifícios

correntes (Pathology and proactive

maintenance of floor coatings in

current buildings)

IST/UTL Civil

Engineering

Inês Flores-Colen

João Nicolau Pires

Lopes Veiga

Morgado

Plano e manual de inspecção e

manutenção em coberturas de

edifícios correntes (Plan and manual of

inspection and maintenance of roofs in

current buildings)

IST/UTL Civil

Engineering

Inês Flores-Colen

Liliana Sofia Neno

Páscoa

Índice de secagem como parâmetro

em serviço dos rebocos aplicados em

paredes exteriores (Drying index as a

parameter in the service of rendering

walls)

IST/UTL Civil

Engineering

Inês Flores-Colen

Khairunissa Firoz

Amirali Jafar

Controlo Técnico da Construção:

Enquadramento e Implementação da

Actividade (Technical controlo of

construction projects: framework and

implementation of the activity)

IST/UTL Civil

Engineering

Supervisors: Luis

Manuel Alves Dias,

Nuno Goncalo

Cordeiro Marques de

Almeida

José Miguel

Martins da Silva

Lourenço

Segurança contra incêndios: Avaliação

do desempenho de edifícios novos

(Fire safety: Performance evaluation of

IST/UTL Civil

Engineering


Matos Silva, Nuno

Goncalo Cordeiro


__________________________________________________________________________________________

103

new buildings) Marques de Almeida

João Daniel Lopes

Ferreira

Análise de Sensibilidade de

Indicadores de Desempenho Térmico

de Edifícios (Sensitivity Analysis of

Building Thermal Performance

Indicators)

IST/UTL Civil

Engineering

Supervisors: A. Moret

Rodrigues, Cristina

Matos Silva

Rui Alexandre

Víctor Cobanco


águas para aquecimento ambiente

(Hot Water Heating Systems)

IST/UTL Civil

Engineering


Matos Silva, Albano

Neves e Sousa

José Saraiva Lima Comportamento ao fogo de betões

produzidos com agregados de

resíduos plásticos seleccionados (Fire

behaviour of concrete made with

recycled plastic aggregate)

IST/UTL Civil

Engineering

Supervisor: João

Correia

Co-supervisor:

Jorge de Brito

Diogo do Couto

Serpa

Desempenho mecânico de betões com


(Mechanical performance of concrete

with crushed glass)

IST/UTL Civil

Engineering


Brito

Filipa Alexandra

Evangelista

Emídio


de pedra natural em paredes

exteriores (método factorial) (Service

life prediction of natural stone cladding

in external walls (factor method))

IST/UTL Civil

Engineering


Brito

Co-supervisor: Pedro

Gaspar

Pedro Jorge da

Cruz Martins


incorporação de agregados grossos de

resíduos da indústria do mármore


with incorporation of coarse aggregate

from the marble industry waste)

IST/UTL Civil

Engineering


Brito

António Jorge

Nunes Pedro

André



incorporação de agregados grossos de


(Durability-related performance of

concrete with incorporation of coarse

aggregate from the marble industry

waste)

IST/UTL Civil

Engineering


Brito


__________________________________________________________________________________________

104

Bruno Estanqueiro Análise do ciclo de vida da utilização

de agregados reciclados no fabrico de

betão (Life cycle analysis of the use of

recycled aggregate in concrete

production)

IST/UTL Engineering

and Industrial

Management


Brito

Micael Ferreira Análise das características mecânicas

de amostras recolhidas em fachadas

rebocadas (Analysis of mechanical

properties of samples collected on

rendering façades)

IST/UTL Civil

Engineering

Supervisor: Inês

Flores-Colen


de Brito

Renata Borges

Oliveira

Desempenho de argamassas com

incorporação de vidro moído (efeitos

de fíler e pozolânico) (Performance of

mortars with crushed glass (filler and

pozzolanic effects)

IST/UTL Civil

Engineering


Brito

Paulo Medeiros

Penacho

Desempenho de argamassas com


(integração de RCD e reacção álcalis-

sílica) (Performance of mortars with

crushed glass (incorporation of CDW

and alkali-silica reaction)

IST/UTL Civil

Engineering


Brito

Sofia Franqueira

Ximenes


de isolamento térmico pelo exterior

(ETICS) em paredes (Service life

prediction of external thermal

insulation (ETICS) in walls)

IST/UTL Civil

Engineering


Brito

Co-supervisor: Pedro

Gaspar

Nuno Gonçalo

Sequeira Correia

Pargana

Previsão dos impactes ambientes do

ciclo de vida dos materiais de

isolamento térmico de edifícios

(Prediction of the environmental

impacts of the life cycle of thermal

insulation Systems from buildings)

IST/UTL Environmental

Engineering


Brito

André Filipe

Correa dos Santos

Vaz Alves


incorporação de agregados finos

reciclados cerâmicos (Mechanical

performance of concrete with fine

recycled ceramic aggregates)

IST/UTL Civil

Engineering


Brito


Correia


__________________________________________________________________________________________

105

Tiago Ferreira

Vieira



incorporação de agregados finos

reciclados cerâmicos (Durability-

related performance of concrete with

fine recycled ceramic aggregates)

IST/UTL Civil

Engineering


Brito


Correia

Diogo Correia

Costa da Silva


incorporação de agregados finos de



with incorporation of coarse aggregate

from the marble industry waste)

IST/UTL Civil

Engineering


Brito

Filipe João

Ferreira Gameiro



incorporação de agregados finos de


(Durability-related performance of

concrete with incorporation of coarse

aggregate from the marble industry

waste)

IST/UTL Civil

Engineering


Brito

José Maria

Guedes Machado

Lemos de

Figueiredo

Desempenho mecânico de betões

leves com incorporação de agregados

reciclados de betões leves

(Mechanical performance of

lightweight concrete made with

aggregates recycled from lightweight

concrete)

IST/UTL Civil

Engineering


Brito

Co-supervisor: José

Bogas

João Miguel

Quilhó Correia

Cabaço


durabilidade de betões leves com

incorporação de agregados reciclados

de betões leves (Durability-related

performance of lightweight concrete

made with aggregates recycled from

lightweight concrete)

IST/UTL Civil

Engineering


Brito

Co-supervisor: José

Bogas

Miguel Ângelo da

Silva Bernardo

Gestão dos resíduos da construção e

demolição, a nível da caracterização

de resíduos e processos (Management

of construction and demolition waste,

at the level of waste and processes

characterization)

IST/UTL Civil

Engineering


Brito


__________________________________________________________________________________________

106

Alberto José

Correia Santos

Sistema de inspecção e diagnóstico de

caixilharias de edifícios (Inspection

and diagnosis system for window

framing in buildings)

IST/UTL Civil

Engineering


Brito


Flores-Colen

Mário Jorge

Moreira Vicente

Tecnologia e reabilitação de

caixilharias de edifícios (Technology

and rehabilitation of window framing in

buildings)

IST/UTL Civil

Engineering


Brito


Flores-Colen

Beatriz Rosa de

Abreu Pereira

Marques

Caracterização de anomalias em

edifícios escolares Portugueses de

tipologia Liceu (Characterization of the

anomalies of Portuguese school

buildings of the Lyceum type)

IST/UTL Construction

and

Rehabilitation


Brito


Correia

Clara Isabel

Fernandes Pereira

Caracterização das escolas industriais

dos anos 50 e 60 do século XX no

Centro-Sul de Portugal

(Characterization of the industrial

Scholl from the 1950’s and a960’s in

the South-Centre of Portugal)


and

Rehabilitation


Brito


Correia

Joana Alexandra

Mirante Barrelas

Implementação de um sistema de

diagnóstico de anomalias em escolas

de tipologia pavilhonar em Portugal

(Implementation of an anomalies

diagnosis system in pavilion-type

schools in Portugal)


and

Rehabilitation


Brito


Correia

João Miguel

Antunes

Isolamento Térmico de Fachadas de

Edifícios: caracterização das soluções

e análise do desempenho (Thermal

Insulation of Building Facades:

available solutions and performance

analysis)

IST/UTL Civil

Engineering

Supervisor: A. Moret

Rodrigues

Miguel Raul Casa-

Branca Santos

Ventilação Natural e Comportamento

Térmico de Edifícios (Natural

Ventilation and Building Thermal

Performance)

IST/UTL Civil

Engineering

Supervisors: A. Moret

Rodrigues, Maria da

Glória Gomes

Alexandre

Canteau de

Menezes Serafim

Análise in-situ do comportamento

físico de revestimentos de fachadas

(In-situ analysis of physical

IST/UTL Civil

Engineering

Supervisors: Maria

da Glória Gomes,

Inês Flores-Colen

https://fenix.ist.utl.pt/teacher/finalWorkManagement.do?method=viewFinalDegreeWorkProposal&finalDegreeWorkProposalOID=299746&contentContextPath_PATH=/docencia/docencia&_request_checksum_=b0bb418da51e910fbc6a219dd21a7b38f56ee75f




__________________________________________________________________________________________

107

performance of façade coatings)

Ana Catarina de

Freitas Diogo

Sistemas envidraçados com e sem

protecção solar (Glazing systems with

and without shading devices)

IST/UTL Architecture Supervisors: Maria

da Glória Gomes,

Manuel Correia

Guedes

André Filipe

Silveira Castanho

Avaliação experimental do conforto

pedestre em ambiente urbano

(Experimental assessment of

pedestrian comfort in urban areas)

IST/UTL Civil

Engineering

Supervisors: Maria

da Glória Gomes

Pedro Miguel

Esteves Nunes

Simulação energética de edifícios:

comparação entre a solução de

isolamento tradicional e a solução

E.T.I.C.S. (Building Energy Simulation:

comparison between traditional and

E.T.I.C.S. insulation solutions)

IST/UTL Civil

Engineering

Supervisors: Maria

da Glória Gomes,


Tiago Moura

Viegas Henriques

dos Santos

Estudo do desempenho térmico de

uma moradia unifamiliar. Propostas de

reabilitação. (Thermal performance of

a unifamiliar house. Proposals for

rehabilitation.)

IST/UTL Civil

Engineering

Supervisors: Maria

da Glória Gomes

Luís Miguel

Albuquerque

Almeida Santos

Análise in-situ do comportamento

mecânico de revestimentos de

fachadas (In-situ analysis of

mechanical performance of façade

coatings)

IST/UTL Civil

Engineering

Supervisors: Inês

Flores-Colen, Maria

da Glória Gomes

João Ricardo

Martins Lage

Reabilitação Energética de Edifícios

(Energy rehabilitation of buildings)

IST/UTL Civil

Engineering


Matos Silva, Maria da

Glória Gomes

Cláudio Ribeiro

Faustino

Tecnologias de construção sustentável

– sistemas passivos (Sustainable

building technologies - passive

systems)

IST/UTL Civil

Engineering

Supervisors:

Fernando Branco,

Maria da Glória

Gomes

Luís Pedro Bispo Tecnologias de construção sustentável

– sistemas activos (Sustainable

building technologies - active systems)

IST/UTL Civil

Engineering

Supervisors:

Fernando Branco,

Maria da Glória

Gomes


__________________________________________________________________________________________

108

António Martins Custo de Construção para Alterações

de Utilização de Espaços (Cost

estimate for changes in the function of

construction spaces)

IST/UTL Civil

Engineering


Henriques

Elizeu Vinagre Defeitos de construção e sua

prevenção (Construction faults and its

prevention)

IST/UTL Civil

Engineering


Henriques

Duarte Sousa Parcerias na estratégia de

internacionalização das empresas de

C.C. (Strategic partnership for the

internalization of Portuguese civil

construction)

IST/UTL Civil

Engineering


Henriques

Mário Brás Reabilitação de escolas industriais

(Rehabilitation of industrial schools)

IST/UTL Civil

Engineering

Supervisors: João

Gomes Ferreira,

Teresa Heitor

Telmo Antunes Reforço de fundações de edifícios

antigos (Foundation strengthening in

old buildings)


and

Rehabilitation

Supervisors: João

Gomes Ferreira, Rui

Gomes

Vera Correia Durabilidade do betão com escórias de

alto-forno (Durability of concrete with

blast furnace slag)

IST/UTL Civil

Engineering

Supervisor: João

Gomes Ferreira

Tiago Henrique Análise do comportamento de

contenções periféricas com cortinas de

estacas (Analysis of the behavior of

concrete pile retaining walls)

IST/UTL Civil

Engineering

Supervisors: João

Gomes Ferreira, Rui

Gomes

Tiago Barroqueiro Técnicas e procedimentos de ensaio

para a avaliação do desempenho de

argamassas da construção

(Techniques and experimental

procedures for performance

assessment of construction mortars)

IST/UTL Civil

Engineering

Supervisors: João

Gomes Ferreira, Inês

Flores

Tibério Yan Técnicas e procedimentos de ensaio

para a avaliação do desempenho de

betões (Techniques and experimental

procedures for performance

assessment of concrete)

IST/UTL Civil

Engineering

Supervisors: João

Gomes Ferreira, Inês

Flores


__________________________________________________________________________________________

109

Luís Gonçalves Construção de estruturas de madeira

com peças de lamelados colados

(Construction of timber structures with

glued laminated timber)

IST/UTL Civil

Engineering

Supervisor: João

Gomes Ferreira

David Marcelino Avaliação do efeito do envelhecimento

na resistência mecânica de lamelados

colados (Evaluation of the effect of

defects on the mechanical resistance

of glued laminated timber beams)

IST/UTL Civil

Engineering

Supervisor: João

Gomes Ferreira

Liliana Baltazar Protecção superficial do betão.

Comportamento e durabilidade de

produtos hidrófugos (Surface

protection of concrete. Influence of the

surface roughness in the behaviour of

impregnation products)

IST/UTL Civil

Engineering

Supervisor: João

Ramôa Correia

Tiago Santos Durabilidade de perfis de GFRP -

Modelação da degradação (Durability

of GFRP pultruded profiles - Modelling

of degradation)

IST/UTL Civil

Engineering

João Ramôa Correia

Diogo Ferreira Comportamento estrutural em serviço

e à rotura de painéis sanduíche

compósitos (Serviceability and failure

behaviour of sandwich composite

panels)

IST/UTL Civil

Engineering

Supervisor: João

Ramôa Correia

Co-Supervisor:

Fernando Branco

Pedro Loureiro

Fazenda

Planeamento, Gestão e Controlo de

Qualidade de uma Obra de Reparação

de Betão em Ambiente Marítimo

(Planning, management and quality

control of a repair work in maritime

environment)

IST/UTL Civil

Engineering

Supervisor: João

Ramôa Correia


Gomes Ferreira

Bruno Silva Durabilidade de perfis pultrudidos de

poliéster reforçado com fibras de vidro

(GFRP) para reabilitação estrutural.

Estudo da reversibilidade da

degradação. (Durability of glass fibre

reinforced polyester profiles for

structural rehabilitation. Study of the

degradation reversibility)

IST/UTL Civil

Engineering

Supervisor: João

Ramôa Correia

https://fenix.ist.utl.pt/teacher/finalWorkManagement.do?method=viewFinalDegreeWorkProposal&finalDegreeWorkProposalOID=219379&contentContextPath_PATH=/docencia/docencia&_request_checksum_=5c47f42670eae1d5052d2263568ec3afdb38eb8d



https://fenix.ist.utl.pt/teacher/finalWorkManagement.do?method=viewFinalDegreeWorkProposal&finalDegreeWorkProposalOID=204747&contentContextPath_PATH=/docencia/docencia&_request_checksum_=1c51112d81dd8e2b7552085138faa56d120a60e8




__________________________________________________________________________________________

110

Francisco Felício

Nunes


GFRP: caracterização experimental e

estudo numérico (Structural behaviour

of GFRP pultruded beams:

experimental and numerical study)

IST/UTL Civil

Engineering

Supervisors: João

Ramôa Correia,

Nuno Silvestre

Carlos André

Quaresma

Reabilitação de revestimentos de

impermeabilização de coberturas em

terraço com produtos líquidos/

pastosos aplicados sobre membranas

existentes (Repair of waterproofing

layers used in flat roofs using liquid

products applied over existing

bituminous sheets - experimental

study)

IST/UTL Civil

Engineering

Supervisor: João

Ramôa Correia

João Santana Desempenho de produtos de

impregnação – Influência da humidade

do suporte (Surface protection of

concrete. Influence of the surface

humidity in the behaviour of

impregnation products)

IST/UTL Civil

Engineering

Supervisor: João

Ramôa Correia

Manuel Mendes

Correia

Comportamento Estrutural de Vigas de

GFRP Reforçadas com Mantas de

CFRP: Modelação Numérica

(Structural Behaviour of GFRP Beams

Strengthened with CFRP Sheets:

Numerical Modelling)

IST/UTL Civil

Engineering

Supervisors: Nuno

Silvestre, João

Ramôa Correia

Joana Ribeiro

Batista de Sousa

Comportamento em serviço de um

protótipo de ponte pedonal mista em

betão - compósito de GFRP (Service

behaviour of a prototype of a hybrid

GFRP-concrete pedestrian bridge)

IST/UTL Civil

Engineering

Supervisor: João

Ramôa Correia

José Miguel da

Costa Pires

Comportamento mecânico a

temperaturas elevadas de perfis

pultrudidos de compósito de GFRP

(Mechanical behaviour at elevated

temperature of GFRP pultruded

profiles)

IST/UTL Civil

Engineering

Supervisor: João

Ramôa Correia

Diogo Miguel Pita

de Abreu Pitta

Comportamento mecânico de

estruturas de betão armado reforçadas

com laminados de fibras de carbono

IST/UTL Civil

Engineering

Supervisor: João

Ramôa Correia


__________________________________________________________________________________________

111

(CFRP) a temperaturas elevadas:

caracterização experimental da ligação

betão-CFRP (Mechanical behaviour of

reinforced concrete Structures

strengthened with carbon fibre

reinforced polymer (CFRP) laminates

at elevated temperature: experimental

characterization of CFRP-concrete

connection)

Ana Carolina

Magalhães

Marinho

Durabilidade de ligações coladas com

resina epóxida entre perfis de GFRP

utilizados em reabilitação (Durability of

adhesively bonded connections with

epoxy resin between GFRP profiles

used in rehabilitation)

IST/UTL Civil

Engineering

Supervisor: João

Ramôa Correia

Pedro Francisco

de Castro Correia

de Barros

Durabilidade de ligações coladas com

resina de poliuretano entre perfis de

GFRP utilizados em reabilitação

(Durability of adhesively bonded

connections with polyurethane resin

between GFRP profiles used in

rehabilitation)

IST/UTL Civil

Engineering

Supervisor: João

Ramôa Correia

Francisco Maria

Marnoto Martinho

Fluência em pontes constituídas por

materiais compósitos (Creep in bridges

made of composite materials)

IST/UTL Civil

Engineering

Supervisor: João

Ramôa Correia

Ismael Lopes

Aguiar

A influência das condições de cura nas

características de argamassas de cal

aérea e metacaulino (The influence of

curing conditions on the characteristics

of air-lime and metacaulin mortars)

IST/UTL Civil

Engineering

Supervisor: A.P.

Ferreira Pinto

Paulo Augusto

Drumonde

Loureiro

A influência de cinzas volantes na

retracção autogénea de pastas

cimentícias (Fly ashes influence on the

autogenous shrinkage of cement

pastes)

IST/UTL Civil

Engineering

Supervisor: Augusto

Gomes

Vasco Nuno

Aguiar Medina

Efeito de adjuvantes redutores de

retracção na retracção química de

pastas de cimento (Effect of concrete

admixtures in reducing the chemical

shrinkage)

IST/UTL Civil

Engineering

Supervisor: Augusto

Gomes


__________________________________________________________________________________________

112

Sérgio Bandeira

Machado

Rodrigues

Madeira modificada (Modified timber) IST/UTL Civil

Engineering

Supervisor: Augusto

Gomes

João Carlos

Mouro Sequeira

Estudo de caldas de injecção

comerciais para alvenarias de pedra

(Commercial grouts for old masonry)

IST/UTL Civil

Engineering

Supervisors: A.P.

Ferreira Pinto,

Augusto Gomes

Joao Pedro

Florindo Lourenco

Estudo do comportamento de varões

de aço para betão obtidos através do

processo "Tempcore" (Mechanical

behaviour of “tempcore” steel for

reinforced concrete)

IST/UTL Civil

Engineering

Supervisors: Augusto

Gomes, A.P. Ferreira

Pinto

João Pedro dos

Santos Laranjeira

Tratamentos ignífugos da Madeira

(Wood fire-retardant treatments)

IST/UTL Civil

Engineering

Supervisor: A.P.

Ferreira Pinto

Pedro Santos Paredes duplas de elevado

rendimento de construção (Cavity

walls of improved total productive man-

hours)

IST/UTL Civil

Engineering

Supervisor: Albano

Neves e Sousa,

Fernando Branco

Bruno Correia Instalações de gás em edifícios – Uma

análise de normas e regulamentos

(Gas installations in buildings –

Analysis of standards and regulations)

IST/UTL Civil

Engineering

Supervisor: Albano

Neves e Sousa

Pedro Faria Reabilitação energética de edifícios –

Envolvente versus equipamentos

(Building energy retrofitting – Envelope

versus equipment)

IST/UTL Civil

Engineering

Supervisor: Albano

Neves e Sousa



1. Bordalo, R.; Brito, J. de; Gaspar, P.; Silva, A.: "Service Life Prediction Modelling of Adhesive Ceramic Tiling

Systems", Building Research and Information, V. 39, n.º 1, Taylor & Francis, UK, January 2011, pp. 66-78

(IF=1.250; NC=0).

2. Coelho, A.; Brito, J. de: "Distribution of Materials in Construction and Demolition Waste in Portugal", Waste

Management & Research, V. 29, n.º 8, Sage, UK, August 2011, pp. 843-853 (IF=1.222; NC=0).

3. Coelho, A.; Brito, J. de: "Economic Analysis of Conventional Versus Selective Demolition - A Case Study",

Resources, Conservation and Recycling, V. 55, n.º 3, Elsevier, UK, January 2011, pp. 382-392 (IF=1.974;

NC=0).


__________________________________________________________________________________________

113

4. Coelho, A.; Brito, J. de: "Generation of Construction and Demolition Waste (CDW) in Portugal", Waste

Management & Research, V. 29, n.º 7, Sage, UK, July 2011, pp. 739-750 (IF=1.222; NC=0).

5. Correia, J.R.; Almeida, N.M.; Figueira, J.R.: “Reusing fine waste from the cutting process of GFRP

composites: Application to concrete mixtures”, Journal of Cleaner Production, V. 19, n.º 15, Elsevier, UK,

October 2011, pp. 1745-1753, 2011 (IF = 2.425; NC = 1).

6. Correia, J.R.; Branco, F.A.; Silva, N.; Camotim, D.; Silvestre, N.: “First-Order, Buckling and Post-Buckling

Behaviour of GFRP Pultruded Beams Part 1: Experimental Study”, Computers and Structures, V. 89, n.º 21-

22, Elsevier, UK, November 2011, pp. 2052-2064 (IF = 1.722; NC = 1)

7. Correia, J.R.; Valarinho, L.; Branco, F.A.: “Ductility and post-cracking strength of glass beams strengthened

with GFRP pultruded composites”, Composite Structures, V. 93, n.º 9, Elsevier, UK, August 2011, pp. 2299-

2309 (IF = 2.006; NC = 0)

8. Ferreira, L.; Brito, J. de; Barra, M.: "Influence of the pre-saturation of recycled coarse concrete aggregates on

the fresh and hardened properties of concrete", Magazine of Concrete Research, V. 63, No. 8, Thomas

Telford, London, August 2011, pp. 617-627 (IF=0.520; NC=0).

9. Flores-Colen, I.; Brito, J. de; Freitas, V. de: "On-Site Performance Assessment of Rendering Façades for

Predictive Maintenance", Structural Survey, V. 29, n.º 2, Emerald, UK, May 2011, pp. 133-146 (IF=0.000;

NC=0).

10. Fonseca, N.; Brito, J. de; Evangelista, L.: "The Influence of Curing Conditions on the Mechanical Performance

of Concrete Made with Coarse Recycled Concrete Aggregates", Cement and Concrete Composites, V. 33,

No. 6, Elsevier, UK, June 2011, pp. 637-643 (IF=1.527; NC=0).

11. Gaião, C.; Brito, J. de; Silvestre, J.: "Inspection and Diagnosis of Gypsum Plasterboard Walls", Journal of

Performance of Constructed Facilities, V. 25, n.º 3, ASCE, Reston, USA, May / June 2011, pp. 172-180

(IF=0.293; NC=0).

12. Gaspar, P.; Brito, J. de: "Limit States and Service Life of Cement Renders on Facades", Journal of Materials

in Civil Engineering, V. 23, n.º 10, ASCE, Reston, USA, October 2011, pp. 1393-1404 (IF=0.677; NC=0).

13. Gomes, I.; Lopes, M.; Brito, J. de: "Seismic Resistance of Earth Construction in Portugal", Engineering

Structures, V. 33, n.º 3, Elsevier, UK, March 2011, pp. 932-941 (IF=1.363; NC=1).

14. Gonçalves, M.; Grandão Lopes, J.; Brito, J. de: "Mechanical Performance of Lap Joints of Flat Roof

Waterproofing Membranes Subjected to Artificial Weathering", Experimental Techniques, V. 35, n.º 3, SEM,

May / June 2011, pp. 21-28 (IF=0.505; NC=1).

15. Lopes, J.G.; Correia, J.R.; Machado, M.X.B.: “Dimensional Stability of Waterproofing Bituminous Membranes

used in Flat Roofs”, Construction and Building Materials, V. 25, n.º 8, Elsevier, UK, August 2011, pp. 3229-

3235 (IF = 1.456; NC = 0)

16. Margalha, G.; Veiga, R.; Brito, J. de: "Traditional Methods of Mortar Preparation: the Hot Lime Mix Method",

Cement & Concrete Composites, V. 33, No. 8, Elsevier, UK, September 2011, pp. 796-804 (IF=1.527; NC=0).

17. Marques, J.A.; Lopes, J.G.; Correia, J.R.: “Durability of the adhesion between bituminous coatings and self-

protection mineral granules of waterproofing membranes”, Construction and Building Materials, V. 25, n.º 1,

Elsevier, UK, January 2011, pp. 138-144 (IF = 1.456; NC = 1)


__________________________________________________________________________________________

114

18. Neto, N.; Brito, J. de: "Inspection and Defect Diagnosis System for Natural Stone Cladding", Journal of

Materials in Civil Engineering, V. 23, n.º 10, ASCE, Reston, USA, October 2011, pp. 1433-1443 (IF=0.677;

NC=0).

19. Neves e Sousa, A; Gibbs, B.M.: “Low frequency impact sound transmission in dwellings through

homogeneous floors and floating floors”, Applied Acoustics, V. 72, n.º 4, Elsevier, UK, March 2011, pp. 177-

189. (IF=0.887; NC = 0).

20. Pereira, A.; Palha, F.; Brito, J. de; Silvestre, J.: "Inspection and Diagnosis System for Gypsum Plasters in

Partition Walls and Ceilings", Construction and Building Materials, V. 25, n.º 4, Elsevier, UK, April 2011, pp.

2146-2156 (IF=1.366; IC=0).

21. Sá, M.F.; Gomes, A.M.; Correia, J.R.; Silvestre, N.: “Creep Behavior of Pultruded GFRP Elements – Part 1:

Literature Review and Experimental Study”, Composite Structures, V. 93, n.º 10, Elsevier, UK, September

2011, pp. 2450-2459 (IF = 2.036; NC = 0)

22. Sá, M.F.; Gomes, A.M.; Correia, J.R.; Silvestre, N.: “Creep Behavior of Pultruded GFRP Elements – Part 2:

Analytical Study”, Composite Structures, V. 93, n.º 9, Elsevier, UK, August 2011, pp. 2409-2418 (IF = 2.036;

NC = 0)

23. Silva, A.; Brito, J. de; Gaspar, P.: "Service Life Prediction Model Applied to Natural Stone Wall Claddings

(Directly Adhered to the Substrate)", Construction and Building Materials, V. 25, n.º 9, Elsevier, UK,

September 2011, pp. 3674-3684 (IF=1.366; IC=0).

24. Silva, A.; Dias, J.; Gaspar, P.; Brito, J. de: "Service life prediction models for exterior stone cladding", Building

Research and Information, V. 39, n.º 6, Taylor & Francis, UK, November 2011, pp. 637-653 (IF=1.250;

NC=0).

25. Silva, N.; Camotim, D.; Silvestre, N.; Correia, J.R.; Branco, F.A.: “First-Order, Buckling and Post-Buckling

Behaviour of GFRP Pultruded Beams Part 2: Numerical Simulation”, Computers and Structures, V. 89, n.º 21-

22, Elsevier, UK, November 2011, pp. 2065-2078 (IF=1.722; NC = 1)

26. Silva, P.; Brito, J. de; Costa, J.: "Viability of Two New Mixture Design Methodologies for Self-Consolidating

Concrete", ACI Materials Journal, V. 108, n.º 6, ACI, USA, November 2011, pp. 579-588 (IF=1.023; NC=0).

27. Silvestre, J.; Brito, J. de: "Ceramic Tiling in Building Facades: Inspection and Pathological Characterization

Using an Expert System", Construction and Building Materials, V. 25, n.º 4, Elsevier, UK, April 2011, pp.

1560-1571 (IF=1.366; NC=0).

28. Sousa, V.; Almeida, N.; Meireles, I.; Brito, J. de: "Anomalies in Wall Renders: Overview of the Main Causes of

Degradation", International Journal of Architectural Heritage, V. 5, n.º 2, Taylor & Francis, March / April 2011,

pp. 198-218 (IF=0.500; NC=0).

29. Vieira, J.; Correia, J.; Brito, J. de: "Post-Fire Residual Mechanical Properties of Concrete Made with Recycled

Concrete Coarse Aggregates", Cement and Concrete Research, V. 41, n.º 5, Elsevier, UK, May 2011, pp.

533-541 (IF=2.187; NC=0).


1. Silva, G.; Brito, J. de; Branco, F. A.: "Técnicas de Reabilitação de Pavimentos Comerciais e Industriais",

Construção Magazine, n.º 41, Janeiro / Fevereiro de 2011, Porto, pp. 42-46.


__________________________________________________________________________________________

115

2. Lopes, N.; Brito, J. de: "Limpeza de Revestimentos Exteriores de Coberturas Inclinadas", Construção

Magazine, n.º 42, Março / Abril de 2011, Porto, pp. 29-32.

3. Bravo, M.; Valadares, F.; Brito, J. de: "Betões com Agregados de Borracha de Pneus Usados. Parte I -

Programa Experimental, Apresentação e Análise dos Resultados dos Ensaios aos Agregados e dos Ensaios

ao Betão no Estado Fresco", Betão, n.º 26, Associação Portuguesa das Empresas de Betão Pronto, Lisboa,

Abril de 2011, pp. 40-44.

4. Gonçalves, P.; Brito, J. de: "Recomendações para a Utilização de Agregados Reciclados em Betão", Revista

Portuguesa de Engenharia de Estruturas, n.º 9, II Série, Lisboa, Junho de 2011, pp. 69-74.

5. Correia, J.R.; Branco, F.A.; Ferreira, J.: “Resistência ao fogo de perfis pultrudidos de GFRP”, Revista

Portuguesa de Engenharia de Estruturas, Série II, n.º 9, LNEC, Junho de 2011, pp. 43-55.

6. Paramés, J.; Brito, J. de: "Materiais Nano-Porosos para Soluções de Paramentos Altamente Eficientes",

Construção Magazine, n.º 45, Setembro / Outubro de 2011, Porto, pp. 42-45.

7. Bravo, M.; Valadares, F.; Brito, J. de: "Betões com Agregados de Borracha de Pneus Usados. Parte II -

Apresentação e Análise dos Resultados dos Ensaios aos Agregados e dos Ensaios ao Betão no Estado

Endurecido", Betão, n.º 27, Associação Portuguesa das Empresas de Betão Pronto, Lisboa, Novembro de

2011, pp. 28-37.

8. Paramés, J.; Brito, J. de: "Aplicações Nano Tecnológicas na Construção", Ingenium, n.º 126, Ordem dos

Engenheiros, Lisboa, Novembro / Dezembro de 2011, pp. 76-80.



1. Alves Dias, L.M.; Puiatti, R.: “Auditorias Técnicas de Segurança e Saúde no Trabalho da Construção”,

Revista “Proteção”, Brasil, Julho de 2011, pp. 88-97.

2. Neto, N.; Brito, J. de: "Sistema de Apoio à Inspecção e Diagnóstico de Anomalias em Revestimentos em

Pedra Natural (RPN)", Teoria e Prática na Engenharia Civil, n.º 17, Brasil, Maio de 2011, pp. 9-23.

3. Morgado, F.; Grandão Lopes, J.; Brito, J. de; Feiteira, J.: "Canais de Rega em Portugal: Soluções, Patologia

e Reabilitação", Teoria e Prática na Engenharia Civil, n.º 17, Brasil, Maio de 2011, pp. 33-47.

4. Silva, A.; Brito, J. de; Gaspar, P.: "Aplicação do Método Factorial aos Revestimentos Pétreos com Recurso a

Novas Ferramentas Informáticas", Revista Construlink, V. 9, n.º 27, Lisboa, Junho de 2011, pp. 13-32.

5. Mália, M.; Brito, J. de; Duarte Pinheiro, M.; Bravo, M.: "Indicadores de Resíduos de Construção e Demolição

para Construções Residenciais Novas", Ambiente Construído, V. 11, n.º 3, Brasil, Julho / Setembro de 2011,

pp. 117-130.

6. Neto, N.; Brito, J. de: "Validação de um Sistema de Apoio à Inspecção e Diagnóstico de Anomalias de

Revestimentos em Pedra Natural (RPN)", Teoria e Prática na Engenharia Civil, n.º 18, Brasil, Novembro de

2011, pp. 23-38.

7. Silva, A.; Gaspar, P.; Brito, J. de: "Análise Probabilística da Condição de Degradação dos Revestimentos

Pétreos (Fixados Directamente ao Suporte)", Teoria e Prática na Engenharia Civil, n.º 18, Brasil, Novembro

de 2011, pp. 49-61.


__________________________________________________________________________________________

116

8. Sampaio, A.Z.; Gomes, A.R.; Gomes, A.M., Santos, J.P.; Rosário, D.P.: "Maintenance and construction of

buildings supported on interactive models", IJDST - International Journal of Design Sciences and Technology,

Europia Productions, © europia, V. 18, n.º 1, Paris, France, 2011, pp. 47-63.

9. Saikia, N.; Kojima, T.: "Behaviours of MeCl2 (Me: Pb and Cd) during thermal treatment of kaolin-lime mixture",

African Journal of Environmental Science and Technology, V. 5, n.º 10, Oct. 2011, pp. 778-785.


1. Brito, J. de: "A Revisão e Aprovação de Projectos de Estruturas", Construir, n.º 191, Ano VII, Lisboa,

Fevereiro de 2011, pp. ENG14-15.

2. Brito, J. de; Sá, J.; Sá, G.: "Durabilidade nos Materiais e Obras: Um Sistema Pericial para Rebocos",

Materiais de Construção, n.º 157, Lisboa, Outubro de 2011, pp. 40-48.

3. Gonçalves, A.; Ferreira, J.; Guerreiro, L.; Branco, F.: “Avaliação Experimental do Comportamento de Paredes

de Edifícios Pombalinos ", RIC – Revista Internacional Construlink, V. 9, n.º 27, Junho de 2011, pp. 52-65.



1. Almeida, N.; Alves Dias, L.M.; Branco, F.; Sousa, V.: “Gestão Técnica de Edifícios Baseada no Desempenho

e no Risco: Conceito e Aplicação Prática”, Encuentro Latino-Americano de Gestión y Economía de la

Construction, IV ELAGEC, Santiago, Chile, 2011.

2. Gaspar, S.; Silva, C.M.; Flores-Colen, I.: “Analyses of the interface between wall elements and its render”,

International Conference on Building Materials and Components (XII DBMC), Porto, Portugal, 12 April – 15

April 2011.

3. Silvestre, J.; Brito, J. de; Duarte Pinheiro, M.: "Life-Cycle Assessment of Thermal Insulation Materials for

External Walls of Buildings", International Conference of Constructions - Towards a Better Built Environment,

Innsbruck, February 2011, pp. 303-310.

4. Dhir, R.; Paine, K.; Ho, N.; Poon, C.S.; Etxeberria, M.; Brito, J. de; Tam, V.: "Use of Recycled and Secondary

Aggregates in Concrete: An Overview", UKPERI Concrete Congress: Concrete for 21st Century Construction,

New Delhi, March 2011, pp. 157-182.

5. Gaspar, P.; Brito, J. de: "The Perception of Damage on Rendered Façades", 12th DBMC International

Conference on Durability of Building Materials and Components, Porto, April 2011, pp. 1037-1044.

6. Margalha, G.; Santos Silva, A.; Veiga, R.; Brito, J. de: "The Influence of Slaking Time on Lime Putty", 12th

DBMC International Conference on Durability of Building Materials and Components, Porto, April 2011, pp.

697-704.

7. Edis, E.; Flores-Colen, I.; Brito, J. de: "Effect of the Inspection Conditions of the In-Situ Infrared

Thermographic Examination of Façades with Adhered Ceramic Cladding", 12th DBMC International


8. Galvão, J.; Flores-Colen, I.; Brito, J. de: "In-Situ Testing to Evaluate the Mechanical Performance of

Rendered Façades - Rebound Hammer and Ultrasound Techniques", 12th DBMC International Conference

on Durability of Building Materials and Components, Porto, April 2011, pp. 991-999.


__________________________________________________________________________________________

117

9. Duarte, R.; Flores-Colen, I.; Brito, J. de: "In-Situ Testing Techniques for In-Service Evaluation of Water

Penetration in Rendered Façades - The Portable Moisture Meter and Karsten Tube", 12th DBMC International


10. Henriques, D.; Nunes, L.; Saporiti Machado, J.; Brito, J. de: "Timber in Buildings: Estimation of Some

Properties Using Pilodyn and Resistograph", 12th DBMC International Conference on Durability of Building

Materials and Components, Porto, April 2011, pp. 949-956.

11. Vilhena, A.; Pedro, J.; Brito, J. de: "Comparison of Methods Used in European Countries to Assess Buildings’

Condition", 12th DBMC International Conference on Durability of Building Materials and Components, Porto,

April 2011, pp. 1267-1273.

12. Freire, T.; Veiga, R.; Santos Silva, A.; Brito, J. de: "Improving the Durability of Portuguese Historical Gypsum

Plasters Using Compatible Restoration Products", 12th DBMC International Conference on Durability of

Building Materials and Components, Porto, April 2011, pp. 905-913.

13. Raposo, S.; Fonseca, M.; Brito, J. de: "Planned Preventive Maintenance Activities: Analysis of Guidance

Documents", 12th DBMC International Conference on Durability of Building Materials and Components,

Porto, April 2011, pp. 1257-1264.

14. Paulo, P.; Branco, F. A.; Brito, J. de; Garrido, M.: "Dirt Collection Extension in Building Façades", 12th DBMC

International Conference on Durability of Building Materials and Components, Porto, April 2011, pp. 1341-1349.

15. Paulo, P.; Branco, F. A.; Brito, J. de: "Deterministic and Stochastic Prediction Models in BuildingsLife

Platform", 12th DBMC International Conference on Durability of Building Materials and Components, Porto,

April 2011, pp. 589-597.

16. Martins, M.; Nunes, L.; Branco, F.A.: “Plastering and Rendering mortars incorporating regranulated of

expanded cork to improve durability”. 12DBMC – International Conference on Durability of Building Materials

and Components, Porto 2011.

17. Henriques, D.; Nunes, L.; Brito, J. de: "Performance of Paraloid B72® Combined with the Application of

Biocides on Wood Degraded by Fungi", 4th International Conference of Cost Action IE0601, Izmir, Turkey,

April 2011.

18. Serpa, D.; Santos Silva, A.; Santos, M.; Brito, J. de: "Behaviour of Glass in Cement-Based Materials: Its Role

on ASR", IV International Materials Symposium (Materiais 2011), Guimarães, April 2011.

19. Henriques, D.; Nunes, L.; Brito, J. de: "Conservação de Madeira Degradada em Edifícios com Base em

Resinas Sintéticas", CIMAD’ 11 (1º Congresso Ibero-Latino-americano da Madeira na Construção), FCTUC,

Coimbra, June 2011.

20. Henriques, D.; Nunes, L.; Brito, J. de: "An Experimental Approach to the Treatment and Consolidation of

Degraded Timber Elements from a XIX Century Building", International Conference on Structural Health

Assessment of Timber Structures (SHATIS’11), Lisboa, June 2011.

21. Brito, J. de; Lopes, R.: "Betão: Um Fim-de-Vida Ecológico para Resíduos Industriais", 6º Congresso Luso-

Moçambicano de Engenharia (CLME’2011), Maputo, August / September 2011, artigo 1410A.

22. Branco, F.A.; Brito, J. de; Ferreira, J.: "Projectar Pontes para uma Vida Útil de 120 Anos", 6º Congresso

Luso-Moçambicano de Engenharia (CLME’2011), Maputo, August / September 2011, artigo 1409A.


__________________________________________________________________________________________

118

23. Silvestre, J.; Brito, J. de; Duarte Pinheiro, M.: "Environmental, Energetic and Economic Life-Cycle

Assessment from ‘Cradle to Cradle’ (3E-C2C) of Building Assemblies", SB11 Helsinki: World Sustainable

Building Conference, Helsinki, October 2011.

24. Rodrigues, F.; Carvalho, T.; Pereira, M.; Evangelista, L.; Brito, J. de: "Physical and Chemical-Mineralogical

Characterization of Fine Recycled Aggregates from Construction and Demolition Waste", Fray International

Symposium, Cancun, November / December 2011.

25. Dutu, A.; Ferreira, J.; Nicolae, V.: " Numerical analysis of timber framed masonry buildings under seismic

actions ", 2nd WTA International PhD Symposium, Brno, Czech Republic , 6-7 October 2011.

26. Ferreira, J.; Gonçalves, Ana; Guerreiro, L., Branco, F.: “Evaluation of the behavior of ‘pombaline’ buildings’

walls (Avaliação do comportamento de paredes em edifícios pombalinos)”, 6º Congresso Luso-Moçambicano

de Engenharia, Maputo, August-September 2011.

27. Dutu, A.; Ferreira, J.; Sandu, C.: “Seismic Risk Management of Civil Buildings in Romania Based on the

Incremental Seismic Rehabilitation Concept”, 18th Annual Conference of The International Emergency

Management Society - TIEMS 2011, Bucharest, Romania, 7-10 June 2011.

28. Branco, F.: “O Projecto de Pontes para Vidas Superiores a 100 anos” Proc. COMPAT11, 2011, Antiqua,

Guatemala, 2011 (keynote).

29. Firmo, J.P.; Correia, J.R.; França, P.; Cabral-Fonseca, S.:“Fire protection systems for reinforced concrete

beams strengthened with CFRP laminates”, 16th International Conference on Composite Structures (ICCS

16), (CD-ROM), Porto, June 2011.

30. Matos, B.; Correia, J.R.: “Structural response of hyperstatic concrete beams reinforced with GFRP bars:

effect of increasing concrete confinement”, 16th International Conference on Composite Structures (ICCS

16), (CD-ROM), Porto, June 2011.

31. Gomes, M.; Correia, J.R.; Branco, F.A.: “Tensile and compressive properties of GFRP pultruded profiles at

elevated temperature”, 16th International Conference on Composite Structures (ICCS 16), (CD-ROM), Porto,

June 2011.

32. Gonilha, J.; Aquino, A.; Correia, J.R.; Branco, F.A.; Barros, J.: “Evaluation of the dynamic behavior of a

GFRP-SFRSCC hybrid footbridge”, 16th International Conference on Composite Structures (ICCS 16), (CD-

ROM), Porto, June 2011.

33. Correia, J.R.; Branco, F.A.; Gonilha, J.A.; Ferreira, D.; Reis, L.: “GFRP sandwich panels for civil engineering

structural applications”, 5th International Conference on Advanced Computational Engineering and

Experimenting (ACE-X2011), (CD-ROM, paper 126, pages 50-51), Vilamoura, July 2011.

34. Correia, J.R.; Branco, F.A.; Matos, B.: “Structures without corrosion: GFRP profiles and rebars”, 6th

Portuguese-Mozambican Engineering Conference, Maputo, August/September 2011.

35. Correia, J.R.; Branco, F.A.; Gonilha, J.A.: “Experimental and numerical investigations on a GFRP- SFRSCC

hybrid footbridge”, IABSE-IASS Symposium Taller, Longer, Lighter, (CD-Rom), London, UK, September 2011.

36. Sampaio, A.Z.; Gomes, A.M.; Gomes, A.R.; Rosário; D.P.: “Building maintenance activity supported in virtual

interactive models: façades and interior walls” XII DBMC – 12th International Conference on Building

Materials and Components, 12 - 15 April 2011, Porto, Portugal, FEUP edições, Colecções. Colectâneas. 20,

ISBN 978-972-752-132-6, ed. Vasco P. Freitas, Helena Corvacho, Michael Lacasse, Vol. 4, pp. 2177-2184.


__________________________________________________________________________________________

119

37. Sampaio, A.Z.; Gomes, A.M.; Gomes, A.R.; Rosário; D.P.: “Virtual Reality technology used to support the

buildings inspection activity” MMEDIA 2011 - The Third International Conferences on Advances in

Multimedia, Editors: Dumitru Dan Burdescu, University of Craiova, Romania, Philip Davies, Bournemouth and

Poole College, UK, David Newell, Bournemouth University, UK, April 17-22, 2011, Budapest, Hungary, pp.

80-86. ISBN: 978-1-61208-005-5, copyright (c) IARIA, 2011.

38. Sampaio, A.Z.; Gomes, A.R.; Gomes, A.M.; Santos, J.P.; Rosário; D.P.: “Collaborative maintenance and

construction of buildings supported on virtual interactive models” EuropIA - 13th International Conference on

Advances in Design Sciences and Technology, June 8-10, 2011, Rome, Italy. Ed. Gianfranco Carrara,

António Fioravanti, Armando Trento, Sapienza University of Rome, Dipartimento de Ingegneria Civile, Edile e

Ambientale. ISBN: 979-1-090094-05-5, Europia productions, 2011, pp. 67-82.


construction of buildings supported on Virtual Reality technology” CISTI'2011 - 6ª Conferência Ibérica de

Sistemas e Tecnologias de Informação, ed. Álvaro Rocha, Ramiro Gonçalves, Manel Perez Cota, Luís Paulo

Reis, ISBN: 978-989-96247-5-7, Chaves, Portugal, 15 - 18 Junho, 2011, pp. 33-36.

40. Sampaio, A.Z.; Gomes, A.M.; Gomes, A.R.; Rosário; D.P.: “Interactive virtual model as a support to the

maintenance activity of buildings”, EG-ICE European Group for Intelligent Computing in Engineering,

Workshop 2011, 6-8, July 2011 Twente University, The Netherlands. Proceedings of the 2011 eg-ice

Workshop, Editors: Timo Hartmann, Pieter de Wilde, and Yaqub Rafiq, ISBN: 978-90-365-3216-7, ID: 26

41. Sampaio, A.Z.; Gomes, A.R.; Gomes, A.M.: “Maintenance and inspection of façades of building supported on

Virtual Reality technology”, eCAADe 2011 - Education and Research in Computer Aided Architectural Design

in Europe, (Eds.) Tadeja Zupancic, Matevz Juvancic, Spela Verovsek, Anja Jutraz, University of Ljubljana,

Faculty of Architecture, Slovenia, 1st Edition, Ljubljana (Slovenia), 21-24 September, 2011. pp. 332-338.

ISBN 978-9-4912070-1-3 Copyright © 2011.

42. Sampaio, A.Z.; Gomes, A.M.; Gomes, A.R.; Rosário, D.P.: “Maintenance of buildings supported in interactive

models: Interior and exterior walls”, CENTERIS’2011 - International Conference on ENTERprise Information

Systems, Vilamoura, Algarve, Portugal, October 5-7, 2011, extended abstract pp. 19, CD rom ISBN 978-989-

07433-0-4.

43. Neves e Sousa, A.; Gibbs, B.M.: “Low frequency sound transmission through homogeneous floors and

floating floors”, 18th International Congress on Sound and Vibration - ICSV18, Rio de Janeiro, Brazil, 10-14

July 2011.

44. Neves e Sousa, A.; Cabeças A.: “Extending EN 12354-2 to low frequencies”, 18th International Congress on

Sound and Vibration - ICSV18, Rio de Janeiro, Brazil, 10-14 July 2011.

45. Balsa, N.; Paulo, P.; Branco, F.: “E-procurement in Portugal - A Case Study”. EU Workshop: Fiction or

reality? 50% of public procurement above the EU public procurement threshold should be carried out

electronically, Vienna, Austria, March 2011.

46. Silva, L.; Flores-Colen, I.; Vieira, N.; Timmons, A. B..: "Natural ageing tests to study in-service water

resistance of pre-mixed one-coat rendered walls with hydrophobic agents”, 12th DBMC International

Conference on Durability of Building Materials and Components, Porto, April 2011.

47. Loforte Ribeiro, F.; Neves, A. “Agilidade e Lean Construction no Planeamento de Projectos”, Proceedings of

CLME/IIICEM 2011, Ref: CLME’2011_1001A, Maputo, Mozambique.


__________________________________________________________________________________________

120

48. Loforte Ribeiro, F.; Venancio, A.. "Integração de Lean Construction e Clean Production na Construção de

Edifícios”, Proceedings of CLME/IIICEM 2011, Ref: CLME’2011_0901A, Maputo, Mozambique.

49. Grilo, I.; Branco, F.; Júlio, E.: "Protecção Face a Altas Temperaturas de Elementos Reforçados com FRP

com Recurso a Argamassas", CILASCI 1 – 1.º Congresso Ibero-Latino-Americano em Segurança Contra

Incêndios, Natal, Brazil, 11-13 March 2011.


1. Brito, J. de; Grandão Lopes, J.; Morgado, F.: "Impermeabilização de Canais de Rega em Portugal", Primeiras

Jornadas Técnicas de Impermeabilização “Modernizar e Inovar”, LNEC, Lisboa, Março de 2011.

2. Brito, J. de; Júlio, E.: "Levantamento e Caracterização de Patologia Exterior de Construções Edificadas em

Portugal entre 1970 e 1995. Dois Casos de Estudos", Semana de Tecnologia e Design, Escola Superior de

Tecnologia e Gestão, Instituto Politécnico de Portalegre, Portalegre, Abril de 2011.

3. Brito, J. de; Veiga, R.: "Gestão de Resíduos (RCD) - Utilização em Argamassas", 1ª Conferência da

Construção e Reabilitação Sustentável de Edifícios no Espaço Lusófono, UNL, Lisboa, Maio de 2011.

4. Silvestre, J.; Brito, J. de; Duarte Pinheiro, M.: "Avaliação do Ciclo de Vida “do Berço ao Berço”: Aplicação a

Paredes Exteriores de Edifícios", Seminário “Avaliação do Ciclo de Vida na Construção”, Guimarães, Maio de

2011.

5. Silvestre, J.; Brito, J. de; Duarte Pinheiro, M.: "Catálogo de Produtos Sustentáveis Segundo o Sistema

LiderA: Critérios para Materiais de Isolamento", Congresso LiderA 2011, IST, Lisboa, Maio de 2011.

6. Brito, J. de: "Os Custos de Rotura Funcional nas Análises LCC de Pontes Rodoviárias", Sessão Especial

sobre “Pontes Existentes: Reabilitar ou Renovar?”, 2º Congresso sobre Segurança e Observação de Pontes,

ASCP, Lisboa, Junho de 2011, pp. 259-273.

7. Almeida, J.; Cruz, P.; Brito, J. de: "Modelos de Previsão da Deterioração de Tabuleiros de Pontes de Betão

Armado", 2º Congresso sobre Segurança e Observação de Pontes, ASCP, Lisboa, Junho de 2011, pp. 451-460.

8. Brito, J. de: "Edifícios Balanço Zero", Workshop “Edifícios Balanço Zero - Rumo ao Impacte Nulo da

Construção e Reabilitação nas Cidades”, Lisboa, Novembro de 2011.

9. Brito, J. de: "Sistemas Periciais de Inspecção e Diagnóstico de Edifícios - Balanço de Trabalhos de

Investigação em Curso", 2º Workshop do CIB Student Chapter do DECivil - A Sustentabilidade e o Ciclo de

Vida das Construções, Lisboa, Novembro de 2011.

10. Silvestre, J.; Flores-Colen, I.; Brito, J. de: "CIB Student Chapter do DECivil do Instituto Superior Técnico - 7

Anos de Actividade. RG1 ‘Vida Útil das Construções’", 2º Workshop do CIB Student Chapter do DECivil - A

Sustentabilidade e o Ciclo de Vida das Construções, Lisboa, Novembro de 2011.

11. Silvestre, J.; Flores-Colen, I.; Brito, J. de: "CIB Student Chapter do DECivil do Instituto Superior Técnico - 7

Anos de Actividade. RG2 ‘Sustentabilidade da Construção’", 2º Workshop do CIB Student Chapter do DECivil

- A Sustentabilidade e o Ciclo de Vida das Construções, Lisboa, Novembro de 2011.

12. Teodoro, N.F.; Henriques, P.G.: ”Contribuição para Sustentabilidade na Construção Civil: Reciclagem e

Reutilização de Materiais”, iiSBE, 1ª Conferência, Sustentabilidade na Reabilitação Urbana, Lisboa Set,

2011, pp. 127-134. ISBN: 978-989-96543-2-7.


__________________________________________________________________________________________

121

13. Neves, S.C.; Henriques, P.G.,” O Contributo de sistemas construtivos no desempenho da sustentabilidade na

construção”, iiSBE, 1ª Conferência, Sustentabilidade na Reabilitação Urbana, Lisboa Set, 2011, pp. 225-232.

ISBN: 978-989-96543-2-7.

14. Correia, J.R.; Sá, M.; Gonilha, J.; Almeida, I.; Branco, F.; Garrido, M.: “Pontes em Plásticos Reforçados com Fibras

(FRP) e em Betão-FRP”, 1ªs Jornadas Materiais na Construção, FEUP, Porto, Abril de 2011, pp 115-148.

15. Sampaio, A.Z.; Gomes, A.M.; Gomes, A.R.; Santos, J.: “Planeamento da construção e manutenção de

fachadas de edifícios apoiados na tecnologia de Realidade Virtual” CMNE 2011 Congresso de Métodos

Numéricos em Engenharia. Sessão temática de Processamento de imagem e visualização, Organizadores:

João Manuel R. S. Tavares e Xavier Roca, Coimbra, Portugal, de 14 a 17 de Junho de 2011. Publicação

APMTAC. Ed. António Tadeu, Isabel Narra Figueiredo, Luís Filipe Menezes, CDrom- 10pgs, artigo ID 32.

16. Flores-Colen, I.; Magalhães, A. C.; Veiga, R.: “Técnicas de ensaio para a avaliação do desempenho de

argamassas de revestimento aplicadas em paredes correntes e antigas”, IX SBTA – Simpósio Brasileiro de

Tecnologia de Argamassas, Belo Horizonte, Brasil, Maio 2011.

17. Flores-Colen, I.: "Desempenho em serviço de rebocos exteriores na óptica da manutenção", 2º Workshop do

CIB Student Chapter do DECivil - A Sustentabilidade e o Ciclo de Vida das Construções, Lisboa, Novembro

de 2011.


A.1 Entire books

A.2 Chapters

1. Sampaio, A.Z.; Gomes, A.R.: Chapter “Virtual Reality technology as a support to the maintenance activity of

buildings” book: Innovative developments in virtual and physical prototyping , 2011, ed. P.J. Bártolo et al.,

published by Taylor & Francis. ISBN:978-0-415-68418-7, pp. 661-666.

A.3 As editor


1. Rodrigues, F.; Evangelista, L.; Brito, J. de: "Tarefa 2: Desenvolvimento de uma Metodologia para a

Determinação da Densidade e Absorção de Água de Agregados Finos Reciclados", integrado no Projecto

PTDC / ECM / 108682 / 2008 “Desempenho Mecânico e de Durabilidade de Betões Produzidos com

Agregados Finos Reciclados Obtidos a Partir de Resíduos da Construção e Demolição de Centrais de

Reciclagem Portuguesas”, Relatório ICIST, DTC 01/11, Lisboa, Fevereiro de 2011.

2. Rodrigues, F.; Bravo, M.; F.; Evangelista, L.; Brito, J. de: "Tarefa 1: Estado da Arte sobre a Utilização de

Agregados Finos Reciclados na Produção de Betões", integrado no Projecto PTDC / ECM / 108682 / 2008

“Desempenho Mecânico e de Durabilidade de Betões Produzidos com Agregados Finos Reciclados Obtidos

a Partir de Resíduos da Construção e Demolição de Centrais de Reciclagem Portuguesas”, Relatório ICIST,

DTC 02/11, Lisboa, Março de 2011.

3. Rodrigues, Carvalho, T.; F.; Brito, J. de; Evangelista, L.: "Tarefa 3: Caracterização de Agregados Finos

Reciclados Provenientes de Centrais de Reciclagem Portuguesas de Resíduos de Construção e Demolição.


__________________________________________________________________________________________

122

Levantamento das Quantidades de RCD Processados em Portugal e Descrição das Centrais de

Reciclagem", integrado no Projecto PTDC / ECM / 108682 / 2008 “Desempenho Mecânico e de Durabilidade

de Betões Produzidos com Agregados Finos Reciclados Obtidos a Partir de Resíduos da Construção e

Demolição de Centrais de Reciclagem Portuguesas”, Relatório ICIST, DTC 14/11, Lisboa, Maio de 2011.

4. Rodrigues, Carvalho, T.; F.; Brito, J. de; Evangelista, L.: "Tarefa 3: Caracterização de Agregados Finos

Reciclados Provenientes de Centrais de Reciclagem Portuguesas de Resíduos de Construção e Demolição.

Apresentação dos Resultados Experimentais", integrado no Projecto PTDC / ECM / 108682 / 2008

“Desempenho Mecânico e de Durabilidade de Betões Produzidos com Agregados Finos Reciclados Obtidos

a Partir de Resíduos da Construção e Demolição de Centrais de Reciclagem Portuguesas”, Relatório ICIST,

DTC 16/11, Lisboa, Julho de 2011.

5. Edis, E.; Brito, J. de; Flores-Colen, I.: "Diagnosis of Exterior Wall Failures by In-Situ Inspection Techniques -

Inspection of Facades with Adhered Ceramic Cladding", Relatório ICIST, DTC/11, Lisboa, Dezembro de 2011.

6. Garrido, M.; Correia, J.R.; Branco, F.A.: “Preliminary Structural Design of GFRP Sandwich Panels for

Applications in Building Floors”, integrado no Projecto PTDC/ECM/113041/2009 “Rehabilitation of Building

Floors with Lightweight High Performance GFRP Sandwich Panels”, Relatório ICIST DTC nº 17/2011,

Novembro de 2011.


1. Branco, F.; Ferreira, J.: “Peritagem às Patologias da Pintura da Carenagem do Viaduto do Sistema

Automático de Transporte Urbano – SATU, em Oeiras (FUNDEC)”. Relatório ICIST - EP nº 4/11.

2. Branco, F.; Ferreira, J.: “Peritagem a Anomalias Estruturais no Edifício Rodrigo Uría, em Lisboa (FUNDEC)”.

Relatório ICIST - EP nº 5/11.

3. Branco, F.; Correia, J.: “Peritagem a Anomalias Estruturais numa Vivenda na Rua António Medina Júnior, nº

39, em Sintra”, Estudo realizado para Maria do Carmo Pereira (FUNDEC), Relatório ICIST EP nº 07/2011,

Abril de 2011.

4. Branco, F.: “Peritagem às Anomalias do Condomínio das Laranjeiras - CONFIDENCIAL (FUNDEC)”.


5. Branco, F.: “Peritagem às Anomalias de Vibração num Edifício nas Olaias, Lisboa (FUNDEC)”. Relatório

ICIST - EP nº 9/11.

6. Branco, F.: “Pintura da Fachada Poente do Edifício da CGD na Av. 5 de Outubro (FUNDEC)”. Relatório

ICIST - EP nº 10/11.

7. Branco, F.; Correia, J.: “Transportes Especiais (FUNDEC)”. Relatório ICIST - EP nº 11/11.

8. Branco, F.; Ferreira, J.: “Peritagem a Anomalias de Infiltrações numa Moradia em Soltroia (FUNDEC)”.


9. Camotim, D.; Silvestre, N.; Correia, J.R.: “Sistema Estrutural TRUSSKIT”, Estudo realizado para Barraferros

(FUNDEC), Relatório ICIST EP nº 13/2011, Maio de 2011.

10. Branco, F.; Ferreira, J.: “Ensaios de Arrancamento em Parafusos de Fixação da Estrutura de Suporte de

Páineis Fenólicos de Fachada na Escola Pedro de Santarém (FUNDEC)”. Relatório ICIST - EP nº 14/11.


__________________________________________________________________________________________

123

11. Branco, F.: “Peritagem a Anomalias de Humidades no Empreendimento Hibiscus Gardens Carvoeiro,

Algarve (FUNDEC)”. Relatório ICIST - EP nº 16/11.

12. Branco, F.; de Brito, J.: “Peritagem à Quantificação dos Trabalhos de Demolição e Escavação na Central de

Alto de Mira da REN (FUNDEC)”. Relatório ICIST - EP nº 17/11.

13. Branco, F.: “Inspecção nº 9 aos Painéis de Fachada do Edifício da CGD na Avª 5 de Outubro (FUNDEC)”.


14. Branco, F.: “Parecer sobre a Reparação dos Recobrimentos Deficientes nas Vigas da PI9A/PS9 e PS11A

(IP4) (FUNDEC)”. Relatório ICIST - EP nº 19/11.

15. Branco, F.; Azevedo, J.; Ferreira, J.: “Peritagem a Anomalias em Edifícios da Quinta de Santo António em

Miraflores”. Relatório ICIST - EP nº 20/11.

16. Ferreira, J.; Branco, F.: “Peritagem a Anomalias do Edifício 2 (Oeste) do Observatório Astronómico de Lisboa

(FUNDEC)”. Relatório ICIST - EP nº 21/11.

17. Branco, F.; Ferreira, J.: “Peritagem às Patologias da Plataforma ECHO do Aeroporto da Portela (FUNDEC)”.


18. de Brito, J.; Bogas, J.A.: “Aplicação de Azulejos de Pasta Branca em Fachadas Exteriores”. Relatório ICIST -

EP nº 24/11.

19. Branco, F.; Ferreira, J.; Correia, J.: “Ensaios de Carga Estáticos e Dinâmicos realizados no Viaduto V01 do

lanço 3.1 “Ribeira Funda (FUNDEC)”. Relatório ICIST - EP nº 28/11.

20. Branco, F.; Ferreira, J.; Correia, J.: “Ensaios de Carga Estáticos e Dinâmicos realizados no Viaduto V03

(FUNDEC)”. Relatório ICIST - EP nº 29/11.


Lanço 3.1 “Salga” (FUNDEC)”. Relatório ICIST - EP nº 30/11.


Lanço 3.2 “Espigão” (FUNDEC)”. Relatório ICIST - EP nº 31/11.


Lanço 3.2 “Despe-te que Suas” (FUNDEC)”. Relatório ICIST - EP nº 32/11.


Lanço 1.5-1.6 (FUNDEC)”. Relatório ICIST - EP nº 33/11.


Lanço 3.1 “Caldeirões” (FUNDEC)”. Relatório ICIST - EP nº 34/11.


Lanço 1.5-1.6 (FUNDEC)”. Relatório ICIST - EP nº 35/11.


Lanço 1.5-1.6 “Viaduto de Três Voltas” (FUNDEC)”. Relatório ICIST - EP nº 36/11.


Lanço 3.1 “Achada” (FUNDEC)”. Relatório ICIST - EP nº 37/11.


__________________________________________________________________________________________

124




Fernando Branco Associate Editor and founder of ALCONPAT – Revista Latinoamericana de

Control de Calidad, Patologia y Recuperacón de las Construcciones

Fernando Branco Structure and Infrastructure Engineering – Maintenance, Management,

Lifecycle Design and Performance

Fernando Branco Rehabilitation Section of the Journal of Structural Control and Health Monitoring

Fernando Branco Scientific Research and Essays – Academic Journals

Fernando Branco Revista Internacional Construlink - Estruturas e Construção

Jorge de Brito Revista Ingeniería de Construcción

Jorge de Brito Cuaderno Iberoamericano de la Construcción

Jorge de Brito Cadernos de Obra


Researcher Journal – National

João Ferreira Mecânica Experimental

Albano Neves e Sousa Construção Magazine




Jorge de Brito 1º Congresso Ibero - Latino-americano da Madeira na Construção (CIMAD 11), FCTUC, Coimbra, 2011

Scientific Committee member

Jorge de Brito International Conference on Durability of Building Materials and Components (12th DBMC), Porto, 2011

Scientific Committee member; Stream Chair for session T13 (Natural and accelerated ageing tests)

Jorge de Brito Sustainable Intelligent Manufacturing (SIM), FCTUC, 2011


Jorge de Brito 4º Encontro Nacional sobre Patologia e Reabilitação de Edifícios - PATORREB 2012, Santiago de Compostela, 2012


Jorge de Brito Thirteenth International Conference on Civil, Structural and Environmental Engineering Computing (CC2011); Crete, 2011


João Ferreira 6º Congresso Luso-Moçambicano de Scientific Committee member


__________________________________________________________________________________________

125

Engenharia, Maputo, August-September 2011

Fernando Branco Footbridge 2011, Wroclaw Scientific Committee member

Fernando Branco CC2011 - Thirteenth International Conference on Civil, Structural and Environmental Engineering Computing, Chania 2011


Fernando Branco IABSE Symposium 2012, Seoul Scientific Committee member

Fernando Branco 15th International Conference on Experimental Mechanics. Porto, 2012


Fernando Branco IABMAS 12 – 6th International Conference on Bridge Maintenance, Safety and Management, Como, 2012


Fernando Branco 23rd Czech and Slovak international conference “Steel Structures and Bridges”, High Tatras, Slovakia, 2012


Fernando Branco Conference on Computational Structures Technology Dubrovnik, Croatia, 2012


Fernando Branco ICSA2013 - International Conference on Structures and Architecture, Guimarães., 2013


Fernando Branco Seventh International Conference on Concrete under Severe Conditions, Nanjing, China, 2013


João Correia 6th International Conference on Advanced Computational Engineering and Experimenting - ACE-X2012, Instambul, Turkey, 1-4 July 2012


Albano Neves e Sousa VII Iberian Acoustics Congress Scientific Committee member

Inês Flores-Colen EFMC 2012 – European Facility Management Conference, 23 to 25 May, 2012, Copenhagen, Denmark





Jorge de Brito Segundo Congresso Nacional sobre Segurança e Conservação de Pontes, FCTUC, Coimbra, 2011

Scientific Commission member

Jorge de Brito Fórum Internacional de Gestão da Construção - GESCON 2011, FEUP, Porto, 2011


Jorge de Brito Congresso Nacional da Construção (Construção 2012), FCTUC, Coimbra, 2012



__________________________________________________________________________________________

126

Jorge de Brito Terceiro Congresso Nacional sobre Segurança e Conservação de Pontes, FEUP, Porto, 2012


Fernando Branco Segundo Congresso Nacional sobre Segurança e Conservação de Pontes, Coimbra 2011


Fernando Branco Fórum Internacional de Gestão da Construção - GESCON 2011 – FEUP 2011


A.P. Ferreira Pinto 4º Congresso Nacional de Argamassas de Construção





Jorge de Brito CIB W86 Building Pathology

Jorge de Brito CEN/TC124/WG2 Timber Structures / Solid Timber

Jorge de Brito CIB W115 Construction Materials Stewardship

José Dinis Silvestre CIB W80 Prediction of Service Life of Building Materials and Components

Fernando Branco ECCE Standing Committee EU Directive on professional Mobility

João Ramôa Correia CIB W14 Fire

Inês Flores-Colen CIB W86 Building Pathology

Inês Flores-Colen CIB W70 Facilities Management and Asset Maintenance

Albano Neves e Sousa CEN/TC 126 (Acoustic properties of building elements and of buildings) – WG7

Laboratory measurement of noise from waste water installations

Albano Neves e Sousa CIB W051 Acoustics




Jorge de Brito CEN CT14/SC4 Timber / Structural Timber

Jorge de Brito CEN CT115 Structural Codes

Jorge de Brito CEN CT154 Aggregates

Jorge de Brito CEN CT171 Construction Sustainability

José Dinis Silvestre CEN CT171 Construction Sustainability

João Ferreira CEN CT14/SC4 Timber / Structural Timber


__________________________________________________________________________________________

127

Fernando Branco CEN CT 121 Precast Elements

Fernando Branco CT 115 Coordination of Eurocodes in Portugal

Fernando Branco Reg Qual OE Admission code for Engineers Chamber

Augusto Gomes CEN CT-104 Concrete

A.P. Ferreira Pinto CEN CT-104 Concrete

Albano Neves e Sousa CT 28 (Acoustics, Vibration and Shock) –SC 2

Building Acoustics

Albano Neves e Sousa CT 28 (Acoustics, Vibration and Shock) –SC 4

Vibration and Shock




Event Notes

João Ferreira 6º Congresso Luso-Moçambicano de Engenharia, Maputo, August-September 2011

Organizing Commission member

Fernando Branco ECCE International Meeting, Malta Organizing Commission

Fernando Branco ECCE International Meeting, Antalya Organizing Commission

Fernando Branco Engineers Day, Brussels Organizing Commission

Fernando Branco 6º Congresso Luso-Moçambicano de Engenharia, Maputo, August-September 2011

Organizing Commission

João Ramôa Correia 5th International Conference on Advanced Computational Engineering and Experimenting

Local Committee

A.2 National events


Event Notes

José Dinis Silvestre 2º Workshop do CIB Student Chapter do DECivil - A Sustentabilidade e o Ciclo de Vida das Construções, Lisboa, Novembro de 2011

Member of the Organizing Committee

Fernando Branco CONSTRUÇÃO 2012 Organizing Committee


__________________________________________________________________________________________

128




Date

Jorge de Brito International Conference of Constructions - Towards a Better Built Environment

Innsbruck, Austria

February 2011

Jorge de Brito UKPERI Concrete Congress: Concrete for 21st Century Construction

New Delhi, India

March 2011

Jorge de Brito 12th DBMC International Conference on Durability of Building Materials and Components

Porto, Portugal April 2011

Jorge de Brito 4th International Conference of Cost Action IE0601

Izmir, Turkey April 2011

Jorge de Brito IV International Materials Symposium (Materiais 2011)

Guimarães, Portugal

April 2011

Jorge de Brito CIMAD’ 11 (1º Congresso Ibero-Latino-americano da Madeira na Construção)

Coimbra, Portugal

June 2011

Jorge de Brito International Conference on Structural Health Assessment of Timber Structures (SHATIS’11)

Lisboa, Portugal

June 2011

Jorge de Brito 6º Congresso Luso-Moçambicano de Engenharia (CLME’2011)

Maputo, Mozambique

August / September 2011

Jorge de Brito SB11 Helsinki: World Sustainable Building Conference

Helsinki, Finland

October 2011

Jorge de Brito Fray International Symposium Cancun, Mexico

November / December 2011

José Dinis Silvestre Cost C25 - International Conference of Constructions - Towards a Better Built Environment

Innsbruck, Austria

February 2011

José Dinis Silvestre SB11 Helsinki: World Sustainable Building Conference

Helsinki, Finland

October 2011

João Ferreira 6º Congresso Luso-Moçambicano de Engenharia, Maputo, August-September 2011

Maputo, Mozambique

29 Aug-3 Sep

João Ferreira 2nd WTA International PhD Symposium Brno, Czech Republic

6-7 October

João Ferreira 18th Annual Conference of The International Emergency Management Society - TIEMS 2011

Bucharest, Romania

7-10 June

Fernando Branco ECCE International Meeting, Malta La Valetta, Malta

May

Fernando Branco ECCE International Meeting, Antalya Antalya, Turkey

October


__________________________________________________________________________________________

129

Fernando Branco Engineers Day, Brussels Brussels, Belgium

December

Fernando Branco 6º Congresso Luso-Moçambicano de Engenharia, Maputo, August-September 2011

Maputo, Mozambique

August

Fernando Branco International Conference CONPAT 2011, Antigua

Antigua, Guatemala

September

João Ramôa Correia IABSE-IASS Symposium Taller, Longer, Lighter

London, UK September

João Ramôa Correia 6th Portuguese-Mozambican Engineering Conference

Maputo, Mozambique

August

João Ramôa Correia 5th International Conference on Advanced Computational Engineering and Experimenting (ACE-X2011)

Vilamoura, Portugal

July

João Ramôa Correia 16th International Conference on Composite Structures (ICCS 16)

Porto, Portugal June

Albano Neves e Sousa 18th International Congress on Sound and Vibration - ICSV18

Rio de Janeiro, Brazil

10-14 July 2011

Inês Flores-Colen 12th DBMC International Conference on Durability of Building Materials and Components

Porto, Portugal April 2011

A.2 National Events


Jorge de Brito Primeiras Jornadas de Impermeabilização “Modernizar e Inovar”

Lisboa March 2011

Jorge de Brito Semana de Tecnologia e Design, Escola Superior de Tecnologia e Gestão, Instituto Politécnico de Portalegre

Portalegre April 2011

Jorge de Brito 1ª Conferência da Construção e Reabilitação Sustentável de Edifícios no Espaço Lusófono

Lisboa May 2011

Jorge de Brito Seminário “Avaliação do Ciclo de Vida na Construção”

Guimarães May 2011

Jorge de Brito Congresso LiderA 2011 Lisboa May 2011

Jorge de Brito 2º Congresso sobre Segurança e Conservação de Pontes (ASCP)

Lisboa June 2011

Jorge de Brito Workshop “Edifícios Balanço Zero - Rumo ao Impacte Nulo da Construção e Reabilitação nas Cidades”

Lisboa November 2011

Jorge de Brito 2º Workshop do CIB Student Chapter do DECivil - A Sustentabilidade e o Ciclo de Vida das Construções


José Dinis Silvestre Seminário “Avaliação do Ciclo de Vida na Construção”

Guimarães May 2011


__________________________________________________________________________________________

130

José Dinis Silvestre Congresso LiderA 2011 Lisboa May 2011

José Dinis Silvestre 2º Workshop do CIB Student Chapter do DECivil - A Sustentabilidade e o Ciclo de Vida das Construções


Pedro Henriques iiSBE, 1ª Conferência, Sustentabilidade na Reabilitação Urbana

Lisboa Set. 2011

Fernando Branco Seminário sobre os 20 anos da Ponte S. João – OE, Porto

Porto Set. 2011

Fernando Branco Gestão de Empreendimentos- Epul, Lisboa Lisboa Nov. 2011

Inês Flores-Colen IX SBTA – Simpósio Brasileiro de Tecnologia de Argamassas, Belo Horizonte, Brazil

Belo Horizonte, Brazil

Maio 2011

Inês Flores-Colen 2º Workshop do CIB Student Chapter do DECivil - A Sustentabilidade e o Ciclo de Vida das Construções


João Ramôa Correia 1ªs Jornadas Materiais na Construção, FEUP, Porto, Abril de 2011

Porto April 2011



Date

José Dinis Silvestre CIB W80 - Prediction of Service Life of Building Materials and Components - meeting

Helsinki, Finland

October 2011

João Ramôa Correia IABSE Working Group 2 on FRP Structures

London, UK September 2011






1. FCT PhD grant SFRH/BD/76259/2011: Estudo da compatibilidade de soluções de revestimento para

alvenarias antigas (Compatibility of coating solutions for old masonry): Bruna Amarílis da Palma e Silva

(supervision and co-supervision: A.P. Ferreira Pinto and A. Gomes) (submitted June).

2. FCT Project PTDC/ECM/121512/2010 - Avaliação Probabilística do Ciclo de Vida de Edifícios com

Modelação da Incerteza na Previsão da Vida Útil - SLP-based-LCA (Probabilistic Evaluation on the Life Cycle

of Buildings with Service Life Prediction Uncertainty Modelling) (2011-2014) (IST coordinator: Jorge de Brito).


__________________________________________________________________________________________

131

3. ADI Project 13/SI/2011 T317396370-00016707 - Project DUPLEG-V – Fachadas de Dupla Pele de

Geometria Variável – (Double skin facades with variable geometry) (M.G.Gomes, A. Moret Rodrigues)

(submitted September 2011).

4. FCT Project PTDC/ECM/119444/2010 - HS-CIC - Habitação Sustentável de Custo e Impactos Controlados /

LcLi-SH - Low-cost and Low-impacts Sustainable House (P.G. Henriques) (submitted February 2011).

5. FCT Project PTDC/ECM/119104/2010 - Grouts for reparing old masonries (A.P. Ferreira Pinto, A.M. Gomes,

N. Almeida) (submitted February 2011).

6. FCT Project PTDC/ECM/122430/2010 - Gestão da manutenção de edifícios apoiada nas tecnologias BIM e

de Realidade Virtual (RV) - Maintenance management support on Building Information Modelling (BIM) and

Virtual Reality (VR) Technologies (A.Z. Sampaio, A.M. Gomes, R. Camarinha) (submitted February 2011)


1. FCT Project PTDC/ECM/1128372/2010 - Betão com Agregados Reciclados de Elevado Desempenho para a

Indústria da Pré-Fabricação - EXELlentSUStainableCONcrete (High Performance Recycled Aggregates

Concrete for the Precasting Industry) (2012-2015) (IST coordinator: Jorge de Brito).

2. FCT Project PTDC/ECM/118271/2010 - FCT Grant - Protecção ao Fogo de Elementos Estruturais de Betão

Armado Reforçados com Sistemas Compósitos de CFRP – CARBOFIRE (Fire Protection of Reinforced

Concrete Structural Elements Strengthened with CFRP Composite Systems) (2012-2015) (IST coordinator:

João Ramôa Correia).

3. ADI QREN 06/SI/2010 - Tomografia e Reabilitação de Estruturas de Betão Armado e Pré-esforçado

(Tomography and rehabilitation of concrete structures) (2011-2013) (Promoter: TD SA. IST coordinator:

Fernando Branco).

4. PTDC/ECM/118262/2010 – FCT Grant - NANORENDER - Desempenho de argamassas de revestimento

com nanoaerogéis de sílica - NANORENDER - Performance of silica nanoaerogel-based renders (2012-

2015) (IST coordinator: Inês Flores-Colen)


1. FCT Project PTDC/ECM//2008 - Desempenho mecânico e de durabilidade de betões produzidos com

agregados finos reciclados obtidos a partir de resíduos de construção e demolição de centrais de reciclagem

portuguesas (2010-2013) (IST coordinator: Jorge de Brito)

2. FCT Project PTDC/ECM/113041/2009 - Reabilitação de Pisos de Edifícios com Painéis Sanduíche em GFRP

de Alto Desempenho - RehabGFRP (Rehabilitation of Building Floors with Lightweight High Performance

GFRP Sandwich Panels - RehabGFRP) (2011-2013) (IST coordinator: Fernando Branco; Principal

researcher: João Correia)

3. FCT Project PTDC/ECM/100168/2009 - Reabilitação estrutural de paredes de alvenaria em edifícios antigos -

REABEPA (Structural rehabilitation of masonry walls in old buildings - REABEPA) (2010-2013) (IST

coordinator: Fernando Branco; Principal researcher: João Ferreira)


__________________________________________________________________________________________

132

4. FCT Project PTDC/ECM/100779/2008 - Sistemas de protecção ao fogo para perfis pultrudidos de GFRP -

FIRE-FRP (Fire protection systems for GFRP pultruded profiles) (2009-2013) (IST coordinator: Fernando

Branco; Principal researcher: João Correia)

5. ADI Project 2009/003456 - PONTALUMIS – Desenvolvimento de um protótipo de uma passagem superior

pedestre (Development of a prototype of a pedestrian bridge) (2008-2011) (IST coordinator: Fernando

Branco; Principal researcher: João R. Correia).

6. FCT Project PTDC/ECM/67748/2006 “Tecnologia de Realidade Virtual aplicada como ferramenta de apoio no

planeamento da manutenção de construções”,”Virtual Reality Technology applied as a support tool to the

planning of construction maintenance”, (Sampaio, A.Z.; Gomes, A.M.; Costa, A.).

7. FCT Project PTDC/ECM/105075/2008: “Estudo da compatibilidade entre endurecedores de superfície e o

betão de base em lajes de betão”, Responsável: António Carlos Bettencourt Ribeiro.

8. FCT Project PTDC/ECM/101810/2008: “Argamassas cimentícias modificadas com polímeros para reparação

de estruturas de betão armado”, Responsável: Maria Sofia Coelho Costa e Sousa Ribeiro.

B.4 PhD grants – Awarded

1. FCT PhD grant SFRH/BD/78584/2011 (Garrido, M.). Rehabilitation of Building Floors with Lightweight High

Performance GFRP Sandwich Panels (supervision and co-supervision: João Ramôa Correia and

Fernando Branco).

2. FCT PhD grant SFRH/BD/80234/2011 (Valarinho, L.). Structural Glass. Development of GFRP-Glass

Composite Beams (supervision and co-supervision: João Ramôa Correia and Fernando Branco).




Organization Date

João Ferreira Study on the durability of concrete with blast furnace slag. (Master thesis of Vera Correia)

Chalmers University, Sweden

Since Sept. 2011

Fernando Branco Red Prevenir (Latin American network for bulding pathology)

CONPAT 2011

João Ramôa Correia / Fernando Branco

Co-supervision of the PhD Thesis of Mário Garrido

École Polytechnique Fédérale de Lausanne

2011

João Ramôa Correia Member of the jury of the PhD Thesis of Omar Moussa

École Polytechnique Fédérale de Lausanne

Nov. 2011


__________________________________________________________________________________________

133



Organization Date

Jorge de Brito Co-supervision of a PhD thesis UM 2011

Jorge de Brito Co-supervision of several MSc theses LNEC 2011

Fernando Branco Co-supervision of MSc theses LNEC 2011

João Ferreira Study on the behaviour of glued laminates. (Master thesis of Luís Gonçalves and David Marcelino)

LNEC Since Sept. 2011

João Ferreira / Fernando Branco

Study on the behaviour and strengthening of timber framed masonry walls. REABEPA Project

UM Since 2010

João Ferreira / Fernando Branco

Study on the behaviour and strengthening of timber framed masonry walls. REABEPA Project

LNEC Since 2010


Development of a prototype of a pedestrian bridge made of GFRP profiles and steel fibre reinforced self-compacting concrete (PONTALUMIS Project).

UM Since 2008


Study of structural behaviour of GFRP sandwich panels for building floor rehabilitation (REHAB-GFRP Project)

UM Since 2010


Study of the fire behavior of GFRP pultruded profiles (FIRE-FRP Project)

FEUP/INEGI Since 2009

João Ramôa Correia Studies on the behaviour of GFRP reinforced concrete (P. França)

UMa 2011

João Ramôa Correia Co-supervision of several MSc dissertations (M.P. Rodrigues, S. Cabral-Fonseca, J. Grandão Lopes)

LNEC 2011

Inês Flores-Colen Co-supervision of MSc thesis LNEC 2011


Studies about glass (José Sena Cruz) UM 2011



João Ferreira, Fernando Branco

Study on the behaviour and strengthening of old buildings’ walls. RehabToolbox. Collaboration with Luís Guerreiro, Jorge Proença, António Gago of Group 1

João Ferreira, Fernando Branco

Research Project REABEPA funded by FCT, with Luís Guerreiro, Jorge Proença, António Gago of Group 1

João Ramôa Correia, Fernando Branco

Collaborative research in GFRP structural elements with members of Group 2 (Dinar Camotim and Nuno Silvestre)

Since 2010

João Ramôa Correia, Research project FIRE-FRP funded by FCT, in collaboration Since 2009


__________________________________________________________________________________________

134

Fernando Branco with Group 2 (João Teixeira de Freitas and Carlos Tiago)

João Ramôa Correia, Augusto Gomes

Co-supervision of a PhD Thesis (Mário Sá) with a member of Group 2 (Nuno Silvestre)

Since 2009

João Ramôa Correia Co-supervision of 2 MSc thesis (Francisco Nunes and Manuel Correia) with a member of Group 2 (Nuno Silvestre)

2011

João Ramôa Correia Co-supervision of a PhD Thesis (Vasco Granadeiro) with a member of Group 6 (José Pinto Duarte)

Since 2010

A.Z. Sampaio, A.M. Gomes

Virtual Reality Technology applied as a support tool to the planning of construction maintenance (PTDC/ECM/67748/2006) – cooperation with A. Costa

Jan 2008 – Jun2011


A.1 Internacional

A.2 National


Organization Date

Jorge de Brito Leccionação e responsabilidade de uma disciplina no Mestrado em Engenharia Civil

Universidade da Madeira

2011

Albano Neves e Sousa Invited lectureship of Building Physics Universidade da Madeira

January - March 2011




Jorge de Brito Prémio Científico UTL/Santander Totta, na área científica de “Engenharia Civil, Engenharia Mecânica, Engenharia Naval, Engenharia Geológica e Mineira, Engenharia Aeroespacial (Aeronave), Engenharia do Território, Transportes e Biomecânica”

UTL

José Dinis Silvestre Honour Diploma concerning the UTL/Deloitte Young Researcher Award 2011, in the scientific area of “Civil Engineering, Mechanical Engineering, Naval Engineering, Mining and Geological Engineering, Aerospace Engineering, Territorial Engineering, Transportation, Biomechanics”

UTL

Miguel Bravo / Jorge de Brito

1º Prémio Inovação Valorpneu pelo trabalho “Betão com Borracha Proveniente de Pneus Usados

Valorpneu

João Ferreira “Best student paper award”, Annual Conference of The International Emergency Management Society - TIEMS 2011, with the paper entitled “Seismic Risk Management of Civil Buildings in Romania Based on the Incremental Seismic Rehabilitation Concept” Andreea Duţu, João

International Emergency Management Society - TIEMS


__________________________________________________________________________________________

135

Gomes Ferreira, Cristian Sandu, June 2011.

Luís Valarinho Prémio Secil Universidades Engenharia Civil 2010 com o trabalho “Construção em vidro estrutural - comportamento estrutural de vigas mistas vidro-GFRP”

Secil

João Pedro Firmo Prémio IHRU 2011 para a melhor tese de mestrado, com o título "Comportamento ao fogo de vigas de Betão Armado reforçadas à flexão com laminados de fibras de carbono - desenvolvimento de sistemas de protecção ao fogo"

IHRU



Jorge de Brito Journal of Computer-Aided Civil and Infrastructure Engineering

Información Tecnológica

Composites Part A

Indian Journal of Engineering & Materials Sciences

Progress in Structural Engineering & Materials

Construction and Building Materials

ACI Materials Journal

Journal of Materials Science

International Journal of Architectural Heritage


Restoration of Buildings and Monuments

Engineering History and Heritage

Structure and Infrastructure Engineering

Recent Patents on Materials Science

Materials and Structures

Journal of Zhejiang University - Science A

International Journal of Sustainable Engineering

Materials Science Forum

Accounts of Chemical Research

Revista Internacional Construlink

Cement and Concrete Composites

International Journal of Materials Engineering Innovation

Journal of Composite Materials

Sustainability

Materiales de Construcción

Journal of the American Ceramic Society

Structural Engineering and Mechanics

Journal of Civil Engineering and Construction Technology

Structures and Buildings

International Journal of Environmental Research and Public Health


__________________________________________________________________________________________

136

HKIE Transactions

Engineering Structures

Waste Management & Research

Journal of Construction Engineering and Management

Journal of Performance of Constructed Facilities

Computers and Structures

Fire and Materials

Resources, Conservation & Recycling

Scientific Research and Essays

Recent Patents on Mechanical Engineering

Cuaderno Iberoamericano de la Construcción

Open Journal of Civil Engineering

Journal of Marine Science and Technology

Fernando Branco Structural Engineering International Journal (IABSE) (Switzerland))

Journal of Bridge Engineering (American Society of Civil Engineers) (USA)

Computers and Structures (Editors: K. Bathe; B. Topping) (UK)

Materials Journal (American Concrete Institute) (USA)

International Journal of Mechanics and Materials

Journal Structural Control and Health Monitoring (Wiley) (UK)

Structures Journal (American Concrete Institute) (USA)

Journal of Engineering Structures (Elsevier) (UK)

Int'l. Journal of Mechanics & Materials in Design (editor Springer)

International Journal of Materials and Product Technology (Interscience publishers)

(Spain)

Scientific Research and Essays (Academic Journals)

Structure and Infrastructure Engineering (IABMAS) (USA)

Revista ALCONPAT (ALCONPAT) (Mexico)

Reliability Engineering & System Safety (Elsevier) (UK)

Revista CONCRETO (IBRACON) (Brasil)

Structural Engineering and Mechanics, An international Journal (Techno-Press)

(Korea)

Journal of Civil Engineering and Construction Technology (Academic Journals)

Experimental Mechanics (SEM) (USA)

ISRN Civil Engineering

Journal of Reliability Engineering & System Safety (Elsevier) (UK)

Strain (Wiley) (UK)


Baltic Journal of Road and Bridge Engineering (Lituania)

João Ferreira Construction and Building Materials



__________________________________________________________________________________________

137

João Ramôa Correia Composite Structures

Composites Part A: Applied Science and Manufacturing

Composites Part B: Engineering

RIMNI - Revista Internacional de Métodos Numéricos para Cálculo y Diseño en

Ingeniería



Jorge de Brito Ingenium

Construção Magazine

Revista Portuguesa de Engenharia de Estruturas

Mecânica Experimental

Fernando Branco Revista Portuguesa de Estruturas (APEE)

Revista Mecânica Experimental (APAET)

João Ferreira Mecânica Experimental

João Ramôa Correia Revista Portuguesa de Engenharia de Estruturas

Engenharia Civil



Fernando Branco PhD Scholarships FCT

Fernando Branco Research Projects FCT

Fernando Branco Research Projects ADI

Fernando Branco CEC Research Centre (external commission) FCT/CEC



Fernando Branco Meeting ECCE Malta

Fernando Branco Meeting ECCE Antalya

Fernando Branco Engineer’s Day Brussels

Fernando Branco International Conference CONPAT 2011 Antiqua




Fernando Branco 20 Years of the S. João Bridge (seminar) OE Porto


__________________________________________________________________________________________

138

Fernando Branco, Jorge de Brito

Inspection and maintenance of bridges (Course) FUNDEC Lisboa

Fernando Branco, João Ferreira

Introduction to rehabilitation of old buildings (Course)

FUNDEC Lisboa

Fernando Branco, João Ferreira, João Correia

Introduction to rehabilitation of concrete buildings (Course)

FUNDEC Lisboa

Fernando Branco, João Correia, João Ferreira, Inês Flores-Colen

Experimental testing for building rehabilitation (Course)

FUNDEC Lisboa, Junho 2011

Fernando Branco, João Ferreira

Bridge Testing (Course) FUNDEC Lisboa

Fernando Branco New Technologies in Construction Management (lecture)

EPUL Lisboa

Inês Flores-Colen/Jorge de Brito

Planos de inspecção e manutenção de edifícios FUNDEC Fev. 2011

Inês Flores-Colen Facility Management – Visão estratégica de edifícios – espaços, serviços, instalações e tecnologia

FUNDEC Jul 2011

Inês Flores-Colen Manutenção pró-activa da envolvente de edifícios

FUNDEC Sept. 2011

Pedro Henriques Código dos Contratos Públicos FUNDEC Lisboa , Fev. and Nov. 2011

Pedro Henriques Gestão e Fiscalização de Obras FUNDEC Lisboa, Apr. 2011

II.18 Models


1. Correia, J.R.; Branco, F.A.: “BIST – Bridge Investigation for Special Trucks v3.0”, Desenvolvido

para a Ascendi.

2. Dias, J; Neves e Sousa, A: CAD software for verification of the Portuguese Thermal Regulation

RCCTE.

3. Neves e Sousa, A. – CAD software for verification of parts 1 and 2 of the standard EN12354.


__________________________________________________________________________________________

139

II.20 Pilot plants

II.21 Prototypes

João Ferreira: Construction of 6 prototypes of timber framed masonry wall for experimental testing

João Ramôa Correia, Fernando Branco: Construction of a hybrid GFRP-SFRSCC 6 m span

footbridge (PONTALUMIS project)

II.22 Patents

II.23 Miscellaneous

E. Júlio; J. Brito (ed.s), "Envolvente de Edifícios”, Construção Magazine N.º 42, 2.º bimestre 2011

ICIST - Instituto de Engenharia de Estruturas, Território e Construção Group 4 -SDG

__________________________________________________________________________________________

140

RESEARCH GROUP – STRUCTURAL DESIGN AND

GEOTECHNICS

RESEARCH GROUP CO-ORDINATOR – Prof. Luís Manuel Calado de

Oliveira Martins


I.1 Budget

BUDGET (euros)

FCT Other Funding

STRATEGIC PROJECT

FCT

Projects

Int. R&D

Projects


Consultancy Total

15.822,98 89.536,87 0,00 0,00 63.746,74 169.106,59

I.2 Personnel

PERSONNEL




Phd researchers

António José Luís Reis Full Prof. X

António Costa Assist. Prof.

X X

Carlos Santos Pereira Assoc. Prof.

X

Eduardo S. Júlio Full Prof. X X

Emanuel Leandro Maranha das Neves

Full Prof. X

Francisco Baptista Esteves Virtuoso

Assoc. Prof.

X

Isabel Maria Figueiredo Lopes Ciência

2008 X X

Jaime Alberto dos Santos Assoc. Prof.

X

ICIST - Instituto de Engenharia de Estruturas, Território e Construção Group 4 - SDG

__________________________________________________________________________________________

141

PERSONNEL




João Carlos Oliveira Fernandes de Almeida

Assoc. Prof.

X

João Carlos Vinagre N. Santos Assist. Prof.

X

Sérgio Cruz Assist. Prof.

X

José Joaquim Oliveira Pedro Assist. Prof.

X

José Manuel Matos Noronha da Câmara

Assoc. Prof.

X

Júlio Appleton Full Prof. X

Luís Manuel Calado de Oliveira Martins

Full. Prof. X X

Maria Rafaela Pinheiro Cardoso

Assist. Prof.

X X

Paulo Alexandre Lopes Fernandes

Coord, Prof.

X

Paulo Miguel Macedo França Assist. Prof.

X

Pedro António Martins Mendes Assoc. Prof.

X

Pedro Fernando e Mota Guedes de Melo

Assist. Prof.

X

Pedro Miguel Duarte Santos Adj. Prof. X

Regina Helena Ferreira de Souza

X

Ricardo Figueiredo Mendes Vieira

Assist. Prof.

X X

Rui Pedro Carrilho Gomes Assist. Prof.

X X

Rui Vaz Rodrigues X

Teresa Maria Bodas de Araújo Freitas

Assist. Prof.

X X

Anirban Mandal X

MSc Researchers

Inês Figueira Grilo X

Luís Filipe Brandão Ferreira X


__________________________________________________________________________________________

142

PERSONNEL




Rui Filipe Simões Meles Saldanha

X

Ehsan Ghafari X

Carlos António Marques Lemos

X

Hugo Sérgio Sousa Costa X

Jónatas Miguel de Almeida Valença

X

João Paulo Veludo Vieira Pereira

X

Sara Maria de Oliveira Gomes X

Technical staff


Cristina Ventura

Leonor Regateiro

PERSONNEL - RESUME



PhD researchers 25 2 27


Graduate

Technical staff

Administrative staff 2 2

Others

Leadership

Since July 2007, Prof. Luís Calado is the coordinator of this Research Group. All Ph.D. members of the Group

meet formally once a year, in order to define and plan the common activities.


__________________________________________________________________________________________

143


Facilities

Mechanics (LMC), the latter shared with other groups within ICIST. A more detailed description of

each laboratory is presented ahead.

LERM: Regarding the laboratorial components available at LERM the following equipment should be

mentioned: Steel frames; Reaction wall (able to apply horizontal forces of 1000kN, 4m above floor

level); Static and dynamic actuators; Automatic data acquisition systems; Accelerometers and

displacement transducers; Universal testing machine; Press for compression testing; Travelling crane

and Wind tunnel. The above-mentioned equipment allows the realization of full-scale tests of

components or one storey frames.

LabGeo: The facilities of the Laboratory of Geotechnics have been used for teaching, research and

consultancy projects. It provides the experimental means necessary to the development of

fundamental research on stress-strain behaviour of soil from very small deformation to failure

conditions under monotonic and cyclic loading. It also provides the possibility to obtain high quality

soil parameters for applied research on numerical modelling of soil-structure interaction problems.

Several MSc and PhD thesis were developed using the available equipment resources to perform

advanced physical mechanical and hydraulic characterization of geomaterials in saturated and in

unsaturated conditions. Moreover, existing equipment allows performing field tests such as quality

control and dynamic load tests on piles and seismic tests for site characterization.

LMC: Regarding the computational equipment available it should be emphasized the connection to an

European network of electronic mail, as well as the Computational Mechanics laboratories equipped

with RISC technology graphic workstations, PCs and Macs served by a cluster which includes a

machine with parallel processing. It is also available all the necessary support equipment, such as

printers, plotters, scanner, and the software necessary to the development of numerical models and

experimental data processing.







In progress 40

Publications Papers in peer-reviewed journals


8.166 9

National peer- 3 3


__________________________________________________________________________________________

144

reviewed journals


International 4 4

National - -



National 9.5 10

Books

Entire - -

Chapters 3 3

As editor - -

Reports -




International 3

National 6


International 12

National 12


International 18

National 8


International 4

National 6


National 11




Submitted 1

Awarded -

In progress 1


Submitted 4

Awarded 4

In progress 8


National 6


National -

Awards (national and international) -



__________________________________________________________________________________________

145


Lectures by invitation in international conferences (plenary, keynote) -


12

Models -

Software applications -

Pilot plants -

Prototypes -

Patents -



__________________________________________________________________________________________

146




The research activity of Group 4 for 2011 was planned to focus on the analysis and design of

structures and geotechnics, deepening the work developed in previous years. In the following

paragraphs, a short overview of this plan is presented, concerning steel and composite structures

(SCS), structural concrete (SC) and geotechnics (G).

SCS: For 2011, it was planned: (i) to conduct experimental tests on steel subassemblages with bolted

and welded dissipative fuses; and (ii) to develop numerical models of the dissipative fuses and

proposal of design rules.

SC: The main goals for 2011 included developments in the following topics: (i) advanced cementitious

materials, (ii) structural connections, (iii) FEM-based structural modelling; (iv) adaptive stress field

based models to study structural concrete discontinuity regions, (v) durability of concrete structures,

(vi) pathology and structural assessment of existing concrete structures, (vii) risk analysis and

robustness, (viii) seismic retrofitting of concrete buildings, and (ix) design of concrete tall buildings.

G: Research activities for 2011 were planned to focus the following fields: (i) dynamic characterization

of soils from small to large strains, including liquefaction; (ii) elastic response measured in resonant

column and using bender elements; (iii) characterization of the hydro-mechanical behaviour of clayey

soils considering their structure and saturation degree.


In 2011, the following achievements of Group 4 can be highlighted: (i) 3 PhD theses concluded and

14 in progress; (ii) 30 MSc theses concluded and 40 in progress; (iii) 3 book chapters authored; (iv) 9

papers published in international journals cited on ISI Web of Knowledge or Scopus; and (v) 33

papers published in international conferences proceedings. It should also be mentioned that several

R&D projects are in progress, funded by the European Union (1) and by national institutions (8), and

more have been awarded (4) and submitted (4). Furthermore, members of ICIST Group 4 have been

active as: (vi) members of the editorial board of several international journals and as editor-in-chief of

a national journal, (vii) reviewers of several international journals, (viii) members/president of the

scientific committee and organizing committees of several international and national conferences, as

well as (ix) members of working groups of international and national associations, responsible for

drafting codes, for instance.


__________________________________________________________________________________________

147



For 2012, it is planned to continue working in the same major research lines, Steel and Composite

Construction, Structural Concrete and Geotechnics, being Bridges included in these. Nevertheless, an

effort will be made to promote a deeper and effective collaboration between these four sub-groups,

namely by: (i) defining a common strategy, (ii) identifying synergies between two or more sub-groups

that can lead to the submission of joint research projects, and by (iii) taking advantage of differences

between members expertise and profile, since Group 4 includes a unique set of both excellent

researchers and excellent designers in each of the 4 topics referred to.

The research activities on 2012 from the Geotechnics group will focus on several fields, namely:

i) dynamic characterization of soils from small to large strains including liquefaction;

ii) development of techniques to combine SH seismic refraction and MASW for a 2D velocity

model of a site;

iii) numerical modelling of the seismic response of underground structures;

iv) structural changes suffered by the soil subjected to suction and stress cycles, including

seismic actions. Different materials will be analysed for different deformation ranges to take

advantage of the equipment of LabGeo;

v) settlement prediction of embankments made of geotechnical traditional (clays and rockfills) or

non-traditional materials (evolving materials, light weight clay expanded aggregates).


A. Ph.D. theses

A.1 Concluded

Student Name Thesis title University and date

Course Supervisors (ICIST only)

Carlos Menegazzo Araújo

Análise e Dimensionamento de Lajes Pré-fabricadas Alveolares

Analysis and Design of Prefabricated Hollow Core Slabs

Federal Univ. of Santa Catarina, Brazil (March 2011)

Civil Engineering

José Câmara

Javier Camacho-Tauta

Evaluation of the small-strain stiffness of soil by non-conventional dynamic testing methods.

Avaliação da rigidez dos solos no domínio das pequenas deformações através de ensaios dinâmicos não convencionais

IST/UTL (July 2011)

Civil Engineering

Jaime Santos


__________________________________________________________________________________________

148

Maria João de Brito Coelho

Desenvolvimentos do método das ondas sísmicas superficiais no âmbito da geotecnia

Improvements to the surface wave method for geotechnical characterization

IST/UTL (July

2011)

Engineering

Sciences

Jaime Santos

A.2 In progress

Student Name Thesis title University (starting year)


Jónatas Miguel de Almeida Valença

Aplicação de Análise Multi-Espectral e de Laser-Scanning na Inspecção de Estruturas de Betão Armado

Structural Health Monitoring of Concrete Structures using Image Processing and Multi-Spectral Analysis

FCTUC (2007)

Civil Engineering

Eduardo S. Júlio

João Paulo Veludo Vieira Pereira

Reforço de Fundações com Micro-Estacas. Ligação Aço-Calda-Betão

Strengthening of Existing RC Footings with Micropiles. Steel-Mortar-Concrete Connection.

FCTUC (2007)

Civil Engineering

Eduardo S. Júlio

Hugo Sérgio Sousa Costa

Comportamento de Elementos de Betão Armado Reforçados com Betões Estruturais de Agregados Leves

Behavior of RC Elements Strengthened with Light-Weight Aggregates Concrete

FCTUC (2008)

Civil Engineering

Eduardo S. Júlio

Carlos António Marques Lemos

Adesão de Argamassas de Reboco e de Reparação a Substratos de Betão

Adhesion of Repair and Plastering Mortars to Concrete Substrates

FCTUC (2010)

Civil Engineering

Eduardo S. Júlio

Ehsan Ghafari Betão de Ultra-Elevada Durabilidade. Formulação, Caracterização Material e Desenvolvimento de Capacidade Auto-Sensor

Ultra High Durability Concrete. Mixture Design, Material Characterization and Self-Sensor Capacity Development

FCTUC (2010)

Civil Engineering

Eduardo S. Júlio

Rui Filipe Simões Meles Saldanha

Teoria do "Corte-Atrito” Modificada para Interfaces entre Betão de Ultra-Elevada Durabilidade e Betão Corrente

Modified "Shear Friction” Theory for Interfaces between Ultra-High Durability Concrete and Other

FCTUC (2010)

Civil Engineering

Eduardo S. Júlio / Pedro Santos


__________________________________________________________________________________________

149

Concretes

Luís Filipe Brandão Ferreira

Painéis de Fachada em Betão Eco-Eficiente Activado Alcalinamente

Façade Panels Precast with Eco-Efficient Alkali-Activated Concrete

FCTUC (2010)

Civil Engineering

Eduardo S. Júlio

Inês Figueira Grilo

Utilização de Tijolos Melhorados com Nanomateriais como Reserva de Robustez Estrutural de Edifícios sujeitos a Acções Extremas Imprevistas

Use of Nano-Enhanced Masonry Walls as Robustness Reserve of Buildings Submitted to Unforeseen Events

FCTUC (2010)

Civil Engineering

Eduardo S. Júlio

André Valente Monteiro

Propriedades Potenciais e Reais do Betão relativas à Durabilidade

Potential Actual Durability related Properties of Concrete

IST/UTL (2010)

Civil Engineering

António Costa

Paulo Renato Camacho da Silva Lobo

Tecnologia, Concepção e Análise de Edifícios Altos de Betão

Concrete Tall Buildings - Technology, Analysis and Design

IST/UTL (2011)

Civil Engineering

João Almeida

Ricardo Santos Overall process of internal erosion in embankment dams by suffusion leading to breach

IST/UTL (2009)

Civil Engineering

E.Maranha das Neves

Joana Maria Rodrigues Carreto

Contribuições para o dimensionamento e controlo de qualidade de paredes moldadas auto-endurecedoras

(Contributions to the design and quality control of retaining walls)

IST/UTL (2009)

Civil Engineering

E.Maranha das Neves

Sérgio Cansado Paraíso

Ensaio de carga dinâmico em estacas de alta capacidade resistente

(Dynamic load test on high capacity piles)

IST/UTL

(2011)

Civil Engineering

Jaime Santos

João Pedro Lage

da Costa Firmo








IST/UTL

(2011)

Civil

Engineering

Supervisor: João Correia

(RG 3)



(RG 4)


__________________________________________________________________________________________

150

João Pedro de Oliveira Dias Prudente dos Santos

Smart Systems for Structural Heath Monitorization

IST/UTL (2009)

Civil Engineering

Luís Calado


B.1 Concluded



Carlos Octávio

Simões Mendes

Fernandes

Comportamento de Vigas de Longo Vão Pré-Fabricadas em Betão de Elevada Resistência Pré-Esforçado Reforçadas com Mantas de CFRP

Behaviour of Long Span Prestressed Beams Precast in HSC Strengthened with CFRP

FCTUC

(2011)

Civil Engineering

Eduardo S. Júlio

Luís Miguel

Marques Cunha

Fernandes

Determinação da Resistência à Compressão do Betão através de Ensaios de Carotes

Assessment of Concrete Compressive Strength through Core Testing

FCTUC

(2011)

Civil Engineering

Eduardo S. Júlio

Dina Sofia

Abelheira Esteves

Desenvolvimento e Caracterização de um Betão Estrutural de Agregados Leves Auto-Compactável Reforçado com Fibras de Aço

Development and Characterization of Self-Compacting Light-Weight Aggregates Concrete Reinforced with Steel Fibres

FCTUC

(2011)

Civil Engineering

Eduardo S. Júlio

Sérgio Ferreira

Jorge

A Influência da Pintura Anticorrosiva na Aderência de Armaduras Ordinárias a Argamassas de Reparação

Influence of Anti-Corrosion Coating on the Adhesion between Rebars and Repairing Mortars

FCTUC

(2011)

Rehabilitation of the Built Heritage

(pre-Bologna)

Eduardo S. Júlio

Pedro Elói Aguiar Moniz

Betões de Ultra Elevada Resistência Reforçados com Fibras de Aço Ductal®

Ultra High Performance Fiber Reinforced Concrete – Ductal®

IST/UTL (March. 2011)

Civil Engineering

Sérgio Cruz

Rui Pedro Frazão Barreiros

Soluções Pós-Tensionadas para Pavimentos de Grande Vão e Sobrecarga Elevada - Aplicação a Edifícios Comerciais e Industriais

Heavy duty long span post-tensioned floors - Industrial and commercial buildings

IST/UTL (May. 2011)

Civil Engineering

João Almeida

Bruno Baleia Casal

Ligações entre betões de idades diferentes. Aplicações diversas

Connections Between Concrete Layers

IST/UTL

(July 2011)

Civil Engineering

José Câmara


__________________________________________________________________________________________

151

with Different Ages

Alexandra Oliveira da Rosa

Processos Construtivos em Edifícios Altos de Betão

Concrete Tall Buildings – Construction Methods

IST/UTL (July. 2011)

Civil Engineering

João Almeida

Catarina Palavichini Gomes dos Santos

Impacto Económico da Utilização de Betões de Alta Resistência na Construção de Edifícios Altos

Concrete Tall Buildings – Economic Impact of High Performance Concrete

IST/UTL (Nov. 2011)

Civil Engineering

João Almeida

Pedro Nuno Rodrigues Pacheco

Automatização do Processo de Dimensionamento das Estruturas de Betão Armado de Acordo com o EC2

The Use of Informatics in the Design and Detailing Process of Concrete Structures According to the EC2

IST/UTL

(Nov 2011)

Civil Engineering

Júlio Appleton

Óscar Ferreira Vieira

A consideração de deformações impostas no projecto de tanques

Consideration of imposed deformations on a tank project

IST/UTL

(Nov 2011)

Civil Engineering

José Câmara

José António Varandas Ferreira

Brito

Análise sísmica de edifícios com descontinuidade pontual de elementos verticais

Seismic Analysis of Buildings with Punctual Discontinuity of Vertical Elements

IST/UTL

(Nov 2011)

Civil Engineering

José Câmara

Diogo Daniel Análise do comportamento de uma galeria de conexão do metro de Barcelona durante a sua construção e a entrada da tuneladora

Analysis of the gallery connection behavior of Guinardó-Barcelona metro station during its construction and with the arrival of the TBM

IST/UTL (Jan. 2011)

Rafaela Cardoso

Ana Rita Barata Explicação micromecânica para a compressibilidade de materiais granulares

Study of the compressibility of granular materials by adopting a micromechanical approach

IST/UTL (Oct. 2011)

Rafaela Cardoso

João Pedro Domingues

Uso do Code Bright para estudar a influência do clima no comportamento de pavimentos considerando as deformações dos seus solos de fundação

Use of Code Bright to study climate influence on the behaviour of pavements considering the deformations of their foundation soils

IST/UTL (Nov. 2011)

Rafaela Cardoso


__________________________________________________________________________________________

152

Daniel Ribeiro Ensaios e modelação do comportamento hidro-mecânico de uma argila rija percolada com fluidos de natureza diferente da água

Testing and modeling the hydro-mechanical behavior of an hard clay percolated with fluids different from water

IST/UTL (Dec. 2011)

Rafaela Cardoso

Vasco Fernandes Caracterization of the behavoir of soils used in railway platforms considering wetting and drying cycles.

IST/UTL (Dec. 2011)

Rafaela Cardoso

Miguel Afonso Balastro contaminado das ferrovias – suas repercussões, soluções de reabilitação e destino final

Contaminated railway ballast – rehabilitation solutions and final destination

IST/UTL (Dec. 2011)

Rafaela Cardoso

Francisco Marques

Análise do potencial de liquefacção de areias com finos. Influência de finos-não plástico na resistência à liquefacção na Areia de Coimbra: Ensaio laboratorial e modelação numérica

Analysis of the liquefaction potential of sands with fines. Influence of non-plastic fines in the resistance to liquefaction of Coimbra sand: laboratorial tests and numerical modelling

IST/UTL (Dec. 2011)

Civil Engineering

Jaime Santos/

Rui Gomes

Fátima Gouveia Estudo da influência de características geológico-geotécnicas nos efeitos de sítio

Influence of geological-geotechnical characteristics on site effects

IST/UTL (Dec. 2011)

Civil Engineering

Rui Gomes/

Isabel Lopes

João Santos Análise do comportamento de paredes tipo Berlim definitivo

Analysis of the behaviour of concrete soldier pile walls

IST/UTL (Nov. 2011)

Civil Engineering

João Ferreira/

Rui Gomes

Maria Matilde Soares Mendes

Estudo de modelação da consolidação acelerada por drenos verticais tomando em consideração a fluência do terreno

Numerical study of the consolidation accelerated by vertical drains taking creep into account

IST/UTL Civil Engineering

Teresa Freitas

André Filipe

Biscaya Semedo

Pereira da Graça

Modelação da Acção em Pontes

devido à Passagem de Comboios de

Alta Velocidade

Assessment of Bridge Behaviour Due

to the Passage of High Speed Trains

IST/UTL

(Sep. 2011)

Civil

Engineering

Supervisors: Luís

Guerreiro /

Francisco Virtuoso


__________________________________________________________________________________________

153

Diego Lisi A beam finite elemento model including warping – Appiication to the dynamic and static analysis of bridge decks

Elemento finito de viga incluindo o empenamento da secção – Aplicação às análises estática e dinâmica de tabuleiros de pontes

IST/UTL (Oct. 2011)

Civil Engineering

Francisco Virtuoso

Ricardo Vieira

Pedro Eduardo Viúla Faria

Efeitos da Instalação de Paredes Moldadas

Diaphragm walls installation effects


Jaime Santos

Miguel João da Silva Bárbara

Estudo de Pontes com Pré-Esforço Extradorsal

Study of Extradosed Bridges

IST/UTL (Out. 2011)

Civil Engineering

José Oliveira Pedro

Rui Pedro Carrasco Pãosinho

Projecto base de uma ponte ferroviária com tabuleiro de betão armado pré-esforçado executado por lançamento incremental

Preliminary Design of a Railway Bridge with a Prestressed Concrete Deck Executed by Incremental Launching

IST/UTL (Mar. 2011)

Civil Engineering


Roberto Ribeiro de Mendonça Feijóo

Estabilidade Global de Tabuleiros Atirantados

Global Stability of Cable-Stayed Decks

IST/UTL (Out. 2011)

Civil Engineering


Carlos Miguel Cabeçadas Calado

Concepção Estrutural das Pontes de Tirantes

Structural Design of Cable-Stayed Bridges

IST/UTL (Out. 2011)

Civil Engineering


Susana Isabel Henriques Duarte

Projecto base de uma ponte ferroviária com tabuleiro de betão armado pré-esforçado executado por lançamento incremental

Incremental Launching of Bridges: The new railway bridge over Rio Sado, in Alcácer do Sal

IST/UTL (Out. 2011)

Civil Engineering


Miguel Antunes da Cunha Espinha dos Santos

Hysteretic Behaviour of Dissipative Welded Devices for Earthquake Resistant Steel Frames

IST/UTL (April 2011)

Civil Engineering

Luís Calado / Jorge Miguel Proença

B.2 In progress

Student Name Thesis title University Course Supervisors (ICIST only)

Sérgio Rui Duarte Mendes

Patologias em Paredes de Tijolo Cerâmico

Pathologies in Clay Bricks Masonry Walls

FCTUC Civil Engineering

Eduardo S. Júlio

Cláudia Andreia Fernandes Pereira de Almeida

Método de Reparação Localizada para Estruturas de Betão com Requisitos Especiais de Cor e Textura

Patch Repair Method for Concrete

FCTUC Civil Engineering

Eduardo S. Júlio


__________________________________________________________________________________________

154

Structures with Special Requirements in Colour and Texture

Sérgio Henriques Reforço de Pilares de Betão Armado por Confinamento com CFRP

Strengthening of RC Columns using CFRP Confinement

IST-UTL Civil Engineering

Eduardo S. Júlio

Rodrigo Ferreira Protecção ao Fogo de Estruturas de Betão Armado Reforçadas com CFRP

Fire Protection of RC Structures Strengthened with CFRP


Eduardo S. Júlio

João Alarcão Calibração de Coeficientes Parciais de Segurança para Estruturas de Betão Armado Existentes

Calibration of Partial Safety Coefficients for Existing RC Structures


Eduardo S. Júlio

João Paulo Verde Antunes Parracho

Edifícios Altos – Sistemas de Amortecimento (TMD)

High Rise Buildings – Damping Systems


Sérgio Cruz

Tiago Filipe Morais Araújo Pontes

Dimensionamento Estrutural de elementos em Betão Armado de Centrais Hidroeléctricas enterradas

Structural Design of Reinforced Concrete Underground Powerhouses


Rui Vaz Rodrigues

Vasco Miguel Saúde Raio

Dimensionamento de Galerias de Adução em Betão Armado

Structural Design of Reinforced Concrete Pressure Tunnels


Rui Vaz Rodrigues

José Luís Candeias de Almeida

Modelos de Campos de Tensões – Aplicação ao Estudo de Diafragmas de Tabuleiros de Pontes de Betão

Stress Field Design Models - Diaphragms of Concrete Bridge Decks


João Almeida

David Miguel de Morais Gama

Pontes Integrais de Betão

Integral Concrete Bridges


João Almeida

Luís Filipe Moreira Ribeiro

Desenvolvimento de um projecto de execução de um auditório

Structural design of an auditorium


António J. S. Costa

Carlos Miguel Margarido Vaz Alves

Análise da influência das zonas sísmicas e classes de ductilidade no projecto de estruturas de edifícios

Analysis of the influence of seismic zones and ductility classes on the concrete structures of buildings




__________________________________________________________________________________________

155

Carlos Tavares da Estrela

Análise da influência das paredes de alvenaria no comportamento de estruturas de betão face à acção sísmica

Analysis of the influence of masonry infills on the structural behaviour of concrete structures under seismic action



Pedro Filipe Martins Tourais Pereira

Automatização do projecto de estruturas de betão relativamente à durabilidade

Automation of concrete structures durability design



Ivo Sales Henriques Miranda

Projecto de um Edifício com Ênfase na Análise e Dimensionamento das Paredes Resistentes

Structural Design of a Building


José Câmara

João Miguel Serras Delgado Valente

Influência da Evolução dos Sistemas de Comunicação Verticais na Concepção Estrutural de Edifícios Altos de Betão

Concrete Tall Buildings - Influence of Vertical Communication Systems on Structural Design


João Almeida

Ana Isabel Coutinho Casal

Deformações impostas na concepção e dimensionamento de edifícios

Buildings Structural Design for Imposed Deformations


José Câmara

Miguel Ângelo Louret

Desempenho de Equipamentos Visco-Elásticos Inseridos em Sistemas Estruturais de Edifícios Altos

High Rise Buildings – Visco-Elastic Systems


J. Sérgio Cruz

Ricardo José Ferreira Nogueira

A pré-fabricação na construção de edifícios

Prefabrication in building construction


José Câmara

Renato Jose Vacas Guedes

Eficiência das soluções estruturais dos pisos de edifícios

Relative Efficiency of Structural Building Floors


José Câmara

Duarte Nuno Lorvão Carreira

Verificação da Segurança Sísmica de Edifícios – Disposições do EC8

Seismic Safety Verifications for Buildings – Eurocode 8 Dispositions


José Câmara

Diogo Martins Rufino Costa Caiano

Efeitos do Empenamento em Núcleos de Paredes Resistentes de Edifícios Altos de Betão

Concrete Tall Buildings – warping torsion effects of open-section cores


João Almeida



__________________________________________________________________________________________

156

Luís Filipe Medeiros Amaral

Dimensionamento de elementos sísmicos secundários em estruturas de betão

Design of secondary seismic elements of concrete structures



João Filipe Barata Mendonça Perfeito

Projecto de Estruturas de um Edifício

Structural Design of a Building



Paulo Marques Baptista de Carvalho

Reforço sísmico de um edifício de acordo com o EC8-3

Seismic strengthening of a building according to Eurocode 8 – part 3



Antonio Adelino Fonseca Santos Cardoso

Reforço sísmico de um edifício de acordo com o EC8-3

Seismic Retroffiting of a Building in Accordance with EC8


J. Sérgio Cruz

José Maria Cardoso Pinto de Noronha Sanches

Concepção e análise sistemas estruturais de vidro

Design of Glass Structural Systems


J. Sérgio Cruz

Diogo José Martins Rego

Estruturas de Edifícios em Light Steel Framing

Buildings with Light Steel Frames


J. Sérgio Cruz

Rui Diogo Ribeiro Pita

Concepção, dimensionamento e pormenorização de estruturas de edifícios com vãos grandes, tirando partido do efeito de viga Virandeel

Design na Detailing of Building Structures Taking Advantages of the Virandeel Effect


José Câmara

Catarina Fartaria Pontes Integrais de Betão – efeitos da interacção solo-estrutura

Integral Concrete Bridges – Soil-structure interaction effects


João Almeida

Carlos Ruivo Estudo experimental sobre a compressão por fluência das aluviões lodosas da bacia do rio Tejo

Experimental study on the compressibility of the alluvium deposits of the Tagus river basin


Teresa Bodas Freitas

João Nogueira Santos

Consolidação de solos moles com efeitos electro-químicos

Consolidation of soft soils using electro-chemical effects


Rafaela Cardoso

Denise Barbedo Consideração da natureza do fluido percolante no dimensionamento de fundações de aterros de resíduos sólidos urbanos

Consideration of the nature of the percolating fluid in the design of landfill


Rafaela Cardoso


__________________________________________________________________________________________

157

foundations

Telmo Antunes Reabilitação de fundações de edifícios antigos com microestacas

Rehabilitation of foundations of old buildings with micropiles

IST/UTL Construction and Rehabilitation

João Ferreira

Rui P. C. Gomes

David Brito Análise do colapso da estação Dakai do Metropolitano de Kobe

Analysis of the colapse of the Dakai station of Kobe metro


Rui P. C. Gomes

Pedro Pereira Clemente Andrade Gonçalves

Estudo de Pontes em Arco do tipo "Bowstring”

Study of Bowstring Arch Bridges



Sónia Kong Vieira Projecto Base de uma Ponte em Arco Inferior



Diogo Martins Rufino Costa Caiano

Efeitos do empenamento em núcleos de paredes resistentes de edifícios altos de betão

Effects of the warping in concrete resistant walls of tall building


João Almeida


João Robalo Sobrecargas rodoviárias em pontes de acordo com o Eurocódigo 1. Análise comparativa e modelos simplificados.

Bridge live loads according to EN1991. Comparative analysis and simplified models.


Francisco Virtuoso

Ricardo Vieira



1. Dias-da-Costa, D.; Veludo, J.; Alfaiate, J.; Júlio, E.: "An element enriched formulation for simulation of

splitting failure", Engineering Fracture Mechanics, V. 78, n.º 2, Jan. 2011, pp. 301-316. (IF=1.576, NC=0)

2. Menegazzo Araújo, C.A.; Loriggio, D.D.; Câmara, J.M.M.N.: "Anchorage failure and shear design of hollow-

core slabs", Structural Concrete, V. 12, n.º 2, June 2011, pp. 109-119 (IF=0.000; NC=0)

3. Santos, P.; Júlio, E.: "Factors Affecting the Bond Between New and Old Concrete", ACI Materials Journal, V.

108, n.º 4, Jul.-Aug. 2011, pp. 449-456. (IF=0.000, NC=0)

4. Ferreira, T.; Fonseca Teixeira, P.; Cardoso, R.: "Impact of Bituminous Subballast on Railroad Track

Deformation Considering Atmospheric Actions", Journal of Geotechnical and Geoenvironmental Engineering,

V. 137, n.º 3, March 2011, pp. 288-292. (IF=0.687; NC=0)

5. Farinha, M.L.B.; Lemos, J.V.; Maranha das Neves, E.: "Numerical modelling of borehole water-inflow tests in

the foundation of Alqueva arch dam", Canadian Geotechnical Journal, V. 48, n.º 1, Jan. 2011, pp 1-17.

(IF=0.628; NC=0)

https://fenix.ist.utl.pt/teacher/viewStudentCurriculum.do?method=prepare&registrationOID=50697&executionDegreeId=13399&contentContextPath_PATH=/docencia/docencia&_request_checksum_=563a8eed9519c72a7c5b0645a002bcbc1d59e26d




__________________________________________________________________________________________

158

6. Santos, J.A.; Chitas, P.; Lopes, I.; Sousa Oliveira, C.; Almeida, I.M.; Nunes, J.C.: "Assessment of site-effects

using acceleration time series. Application to São Sebastião volcanic crater", Soil Dynamics & Earthquake

Engineering, V. 31, n.º 4, April 2011, pp. 662-673. (IF=1.010; NC=0)

7. Bodas Freitas, T.M.; Potts, D.M.; Zdravkovic, L: "A time dependent constitutive model for soils with isotach

viscosity", Computers and Geotechnics, V. 38, n.º 6, Sept. 2011, pp. 809-820. (IF=0.965; NC=0)

8. D'Aguiar, S.C.; Modaressi-Farahmand-Razavi, A.; Santos, J.A. dos; Lopez-Caballero, F.: "Elastoplastic

constitutive modelling of soil-structure interfaces under monotonic and cyclic loading", Computers and

Geotechnics, V. 38, n.º 4, June 2011, pp. 430-447 (IF=0.965; NC=0)

9. D'Aguiar, S.C.; Modaressi, A.; Santos, J.A. dos; Lopez-Caballero, F.: "Piles under cyclic axial loading: study

of the friction fatigue and its importance in piles behaviour". Canadian Geotechnical Journal, V. 48, n.º 10,

October 2011, pp. 1537-1550 (IF=0.628; NC=0)


1. Valença, J.; Dias-da-Costa, D.; Gonçalves, L.; Júlio, E.; Araújo, H.: "Monitorização Inteligente do Estado de

Conservação do Betão”, Construção Magazine 44, 4.º bimestre de 2011, pp. 24-28.

2. Appleton, J.: "Património em betão. Betão armado – nota histórica”, Construção Magazine 44, Julho/Agosto

de 2011, pp. 17-23.

3. Pedro, J.O.; Reis, A. J.: "Concepção e construção de pontes atirantadas com tabuleiro misto aço-betão”,

Revista Portuguesa de Engenharia de Estruturas Série II, n.º 9, Junho de 2011, pp. 15-29.



1. Santos, P.; Júlio, E.: "Assessment of the Bond Strength in Composite Members”, Concrete Plant International

4, August 2011, pp. 98-101.

2. Albuquerque, P.J.R.; Massad, F.; Viana da Fonseca, A.; Carvalho, D.; Santos, J.A.; Costa Esteves, E.:

"Effects of the construction method on pile performance: evaluation by instrumentation - part 1: experimental

site at the University of Campinas". Soils and Rocks, V. 30, n.º 1, January 2011, pp. 35-50.

3. Albuquerque, P.J.R.; Viana da Fonseca, A.; Santos, J.A.; Costa Esteves, E.; Massad, F.; Carvalho, D.:

"Effects of the construction method on pile performance: evaluation by instrumentation - part 2: experimental

site at the Faculty of Engineering of the University of Porto". Soils and Rocks, V. 30, n.º 1, January 2011, pp.

51-64.

4. Reis, A.J.; Pedro, J.O.: "Composite truss bridges: trends, design and research", Steel Construction - Design

and Research, V. 4, n.º 3, pp. 176-182.





__________________________________________________________________________________________

159

1. Braga Farinha, M.L.; Lemos, J.V.; Maranha das Neves, E.: "Analysis of foundation sliding of an arch dam

considering hydromechanical behaviour", Studies on Modern Technologies and Long-term Behaviour of

Dams, Jia Jinsheng & al. (edts), Chinapower Press, 28-29 September 2011, Zhengzhou, China.

2. Cachado, A.; Grilo, I.; Júlio, E.; Neves, L.: "Use of Non-Structural Masonry Walls as Robustness Reserve”,

2011 IABSE-IASS Symposium "Taller, Longer, Lighter", Queen Elizabeth II Conference Centre, London, UK,

Sept. 20-23, 2011.

3. Calado, L.: "Composite Slabs with Profiled Steel Sheeting”, Eurosteel 2011 – 6th European Conference on

Steel and Composite Structures, Budapest, Hungary, 31 Aug. - 2 Sept.; Volume A, pp. 645-650.

4. Caldeira, L.; Maranha das Neves, E.; Cardoso, R.: "Use of a damage parameter to model the mechanical

behavior of marls", Proc. XV European Conference on Soil Mechanics and Geotechnical Engineering, 12-15

Sept. 2011, Athens, Greece.

5. Camacho-Tauta, J.; Cascante, G; Santos, J.A.; Viana da Fonseca, A.: "Measurements of shear wave velocity

by resonant-column test, bender element test and miniature accelerometers". 2011 Pan-Am CGS

Geotechnical Conference, CD-Rom paper 949, 9p.

6. Camacho-Tauta, J.; Santos, J.A.; Viana da Fonseca, A.: "Control, acquisition and analysis of resonant-

column testing using an automated program”. IS'Seoul, International Symposium on Deformation

Characteristics of Geomaterials, V. 1, 250-257.

7. Cardoso, R.; Alonso, E.E.: "Modeling the oedometric behavior of a evolving marl under stress and suction

cycles", Proc. XV European Conference on Soil Mechanics and Geotechnical Engineering, 12-15 Sept. 2011,

Athens, Greece.

8. Cardoso, R.; Caldeira, L.; Maranha das Neves, E.; Dias, J.; Reis, R.: "Behaviour of an earth-rockfill dam

during its construction considering climate actions", Proc. 6th International Conference on Dam Engineering,

14-17 Feb. 2011, Lisbon, Portugal.

9. Cardoso, R.; Reis, A.; Maranha das Neves, E.; Caldeira, L.: "Hydro-mechanical behavior of a clayey soil

compacted on the dry and wet side of optimum”, Proc. VII Brazilian Symposium on Unsaturated Soil, 29-31

Aug. 2011, Pirenópolis, Brazil.

10. Castiglioni, C.A.; Kanyilmaz, A.; Drei, A.; Calado, L.; Vayas, I.; Rauert, T.; Gonçalves, R. M.: "Dissipative

Devices for Seismic Resistant Steel Frames”, Eurosteel 2011 – 6th European Conference on Steel and

Composite Structures, Budapest, Hungary, 31 Aug. – 2 Sept.; Volume B, pp. 993-998.

11. Costa, H.; Santos, P.; Júlio, E.: "Bond Strength of Normal-to-Lightweight Concrete Interfaces”, 2011 IABSE-

IASS Symposium "Taller, Longer, Lighter", Queen Elizabeth II Conference Centre, London, UK, September

20-23, 2011.

12. Costa, R.; Alfaiate, J.; Dias-da-Costa, D.; Júlio, E. ; Sluys, L.J.:: "Numerical Modelling of a High-Strength

Prestressed Concrete Beam Using a Strong Discontinuity Approach”, International Conference on Recent

Advances in Nonlinear Models – Structural Concrete Applications (CoRAN 2011), Coimbra, Portugal, November

24-25, 2011.

13. Costa, R.; Alfaiate, J.; Dias-da-Costa, D.; Sluys, L.J.: "A non-iterative approach for the modelling of quasi-

brittle materials", CFRAC 2011, Barcelona, June 6-8, 2011.


__________________________________________________________________________________________

160

14. Dias-da-Costa, D.; Alfaiate, J.; Sluys, L.; Júlio, E.: "An Embedded Discrete Strong Discontinuity Approach

with Interelement Compatibility of the Enhanced Kinematical Field", XI International Conference on

Computational Plasticity Fundamentals and Applications, COMPLAS XI, Barcelona, Spain, September 7-9,

2011.

15. Dias-da-Costa, D.; Alfaiate, J.; Sluys, L.J.; Júlio, E.: "Kinematical enhancement of the finite element in front of

the crack tip", CFRAC 2011, Barcelona, June 6-8, 2011.

16. Dias-da-Costa, D.; Valença, J.; Júlio, E.: "Visual-DSC: Monitoring Structural Displacements and Strains”,


September 20-23, 2011.

17. Farinha, F.L.B.; Pina, C.; Maranha das Neves, E.; Lemos, J.V.: "Quantitative interpretation of discharges

recorded in concrete dam foundations", 6th International Conference on Dam Engineering, LNEC, 14-17

Febr. 2011, Lisbon, Portugal.

18. Faustino, V.; Caldeira, L.; Maranha das Neves, E.: "Rockfill dams with bituminous concrete cores, structural

conception and dimensioning", Proc. 6th International Conference on Dam Engineering, LNEC, 14-17 Febr.

2011, Lisbon, Portugal.

19. Fernandes, V.; Cardoso, R.; Fonseca Teixeira, P.: "Effect of accumulated wetting-drying cycles on the

mechanical behavior of a silty-sand used to build a railway embankment”, Proc. VII Brazilian Symposium on

Unsaturated Soil, 29-31 Aug. 2011, Pirenópolis, Brazil.

20. Gomes, R.C.; Santos, J.A.: Influence of using records and artificial time-histories on ground seismic

response. 5th International Conference on Earthquake Geotechnical Engineering, Santiago, Chile, January

10-13, Paper nº 6.8.IOUGO.

21. Gomes, S.; Dias-da-Costa, D.; Fernandes, P.; Júlio, E.: "Numerical Study of the Flexural Behaviour of

Precast Prestressed High Strength Concrete Beams”, International Conference on Recent Advances in

Nonlinear Models – Structural Concrete Applications (CoRAN 2011), Coimbra, Portugal, November 24-25,

2011.

22. Grilo, I.; Branco, F.; Júlio, E.: "Protecção Face a Altas Temperaturas de Elementos Reforçados com FRP

com Recurso a Argamassas", CILASCI 1 – 1.º Congresso Ibero-Latino-Americano em Segurança Contra

Incêndios, Natal, Brazil, 11-13 March 2011.

23. Jorge, S.; Dias-da-Costa, D.; Júlio, E.: "Influence of Coatings on Rebar-to-Mortar Bond in Patch-Repairs”,


September 20-23, 2011.

24. Lourenço, M.; Almeida, J.: "Adaptive Stress Field Models for Non-Linear Analysis of Structural Concrete

under Reversal Loading”, International Conference on Recent Advances in Nonlinear Models – Structural

Concrete Applications, (CoRAN 2011), Coimbra, 24-25 November 2011.

25. Martins, R.; Ferreira, L.; Costa, H.; Júlio, E.: "Alkali-Activated Lightweight Aggregate Concrete”, 2011 IABSE-

IASS Symposium "Taller, Longer, Lighter", Queen Elizabeth II Conference Centre, London, UK, September

20-23, 2011.

26. Muralha, J.; Cardoso, R.; Maranha das Neves, E.; Caldeira, L.: "Hydro-mechanical characterization of

Jurassic marls to study load degradation", Proc. XV European Conference on Soil Mechanics and


__________________________________________________________________________________________

161

Geotechnical Engineering, 12-15 Sept. 2011, Athens, Greece.

27. Pedro, J.O.; Reis, A.J. – "Stability of composite cable-stayed bridges” – 6th European Conference on Steel

and Composite Structures. Budapest, Hungary, 31 August – 2 September 2011.

28. Reis, A.J.; Pedro, J.O.: "Axially suspended decks for road and railway bridges” – 35th

IABSE International

Symposium on Bridge and Structural Engineering. London, UK – 21-23 Sept. 2011.

29. Reis, A.J.; Pedro, J.O.: "Composite truss bridges: New trends, design and research” – 6th

European

Conference on Steel and Composite Structures. Budapest, Hungary, 31 August – 2 September 2011.

30. Saldanha, R.; Santos, P.; Júlio, E.: Dias-da-Costa, D.: "fib Model-Code 2010 Approach for Concrete-to-

Concrete Interfaces”, 2011 IABSE-IASS Symposium "Taller, Longer, Lighter", Queen Elizabeth II Conference

Centre, London, UK, September 20-23, 2011.

31. Valença, J.; Dias-da-Costa, D.; Júlio, E.; Araújo, H.: "Automatic Integrated System for Monitoring Superficial

Cracks”, 2011 IABSE-IASS Symposium "Taller, Longer, Lighter", Queen Elizabeth II Conference Centre,

London, UK, Sept. 20-23, 2011.

32. Valença, J.; Gonçalves, L.; Júlio, E.: "Assessment of Concrete Surfaces Using Multi-Spectral Image

Analysis", 2011 IABSE-IASS Symposium "Taller, Longer, Lighter", Queen Elizabeth II Conference Centre,

London, UK, Sept. 20-23, 2011.

33. Veludo, J.; Dias-da-Costa, D.; Júlio, E.: "Load Transfer Mechanisms in Existing RC Footings Strengthened

with Textured Micropiles”, 2011 IABSE-IASS Symposium "Taller, Longer, Lighter", Queen Elizabeth II

Conference Centre, London, UK, September 20-23, 2011.

34. Verde, J.; Cardoso, R.; Barradas, J.: "Numerical behavior of a real slope considering climate actions and

comparison with in situ readings”, Proc. XV European Conference on Soil Mechanics and Geotechnical

Engineering, 12-15 Sept. 2011, Athens, Greece.

35. Vieira, R.F.; Virtuoso. F. "Model of a composite beam with deformable connection", Eurosteel 2011 – 6th

European Conference on Steel and Composite Structures Budapest, Hungary, 31 Aug-2 Sept. 2011.


1. Afecto, R.; Pedro, J. O.; Reis, A. J.: "Distorção em Caixões Mistos. Noções Gerais e Aplicação a um Caso

Prático", VIII Congresso de Construção Metálica e Mista, Guimarães, 24-25 November 2011, pp. II-355/363.

2. Brito, J. de; Júlio, E.: "Levantamento e Caracterização de Patologia Exterior de Construções Edificadas em

Portugal entre 1970 e 1995. Dois Casos de Estudos", Semana de Tecnologia e Design, Escola Superior de

Tecnologia e Gestão, Instituto Politécnico de Portalegre, Portalegre, Abril de 2011.

3. Caldeira L.; E. Maranha das Neves & P. Saraiva (2011) "Caracterização de agregados leves em argila

expandida para aplicações em geotecnia", 2º Seminário GeoLeca, Laboratório Nacional de Engenharia Civil,

26 May 2011, Lisboa.

4. Cardoso, R. e Barbedo, D. "Permeabilidade saturada de um geocompósito bentonítico quando percolado

com fluidos diferentes de água”, Proc. 4º Seminário Português sobre Geossintéticos, 22-23 Nov. 2011,

Aveiro, Portugal.


__________________________________________________________________________________________

162

5. Cardoso, R.; Fernandes, V.; Barata, R. e Ribeiro, D. "Comportamento volumétrico de um geocompósito

bentonítico quando sujeito a ciclos de secagem-molhagem”, Proc. 4º Seminário Português sobre

Geossintéticos, 22-23 Nov. 2011, Aveiro, Portugal.

6. Dias-da-Costa, D.; Veludo, J.; Afaiate, J.; Júlio, E.: "Simulação de Fissuração Radial Utilizando Elementos

Enriquecidos”, Congresso de Métodos Numéricos em Engenharia - CMNE 2011, FCTUC, Coimbra, 14-17

June 2011.

7. Júlio, E.; Dias-da-Costa, D.; Valença, J.; Rebelo, C.: "Caracterização Estrutural da Ponte da Praia do

Ribatejo sobre o Rio Tejo”, 2.º Congresso Nacional sobre Segurança e Conservação de Pontes,

Universidade de Coimbra, Coimbra, 29 June-1 July 2011.

8. Mateus de Brito, J.; Santos, J.A.; Baião, C.; Conceição, M. & Chitas, P. (2011). Obras de escavação e de

contenção periférica de edifícios em Luanda. Lições a retirar de casos de obra. 6º Congresso Luso-

Moçambicano Engenharia, Maputo, Mozambique, 29 Aug.-3. Sept, paper ref: 233106R.

9. Pedro, J.O.; Reis, A.J.: "Análise à Rotura de um Tabuleiro Atirantado Misto - Estudo Paramétrico”, VIII

Congresso de Construção Metálica e Mista. Guimarães, 24-25 November 2011, pp. II-667/676.

10. Valença, J.; Dias-da-Costa, D.; Júlio, E.; Araújo, H.: "Sistema Integrado para Detectar e Caracterizar Fissuras

em Superfícies de Betão durante Ensaios Laboratoriais”, Congresso de Métodos Numéricos em Engenharia -

CMNE 2011, FCTUC, Coimbra, 14-17 June 2011.


A.1 Entire books

A.2 Chapters

1. Lourenço, M.; Almeida, J.; Bóia, R.: "Continuous Deep Beam”. in Design examples for strut and tie models,

fib Bulletin 61, Lausanne, pp.45-52, 2011, ISBN: 978-2-88394-101-4

2. Lourenço, M.; Almeida, J.: "Abutment shear wall of Viaduct 1 on Algarve Highway”. in Design examples for

strut and tie models, fib Bulletin 61, Lausanne, pp.117-132, ISBN: 978-2-88394-101-4

3. Reineck, K.-H.; J.; Lourenço, M.; Almeida, J.; Haugerud, S.-A.: "Gaining experience with strut and tie models

for the design of concrete structures”. in Design Examples for strut and tie models, fib Bulletin 61, Lausanne,

pp.197-216, 2011, ISBN: 978-2-88394-101-4

A.3 As editor



1. Júlio, E.; Branco, F. G.; Dias-da-Costa, "Avaliação Estrutural de uma Laje da Escola Secundária João de

Barros em Corroios”, Departamento de Engenharia Civil da Faculdade de Ciências e Tecnologia da

Universidade de Coimbra, 2011.


__________________________________________________________________________________________

163

2. Branco, F. G.; Júlio, E.: "Avaliação do Estado de Conservação de Elementos Estruturais na Escola D. João II

de Santa Maria, em Setúbal”, Departamento de Engenharia Civil da Faculdade de Ciências e Tecnologia da

Universidade de Coimbra, 2011.

3. Estudo de avaliação do risco de aluviões na ilha da Madeira, Coordenação: Betâmio de Almeida, A. e

Proença de Oliveira, R. ; Participantes do Núcleo 4 do ICIST: Santos, J.A.; Lopes, I.; Cardoso, R. - Relatório

Final IST, UMa, LREC-IP-RAM, 2011.

4. Cardoso, R.: Tribunal Arbitral Petrogal vs. Scutvias - Parecer sobre os problemas de Índole Geotécnica

5. Maranha das Neves, E.; Cardoso, R.: Use of Light Weight Expanded Clay Aggregates (LECA) for

geotechnical applications. Research Project with LNEC for Weber Saint-Gobain

6. Santos, J.A.: Tribunal Judicial da Lourinhã – Peritagem e parecer sobre as obras de escavação e aterro de

dois prédios urbanos sitos em Pinhôa, Moita dos Ferreiros.

7. Santos, J.A.: Escola Secundária Gago Coutinho em Alverca. Ensaios e Análise do Desempenho de Estacas

de Trado Contínuo.

8. Calado, L.: "Parecer Técnico sobre a deformada excessiva das treliças TP1 e TP2 do Corpo C da Nova

Biblioteca Pública e Arquivo Regional de Angra do Heroismo”, Relatório ICIST EP nº 26/2011 e Relatório

FUNDEC PS nº 21/2011, Dezembro 2011.

9. Calado, L.; Proença, J. M.: "Parecer Técnico sobre a segurança estrutural do edifício da Rua da Parreira nº

40, 41 e 41A em Cercal do Alentejo”, Relatório ICIST EP nº 27/2011 e Relatório FUNDEC PS nº 22/2011,

Dezembro 2011.




E. Maranha das Neves Soils and Rocks

Jaime Santos ICE Proceeding, Geotechnical Engineering

Luís Calado International Journal of Steel & Composite Structures



Eduardo S. Júlio Construção Magazine (editor-in-chief)

Eduardo S. Júlio Mecânica Experimental

Júlio Appleton Construção Magazine

E. Maranha das Neves Revista "Geotecnia” editada pela SPG, ABMS & ABGE

Jaime A. Santos Revista "Geotecnia” editada pela SPG, ABMS & ABGE, Membro da Comissão

Executiva


__________________________________________________________________________________________

164

Luís Calado Revista Portuguesa de Engenharia de Estruturas




Eduardo S. Júlio 1º CILASCI – Congresso Ibero-Latino-Americano em Segurança contra Incêndios, Natal, Rio Grande do Norte, Brasil, 10-12 Março, 2011


João Almeida fib Symposium: "Concrete engineering for excellence and efficiency”, June 8 - 10, 2011, Prague, Czech Republic


Eduardo S. Júlio 2011 IABSE-IASS Symposium "Taller, Longer, Lighter", Queen Elizabeth II Conference Centre, London, UK, September 20-23, 2011


Eduardo S. Júlio International Conference on Recent Advances in Nonlinear Models - Structural Concrete Applications (CoRAN 2011), Coimbra, Portugal, 24-25 November, 2011


João Almeida fib Symposium: ”Concrete structures

for sustainable community, Stockholm, 2012


Rafaela Cardoso 2nd European Conference on Unsaturated Soils, E-Unsat 2012

Paper Reviewer

Rui Gomes 15th World Conference of Earthquake Engineering, 2012

Paper Reviewer

Rui Gomes 15th World Conference of Earthquake Engineering, 2012

Member of Local Advisory Committee

Rui Gomes 2nd International Conference on Performance-Based Design in Earthquake Geotechnical Engineering, 2012


Isabel Lopes 17th

European Meeting of Environmental and Engineering Geophysics of the Near Surface Geoscience Division of EAGE. Near Surface 2011

Paper Reviewer

Luís Calado STESSA 2012 – International Conference on Behaviour of Steel Structures in Seismic Areas, Santiago, Chile, 2012.


Luís Calado Eurosteel 2011, Budapest, Hungary Member of Scientific Committee



__________________________________________________________________________________________

165



Eduardo S. Júlio 2º Congresso Nacional sobre Segurança e Conservação de Pontes, Univ. Coimbra, Coimbra, 29 June - 1 July, 2011


Júlio Appleton 2º Congresso Nacional sobre Segurança e Conservação de Pontes, Univ.Coimbra, Coimbra, 29 June - 1 July, 2011


Júlio Appleton Encontro Nacional BETÃO ESTRUTURAL – BE2012


João Almeida Encontro Nacional BETÃO ESTRUTURAL – BE2012

President of Scientific Committee

José Câmara Encontro Nacional BETÃO ESTRUTURAL – BE2012


António Costa Encontro Nacional BETÃO ESTRUTURAL – BE2012


Eduardo S. Júlio Encontro Nacional BETÃO ESTRUTURAL – BE2012


E. Maranha das Neves XIII National Congress of Geotechnics, Lisbon, April, 2012

President of Scientific Committee

Rafaela Cardoso XIII National Congress of Geotechnics, Lisbon, April, 2012

Paper reviewer

Rui Gomes XIII National Congress of Geotechnics, Lisbon, April, 2012

Paper reviewer

Teresa Freitas XIII National Congress of Geotechnics, Lisbon, April, 2012

Paper reviewer

Luis Calado VIII Congresso Nacional de Construção Metálica e Mista, Guimarães, 2011.





Eduardo S. Júlio Committee 364 "Rehabilitation” ACI – American Concrete Institute

Eduardo S. Júlio Working Commission 3 "Concrete Structures”

IABSE - International Association for Bridge and Structural Engineering

Eduardo S. Júlio SAG 7 "Assessment and Interventions upon Existing Structures”

fib (Federação Internacional de Betão)

Eduardo S. Júlio Comission 5 – Structural Service Life Aspects


João Almeida Commission 1 – STRUCTURES: Grupo de Trabalho TG1.1.; Design



__________________________________________________________________________________________

166

Applications, WP1.1.3 - Design examples for the application of strut-and-tie models

João Almeida Grupo Trabalho para revisão do Model Code 2010


Júlio Appleton Membro da Comission 5 – Structural Service Life Aspects


Júlio Appleton Representante Português na Comissão CEN TC250/SC2 (Eurocódigo 2) – Regulamento das Estruturas de Betão. Responsável pelo Grupo de Trabalho dos Anexos Nacionais do Eurocódigo 2

CEN TC250/SC2 (Eurocódigo 2)

E. Maranha das Neves Technical Committee on Unsaturated Soils TC-6

Technical Commitee of the International Society of Soil Mechanics and Geotechnical Engineering ISSMGE

Rafaela Cardoso Technical Committee on Unsaturated Soils TC-6


Rui Gomes Technical Committee TC203 - Earthquake Geotechnical Engineering and Associated Problems


Jaime Santos ISSMGE-TC18 International Committee

on Deep Foundations

Jaime Santos ERTC3 European Regional Technical

Committee on Piles

E. Maranha das Neves Comission 115 (Eurocodes)

E. Maranha das Neves Committee on Materials for Fill Dams International Commission on Large

Dams

Luís Calado Membro do ECCS TC10 - Structural Connections

European Convention for Structural Steelwork

Luís Calado Membro do ECCS TC11 - Composite Construction


Luís Calado Representante Português na Comissão do CEN/TC250/SC4

Eurocode 4

Luís Calado Membro do ECCS TC13 - Seismic Design


Luís Calado Membro do ECCS TC10 - Structural Connections






__________________________________________________________________________________________

167

Júlio Appleton Membro da CT115 – Eurocódigos Estruturais (Comissão Técnica Portuguesa de Normalização).

Comissão Técnica Portuguesa de Normalização

Júlio Appleton Grupo de Trabalho relativo à preparação do documento nacional da EN1992-2 (Pontes).


João Almeida Grupo de Trabalho relativo à preparação do documento nacional da EN1992-2 (Pontes).


Júlio Appleton Grupo de Trabalho relativo à preparação do documento nacional da EN1992-3 (Silos e Reservatórios).


José Câmara Grupo de Trabalho relativo à preparação do documento nacional da EN1992-3 (Silos e Reservatórios).


António Costa Grupo de Trabalho relativo à preparação do documento nacional da EN1992-3 (Silos e Reservatórios).


E. Maranha das Neves Coordenador do Grupo de Trabalho do

novo Regulamento de Pequenas

Barragens

Subcomissão dos Regulamentos de

Segurança de Barragens

Luís Calado Membro da CT115 – Eurocódigos

Estruturais (Comissão Técnica

Portuguesa de Normalização).

Comissão Técnica Portuguesa de

Normalização




Event Notes

Eduardo S. Júlio Meeting of the fib Commission 5 "Structural Service Life Aspects”, Lisbon, Portugal, October 10, 2011

Organizer

E. Maranha das Neves VI Luso-Brazilian Congress of Geotechnics

President

Rafaela Cardoso VI Luso-Brazilian Congress of Geotechnics


Jaime Santos VI Luso-Brazilian Congress of Geotechnics


A.2 National events


Event Notes


__________________________________________________________________________________________

168

Eduardo S. Júlio Seminário Reabilitação Low Cost, Centro de Congressos da FIL, Parque das Nações, Lisboa, 4 de Maio de 2011

Organizer

Eduardo S. Júlio Sessão especial Reabilitar ou Renovar?, "2º Congresso Nacional sobre Segurança e Conservação de Pontes”, Universidade de Coimbra, Coimbra, 29 de Junho a 1 de Julho, 2011

Organizer

E. Maranha das Neves XIII National Congress of Geotechnics President

E. Maranha das Neves Course Fundec-LNEC "Design, construction, exploitation and rehabilitation of small dams", LNEC, Lisbon,14 -16 November

Co-coordinator

Rui Gomes XIII National Congress of Geotechnics, Lisbon, April 2012


Teresa Bodas Freitas XIII National Congress of Geotechnics, Lisbon, April 2012





Date

Eduardo S. Júlio 2011 IABSE- IASS Symposium "Taller, Longer, Lighter", Queen Elizabeth II Conference Centre

London, UK 20-23 September

Eduardo S. Júlio International Conference on Recent Advances in Nonlinear Models - Structural Concrete Applications (CoRAN 2011)

Coimbra, Portugal

24-25 November

João Almeida International Conference on Recent Advances in Nonlinear Models – Structural Concrete Applications, (CoRAN 2011)

Coimbra 24-25 November

E. Maranha das Neves 6th International Conference on Dam Engineering, Lisbon.

Lisbon, Portugal

14-17 February

Rafaela Cardoso 6th International Conference on Dam Engineering, Lisbon.

Lisbon, Portugal

14-17 February

Rafaela Cardoso VI Conference on Unsaturated Soils, NSAT Pirenópolis, Brazil

29-31 August

E. Maranha das Neves XV European Conference on Soil Mechanics and Geotechnical Engineering

Athens, Greece

12-15 September

Rafaela Cardoso XV European Conference on Soil Mechanics and Geotechnical Engineering

Athens, Greece

12-15 September

Jaime Santos IS’Seoul - International Symposium on Deformation Characteristics of Geomaterials,

Seoul, South Korea

1-3 September


__________________________________________________________________________________________

169

Ricardo Vieira Eurosteel 2011 Budapest, Hungary

September 2011

Luis Calado Eurosteel 2011 Budapest, Hungary

31 August-2 Sept

A.2 National Events


Eduardo S. Júlio 3rd ISISE Day-Out and PhD Wokshop Unhais da Serra

20-21 Jan.

Eduardo S. Júlio 1as Jornadas de Materiais na Construção Porto 6 Apr.

Eduardo S. Júlio Seminário Reabilitação Low Cost Lisboa 4 May

Eduardo S. Júlio 2º Congresso Nacional sobre Segurança e Conservação de Pontes

Coimbra 29 Jun.-1 Jul.

Júlio Appleton 2º Congresso Nacional sobre Segurança e Conservação de Pontes

Coimbra 29 Jun.-1 Jul

António Costa 2º Congresso Nacional sobre Segurança e Conservação de Pontes

Coimbra 29 Jun.-1 Jul

E Maranha das Neves I Jornadas Tecnológicas da Construção, Teixeira Duarte

Lisboa 8 Nov.

Rafaela Cardoso I Jornadas Tecnológicas da Construção, Teixeira Duarte

Lisboa 8 Nov.

Rafaela Cardoso 4º Congresso Nacional de Geossintéticos Aveiro 22-23 Nov.

Isabel Lopes Workshop GeoSIS_Lx – Modelação e cartografia geológica e geotécnica tridimensional em áreas urbanas. Aplicação a Lisboa. Apresentação de resultados.

Lisboa 4 May

Jaime Santos Workshop GeoSIS_Lx – Modelação e cartografia geológica e geotécnica tridimensional em áreas urbanas. Aplicação a Lisboa. Apresentação de resultados.

Lisboa 4 May



Date

Eduardo S. Júlio Meeting of the fib SAG7 "Assessment and Interventions upon Existing Structures”

Prague, Czech Republic

6-7 Junr

João Almeida Meeting of the fib Commission 1: "Structures”

Prague, Czech Republic

10 June

João Almeida 10th fib General Assembly Prague, Czech Republic

10 June

João Almeida fib Technical Council meeting Prague, Czech 11 June


__________________________________________________________________________________________

170

Republic

Eduardo S. Júlio Meeting of the Scientifc Commission of the 2011 IABSE- IASS Symposium "Taller, Longer, Lighter"

London, UK 19 Sept.

Eduardo S. Júlio 77th Meeting of the Permanent Committee of IABSE

London, UK 19 Sept.

Eduardo S. Júlio Meeting of the fib Commission 5 "Structural Service Life Aspects”

Lisbon, Portugal

10 Oct.

Júlio Appleton Workshop "Eurocode 2: Design of Concrete Buildings”

Brussels, Belgium

20-21 Oct.

Júlio Appleton Meeting of the fib Commission 5:

"Structural Service Life Aspects” Lisbon, Portugal

10 Oct.

António Costa Meeting of the fib Commission 5: "Structural Service Life Aspects”

Lisbon, Portugal

10 Oct.

Rafaela Cardoso Géotechnique Simposium in Print on Compacted Soils

London, UK 20 June

Teresa Freitas Rankine Lecture London, UK 16 March

Teresa Freitas Modelling ultimate limit states (ULS) in geotechnical finite element analysis.

London, UK 16 March



L. Calado: Innovative Connections between Chs-Columns and I-Beams by Laser Cutting Technology (RFCS

Call). In the project there are five research centres (RWTH Aachen, CPR Pisa Research Center, Universitè de

Liège, IST (ICIST) and INSA Rennes), a company specialised in the production of laser cutting machines for

tubes (ADIGE SYS) having as subcontractor a steel fabricator (submitted September)



EU - Research Programme of the Research Fund for Coal and Steel - Dissipative Fuses for Seismic Resistant

Steel Frames (FUSEIS). Period: 2008-2011, Partners: Instituto Superior Técnico (PT), Politecnico di Milano (IT),

National Technical University of Athens (GR), RWTH - Rheinisch-Westfalische Technische Hochschule Aachen

(DE), SIDENOR SA (GR) (Luís Calado and Jorge Miguel Proença, Group 1)


Gomes. R.C.: Project – Seismic analysis and design of underground structures (PTDC/ECM/116828/2010)

(submitted February)

Lopes, I: Project - SWATVIBE - Seismic site characterization for earthquake and vibration studies (PTDC/CTE-

GIX/118067/2010) (submitted February)


__________________________________________________________________________________________

171

Bodas Freitas, T.M. - Effect of temperature on soil-structure interfaces and the behaviour of energy piles

(PTDC/ECM/119592/2010) (submitted February)

PTDC/ECM/117849/2010 - Devices for "smart” seismic protection of steel structures – The SEISPRO project,

Period 2012-2014, Partners IST - Instituto Superior Técnico and FEUP - Faculdade de Engenharia da



Dias da Costa, D. (FCTUC) – IR, Júlio, E. (Group 4), Project "MesoCrete - Concrete Behaviour at Meso-Scale”

(PTDC/ECM/119214/2010)

Júlio, E.; Project "Mobiliário Urbano em UHPFRLWAC” (QREN 18538)

Jorge de Brito (Group 3) – IR, António Costa (Group 4): Betão com agregados reciclados de elevado

desempenho para a indústria da pré-fabricação – EXCELlentSUStainableCONcrete –(PTDC/ECM/118372/2010)

Ferreira, C. (C-TAC/UM) – IR, Santos; J.A.; Lopes I.; R. Gomes (Group 4), Project "WaveSoil - Innovative

seismic wave-based tools for the characterization of damping and anisotropy of soils in routine tests”

(PTDC/ECM/122751/2010)


Júlio, E. – IR (host institution: FCTUC): Project "ISS: Inteligent Super Skin. Enhanced Durability for Concrete

Members” (PTDC/ECM/098497/2008)

Jorge de Brito – IR (Group 3), António Costa (Group 4): Desempenho mecânico e de durabilidade betões

produzidos com agregados finos reciclados obtidos a partir de resíduos da construção e de demolição de

centrais de reciclagem portuguesas 2009 – 2013 (PTDC/ECM/108682/2008)

Vieira, T. – IR (FCTUC), Júlio, E. (Group 4): Project "SeTiverNano: Production of Bricks with Higher Thermal and

Structural Resistance by Incorporation of Nanomaterials” (QREN 13312)

Júlio, E. – IR (host institution: FCTUC): Project "Eco-Façade: Façade Panels in Eco-Efficient Alakali-Activated

Concrete Incorporating Industrial By-Products” (QREN 13285)

José Camara (Group 4), J. Proença (Group 1): PRECASEISMIC – Behaviour of Precast Concrete Structures

under Seismic Actions – Development of High Performance Connections (PTDC/ECM/116161/2009)

Almeida, I. (CG/FFC/FC/UL) – IR, Lopes, I.; Santos, J. (Group 4): Project "GeoSIS_Lx - Subsurface three

dimensional geological and engineering geological mapping and modelling for urban areas. Lisbon case-study”

(PTDC/ECM/64167/2006)

Vilanova, S. (Group 1), Lopes, I.; Santos, J. (Group 4): Project "Site Condition Evaluation for National Seismic

Hazard Estimation (SCENE)” (PTDC/CTE-GIX/103032/2008)

Santos, J.: Project "Tools for performance-based design in liquefiable deposits” (PTDC/ECM/103220/2008)


__________________________________________________________________________________________

172




Organization Date

António Costa Co-supervision of a PhD Thesis (André Monteiro) with Prof. Jean-Paul Balayssac

Univ.Paul Sabatier Toulouse III, France

Rafaela Cardoso Experimental work in the Geotechnical laboratory of Universidad Politécnica de Calatuña, UPC, Barcelona, Spain, using special equipment with suction control

Universidad Politécnica de Calatuña, UPC, Barcelona, Spain

22-23 February

Rafaela Cardoso Experimental work in the Geotechnical laboratory of Universidad Politécnica de Calatuña, UPC, Barcelona, Spain, using special equipment with suction control

Universidad Politécnica de Calatuña, UPC, Barcelona, Spain

12-18 June

E Maranha das Neves Meeting with Saint Gobain related with research using Geoleca© (LNEC-IST)

Trondheim, Norway

18-19 October

E Maranha das Neves Visit to SINTEF research institute in Norway

Trondheim, Norway

18-19 October

Jaime Santos Meeting with Giovanni Cascante University of Waterloo, Canada

10 July

Jaime Santos Meeting with Arezou Modaressi Ecole Centrale de Paris

29 May

Luis Calado Evaluation of an Italian Research Project Italian Ministry for Universities and Research

2011



Organization Date

José Câmara PRECASEISMIC - Behaviour of Precast Concrete Structures under Seismic Actions – Development of High Performance Connections (PTDC/ECM/116161/2009)

FCT – UNL 2011-2013

Eduardo S. Júlio Several R&D projects and supervision of PhD and MSc theses

FCTUC Along 2011

Rafaela Cardoso Book review FEUP Edições August

Isabel Lopes Scientific Project "GeoSIS_Lx – Subsurface three dimensional geological and engineering geological mapping and modelling for urban

areas. Lisbon case-study”

FCUL January to August


__________________________________________________________________________________________

173

Jaime Santos Scientific Project "GeoSIS_Lx – Subsurface three dimensional geological and engineering geological mapping and modelling for urban areas. Lisbon case-study”

FCUL January to August

Jaime Santos Scientific Project – Tools for performance-based design in liquefiable deposits

FCTUC/FEUP All year



António Costa Desempenho mecânico e de durabilidade betões produzidos com agregados finos reciclados obtidos a partir de resíduos da construção e de demolição de centrais de reciclagem portuguesas (PTDC/ECM/108682/2008) in collaboration with Group 3 (Prof. Jorge de Brito)

2009-2013

José Câmara PRECASEISMIC – Behaviour of Precast Concrete Structures under Seismic Actions – Development of High Performance Connections (PTDC/ECM/116161/2009) in collaboration with Group 1 (Prof. Jorge Proença)

2011-2013

António Costa Betão com agregados reciclados de elevado desempenho para a indústria da pré-fabricação – EXCELlentSUStainableCONcrete – (PTDC/ECM/118372/2010) in collaboration with Group 3 (Prof. Jorge de Brito)

2010-2012

Isabel Lopes Scientific Project "Site Condition Evaluation for National Seismic Hazard Estimation (SCENE)”- Group 1 – Susana Vilanova

January to December

Jaime Santos Scientific Project "Site Condition Evaluation for National Seismic Hazard Estimation (SCENE)”- Group 1 – Susana Vilanova

January to December

Eduardo S. Júlio Collaboration with Prof. Jorge Alfaiate in the scope of research projects dealing with FE-based models with embedded discontinuities

Along 2011

Luís Calado Collaboration with Prof. Jorge Miguel Proença in the scope of research projects

2011


A.1 Internacional

A.2 National




__________________________________________________________________________________________

174



Eduardo S. Júlio Journal of Earthquake Engineering, edited by Taylor & Francis, cited on ISI Web of Knowledge

Eduardo S. Júlio Engineering Fracture Mechanics, edited by Elsevier, cited on ISI Web of Knowledge

Eduardo S. Júlio International Journal of Architectural Heritage, edited by Taylor & Francis, cited on ISI Web of Knowledge

Eduardo S. Júlio Experimental Techniques, edited by Wiley, cited on ISI Web of Knowledge

Eduardo S. Júlio Composites Part B, edited by Elsevier, cited on ISI Web of Knowledge

Eduardo S. Júlio Construction and Building Materials, edited by Elsevier, cited on ISI Web of Knowledge

Ricardo Vieira Journal of Structural Engineering, ASCE

Luis Calado Advanced Steel Construction an International Journal

Luis Calado Engineering Structures



Eduardo S. Júlio Construção Magazine, editada pela Publindústria



Eduardo S. Júlio Technical and scientific revision of 7 projects (QREN) Agência de Inovação





José Câmara Sessão Comemorativa dos 40 anos da EPUL – Revisão de Projectos – dos Procedimentos e da Experiência à Cultura de Empresa

EPUL LNEC/ September

José Câmara Seminário – Aplicação do Eurocódigo 8 ao Projecto de Edifícios

Ordem dos Engenheiros

Porto and Lisboa, November

António Costa Seminário – Aplicação do Eurocódigo 8 ao Projecto de Edifícios

Ordem dos Engenheiros

Porto and Lisboa, November

Júlio Appleton Sessão Ponto de Encontro – "Reabilitação e Reforço de Estruturas de Edifícios”

Lisboa e-nova "Agência

3 November 2011


__________________________________________________________________________________________

175

Municipal de Energia e Ambiente”

E Maranha das Neves

Organization of the Course on Risk Management in Dams. Geotechnical Component. LNEC, Lisbon, Risk and risk management of dams

LNEC LNEC, 14th February

E Maranha das Neves

"O Novo Regulamento de Pequenas Barragens", A Engenharia dos Aproveitamentos Hidroagrícolas: actualidade e desafios futuros", Jornadas Técnicas da APRH, LNEC

APRH, LNEC LNEC, 12-15 October

E Maranha das Neves

"A dinamização de I&D associada aos grandes contratos públicos" GESCON 2011, Sistemas de Informação na Construção

Faculdade de Engenharia, Univ. do Porto

FEUP, 27-28 October

E Maranha das Neves

"Geomateriais parcialmente saturados e a sua aplicação prática” – Keynote lecture no I ciclo de conferências "ATecnologia da Construção” organizado pela Teixeira Duarte.

Teixeira Duarte LNEC, 8 November

Rafaela Cardoso Course "Environmental Geotechnics" – "Caracterização geomecânica de resíduos, segurança e funcionalidade do aterro”

FUNDEC / LNEC 14 - 16 March

E. Maranha das Neves

Courses Fundec-LNEC, construção, exploração e reabilitação de pequenas barragens - "Dimensionamento e construção de filtros e drenos", "Técnicas de construção nas interfaces com a fundação e estruturas hidráulicas" e colaborou no módulo "Reabilitação de barragens de aterro".

FUNDEC / LNEC IST, 14 - 16 November

Luís Calado Aplicação dos Eurocódigos Estruturais ao Projecto de Edifícios em Estrutura Mista Aço-Betão

IST / FUNDEC IST, May

Luís Calado Projecto de Edifícios em Estrutura Mista Aço-Betão

IST / FUNDEC CENOR, December


__________________________________________________________________________________________

176

II.18 Models


II.20 Pilot plants

II.21 Prototypes

II.22 Patents

II.23 Miscellaneous

Participation in committees or evaluation panels

João Almeida – Presidente do Grupo Português de Betão Estrutural, membro nacional da fib.

José Câmara – Coordenador da Comissão Executiva da Especialização de Estruturas – Ordem Engenheiros –

Colégio de Engenharia Civil

Júlio Appleton – Membro da Academia de Engenharia

José Câmara – Membro do Júri Prémio Talento Soares da Costa (2010/2011)

José Câmara – Membro do Júri do Prémio Secil Universidades 2010

José Câmara – Membro da Comissão Coordenadora da Secção de Infra-estruturas de Transportes da APPC

(Associação Portuguesa de Projectistas e Consultores)

E. Maranha das Neves - Presidente do Conselho de Administração da FUNDEC, Associação para a Formação

Contínua em Engenharia Civil e Arquitectura

E. Maranha das Neves - Presidente do Conselho da Faculdade de Ciências e Tecnologia da Universidade Nova

de Lisboa

E. Maranha das Neves - Presidente da CAF, Comissão de Acompanhamento e Fiscalização de I&D

relacionados com as prestações que constituem o objecto dos contratos de valor igual ou superior a 25 000 000

de Euros, obrigatórios de acordo com o disposto no nº7 do artigo 42º do Código dos Contratos Públicos

(nomeado por despacho conjunto do Ministro da Ciência, Tecnologia e Ensino Superior e Ministro da Obras

Públicas, Transportes e Comunicações)

E. Maranha das Neves - Membro Secção do Património de Arquitectura e Arqueologia do Conselho Nacional de

Cultura (IGESPAR)


__________________________________________________________________________________________

177

R. Gomes: Member of the Jury of the PhD Thesis of Javier Camacho-Tauta, entitled "Evaluation of the small-

strain stiffness of soil by non-conventional dynamic testing methods” presented in IST/UTL, in July 2011

I. Lopes: Member of the Jury (Rapporteur) of the PhD Thesis of Maria João de Brito Coelho, entitled

"Developments of the surface wave method for geotechnical characterization” presented in IST/UTL, in July

2011.

I. Lopes; J. Santos: Supervisors of the grant of Telma Pinho (M.Sc) under the research project: "GeoSIS_Lx -

Subsurface three dimensional geological and engineering geological mapping and modelling for urban areas.

Lisbon case-study” from April 15th

to June 30

I. Lopes; J. Santos: Supervisors of the grant of João Aldeias (B.Sc) under the research project: "GeoSIS_Lx -

Subsurface three dimensional geological and engineering geological mapping and modelling for urban areas.

Lisbon case-study” from March 15th

to August 15th

I. Lopes; J. Santos: Supervisors of the grant of Francisco Pinto (B.Sc) under the research project: "Site Condition

Evaluation for National Seismic Hazard Estimation (SCENE)” since December 1st

Luís Calado – Membro do Conselho dos Directores - IAESE - International Association of Experimental Structural

Engineering, (2006, -)

Luís Calado – Membro da Direcção da APEE – Associação Portuguesa de Engenharia de Estruturas –

Portuguese Group of IABSE – International Association for Bridge and Structural Engineering (2002,-)

E. Júlio; M. Castro (ed.s), "Construção Metálica”, Construção Magazine N.º 46, 6.º bimestre 2011

E. Júlio; H. Cruz (ed.s), "Estruturas de Madeira”, Construção Magazine N.º 45, 5.º bimestre 2011

E.Júlio (ed.s), "Património em Betão”, Construção Magazine N.º 44, 4.º bimestre 2011

E. Júlio; L. Neves (ed.s), "Gestão de Infra-Estruturas”, Construção Magazine N.º 43, 3.º bimestre 2011

E. Júlio; J. Brito (ed.s), "Envolvente de Edifícios”, Construção Magazine N.º 42, 2.º bimestre 2011

E. Júlio; J. Mendes da Silva (ed.s), "Intervenção no Património da Universidade de Coimbra”, Construção

Magazine N.º 41, 1.º bimestre 2011

ICIST - Instituto de Engenharia de Estruturas, Território e Construção Group 5 -IDSS

__________________________________________________________________________________________

178

RESEARCH GROUP – INFORMATION AND DESIGN

SUPPORT SYSTEMS

RESEARCH GROUP CO-ORDINATOR – PROF. FRANCISCO

REGATEIRO


I.1 Budget

BUDGET (euros)

FCT Other Funding

STRATEGIC PROJECT

FCT

Projects

Int. R&D

Projects


Consultancy Total

11.867,23 38,43 0,00 0,00 11.142,29 23.047,95

I.2 Personnel

PERSONNEL




Phd researchers

Alcínia Zita Almeida Sampaio Assistant Professor

X (50% regime)

Alexandre Bacelar Gonçalves Assistant Professor

X X (50% regime)

Ana Paula Falcão Flor Assistant Professor

X X (50% regime)

Francisco Afonso Severino Regateiro

Assistant Professor

X X (50% regime)

João Afonso Pereira Bento Full Professor X (25% regime)

João Luís Gustavo Matos Researcher X (25% regime)

Joaquim Luís Ramos Dias Assistant Professor

X X (50% regime)

ICIST - Instituto de Engenharia de Estruturas, Território e Construção Group 5 - IDSS

__________________________________________________________________________________________

179

PERSONNEL




Maria de Fátima Silva Tavares Farinha

Coordinator Professor

X (50% regime)

Maria Helena Lima Baptista Braz

Assistant Professor

X (50% regime)

Sandra Isabel Neves Heleno Silva

Researcher (Ciência 2008)

X X (100% regime)

MSc Researchers

António Aguiar Morais da Costa

Research Assistant

X (50% regime)

Carlos Paulo Oliveira da Silva Cruz

Research Assistant

X (50% regime)

Ricardo Jorge Canelas X


Filipe Miguel Torres de Freitas X

Technical staff


Sónia Alexandra Varela Martins

PERSONNEL - RESUME



PhD researchers 10 - - 10

MSc researchers 2 1 - 3

Graduate - 1 - 1

Technical staff - - - -

Administrative staff - - - 1

Others - - - -

Leadership

Since November 2010, Prof. Francisco Regateiro is the coordinator of this Research Group.


__________________________________________________________________________________________

180


Facilities

Laboratory of Geographical Information Systems (software and hardware), used by MSc

students for the GIS-related applications in their theses

Geodetic and surveying equipment used in regular teaching and research

ISTAR - Architecture Research Laboratories, shared with Group 6 (Architecture)

Various software for e-learning, GIS, CAD, BIM, remote sensing and image processing,

geometric modelling and virtual reality, surveying





In progress 4 4


In progress 8 8

Publications



7.67 9


0 0


International 4.3 5

National 0 0



National 5.5 6

Books

Entire 0 0

Chapters 2,5 3

As editor 0 0

Reports 0




International 10

National 0


International 23

National 2


__________________________________________________________________________________________

181


International 0

National 0


International 3

National 0


National 6

Participation in International events abroad



Submitted 2

Awarded 0

In progress 1


Submitted 8

Awarded 1

In progress 5


National 7


National 6






10

Models 0


Pilot plants 0

Prototypes 0

Patents 0



__________________________________________________________________________________________

182




The planned areas of research for 2011 were: 1) Geographic Information Science and Technology, including GIS

theory and its applications, remote sensing applications and topometry applications in Civil Engineering; 2)

Artificial Intelligence Application to Civil Engineering; 3) Geometric Modelling and Virtual Reality; 4) E-learning,

and 5) Enterprise Interoperability.

In the area of Geographical Information Science, developments were expected in areas such as:

Exploitation of SAR imagery for mapping and modelling of floods in the Tagus River.

Investigation of wetland dynamics in the Gorongosa National Park, Mozambique, with SAR imagery.

Modelling and methods for location problems in GIS environments, especially in the development of

software to solve location problems of extensive facilities.

Geographic modelling of international borders.

Gravity, heights and specifications for civil engineering.

In the area of Artificial Intelligence Applications to Civil Engineering, developments were expected in:

Neural networks applications to: modelling of soil constitutive laws, assessment of site effects, evaluation

of the distortional critical stress and half-wave length of cold-formed steel members, prediction of the

lifetime of stone plate revetments in buildings.

Constraint programming and spatial algebra based reasoning applied to the spatial organization inside

buildings.

In the area of Geometric Modelling and Virtual Reality, it was planned the conclusion of a virtual prototype within

the research project concerning building management and maintenance (PTDC/ECM/67748/2006). Also the

conclusion of two interactive models was expected, concerning the maintenance of interior wall and floors.

Results were expected to be disseminated in reports, conferences, journals and books.


One important achievement was the fact that two members have obtained their PhD degrees. One of the works

was on systems to support e-Procurement in Construction, and the other on supporting management of Public

Private Partnerships. These works encompassed participations in national and international events, one

international exchange with Harvard University, and four international peer-reviewed published papers.

The expectations regarding the continuation of scientific production and participation of our group were

exceeded. There was an increase in almost every production and participation indicator comparing with last year.

Regarding the area of Virtual Reality technology applied to Construction and Engineering education, the

prototype within the research project PTDC/ECM/67748/2006 was concluded, one master thesis supervision was

concluded, four papers were published in international journals, thirteen papers were published in international

proceedings, one in national proceedings, four book chapters were published, and one seminar was taught.


__________________________________________________________________________________________

183

In the area of Geographical Information Science, all the planned work was accomplished and well succeeded in

terms of scientific results. The most significant achievement was a paper describing the detection and

quantification (with advanced satellite imagery processing techniques) of urban ground subsidence in the Lisbon

area that was published in the leading journal “Remote Sensing of Environment”. Moreover, six papers were also

published in international proceedings and plus five in national proceedings.

In the area of Artificial Intelligence Applications to Civil Engineering, three papers were published in international

peer-reviewed journals, and another was submitted and is in current revision process.

In the area of E-learning, a paper was published in international peer-reviewed journal, three papers in

international proceedings, and an important contribution was made to the international membership group

indicator.

In the area of Enterprise Interoperability, novel development paths emerged, namely on Sustainable Construction

and Building Information Modelling (BIM).



We maintain the essential objectives from previous years, where the participation in scientific initiatives and the

publication in peer-reviewed international journals are of the utmost importance.

The main areas of research are: 1) Geographic Information Science and Technology, including GIS theory and its

applications, remote sensing applications and topometry applications in civil engineering; 2) Artificial Intelligence

Applications to Civil Engineering; 3) Geometric Modelling and Virtual Reality; 4) E-learning, and 5) Enterprise

Interoperability.

In the area of Geographical Information Science, major efforts are expected in areas such as:

Exploitation of SAR imagery for mapping and modelling of floods in the Tagus River.

Investigation of tectonics and wetland dynamics in the Gorongosa National Park, Mozambique, with SAR

imagery.

Further investigation of ground deformation in the Lisbon area with advanced SAR methods.

Applications of spatial analysis, namely in location problems and in territorial management.

Within Artificial Intelligence Applications to Civil Engineering, the research topics will be:

Neural networks applications to: modeling of soil constitutive laws, assessment of site effects, evaluation

of the distortional critical stress and half-wave length of cold-formed steel members, service life

prediction of rendered façades in buildings.

Support to plan layout generation.

Progresses in the area of E-learning are also expected.

Besides the focus on engineering design support, now also developments on support to engineering

management and decision are expected inside our group, following the recent doctoral work of one of our

members.


__________________________________________________________________________________________

184

In the area of Enterprise Interoperability, new developments and results on Sustainable Construction and BIM are

expected.


A. Ph.D. theses

A.1 Concluded



António Morais Aguiar da Costa

Social e-Business: A New Vision for Construction e-Procurement Platforms

IST/UTL (Dec. 2011)

Civil Engineering

Supervisor: Not from ICIST

Carlos Paulo Oliveira da Silva Cruz

Essays on Infrastructure Public Private Partnerships: Decision, Development and Management

IST/UTL (Dec. 2011)

Civil Engineering

Supervisor: Not from ICIST

A.2 In progress

Student Name Thesis title University (starting year)


Frederico José Rodrigues Henriques

Aplicação de Técnicas de Análise Espacial à Conservação de Pintura

(Applications of Spatial Analysis Techniques in the Conservation of Paintings)

Univ. Católica Portuguesa (2007)

Conservation of Paintings

Alexandre Gonçalves

Helder Filipe Moreira de Sousa

Data-based engineering techniques for the management of concrete bridges

Univ. do Porto (2008)

Civil Engineering

João Bento

João Gabriel Reis de Mariz Graça

Contribuições para o projecto de edifícios confortáveis

(Contributions to the design of comfortable buildings)

IST/UTL (2007)

Engineering Sciences

João Bento

Jorge Manuel Alves Lopes

Traffic Prediction for Unplanned Events on Highways

IST/UTL (2008)

Transport Systems

João Bento


__________________________________________________________________________________________

185


B.1 Concluded



Daniel Patrício Escaleira Rosário

Tecnologia de Realidade Virtual aplicada na manutenção de edifícios: paredes interiores com revestimento em pintura (Virtual Reality technology applied on building maintenance: Painting coats of interior walls)

IST/UTL (Nov. 2011)

Civil Engineering

A. Zita Sampaio

Inês Franco Moreira

Identification of Hazardous Road Locations in Urban Areas through Spatial Analysis – Application to Vila Real (Identificação de Locais de Acumulação de Acidentes Rodoviários em Áreas Urbanas com Recurso a Análise Espacial – Aplicação a Vila Real)

IST/UTL (Nov. 2011)

Civil Engineering


João André Martins Taveira Pinto

Análise Espacial de Indicadores de Qualidade de Serviço de Transportes Públicos (Spatial Analysis of Quality of Service Indicators for Transit Service)

IST/UTL (May 2011)

Territorial Engineering


João Manuel Esperança Venes

Aplicação CAD de Verificação RCCTE. Automatização da Recolha de Informação Relevante em Plantas de Arquitectura (RCCTE CAD Software. Automatic Collection of Relevant Information in Architectural Plans)

IST/UTL (Jun. 2011)

Civil Engineering

Joaquim Dias / Albano Neves e Sousa

Ricardo Abreu Figueiredo

Modelação Geográfica para Avaliação das Linhas de Torres Vedras Enquanto Sistema Defensivo (Geographic Modelling for the Evaluation of the Lines of Torres Vedras as a Defensive System)

IST/UTL (Dec. 2011)

Civil Engineering

Alexandre Gonçalves / Maria Helena Rua

B.2 In progress


(ICIST only)

Ana Teresa Graça Um contributo para a caracterização mecânica e análise sísmica da construção em taipa

(A contribution to the mechanical characterization and seismic analysis of earth buildings)

UEVORA Civil Engineering

Fátima Farinha

António Nuno Câmara

Desenvolvimento de uma ferramenta de apoio à decisão em projectos de construção sustentável

(Development of a decision support tool on sustainable construction projects)

UALG Fatima Farinha


__________________________________________________________________________________________

186

Filipe Freitas Tecnologia de Realidade Virtual aplicada na manutenção de edifícios: Técnicas de diagnóstico e reabilitação do revestimento de pisos (Virtual Reality technology applied on building maintenance: Diagnostic and rehabilitation techniques of floor coverings)


A. Zita Sampaio

Leonardo Manuel Pita Afonso

Monitorização da actividade de manutenção de coberturas de edifícios apoiada em tecnologias de visualização e interacção (Monitoring of maintenance activity of buildings’ roofs through technologies of visualization and interaction)


A.Zita Sampaio / Inês Flores-Colen (Group 3)

Luís Barreto Pimpão

Análise da capacidade de interoperabilidade da tecnologia BIM no projecto de edifícios (Analyses of the interoperability facilities of BIM technology on building design)


A. Zita Sampaio

Paulo Cambra Indicadores de Acessibilidade e Atractividade Pedonal em Meio Urbano - Desenvolvimento de um Quadro de Análise e Implementação em SIG (Pedestrian Accessibility and Atractivity Indicators in Urban Areas – Development of na Analysis and GIS-based Implementation Framework)

IST/UTL Urban Studies and Territorial Management


Paulo Moutinho Neves

Aplicação de tecnologia BIM no projecto de edifícios (BIM technology applied on building design)


A. Zita Sampaio

Pedro Marcos Um contributo para a análise da importância de alguns parâmetros na classe energética de edifícios

(Contribution to the analysis of some parameters to the energy class building)

UEVORA Civil Engineering

Fátima Farinha

Rosa Félix Gestão da Mobilidade em Bicicleta - Necessidades, Factores de Preferência e Ferramentas de Suporte ao Planeamento e Gestão de Redes (Bycicle Mobility Management – Needs, Preference Factors and Support Tools for the Network Planning and Management)

IST/UTL Territorial Engineering




1. Braz, M.H.L.B.; Siqueira, S.W.M.; Rodrigues, D.S.S.; Melo, R.N. (2011): "A semi-automatic strategy for

achieving learning content and practice repurposing", Computers in Human Behavior , V. 27, n.º 4, Elsevier,

Netherlands, July 2011, pp. 1344-1351. DOI: 10.1016/j.chb.2010.07.029 (IF=0.592, NC=0)



https://fenix.ist.utl.pt/teacher/finalWorkManagement.do?method=editFinalDegreeWorkProposal&finalDegreeWorkProposalOID=377995&contentContextPath_PATH=/docencia/docencia&_request_checksum_=0f1970b946d086b8a646f160ed9f16a9a05bbffd





__________________________________________________________________________________________

187

2. Button, K.; Costa, Á.; Costa, F.; Cruz, C. (2011): “Problems of cost recovery by European airlines since

market liberalization”, Transportation Planning and Technology, V. 34, n.º 2, Mar. 2011, pp. 125-138.

DOI:10.1080/03081060.2011.554703 (IF=0,411; NC=0).

3. Cruz, C.O.; Marques, R.C. (2011): "Contribution to the study of PPP arrangements in airport development,

management and operation", Transport Policy, V. 18, n.º 2, Mar. 2011, pp. 392-400. DOI:

10.1016/j.tranpol.2010.12.001 (IF=1.171, NC=1)

4. Cruz, C.O.; Marques, R.C. (2011): “Revisiting the Portuguese experience with public-private partnerships”,

African Journal of Business Management, V. 5, n.º 11, July 2011, pp. 4023-4032. (IF=0.000; NC=0).

5. Dias, J.L.R.; Silvestre, N. (2011): "A neural network based closed-form solution for the distortional buckling

of elliptical tubes", Engineering Structures, V. 33, n.º 6, Elsevier, Netherlands, June 2011, pp. 2015-2024.

DOI: 10.1016/j.engstruct.2011.02.038 (IF=1.363, NC=0)

6. Heleno, S.I.N.; Oliveira, L.G.S.; Henriques, M.J.; Falcão, A.P.; Lima, J.N.P.; Cooksley, G.; Ferretti, A.;

Fonseca, A.M.; Lobo-Ferreira, J.P.; Fonseca, J.F.B.D. (2011): "Persistent Scatterers Interferometry detects

and measures ground subsidence in Lisbon", Remote Sensing of Environment, V. 115, n.º 8, Elsevier, The

Netherlands, Aug. 2011, pp. 2152-2167. (IF=3.954, NC=0)

7. Martins, A.C.; Marques, R.C.; Cruz, C.O. (2011): "Public-private partnerships for wind power generation: the

Portuguese case", Energy Policy, V. 39, n.º 1, Jan. 2011, pp. 94-104. DOI:10.1016/j.enpol.2010.09.017

(IF=2.614, NC=1)

8. Silva, A.; Dias J.L.; Gaspar P.L.; Brito J. de (2011): "Service life prediction models for exterior stone

cladding", Building Research & Information, V. 39, n.º 6, Taylor & Francis, UK, Nov./Dec. 2011, pp. 637-653.

DOI:10.1080/09613218.2011.617095 (IF=1.250, NC=0)

9. Sousa, H.; Félix, C.; Bento, J.; Figueiras, J. (2011): "Design and implementation of a monitoring system

applied to a long-span prestressed concrete bridge", Structural Concrete, V. 12, n.º 2, Ernst & Sohn,

Germany, June 2011, pp. 82-93. DOI: 10.1002/suco.201000014 (IF=0.000, NC=0)




1. Albuquerque, M. O.; Siqueira, S.W.M.; Braz, M.H.L.B.: “Cataloguing and searching musical sound recordings

in an Ontology-Based Information System”. International Journal of Knowledge Society Research (IJKSR),

Vol. 2(4), IGI USA Global, Hershey, 2011, pp. 18-34, October-December 2011.

2. Martins, O.P.; Sampaio, A.Z.: "Bridge launching construction visualized in a virtual environment" IJVR - The

International Journal of Virtual Reality, Editor-in-Chief : Zhigeng Pan, Lab of CAD&CG Zhejiang University,

China, Associate Editors-in-Chief: Nadia Magnenat-Thalmann, Switzerland, Paper 6, pp.49-pp.56, 2011,

10(2):49-56, Volume 10, Number 2, June 2011.

3. Sampaio, A.Z.; Gomes, A.R.; Gomes, A.M., Santos, J.P.; Rosário, D.P.: "Maintenance and construction of

buildings supported on interactive models" IJDST - International Journal of Design Sciences and Technology,

Editor-in-Chief: Reza Beheshti, Khaldoun Zreik, Issue Editor: Gianfranco Carrara, Europia Productions,


__________________________________________________________________________________________

188

Paris, France, V. 18, n.º 1 (2011), pp. 47-63, ISSN 1630-7267.

4. Sampaio, A.Z.; Neves, J.; Martins, B.; Studer, P.; Cruz, C.O.; Martins, O.P.: "Didactic models in Engineering

education supported on Virtual Reality technology", IJSTER - International Journal of Science and

Technology Education Research, V. 2, n.º 5, pp. 75 - 87, May 2011, ISSN 2141-6559 ©2011 Academic

Journals.

5. Sampaio, A.Z.; Santos, J.P.: "Construction planning supported in 4D interactive virtual models" JCECT -

Journal of Civil Engineering and Construction Technology, V. 2, n.º 6, pp. 125-137, June 2011 ISSN 2141-

2634.




1. Besana-Ostman, G.M.; Vilanova, S.P.; Nemser, E; Ferreira, H.; Narciso J.; Falcão, A.P.; Pinheiro, P.,

Fonseca, J. (2011): "The Lower Tagus Valley Fault Zone: Results of recent mapping", XVIII INQUA

Congress, Bern, Switzerland, 21-27 July 2011.

2. Besana-Ostman, G.M; Vilanova, S.P., Falcão, A.P.; Nemser, E.; Ferreira, H.; Heleno, S.; Fonseca, J. (2011):

"Overview, New Insights and Future Challenges on the Lower Tagus Valley Fault Zone", European


Vol. 13, p. 13567.

3. Falcão, A.P.; Gonçalves, A.; Silva, N.; Braz, N.; Lima, J.N.; Araújo, A.V.C.; Trigo Teixeira, A. : "Construction

of an elevation model for the evaluation of estuarine flooding frequency: the case of Lima River, Portugal".

7th International Symposium on Spatial Data Quality (ISSDQ 2011). Coimbra, September 2011.

4. Henriques, M.J.; Lima, J.N.; Falcão, A.P.; Mancuso, M; Heleno, S.: “Land Subsidence in Lisbon: validation of

PSInSar results”. FIG Working Week, Marrakech, Morocco, May 2011.

5. Lira, C.; Falcão, A.P.; Gonçalves, A.; Heleno, S.; Lousada, M.; Matias, M.; Sousa, A.J.; Pereira, M.J.; Pina,

P.; Oliveira, R.; Almeida, A.B. (2011): "Landslide shape modeling from field cartography". European


Vol. 13, p. 11324.

6. Lira, C.; Lousada, M.; Falcão, A.P.; Gonçalves, A.; Heleno, S.; Matias, M.; Sousa, A.J.; Pereira, M.J.; Pina,

P.; Oliveira, R.; Almeida, A.B. (2011): "Automatic detection of landslide features with remote sensing

techniques: application to Madeira Island". 2011 IEEE International Geoscience and Remote Sensing

Symposium (IGARSS 2011), Vancouver, Canada, July 2011, pp. 1997-2000, doi:

10.1109/IGARSS.2011.6049520.

7. Lousada, M.; Lira, C.; Pina, P.; Gonçalves, A., Falcão, A.P.; Heleno, S.; Matias, M.; Sousa, A.J.; Pereira,

M.J.; Oliveira, R.; Almeida, A.B. (2011): "A comparative assessment of supervised pixel-based classification

methods in the detection of landslide scars". European Geosciences Union General Assembly 2011, Vienna,

Austria, April 2011. Geophysical Research Abstracts, Vol. 13, p. 11423.

8. Marques, A.M.; Krejci, R.; Siqueira, S. W. M. ; Pimentel, M. G. ; Braz, M.H.L.B.: “Blogs as User Based Social


__________________________________________________________________________________________

189

Networks for Learning: An Exploratory Study”, World Summit on the Knowledge Society (WSKS 2011),

Mykonos, Greece. 21-23 September, 2011.

9. Oliveira, E. W.; Siqueira, S.W.M.; Braz, M.H.L.B.: “A Social Network for Sharing Learning Segments and

Composions”, World Summit on the Knowledge Society (WSKS 2011), Mykonos, Greece. 21-23 September,

2011.

10. Pereira, M.J.; Falcão, A.P.; Gonçalves, A.; Heleno, S.; Lira, C.; Lopes, S.; Lousada, M.; Matias, M.; Oliveira,

R.P.; Pina, P.; Sousa, A.J.; Almeida, A.B. (2011): "Analysis of factors potentially triggering and/or

constraining landslides occurred during the floods of February 20th, 2010 in Madeira Island". European


Vol. 13, p. 12594.

11. Sampaio, A.Z.; Gomes, A.M.; Gomes, A.R.; Rosário; D.P.: “Building maintenance activity supported in virtual

interactive models: façades and interior walls” XII DBMC – 12th International Conference on Building

Materials and Components, 12 - 15 April 2011, Porto, Portugal, FEUP edições, Colecções. Colectâneas. 20,

ISBN 978-972-752-132-6, ed. Vasco P. Freitas, Helena Corvacho, Michael Lacasse, Vol. 4, pp. 2177-2184.

12. Sampaio, A.Z.; Gomes, A.M.; Gomes, A.R.; Rosário; D.P.: “Interactive virtual model as a support to the

maintenance activity of buildings” EG-ICE European Group for Intelligent Computing in Engineering,

Workshop 2011, 6-8, July 2011 Twente University, The Netherlands. Proceedings of the 2011 eg-ice

Workshop, Editors: Timo Hartmann, Pieter de Wilde and Yaqub Rafiq, ISBN: 978-90-365-3216-7, ID: 26

13. Sampaio, A.Z.; Gomes, A.M.; Gomes, A.R.; Rosário; D.P.: “Maintenance of buildings supported in interactive

models: Interior and exterior walls”, CENTERIS’2011 - International Conference on ENTERprise Information

Systems, Vilamoura, Algarve, Portugal, October 5-7, 2011, extended abstract pp. 19, CD rom ISBN 978-

989-07433-0-4.

14. Sampaio, A.Z.; Gomes, A.M.; Gomes, A.R.; Rosário; D.P.: “Virtual Reality technology used to support the

buildings inspection activity” MMEDIA 2011 - The Third International Conferences on Advances in

Multimedia, Editors: Dumitru Dan Burdescu, University of Craiova, Romania, Philip Davies, Bournemouth

and Poole College, UK, David Newell, Bournemouth University, UK, April 17-22, 2011, Budapest, Hungary,

pp. 80-86. ISBN: 978-1-61208-005-5, copyright (c) IARIA, 2011.

15. Sampaio, A.Z.; Gomes, A.R.: “Virtual Reality technology as a support to the maintenance activity of

buildings” VRAP - 5th International Conference on Advanced Research in Virtual and Rapid Prototyping,

September 28 to October 1, 2011, Leiria, Portugal, book: Innovative developments in virtual and physical

prototyping , 2011, ed. P.J. Bártolo et al., published by Taylor & Francis. ISBN: 978-0-415-68418-7, pp. 661-

666.

16. Sampaio, A.Z.; Gomes, A.R.; Gomes, A.M.: “Maintenance and inspection of façades of building supported

on Virtual Reality technology” eCAADe 2011 - Education and Research in Computer Aided Architectural

Design in Europe, (Eds.) Tadeja Zupancic, Matevz Juvancic, Spela Verovsek, Anja Jutraz, University of

Ljubljana, Faculty of Architecture, Slovenia, 1st Edition, Ljubljana (Slovenia), 21-24 September, 2011. pg

332-338. ISBN 978-9-4912070-1-3 Copyright © 2011.


construction of buildings supported on virtual interactive models” EuropIA - 13th International Conference on

Advances in Design Sciences and Technology, June 8-10, 2011, Rome, Italy. Ed. Gianfranco Carrara,

António Fioravanti, Armando Trento, Sapienza University of Rome, Dipartimento de Ingegneria Civile, Edile


__________________________________________________________________________________________

190

e Ambientale. ISBN: 979-1-090094-05-5, Europia productions, 2011, pp. 67-82.


construction of buildings supported on Virtual Reality technology” CISTI'2011 - 6ª Conferência Ibérica de

Sistemas e Tecnologias de Informação, ed. Álvaro Rocha, Ramiro Gonçalves, Manel Perez Cota, Luís Paulo

Reis, ISBN: 978-989-96247-5-7, Chaves, Portugal, 15 - 18 Junho, 2011, pp. 33-36.

19. Sampaio, A.Z.; Gomes, A.R.; Santos, J.P.: “Virtual Environment in Civil Engineering: Construction and

Maintenance of Buildings” ADVCOMP 2011 - The Fifth International Conference on Advanced Engineering

Computing and Applications in Sciences, Lisbon, Portugal, November 20-25, 2011, pp. 13-20.

20. Sampaio, A.Z.; Santos, J.P.: “Interactive Models Supporting Construction Planning” CENTERIS 2011 -

International Conference on ENTERprise Information Systems, Vilamoura, Algarve, Portugal, October 5-7,

2011. Proceedings, Part II, Series: Communications in Computer and Information Science, Vol. 220, Cruz-

Cunha, M.M.; Varajao, J.; Powell, P.; Martinho, R. (Eds.), 1st Edition., 2011, Softcover, ISBN 978-3-642-

24354-7, pp. 40-50.

21. Santos, J. C. P. ; Fritzen, E. ; Siqueira, S. W. M. ; Andrade, L. C. V. ; Braz, M.H.L.B.: ”Improving the

Efficiency of Web Searches in Collaborative Learning Platforms”, World Summit on the Knowledge Society

(WSKS 2011), Mykonos, Greece. 21-23 September, 2011.

22. Santos, J.P.; Sampaio, A.Z.: “Construction planning supported in Virtual Reality models” EG-ICE European

Group for Intelligent Computing in Engineering, Workshop 2011, 6-8, July 2011 Twente University, The

Netherlands. Proceedings of the 2011 eg-ice Workshop, Editors: Timo Hartmann, Pieter de Wilde, and

Yaqub Rafiq, ISBN: 978-90-365-3216-7, ID: 28.

23. Santos, J.P.; Sampaio, A.Z.: “Interaction and Visual Simulation in a Construction Environment, PECCS 2011

– 1st International Conference on Pervasive and Embedded Computing and Communication Systems,

SIMIE 2011 - Special Session on Simulation and Interaction in Intelligent Environments, 5-7 March, 2011,

Hotel Tivoli Victoria, Vilamoura, Portugal, pp. 545-550.

24. Santos, J.P.; Sampaio; A.Z.: “Virtual Reality technology used to support planning construction project of

buildings” ViNOrg’11 - 1st International Conference on Virtual and Networked Organizations Emergent

Technologies and Tools, 9-10, July 2011 Ofir, Portugal. Ed. Goran D. Putnik and Maria Manuela Cruz-

Cunha, ID: 2.


1. Amorim, A.; Gonçalves, A.; Nunes, L.M.; Sousa, A.J. (2011): “Optimização da localização de estações

meteorológicas”. 15.º Congresso da Associação Portuguesa de Investigação Operacional, Coimbra, Portugal,

Abril de 2011.

2. Falcão, A.P.; Gonçalves, A.; Silva, N.; Braz, N.; Lima, J.N.; Araújo, A.; Trigo-Teixeira, A. (2011): “A

construção de um modelo altimétrico para a avaliação da frequência de inundação estuarina: exemplo do rio

Lima”. Actas da VII Conferência Nacional de Cartografia e Geodesia, Porto, Portugal. Maio de 2011.

3. Heleno, S.; Oliveira, L.; Henriques, M.J.; Falcão, A.P.; Lima, J.N.; Lobo-Ferreira, J. (2011): “SUBSIN –

Utilização do INSAR na detecção e caracterização de subsidência na região de Lisboa”. Actas da VII

Conferência Nacional de Cartografia e Geodesia, Porto, Portugal, Maio de 2011.

4. Moreira, I.; Gonçalves, A.; Shrubsall, S. (2011): “Análise espacial de acidentes rodoviários em Vila Real”.


__________________________________________________________________________________________

191

Actas da VII Conferência Nacional de Cartografia e Geodesia, Porto, Portugal. Maio de 2011.

5. Pina, P.; Falcão, A.P.; Gonçalves, A.; Heleno, S.; Lira, C.; Lousada, M.; Matias, M.; Oliveira, R.; Pereira, M.J.;

Sousa, A.J.; Almeida, A.B. (2011): “Detecção de deslizamentos causados pelo evento de 20 de Fevereiro de

2010 na ilha da Madeira com imagens de satélite, ortofotos, modelos digitais de terreno e dados de campo”.

Actas da VII Conferência Nacional de Cartografia e Geodesia, Porto, Portugal, Maio de 2011.

6. Sampaio, A.Z.; Gomes, A.M.; Gomes, A.R.; Santos, J.: “Planeamento da construção e manutenção de

fachadas de edifícios apoiados na tecnologia de Realidade Virtual” CMNE 2011 Congresso de Métodos

Numéricos em Engenharia. Sessão temática de Processamento de imagem e visualização, Organizadores:

João Manuel R. S. Tavares e Xavier Roca, Coimbra, Portugal, de 14 a 17 de Junho de 2011. Publicação

APMTAC. Ed. António Tadeu, Isabel Narra Figueiredo, Luís Filipe Menezes, CDRom- 10pgs, artigo ID 32.


A.1 Entire books

A.2 Chapters

1. Sampaio, A.Z.; Cruz, C.O.; Martins, O.P.: Chapter “Didactic models in Civil Engineering education: Virtual

simulation of construction works” Book: Virtual Reality, Jae-Jin Kim (Ed.), ISBN: 978-953-307-518-1, Publ.

InTech, 2011, chap. 29, pp. 591 – 610.

2. Sampaio, A.Z.; Santos, J.P.: Chapter “Interactive Models Supporting Construction Planning” Part II, Series:

Communications in Computer and Information Science, Vol. 220, Cruz-Cunha, M.M.; Varajao, J.; Powell, P.;

Martinho, R. (Eds.), 1st Edition., 2011, Softcover, ISBN 978-3-642-24354-7, pp. 40-50.

3. Sampaio, A.Z.; Gomes, A.R.: Chapter “Virtual Reality technology as a support to the maintenance activity of

buildings” book: Innovative developments in virtual and physical prototyping , 2011, ed. P.J. Bártolo et al.,

published by Taylor & Francis. ISBN:978-0-415-68418-7, pp. 661-666.

A.3 As editor



1. Estudo de avaliação do risco de aluviões na ilha da Madeira, Coordenação: Betâmio de Almeida, A. e

Proença de Oliveira, R.; Participantes do Núcleo 5 do ICIST: Heleno, S.; Falcão, A.P.; Gonçalves, A. - Relatório

Final IST, UMa, LREC-IP-RAM, 2011.





__________________________________________________________________________________________

192

A.Z. Sampaio Journal of Civil Engineering and Construction Technology (JCECT)

A.Z. Sampaio International Journal of Advanced Computer Science and Applications (IJACSA)

A.Z. Sampaio Advances in Civil Engineering (ACE)

A.Z. Sampaio Journal of Civil Engineering and Architecture (JCEA)

A.Z. Sampaio Automation in Construction

A.Z. Sampaio Bonfring International Journals

Maria Helena Braz International Journal of Technology Enhanced Learning (IJTEL)ISSN (Online): 1753-5263 - ISSN (Print): 1753-5255, Inderscience Publishers Ltd

Maria Helena Braz International Journal of Knowledge Society Research (IJKSR) ISSN: 1947-8429, EISSN: 1947-8437, IGI Global

Maria Helena Braz International Journal of Learning Technology (IJLT) ISSN (Online): 1741-8119 - ISSN (Print): 1477-8386,Inderscience Publishers Ltd

Fátima Farinha International Journal of Computer Integrated Manufacturing





A.Z. Sampaio Book: Didactic Strategies and Technologies for Education Incorporating Advancements, Publisher: IGI-Global.

Editorial Review Board

A.Z. Sampaio ICEE 2011, International Conference on Engineering Education, University of Ulster in Newtownabbey, Belfast, Northern Ireland, UK, Aug. 21-26, 2011.

Scientific committee (reviewer)

A.Z. Sampaio CISTI'2011, 6ª Conferência Ibérica de Sistemas e Tecnologias de Informação, Chaves, Portugal, 15 - 18 Junho 2011.


A.Z. Sampaio EuropIA 13, 13th International Conference on Advances in Design Sciences and Technology, Sapienza University, Dept. of Civil, Building and Environment Engineering, Rome, June 8-10, 2011.


A.Z. Sampaio WinVR 2011, World Conference on INnovative Virtual Reality, Politecnico di Milano, Italy, June 27-29, 2011


Maria Helena Braz ICEM & SIIE 2011 International Council for Educational Media & Simpósio Internacional de Informática Educativa, Aveiro, Portugal

Program committee / Reviewer


__________________________________________________________________________________________

193

Maria Helena Braz eL&mL 2011, International Conference on Mobile, Hybrid, and On-line Learning 2011, Gosier, Guadeloupe, France


Maria Helena Braz Euro American Conference on Telematics and Information Systems, EATIS 2012, Valencia, Spain


Maria Helena Braz IADIS Conferência Ibero-Americana WWW/Internet (CIAWI 2011), Rio de Janeiro, Brasil.


Maria Helena Braz IADIS Mobile Learning 2011 Conference, Avila, Spain


Maria Helena Braz IASTED International Conference on Computers and Advanced Technology in Education, CATE 2011, July 11 – 13, 2011,Cambridge, United Kingdom.


Maria Helena Braz IASTED TEL 2011 -Technology for Education and Learning, October 24 – 25, 2011, Beijing, China.


Maria Helena Braz IASTED TE 2011 - Technology for Education, December 14 – 16, 2011,Dallas, USA


Maria Helena Braz ICEE-2011 17th International Conference on Engineering Education: Engineering Sustainability for a Global Economy, Belfast, Aug. 21-26, 2011.


Maria Helena Braz 16th IBIMA Conference, Kuala Lumpur, Malaysia 29-30 June 2011


Maria Helena Braz 17th IBIMA Conference, Milan, Italy, 14-15 November 2011


Maria Helena Braz World Summit on the Knowledge Society, Mykonos, Greece, 21-23 September 2011,

Scientific committee

Maria Helena Braz 2nd International Conference on Technology Enhanced Learning, Reforming Education and Quality of Teaching - TECH-EDUCATION 2011, Corfu, Greece

Scientific committee

Francisco Regateiro 13th

International Conference on Enterprise Information Systems (ICEIS, www.iceis.org)

Program Committee / Reviewer

Fátima Farinha CONVR2011 – 11th International

Conference on construction Applications of Virtual Reality 2011

Scientific Committee

Fátima Farinha CC2011 – The Thirteenth International Conference on civil, Structural, Environmental Engineering Computing

Editorial board

Fátima Farinha EuropIA 13 – 13th

International Conference on Advances in Design

International Advisory Board


__________________________________________________________________________________________

194

Sciences and Technology

Fátima Farinha ICEUBI2011 – International Conference on Engineering UBI2011

Scientific Committee




Sampaio, A.Z. Projecto nº 23239: Green Façade Evaluation of QREN Projects (Agência de Inovação)

Sampaio, A.Z. Projecto nº 23224: OYKOS - Habitação Sustentável & Equalizador Paramétrico Autónomo

Evaluation of QREN Projects (Agência de Inovação)






Event Notes

A.Z. Sampaio CISTI'2011 - 6ª Conferência Ibérica de Sistemas e Tecnologias de Informação, Chaves, Portugal, 15 - 18 Junho, 2011, Session: Knowledge Management and Decision Support Systems.

Chairperson in technical session

A.Z. Sampaio CENTERIS 2011 - International Conference on ENTERprise Information Systems, Vilamoura, Algarve, Portugal, October 5-7, 2011. Session: 3C


A.Z. Sampaio ADVCOMP 2011, The Fifth International Conference on Advanced Engineering Computing and Applications in Sciences, Lisbon, Portugal, November 20-25, 2011, Session: ADVCOMP 2 - Computational Geometry.


A.2 National events




__________________________________________________________________________________________

195


Date

A.Z. Sampaio PECCS 2011 – 1st International Conference on Pervasive and Embedded Computing and Communication Systems

Vilamoura, Portugal

5 -7 March

A.Z. Sampaio XII DBMC – 12th International Conference on Building Materials and Components

Porto, Portugal 12 - 15 April

A.Z. Sampaio MMEDIA 2011 - The Third International Conferences on Advances in Multimedia

Budapest, Hungary

17 - 22 April

A.Z. Sampaio EuropIA - 13th International Conference on Advances in Design Sciences and Technology

Rome, Italy 8 -10 June

A.Z. Sampaio CISTI'2011 - 6ª Conferência Ibérica de Sistemas e Tecnologias de Informação

Chaves, Portugal

15 – 18 June

A.Z. Sampaio EG-ICE - European Group for Intelligent Computing in Engineering

Twente, The Netherlands

6 - 8 July

A.Z. Sampaio ViNOrg’11 - 1st International Conference on Virtual and Networked Organizations Emergent Technologies and Tools

Ofir, Portugal 9 - 10, July

A.Z. Sampaio eCAADe 2011 - Education and Research in Computer Aided Architectural Design in Europe

Ljubljana, Slovenia

21 - 24 September

A.Z. Sampaio VRAP - 5th International Conference on Advanced Research in Virtual and Rapid Prototyping

Leiria, Portugal

28 September – 1 October

A.Z. Sampaio CENTERIS 2011 - International Conference on ENTERprise Information Systems

Vilamoura, Portugal

5 - 7 October

A.Z. Sampaio ADVCOMP 2011 - The Fifth International Conference on Advanced Engineering Computing and Applications in Sciences

Lisbon, Portugal

20 - 25 November

Alexandre Gonçalves EGU2011 – European Geosciences Union General Assembly

Vienna, Austria

April

Alexandre Gonçalves IGARSS 2011 – IEEE International Geoscience and Remote Sensing Symposium

Vancouver, Canada

July

Alexandre Gonçalves ISSDQ 2011 – 7th International Symposium on Spatial Data Quality

Coimbra, Portugal

September

Maria Helena Braz World Summit on the Knowledge Society (WSKS 2011)

Mykonos, Greece

21-23 September

Ana Paula Falcão 96th Journees Luxembourgeoises de Geodynamique

Luxemburg October

Ana Paula Falcão EGU2011 – European Geosciences Union General Assembly

Vienna, Austria April

Ana Paula Falcão IGARSS 2011 – IEEE International Geoscience and Remote Sensing Symposium

Vancouver, Canada

July


__________________________________________________________________________________________

196

Ana Paula Falcão ISSDQ 2011 – 7th International Symposium on Spatial Data Quality

Coimbra, Portugal

September

Ana Paula Falcão FIG Working Week 2011 Marrakech, Marocco

May

João Bento The 7th biennial Building Simulation Conference of IBPSA-Canada,

Halifax, Canada

2-3 May

João Bento Transport Research Board 90th Annual Meeting

Washington DC, USA

23-27 January

Fátima Farinha ICEUBI2011 – International Conference on Engineering UBI2011

Covilhã, Portugal

28-30 November

Sandra Heleno EGU2011 – European Geosciences Union General Assembly

Vienna, Austria April

Sandra Heleno IGARSS 2011 – IEEE International Geoscience and Remote Sensing Symposium

Vancouver, Canada

July

Sandra Heleno 96th Journees Luxembourgeoises de Geodynamique

Luxembourg October

Sandra Heleno FIG Working Week 2011, Bridging the Gap

between Cultures

Marrakech,

Morocco

May

Carlos Oliveira Cruz GiM-IREA Workshop Barcelona, Spain

25 May

A.2 National Events


A.Z. Sampaio CMNE 2011 Congresso de Métodos Numéricos em Engenharia.

Coimbra 14-17 June

Alexandre Gonçalves VII Conferência Nacional de Cartografia e Geodesia

Porto 5-6 May

Alexandre Gonçalves 15.º Congresso da Associação Portuguesa de Investigação Operacional

Coimbra 18-20 April

Ana Paula Falcão VII Conferência Nacional de Cartografia e Geodesia

Porto 5-6 May

Sandra Heleno VII Conferência Nacional de Cartografia e Geodesia

Porto 5-6 May

António Costa Gescon 2011 – Information Technologies in Construction

Porto 27 October





__________________________________________________________________________________________

197

Farinha, F.: REHAB-0 – Nearly Zero Energy Building Refurbishment in warm climates, including high thermal

mass and traditional techniques – guidelines for local administration in warm climates – Intelligent Energy Europe

CIP-IEE-2011

Heleno, S. (IR), Falcão, A.P.; Gonçalves, A.: SATURM – Very High Resolution Satellite Imagery for Urban

Malaria Vector Control - FP7-307347 (European Research Council Starting Grant)



MIAVITA, EU (Collaborative project 211393-FP7-ENV-2007-1): Sandra Heleno, Alexandre Gonçalves, Ana Paula

Falcão (ICIST Research Group 5)


Sampaio, A.Z., Gomes, A.M.; Camarinha, R.: Project "Gestão da manutenção de edifícios apoiada nas

tecnologias BIM e de Realidade Virtual (RV) - Maintenance management support on Building Information

Modelling (BIM) and Virtual Reality (VR) technologies", (PTDC/ECM/122430/2010, submitted February)

Regateiro, F.: Project "Organização de Espaços em Edifícios Baseada em Restrições - Constraint Based

Building Spatial Organization (PTDC/ECM/121832/2010, submitted February)

Heleno, S.: Project "ARTHUR – Advanced SAR Methods to Research the Tectonics and Hydrology of the Urema

Rift, Mozambique", (PTDC/CTE-GIX/118184/2010, submitted February)

Loupa Ramos, I. (CESUR/IST) – IR, Gonçalves, A. (Group 5): Project "PERIURBAN - Areas peri-urbanas

perante os desafios da sustentabilidade: desenvolvimento de cenários para a AML" (PTDC/AUR-

AQI/117305/2010, submitted February)

P. Pina (CERENA/IST) – IR, Heleno, S.; Gonçalves, A.; Falcão, A.P. (Group 5): Project AULIS - Inventariação

automática de deslizamentos com base em imagens de elevada resolução especial" (PTDC/ECM/116611/2010,

submitted February)

J. de Brito (ICIST Group 3), A. Gonçalves (Group 5): Project "R3CDW - Recuperação, Reutilização e Reciclagem

de Resíduos da Construção e Demolição" (PTDC/AAC-AMB/119498/2010, submitted February)

M. Mancuso (LNEC) – IR, Gonçalves, A. (Group 5): Project "LXSink - Riscos geotécnicos em áreas urbanas.

Subsidência na cidade de Lisboa" (PTDC/ECM/121461/2010, submitted February)

M.A.V.C. Araújo (CEHIDRO/IST) – IR, Falcão, A.P., Gonçalves, A. (Group 5): Project "EstuarineFlood -

Modelação de inundações estuarinas considerando a variação do nível do mar2 (PTDC/AAC-CLI/121210/2010,

submitted February)


I. Loupa Ramos (CESUR/IST) – IR, Gonçalves, A. (Group 5): Project "PERIURBAN - Areas peri-urbanas perante


__________________________________________________________________________________________

198

os desafios da sustentabilidade: desenvolvimento de cenários para a AML" (PTDC/AUR-AQI/117305/2010)


Sampaio, A.Z., Gomes, A.M.; Costa, A.: Tecnologia de Realidade Virtual aplicada como ferramenta de apoio no

planeamento da manutenção de construções - Virtual Reality Technology applied as a support tool to the

planning of construction maintenance (Projecto PTDC/ECM/67748/2006) (1 Jan 2008 – 30 Jun 2011)

S. Heleno, A. Gonçalves, A.P. Falcão: FCT grant for project RIVERSAR – “Exploração de imagens SAR para

aperfeiçoar modelos de inundação no Rio Tejo” (PTDC/CTE-GIX/099085/2008)

A. Gonçalves: Project "GUIOMAR - Interface Geo(gráfica) para Modelação Costeira e Marinha"

(PTDC/AMB/67450/2006)

Besana-Ostman, G.M. (ICIST Group 1), A.P. Falcão, S. Heleno: Project FINDER, FCT (Fault Investigation with

LiDAR for Earthquake Reassessment, PTDC/CTE-GIX/113866/2009)

Fonseca, J. (ICIST Group 1), A. P. Falcão: Project "RETURN – Recorrência de Sismos e Tsunamis Raros"

(PTDC/CTE-GIN/67367/2006)




Organization Date

Maria Helena Braz Member of project "Representação e recuperação contextualizada de conteúdos de aprendizagem", financed by Fundação Carlos Chagas Filho de Amparo à Pesq. do Estado do Rio de Janeiro

Dep. Informática Aplicada / Univ. Federal do Estado do Rio de Janeiro, Brazil

January - December

Fátima Farinha SUSCON-IP - SUSCON – Sustainable Construction - Principles, Tools and Methods (Erasmus Intensive Programme)

Frederick University, Cyprus

July

Sandra Heleno Preparatory meetings for submission of FP7 proposal SATURM with Programa Nacional de Controlo da Malária (PNCM)

PNCM, Mozambique

September,

October

Sandra Heleno Preparatory meetings for submission of FP7 proposal SATURM

ISCISA, Mozambique

September, October

Sandra Heleno Meetings and fieldwork: instalation of corner reflector in Gorongosa National Park, Mozambique

Gorongosa National Park Scientific Services, Mozambique

August, December

Sandra Heleno Meeting to plan RADARSAT-2 imagery acquisition

Canada Centre for Remote Sensing, Canada

October



__________________________________________________________________________________________

199


Organization Date

A.Z. Sampaio Evaluation of Projects CREN (Projecto nº 23239: Green Façade)

Agência de Inovação, S.A.

November

A.Z. Sampaio Evaluation of Projects CREN (Projecto nº 23224: OYKOS - Habitação Sustentável & Equalizador Paramétrico Autónomo)

Agência de Inovação, S.A.

November

Alexandre Gonçalves Co-supervision of a PhD thesis with Prof. Ana Calvo (Univ. Complutense de Madrid and Univ. Católica Portuguesa)

Univ. Católica Portuguesa

2011

Sandra Heleno Alexandre Gonçalves Ana Paula Falcão

Estudo de Avaliação do Risco de Aluviões na Ilha da Madeira (Risk Assessment Study of Alluviums in Madeira Island)

CEHIDRO (IST), CERENA (IST)

2011

Sandra Heleno Alexandre Gonçalves Ana Paula Falcão

Project "RIVERSAR" LNEC (Lab. Imagem), CEHIDRO and ARHTejo

2011

Alexandre Gonçalves Ana Paula Falcão

Joint research with CEHIDRO for the modelling of estuarine floods in the Lima River estuary

CEHIDRO (IST) 2011

Alexandre Gonçalves Joint research with L. Nunes (UAlg) and A.J. Sousa (Cerena, IST)

Univ. Algarve, CERENA (IST)

2011



A.Z. Sampaio, A. M. Gomes (Group 3); António Costa

Virtual Reality Technology applied as a support tool to the planning of construction maintenance (PTDC/ECM/67748/2006)

Jan. 2008 – Jun. 2011

Alexandre Gonçalves Co-supervision of a thesis with Maria Helena Rua (ICIST Group 6)

2011

Alexandre Gonçalves, Ana Paula Falcão, Sandra Heleno

Project MIAVITA – “Mitigate and Assess Risk from Volcanic Impact on Terrain and Human Activities” (FP7-ENV-2007-1-211393) (with group 1)

2011

J. Fonseca, S. Vilanova, E. Nemser, G. Besana-Ostman (group 1), Sandra Heleno, Ana Paula Falcão (group 5)

Project FINDER – “Investigação de falhas geológicas com recurso a LiDAR para reavaliação da actividade sísmica” (Investigation of geological faults using LiDAR for reassessment of seismic activity) (PTDC/CTE-GIX/113866/2009)

2011

Joaquim Dias Co-supervision of an MSc thesis with Albano Neves e Sousa (ICIST Group 3)

2011

Helena Rua (RG6) / Alexandre Gonçalves

Projecto: “Análise Histórica e Território. Contributo para o estudo da defesa de Lisboa – as Guerras Peninsulares”.

2010 - Present


A.1 Internacional


__________________________________________________________________________________________

200


Organization Date

Carlos Oliveira Cruz Research activities with José Gomez-Ibañez.

Harvard University, USA

Feb. to May, 2011

A.2 National


Organization Date

A.Z. Sampaio Lecture of course “Desenho Assistido por Computador”

Academia Militar Mar.-Jul. 2011

A.Z. Sampaio Lecture of course “Desenho Técnico” Academia Militar Sep.-Dez. 2011

Ana Paula Falcão Lecture of course “Topografia” for the Aerodrome Engineering course

Academia da Força Aérea

Oct. 2010-Feb. 2011

Alexandre Gonçalves Lecture of course “Topografia” for the Aerodrome Engineering course

Academia da Força Aérea

Oct. 2010-Feb. 2011

Francisco Regateiro Tutor of course “Tópicos de Informática” Universidade Aberta

Feb.-Jul. 2011

Francisco Regateiro Tutor of course “Programação” Universidade Aberta

Sep.2010-Jan. 2011





A.Z. Sampaio Revision of 1 paper for Automation in Construction

A.Z. Sampaio Revision of 3 papers for Journal of Civil Engineering and Architecture

A.Z. Sampaio Revision of 1 paper for Advances in Civil Engineering

A.Z. Sampaio Revision of 2 papers for International Journal of Advanced Computer Science and Applications

A.Z. Sampaio Revision of 7 papers for Journal of Civil Engineering and Construction Technology

Alexandre Gonçalves Revision of 1 paper for the International Journal of Geographical Information Science

Maria Helena Braz Revision of 1 paper for the Transactions on Systems, Man, and Cybernetics - Part A: Systems and Humans

Maria Helena Braz Revision of 8 papers for the International Journal of Learning Technology (IJLT)

Carlos Oliveira Cruz Revision of 1 paper for Transportation Research Part E


__________________________________________________________________________________________

201

Carlos Oliveira Cruz Revision of 1 paper for Local Government Studies







A.Z. Sampaio Course “Tecnologias de Informação na Construção BIM e RV”

Fundec Lisboa, Nov.


Conference “Um novo modelo de caminho de menor custo em SIG”

Sociedade de Geografia de Lisboa

Lisboa, 12 Oct.

Ana Paula Falcão Conference “O modelo de ondulação do geóide em Lisboa”

Sociedade de Geografia de Lisboa

Lisboa, 9 Nov.

Ana Paula Falcão Seminar on Remote Sensing Sociedade de Geografia de Lisboa

Lisboa, 4-5 Dec.

Ana Paula Falcão Lecture on topographic monitoring Inst. Politécnico de Setúbal /Esc. Superior de Tecnologia do Barreiro

Barreiro, 10/Jan.

Ana Paula Falcão Lecture on remote sensing Escola Ferreira Dias

Lisboa, 22 Nov.

Fátima Farinha Dias da energia Faro (Semana Europeia da Energia Sustentável)

UALg Faro, 11-15 Apr.

Fátima Farinha O nosso futuro: Cidades e Edifícios Sustentáveis

UAlg Faro, 21 Jul.

Fátima Farinha Jornadas de Engenharia e Tecnologia – Investigação aplicada nas Universidades do Algarve e de Cádis

UAlg Faro, 22-23/ Sep.

Carlos Oliveira Cruz Seminar on PPPs Harvard University Cambridge MA, USA, April 13

II.18 Models


“Virtual Reality model of inspections and maintenance of interior walls” application developed within

PTDC/ECM/67748/2006, Sampaio, A.Z., Rosário, D.P.


__________________________________________________________________________________________

202

II.20 Pilot plants

II.21 Prototypes

II.22 Patents

II.23 Miscellaneous

Joaquim Dias is a reviewer for the “Journal of Computing in Civil Engineering”, and the “Revista Portuguesa de

Engenharia de Estruturas”

Alexandre Gonçalves: Member of the Jury of the PhD Thesis of Victor Manuel Mota Ferreira: “Planeamento

Participativo e as Tecnologias de Informação – Promover o Entendimento do Planeamento Local pelos

Cidadãos”, presented in IST/UTL, in December 2011

ICIST - Instituto de Engenharia de Estruturas, Território e Construção Group 6 –Arch.

__________________________________________________________________________________________

203

RESEARCH GROUP – ARCHITECTURE

RESEARCH GROUP CO-ORDINATOR – Prof. MANUEL DE

ARRIAGA CORREIA GUEDES


I.1 Budget

BUDGET (euros)

FCT Other Funding

STRATEGIC PROJECT

FCT

Projects

Int. R&D

Projects


Consultancy Total

14.692,76 46.113,9 0,00 0,00 27.291,5 88.098,16

I.2 Personnel

PERSONNEL




Phd researchers

Ana Cristina dos Santos Tostões

Associate Professor

X

Ana Paula Filipe Tomé Assistant

Professor X X

Helena Silva Barranha Assistant Professor

X X

João Rosa Vieira Caldas Assistant Professor

X

José Manuel Pinto Duarte Full

Professor X X

José Maria Lobo de Carvalho Guest

Assistant Professor

X X

Manuel de Arriaga Correia Guedes

Associate Professor

X X

ICIST - Instituto de Engenharia de Estruturas, Território e Construção Group 6 – Arch.

__________________________________________________________________________________________

204

Maria Alexandra Alegre Assistant Professor

X X

Maria Helena Pereira Ramalho Rua

Assistant Professor

X

Teresa Frederica Valssassina Heitor

Full Professor

X

MSc Researchers

António Barreiros Ferreira Guest

Associate Professor

X

António Rocha Feio Research Assistant

X

Bárbara Coutinho Guest

Assistant Professor

X

Francisco Teixeira Bastos Guest

Assistant Professor

X

Giles Teixeira Research Assistant

X

João Sarrazola Martins Research Assistant

X

Luís Morgado Research Assistant

X

Nuno Maria Matos Silva Guest

Assistant Professor

X

Maria Alexandre Bacharel X

Mariana Couto Brito X

Vítor M. Carvalho Araújo Guest

Assistant Professor

X


Ana Filipa Ribeiro Pedroso X

António Maria Ribeiro Góis X

João André Gonçalo Cardoso X

Jorge Miguel Carvalho Gomes X

Júlio Soares de Almeida X

Luís Filipe Baptista Machado X

Carlos Pereira da Cruz Guest

Assistant Professor

X

Frederico Moncada Fonseca Research X


__________________________________________________________________________________________

205

Assistant

Nuno Lourenço Fonseca Guest

Assistant Professor

X

Technical staff


Rosa Paula Matos

Maria José Silva

PERSONNEL - RESUME



PhD researchers 10 10


Graduate 6 3 9

Technical staff


Others

Leadership

Prof. Manuel Correia Guedes is the coordinator of this Research Group since February 2009. All the Group Ph.D.

members meet formally twice a year, in order to promote the exchange of ideas and build up effective strategies

for their research activity.


Facilities

The ISTAR-IST Architecture Research Laboratories includes two labs:

1 – Computational Architecture Laboratory, that possesses rapid prototyping, virtual reality,

remote collaborative design, 3D digitizing, and advanced geometric modelling equipment;

2 – Bioclimatic Architecture Laboratory, which includes software and monitoring equipment for

environmental analysis.

The existing facilities also include the Libraries of the DECivil and IST and two other laboratories: the

LMC (Laboratory for Computational Mechanics) and the LERM (Laboratory for Structures and

Strength of Materials). The maintenance of the Laboratories is assured by the respective technicians.


__________________________________________________________________________________________

206

The Labs are used both in research carried out by staff and graduate students (Masters’, Ph.D.), and

for teaching activities involving undergraduate students.





In progress 45 46


In progress 30 30

Publications



6 6


- -


International 9

National - -


International 36 36

National 2 2

Books

Entire - -

Chapters 21

As editor 6

Reports 4




International 5

National 1


International 15

National 9


International 1

National -


International 4

National 5


National 10



__________________________________________________________________________________________

207



Submitted 3

Awarded 1

In progress 2


Submitted 4

Awarded 1

In progress 4


National 11


National 1






8

Models 1


Pilot plants -

Prototypes -

Patents 0



__________________________________________________________________________________________

208




Overall, the main objectives set for 2010 were to increase the quality and quantity of publications of

the various members of group 6, and participation in international and national research projects.

Group 6 encompasses a variety of research topics, which are broadly divided into four main areas:

1. History and Theory of Architecture - concerned with the critical analysis of architectural theory

and practice since Renaissance, with an emphasis on the 20th century.

2. Built Environment Evaluation – a multidisciplinary area, covering subjects such as sustainable

architecture and urban design, spatial analysis or environmental rehabilitation. It focuses on

the functional performance of the built environment.

3. Architecture and computation: This field of investigation is based on the use of the ISTAR

infrastructure in architectural design, researching on modelling with digital tools.

4. Built Heritage: a research theme since the beginning of ICIST, involves studies on the

rehabilitation and conservation of the built Heritage, including areas such as archaeology,

computer analysis, building materials, etc.

Within each of these areas, group members are encouraged to develop research work in

multidisciplinary teams, in close relationship with colleagues from Engineering fields, and involving

students from the Masters’ and Ph.D. Courses. An emphasis is put on strengthening international

networking, and participating in joint international research projects.


Overall, the scientific production had a visible increase, compared to the previous year. The number

of international and national publications has increased, as well as academic cooperation and

participation in scientific committees. The number of research proposals submitted for financing has

had a slight decrease in the case of international projects, but increased for national projects.

An increase in the number of Ph.D. students is also noticeable. The recent Ph.D. course in

Architecture is creating new demands which are bringing qualitative and quantitative benefits to the

research developed in the group.

Members have also become increasingly aware of the importance of publishing in peer-reviewed

magazines – which has shown in the increase of peer-reviewed papers.


__________________________________________________________________________________________

209



The group will continue to develop research in its various subjects, reinforcing its academic

reputation. Members will keep being encouraged to participate in research projects, and to keep up

the good work carried out so far. One of the main challenges is certainly to continue to aim at

publishing in peer-reviewed magazines.


A. Ph.D. theses

A.1 Concluded


and date

Course Supervisors

(ICIST only)

Eduardo Jorge Cabral Santos Fernandes

A escolha do Porto: contributos para a actualização de uma ideia de Escola

The choice of Porto: contributions to the updating of an idea of school

U. Minho

(09.02.2011)

Architecture João Vieira Caldas

A.2 In progress

Student

Name

Thesis title University

(starting year)

Course Supervisors

(ICIST only)

João Sarrazola Martins

Estruturas de tecto e de cobertura em Portugal, do Gótico ao século XIX

Ceiling and Roof Structures in Portugal – from Gothic to XIX century

IST/UTL (2011) Architecture Supervisor: António

Sousa Gago


Caldas

Francisco Manuel Caldeira Pinto Teixeira Bastos

A comunicação de um Projecto à obra

The communication of an Architectural Design in Detailed Design Stage

IST-UTL (2009) Architecture João Vieira Caldas

Maria Isabel Whitton da Terra Soares de Albergaria

A Casa Nobre em S. Miguel no Período Moderno: modos de apropriação e representação do espaço construído

St. Miguel island’s manor houses during the Ancien Régime: ways of living and

IST-UTL (2008) Architecture João Vieira Caldas


__________________________________________________________________________________________

210

representing the space constructed

Maria Helena Esteves Diniz Barreiros

A habitação colectiva em Portugal no final do Antigo Regime

Collective housing in Portugal at the end of Ancien Régime. Lisbon’s case


(2007)


Felipa Paes de Vasconcellos

O poder transformador do espaço arquitectónico

The transforming power of the architectural space

UTL (2009) Architecture Bárbara Coutinho

Elisiário José Vital Miranda

Liberdade e ortodoxia. Equipamentos colectivos de arquitectura moderna nas colónias portuguesas, 1926-1974

Liberty and orthodoxy. Collective equipments of modern architecture in Portuguese colonies, 1926-1974

U. Minho (2007) Architecture João Vieira Caldas

António Miguel da Rocha Feio

Arquitectura Sustentável e Eco-turismo na Região do Alto Douro

Architecture, Tourism and Sustainable Development for the Douro Region

IST/UTL 2009 Architecture Manuel Correia Guedes

Luís Manuel Jorge Morgado

Habitação de madeira em Portugal – Metodologia de apoio ao projecto de arquitectura

Timber housing in Portugal. A supporting methodology for architectural design


João Gomes Ferreira (RG3)

Joana Aleixo Construção Sustentável de Baixo Custo para Angola

Low-cost sustainable Housing for Angola


Pedro Freitas Estratégias de Design Sustentável para a Baixa Pombalina

Sustainable urban design strategies for Baixa


Nuno Clímaco Reabilitação do desempenho energético de edifícios em Lisboa

Energy-efficient building refurbishment in Lisbon



__________________________________________________________________________________________

211

Vasco Portugal Design Bioclimático e Desempenho ambiental em regiões dos Trópicos

Bioclimatic Design and Environmental Performance in Tropical Regions


Mariana Abrunhosa Pereira

Reabilitação energética de edifícios residenciais em regiões de clima quente

Energy rehabilitation of domestic buildings in hot climates

Universidade do Porto (2010)

Mechanical Engineering

Manuel Correia Guedes

Sara Eloy Methodology for the integration of Information, Communication and Automation technologies (ICAT) in Housing Rehabilitation

Metodologia para a integração de TIC em reabilitação do edificado

IST/UTL

(Sep. 2005)

Architecture José P. Duarte

José N. Beirão A Computer Model for the Generation of Urban Plans

Um modelo computacional para a geração de planos urbanos

TU Delft

(Oct. 2007)

Urban Planning José P. Duarte

Gonçalo Castro Henriques

TetraScript: sistema de aberturas para controlar a luz, respondendo a condições internas e externas

TetraScript: system of openings to control the light reacting to internal and external conditions

FA/UTL

(Feb. 2008)


Nuno Castro Montenegro

Urban programs formulation model: sketch of an interactive computer tool

Formulação de programas ubanos: esquema de uma ferramenta computacional interactiva

FA/UTL

(Oct. 2008)


Sílvia Rala The life-cycle of graphic objects: the poster as a cultural resource

Ciclo de vida de objectos gráficos: o cartaz como recurso cultural

FA/UTL

(2008)

Design José P. Duarte

Vasco Granadeiro

Sustainable Customized Housing

Habitação personalizada sustentável

IST/UTL, MIT-Portugal

(Out. 2008)

Civil Engineering

José P. Duarte


__________________________________________________________________________________________

212

Jorge Gil Sustainable urban design evaluation model: design support interactive tool including spatial analysis

Modelo de avaliação de desenho urbano sustentável

TU Delft

(May 2009)

Urban Planning José P. Duarte

Maria Piedade Ferreira

Mastering the Senses: towards a corporeal architecture

Domínio dos Sentidos: para uma arquitectura corpórea

FA/UTL

(2008)


Mário Barros Mass Customized Domestic Furniture Design: application of digital design and fabrication processes to the Portuguese industry

Desenho de mobiliário doméstico personalizado: aplicação de desenho digital e processos de fabricopara a indústria portuguesa

FA/UTL

(Oct. 2009)

Design José P. Duarte

Deborah Benrós

Towards the automatic inference of shape grammars and architectural types

Para uma inferência automática de gramáticas de forma e tipos arquitectónicos

Bartlett School

(Nov. 2009)


Isa Clara Neves

The impact of new technologies on the design and production of architecture

Impacto de novas tecnologias no desenho e produção de arquitectura

FA/UTL

(Oct. 2009)


Filipe Coutinho Interpretando Da Arte Edificatória de Alberti: uma abordagem computacional ao sistema da coluna clássica

InterpretingAlberti's Da Arte Edificatoria : a computational approach to the classic column system

Universidade de Coimbra

(Jan. 2009)


Jan Halatsch Detection of urban heat island effects with the support of rule-based multi-scale city models

ETH Zurich

(2010)


Bruno Figueiredo

Descodificando Alberti's De Re Aedificatoria: uma abordagem computacional à análise e síntese de arquitectura clássica

DecodingAlberti's Da Arte Edificatoria : a computational approach to the analysis and synthesis of classic architecture

Universidade do Minho

(Oct. 2011)



__________________________________________________________________________________________

213

Carlos Tomás Mourão Soares da Costa Pereira

Sea bathing facilities: accessibility to natural aquatic space for visually impaired and blindpersons

Apoio a Banhos: A Acessibilidade ao Espaço Aquático Natural por Portadores de Deficiência Visual

IST/UTL (2008) Architecture Teresa Heitor

António da Silva Ferreira de Carvalho

Housing for elderly: from collective to assisted housing

Habitação para Idosos em Lisboa: Do Colectivo ao Assistido


Maria Alexandre Bacharel Oliveira Carreira

Active learning spaces in university context: between formality and informality

Espaços de Aprendizagem Activos em Contexto Universitário - Entre a Formalidade e Informalidade


João Rainha Mateus Duarte de Castro

Briefing as a crucial architectural design tool in Portugal

Briefing como Ferramenta Crucial na Projecto de Arquitectura em Portuga


Eduardo Miguel Duarte

The Informal Workplace in Creative Environments: Development of Morphogenetic Design Tools as an Experiential and Systematized Logic

Espaço de trablaho informal em ambientes criativos


Marion Steiger Lissabons Staderweiterungen des Estado Novo (1926-1974). Studien zum Abbild des Staates in der Stadt.

Desenvolvimento de Lisboa no Estado Novo (1926-1974). Estudo da Imagem do Poder na cidade

ETH – Zürich (Eidgenössische Technische Hochschule)

Architecture Ana Tostões

Susana Lobo Arquitectura do Turismo: redes e território. Um novo “Mapa de Portugal”

Architecture of Tourism: networks and territory: a new "map of Portugal"

Universidade de Coimbra


Ana Isabel de Arez de Magalhães

Migrações do Moderno. A arquitectura na diáspora: Angola e Moçambique - 1948-1974

Modern migration - the diaspora architecture: Angola

Universidade Lusíada



__________________________________________________________________________________________

214

and Mozambique 1948-1974

Silvia di Salvatore

A política urbanística do Estado Novo, reflexos nos processos de planeamento urbano: o caso da cidade de Alcobaça

The urban politics of Estado Novo. Impacts in urban planning. The case of Alcobaça

IST/UTL


Ricardo Carvalho

A Casa e a Rua. A Habitação Colectiva no Século XX em Portugal

The house and the street: collective housing in Portugal in the 20th century

IST/UTL Architecture Ana Tostões

Catarina Wall Gago

Contemporary interventions in late 18th to early 20th century current housing in Lisbon and Porto. Functional organization, building systems and urban character

Intervenções contemporâneas do final do século XVIII ao início do século XX na habitação em Lisboa e Porto

IST/UTL - École Polytechnique Fédérale de Lausanne


Bárbara dos Santos Coutinho

Espaços expositivos nos museus contemporâneos: Conceitos e Formas, Intervenientes, Tendências e Influências

Exhibitions spaces in contemporary museums


Tiago Farinha A unidade entre a arquitectura e a forma da cidade na obra do arquitecto Alberto José Pessoa

Unity of architecture and shape in the city on the work of Alberto José Pessoa


Joana Gouveia Alves

Permanence and persistence : Achieving sustainable Development through preservation of Twentieth century heritage

Permanência e persistência: desenvolvimento sustemtável pela preservação do património do século XX

IST/UTL - École Polytechnique Fédérale de Lausanne



__________________________________________________________________________________________

215

Cândido José Brito Reis Heleno

Edifícios de Escritórios e a Arquitectura Portuguesa dos Anos 60: Programa, tecnologia e imagem de cidade.

Office buildings and the portuguese architecture of the 60's


João Manuel Chaves de Barros Santa Rita

Estudo dos Sistemas Construtivos na Arquitectura Portuguesa nos Anos 60: do “Inquérito à Arquitectura Regional” até à Revolução de 1974

Study on the constructive systems in portuguese architecture in the 60's


Luciana da Silva Rocha

Habitação Plurifamiliar Moderna no Porto (1930-1974). Metodologias de Intervenção. Recomendações para uma salvaguarda.

Plurifamiliar housing in Porto (1930-1974)



Ana Cláudia Vespeira de Almeida

A cerâmica de autor para integração arquitectónica. A colecção do Museu Nacional do Azulejo (1949 – 1970)

The collection of ceramics of MNA

Universidade de Lisboa


Duarte Gil Ferreira Marques Nunes

Arquitecturas Regene-rativas - Estratégias para uma Intervenção Urbana Integrada

Regenerative Architectures - Strategies for an Integrated Urban Intervention

Architecture Ana Tomé


B.1 Concluded


and date

Course Supervisors

(ICIST only)

Ana Catarina Vieira Silva

School libraries: between the formal and the informal

Bibliotecas escolares: entre o formal e o informal

IST/UTL

(Nov. 2011)

Architecture Teresa Heitor/

Alexandra Alegre

João Silva Cepeda

Nadir Afonso, o Arquitecto

Nadir Afonso, the Architect

IST-UTL

(Dez. 2011)



__________________________________________________________________________________________

216

Joana Croft de Moura Drummond Dantas

Habitação minima em Portugal: uma mera questão económica ou uma filosofia de vida?

The minimal house in Portugal: an economical or philosophical matter?

IST-UTL

(Dez. 2011)


Marta Garcia Teixeira Gomes

Reconversão de palácios urbanos em Lisboa. Aplicação ao caso de estudo das unidades hoteleiras

The adaptation of Lisbon urban palaces to new uses. The hotels case study

IST-UTL

(Dez. 2011)


Ana Rita Valadas

Gonçalves

Habitação plurifamiliar ”não-pombalina”. Casos de estudo em Lisboa entre os séculos XVII e XIX

“Non-pombaline” multifamily housing. Case studies in Lisbon between the 17th and the 19th centuries

IST-UTL

(Dez. 2011)


Ana Rita Lisboa

Duarte

O sistema construtivo do piso térreo dos prédios de rendimento pombalinos

The construtive system of the ground floor of pombaline common buildings

IST-UTL

(Dez. 2011)


Miguel

Soromenho

Marques

Análise comparativo de ferramentas informáticas de simulação do desempenho da iluminação natural em edifícios

Comparative study on softwares for daylighting simulation in buildings

IST-UTL

(Dez. 2011)

Architecture Manuel Correia

Guedes

Alexandre

Gonçalves

Comunidades sustentáveis: despovoamento do território rural – estratégias de reabilitação dos espaços construídos em zonas rurais

Sustainable communities: Building rehabilitation strategies for the rural space

IST-UTL

(Out. 2011)

Architecture Manuel Correia

Guedes

Carlos Loureiro Projecto Assistido por Computador - Personalização em série da Habitação Colectiva : Abordagem Computacional ao Desenho de Edifícios

FA/UTL Architecture José P. Duarte

Ghita Akkar A Cultural, Customizable and Prefabricated Housing Scheme for Casablanca

MIT Architecture José P. Duarte

Rui Emanuel Garcia Pereira

The reinvention of mediterranean patio housing: L'and Vineyards, Alentejo a case study

A reinvenção da casa-pátio mediterrânica L'and Vineyards, Alentejo. Um caso de estudo

IST/UTL

(2011)

Architecture Teresa Heitor

Tatiana Franco Branco

Colective housing architecture: Flexibility, transformability and adptability in Alvalade housing Estates

Arquitecturas do habitar colectivo. Flexibilidade, transformabilidade e adaptabilidade no Bairro de Alvalade

IST/UTL

(2011)



__________________________________________________________________________________________

217

Maria Luísa Canas da Silva Kuhn Videira

University Atlas of Lisbon Metropolitan Area

Atlas Universitário da Área Metropolitana de Lisboa

IST/UTL

(2011)


Sara Dias Valada University libraries: in search of new publics

Bibliotecas Universitárias: à conquista dos novos utilizadores

IST/UTL

(2011)


Iria Peraboa Leite dos Santos e Roriz

Space | Body | Movement. The body as a space generator

Espaço | Corpo | Movimento. O corpo enquanto gerador de espaço

IST/UTL

(2011)


Teresa Maria de Castro e Solla Rebello de Andrade

Space and pedagogy: three models of school in Germany

Espaço e Pedagogia: Três modelos de escolas na Alemanha

IST/UTL

(2011)


Ana Luísa Figueira Pedroso

Visual analysis methodologies based on virtual reality tecnology: Cerco Garden, Mafra, Portugal

Metodologias de análise visual baseadas na tecnologia de realidade virtual: Jardim do Cerco, Mafra, Portugal

IST/UTL

(2011)


Isabel Filipa Pestana Helbling Pinho Bernardes

Contemporary working spaces: case study: architecture offices

Espaços de trabalho contemporâneo. Casos de estudo: gabinetes de arquitectura

IST/UTL

(2011)

Architecture Ana Tomé / Teresa

Heitor

Luís Pedro Freitas The role of Urban Design in urban insecurity: a proposal for Cova da Moura

Influencia do Desenho Urbano na Insegurança da Cidade. Uma proposta para o Bairro da Cova da Moura

IST/UTL

(2011)


Ana Cristina Chalaça Gil

Modelos Digitais – Geometria Associativa: a particularidade da musealização de monumentos em extensão. O Aqueduto das Águas Livres como caso de estudo

Digital Models – Associative Geometry: The peculiarity of monuments in extension. Águas Livres Aqueduct as a case study

IST/UTL

(Nov. 2011)

Architecture Helena Rua

Ricardo Abreu Figueiredo

Modelação Geográfica para Avaliação das Linhas de Torres Vedras Enquanto Sistema Defensivo

Geographic Modeling for Evaluation of the Lines of Torres Vedras Defensive System

IST/UTL

Military

Academy

(Dec. 2011)

Civil

Engineering

Alexandre Gonçalves /

Helena Rua

Catarina Carvalho Uma ideia de cidade nos anos 50. Propostas de Transformação para Lisboa

IST/UTL,

(Nov. 2011)



__________________________________________________________________________________________

218

Jessica Bonito Arquitectura moderna na África lusófona. Recepção e difusão das ideias modernas em Angola e Moçambique

IST/UTL

(Nov. 2011)


Paulo César Fernandes Fontainha

Hotel de negócios. Contributo para uma sistematização tipológica. Casos de estudo.

Business hotel. Contribution to a typological systematization. Study cases.

IST/UTL

(Nov. 2011)

Architecture Ana Tomé

B.2 In progress


(ICIST only)

Ana Catarina dos Reis Simões

A evolução dos espaços comuns e de circulação no edifício escolar

The evolution of common and circulation spaces in the school building

IST/UTL Architecture Alexandra Alegre

Catarina Telo Gonçalves

Casas reabilitadas para o Homem. Cruzamento entre a arquitectura e a sociologia na reabilitação de edifícios da transição para o séc. XX, em Lisboa

Rehabilitated dwellings: architecture and sociology in the rehabilitation of the buildings from the transition for the XX century


Maria Clara Maia O edifício escolar no desenho da cidade – o caso do Plano de Urbanização de Alvalade

School buildings in the design of the city – Alvalade Plan case


João Silva Reabilitação de edifícios abandonados para criação de redes de residências universitárias em Lisboa

Rehabilitations of vacant buildings for universities student dormitory in Lisbon


João Ferraz Arte Pública: factor de regeneração urbana?

Public Art: element for urban reabilitation?

IST/UTL Architecture Bárbara Coutinho

Ana Matos Que galeria para o século XXI?

What gallery for the XXI century?

UL/FBA Curadoria Bárbara Coutinho

Pedro Luís Dias da Silva Durand

A arquitectura nobiliária do século XVII – o caso do Palácio do Bichinho de Conta

Noble architecture of seventeenth century – the Palácio do Bichinho de

IST/UTL Architecture João Vieira Caldas


__________________________________________________________________________________________

219

Conta case

Tiago Costa Freire Ensaio sobre a relação humanística entre música e arquitectura no séc.XV

The relationship between music and architecture in the XVth century


João Luís Amado Rocha

A influência do pensamento pós-moderno na obra de Álvaro Siza Vieira

The influence of post-modern theory in Álvaro Siza Vieira’s work


Mariana Abreu Projecto sustentável em Angola

Sustainable design in Angola

IST/UTL Architecture Manuel Correia Guedes

Débora Inocêncio Arquitectura e construção sustentável em Cabo Verde: um estudo na cidade da Praia.

Sustainable Architecture in Cape Verde

IST/UTL Civil Eng. Manuel Correia Guedes

Susana Brás Arquitectura e construção sustentável em Timor-Leste.

Sustainable Architecture in East Timor

IST/UTL Civil Eng. Manuel Correia Guedes

Ana Mestre Reabilitação ambiental de centros comerciais: um estudo em Lisboa

Environmental refurbishment of shopping malls: a study in Lisbon


Cindy Marquez Thermal simulation software for the analysis of building and comfort performance: a comparative study


Rodrigo Correia Shape grammars and intelligent interfaces

Gramáticas de forma e interfaces inteligentes

IST/UTL Computer Science

José P. Duarte

Rui Van Zeller Personalização em série da Habitação para o Haiti

Mass costumizing of housing for Haiti


Eduardo Castro e Costa

Design and Manufacturing of Classical Elements according to Alberti


Leonor Vaz PInto Public space segregarion and transformation

Segregação e Transformação do Espaço Público

IST/UTL (2012)



__________________________________________________________________________________________

220

Daniel Rego Architecture as a medicinal tool

A Arquitectura como Instrumento Medicinal

IST/UTL (2012)


Katherine Both The university library network: the case of IST Alameda Campus

A Biblioteca Universitaria em Rede: O Caso do Campus da Alameda do IST

IST/UTL (2012)


José Rui Pardal Pina

Beyond the Formal: the active architectural design concept

Para Lá do Formal: O conceito de pro-actividade no projecto de arquitectura

IST/UTL (2012)


Rita Nascimento Building accessibility: the case of IST Alameda Campus

A Acessibilidade dos Edifícios - Caso De Estudo: O Campus Alameda do IST

IST/UTL (2012)


Bruno Mestre

Fernandes

Modelação Paramétrica. Sistemas de Desenho Paramétrico na Arquitectura

Parametric Modeling. Parametric Systems Design in Architecture

IST/UTL Architecture Helena Rua

Ana Filipa

Fernandes Gomes

de Sousa Roxo

Modelos Digitais. Da cidade digital à cidade aumentada.

Digital Models. From digital city to augmented city

IST/UTL Architecture Helena Rua

Ana Maymone A evolução do espaço habitacional no quadro da reabiliatação para jovens. Estudos de caso em Lisboa e Oeiras.

IST/UTL Architecture Nuno Matos Silva

Ana Margarida

Ambrósio

Para um Mapeamento de uma Leitura Sensorial dos Espaços Construídos

For a mapping of a sensory reading of the built space

IST/UTL Architecture Ana Tomé

Pedro Miguel

Serra Videira

Lages

Vazios urbanos – Para uma análise taxonómica. Casos de estudo.

Urban voids – For a taxonomic analysis. Study cases.


Ana Teresa Luís

Negrão

Impacto da luz artificial no espaço arquitectónico

Impact of artificial light in architectural space


Rita Costa

Nascimento

A condição de acessibilidade dos edifícios. Um caso de estudo: o campus Alameda do IST

The accessibility condition of buildings. A study case: the Alameda campus of IST

IST/UTL Architecture Teresa Heitor /

Ana Tomé

Johnny Aldeia Modelação arquitetónica – framework de visualização de efeitos especiais baseada na perceção sensorial

Sensory Based Framework for a

IST/UTL Informatics and Computers Engineering

Ana Tomé


__________________________________________________________________________________________

221

Visually Realistic Architectural Modelling



1. Duarte, J.P.; Beirão, J.N. (2011): "Towards a methodology for flexible urban design: designing with urban

patterns and shape grammars", Environment and Planning B: Planning and Design, V. 38, n.º 5, 2011, pp.

879-902. (IF=1.108, NC=0)

2. Eloy, S.; Duarte, J.P. (2011): "A Transformation grammar for housing rehabilitation", Nexus Network Journal,

V. 13, n.º 1, April 2011, pp. 49-71. (IF=0.060, NC=0)

3. Beirão, J.N..; Duarte, J.P.; Stouffs, R. (2011): "Creating generic grammars from specific grammars: towards

flexible urban design", Nexus Network Journal", V. 13, n.º 1, April 2011, pp. 73-111. (IF=0.060, NC=0)

4. Ferreira, M.P.; Cabral de Mello, D.; Duarte, J.P. (2011): "The grammar of movement: towards a corporeal

architecture", Nexus Network Journal, V. 13, n.º 1, April 2011, pp. 131-149. (IF=0.060, NC=0)

5. Kruger, M.; Duarte, J.P.; Coutinho, F. (2011): "Decoding De Re Aedificatoria: using grammars to trace

Alberti’s influence on Portuguese classical architecture", Nexus Network Journal, V. 13, n.º 1, April 2011, pp.

171-182. (IF=0.060, NC=0)

6. Rua, H.; Alvito, P. (2011): “Living the Past: 3D models, virtual reality and game engines as tools for

supporting archaeology and the reconstruction of cultural heritage - the case-study of the Roman villa of

Casal de Freiria“, Journal of Archaeological Science, V. 38, Elsevier, UK, Dec. 2011, pp. 3296-3308.

(IF=1.710, NC=0)




1. Caldas, J. (2011): “Design with climate in Africa. The world of galleries, brise-soleil and Beta windows”,

Docomomo Journal, n.º 44, 2011/1, pp. 16-23

2. Correia Guedes, M. (2011): “Arquitectura sustentável no Contexto Africano: o Projecto Europeu SURE-

Africa,”, Africana Studia nº 16, 1º semestre 2011, ed. CEAUP-FLUP, Porto, p.115-121, ISSN:0874-2375

3. Heitor, T. (2011): "Envolvimento educativo e participação na modernização das escolas portuguesas", TIC na

Educação, Interdidatica, May 2011, S. Paulo, Brasil.

4. Tostões, A. (2011): “Modern and Sustainable”, Docomomo Journal, n.º 44, pp. 2-3.

5. Tostões, A. (2011): “Brasilia 1960-2010: Modern Movement Universal Idea”, Docomomo Journal, n.º 43, pp.

2-3.


__________________________________________________________________________________________

222

6. Tostões, A. (2011): “Transcontinental modernism. M&G as an Unité d’habitation and a factory complex in

Mozambique”, Docomomo Journal, n.º 43, pp. 70-73.

7. Tomé, A.; Heitor, T. (2011): “Para Um Método de Análise Espaço-Uso – uma abordagem sintáctica”, Vol.12,

7th issue, PARC - Research in Architecture and Construction Journal, Department of Architecture and

Building of the School of Civil Engineering, Architecture and Urban Design of the State University of

Campinas, UNICAMP, Brazil, October, 2011, pp. 1-25.


1. Coutinho, Bárbara: “O Poder Transformador dos Objectos”, Artes da Casa, Lisboa, Instituto do Emprego e

Formação Profissional, 2011, pp.124-129.

2. Coutinho, Bárbara: “MUDE. Para uma nova forma de viver o património”, Revista Patrimónios Estudos 11,

Lisboa, IGESPAR INCM, 2011, pp.118-121.



1. Aleixo, J; Pereira, I.; Correia Guedes, M. (2011): “Low Cost Sustainable Building Solutions. Case Studies:

Angola and Guinea-Bissau”, in Proceedings of PLEA 2011 – Architecture and Sustainable Development,

Louvain-la-Neuve, Belgium, 13-15 July 2011, Presses Universitaires de Louvain, Louvain-la-Neuve, Belgium.

2. Brás, S.; Correia Guedes, M. (2011): “Low Cost Sustainable Building Solutions for East Timor”, in

Proceedings of PLEA 2011 – Architecture and Sustainable Development, Louvain-la-Neuve, Belgium, 13-15

July 2011, Presses Universitaires de Louvain, Louvain-la-Neuve, Belgium.

3. Coutinho, B.: “Expor Moda. Que desafios no espaço expositivo”, Colóquio Internacional Moda &

Comunicação: Discursos e Práticas, MUDE, Lisboa, Portugal, March 2011

4. Coutinho, B.: “Os novos espaços expositivos nos museus do século XXI. Uma experiência estética global”, 6º

CIPED – Congresso Internacional de Pesquisa em Design, Fundação Calouste Gulbenkian, Lisboa, Portugal,

Oct. 2011.

5. Gonçalves, J..; Correia Guedes, M.(2011): “Natural Lighting in Schools of Architecture: Three Case Studies”,

in Proceedings of PLEA 2011 – Architecture and Sustainable Development, Louvain-la-Neuve, Belgium, 13-

15 July 2011, Presses Universitaires de Louvain, Louvain-la-Neuve, Belgium.

6. Feio, A..; Correia Guedes, M.(2011): “Architecture, Tourism and Sustainable Development in The Douro

Region”, in Proceedings of PLEA 2011 – Architecture and Sustainable Development, Louvain-la-Neuve,

Belgium, 13-15 July 2011, Presses Universitaires de Louvain, Louvain-la-Neuve, Belgium.

7. Correia Guedes, M.; Borges, K; Baker, N. (2011): “Sustainable Architecture in Hot Regions: The SURE-Africa

project”, in Proceedings of WREC Asia-SuDBE2011 World Renewable Energy Asia Congress-Sustainable

Development in Building and Environment, Chongqing, China, 28-31 October 2011, Wren-UNESCO,

Chongqing University Press, Chongqing, China.

8. Aleixo, J; Pereira, I.; Correia Guedes, M. (2011): “Sustainable Architecture in Hot Regions: Case Studies in

Angola and Guinea-Bissau”: “Sustainable Architecture in Hot Regions: The SURE-Africa project”, in

Proceedings of WREC Asia-SuDBE2011 World Renewable Energy Asia Congress-Sustainable Development


__________________________________________________________________________________________

223

in Building and Environment, Chongqing, China, 28-31 October 2011, Wren-UNESCO, Chongqing University

Press, Chongqing, China.

9. Brás, S.; Correia Guedes, M.(2011): “Low Cost Sustainable Building in Hot Regions: a Study in East Timor””:

“Sustainable Architecture in Hot Regions: The SURE-Africa project”, in Proceedings of WREC Asia-

SuDBE2011 World Renewable Energy Asia Congress-Sustainable Development in Building and

Environment, Chongqing, China, 28-31 October 2011, Wren-UNESCO, Chongqing University Press,

Chongqing, China.

10. Castro e Costa, E.; Coutinho, F.; Duarte, J.P.; Kruger, M. (2011): "The Corinthian Capital according to Alberti:

Generative modelling and digital prototyping of classical architectural elements", Proceedings of the 5th

International Conference on Advanced Research in Virtual and Rapid Prototyping, VRAP 2011, Leiria,

Portugal, October 2011, pp. 255-262.

11. Montenegro, N.; Gomes, J.; Urbano, P. Duarte, J.P. (2011): "4CitySemantics: GIS-Semantic Tool for Urban

Intervention Areas", Proceedings of the 7th Virtual Cities and Territories Conference, 7VCT, Lisboa, Portugal,

October 11-13, 2011, pp. 549-554.

12. Montenegro, N.; Beirão, J.N.; Duarte, J.P. (2011): "Public Space Patterns: towards a towards a CIM standard

for urban public space", Proceedings of the 29th Conference on Education in Computer Aided Architectural

Design in Europe, eCAADe 2011, Ljubljana, Slovenia, September 19-20, 2011, pp. 79-86.

13. Barros, M.; Duarte, J.P.; Chaparro, B. (2011): Digital Thonet: "An automated design system for custom-made

chairs", Proceedings of the 29th Conference on Education in Computer Aided Architectural Design in Europe,

eCAADe 2011, Ljubljana, Slovenia, September 19-20, 2011, pp. 521-529.

14. Marques, L.; Duarte, J.P.; Jorge, J. (2011):" When form really follows function: Developing the prototype of a

responsive exhibition pavilion", Proceedings of the 29th Conference on Education in Computer Aided

Architectural Design in Europe, eCAADe 2011, Ljubljana, Slovenia, September 19-20, 2011, pp. 619-627.

15. Gil, J.; Almeida, J.; Duarte, J.P. (2011): "The backbone of a City Information Model (CIM): Implementing a

spatial data model for urban design", Proceedings of the 29th Conference on Education in Computer Aided

Architectural Design in Europe, eCAADe 2011, Ljubljana, Slovenia, September 19-20, 2011, pp. 143-151.

16. Coutinho, F.; Castro e Costa, E.; Duarte, J.P.; Kruger, M. (2011): "A computational interpretation of De Re

Aedificatoria: translating Alberti’s column system into a shape grammar", Proceedings of the 29th Conference

on Education in Computer Aided Architectural Design in Europe, eCAADe 2011, Ljubljana, Slovenia,

September 19-20, 2011, pp. 788-798.

17. Celani, G.; Duarte, J.P.; Beirão, J.N.; Vaz, C.E. (2011): "Optimizing the “characteristic structure”: Combining

shape grammars and genetic algorithms to generate urban patters", Proceedings of the 29th Conference on

Education in Computer Aided Architectural Design in Europe, eCAADe 2011, Ljubljana, Slovenia, September

19-20, 2011, pp. 491-500.

18. Granadeiro, V.; Duarte, J.P.; Palensky, P. (2011): "Building envelope shape design using a shape grammar-

based parametric design system integrating energy simulation", Proceedings of the IEEE Africon 2011 on

Sustainable Energy & Communications Development for Africa, Livingstone, Zambia, September 13-15.

19. Barros, M.; Duarte, J.P.; Chaparro, B. (2011): "Thonet chair design grammar: a step towards the mass

customization of furniture", Proceedings of the CAAD Futures Conference, Liege, Belgium, July 4-8, 2011, pp.

181-200.


__________________________________________________________________________________________

224

20. Benros, D.; Granadeiro, V.; Duarte, J.P. Knight, T. (2011): "Automated design and delivery of relief housing:

the case of post-earthquake Haiti", Proceedings of the CAAD Futures Conference, Liege, Belgium, July 4-8,

2011, pp. 247-263.

21. Montenegro, N.; Beirão, J.; Duarte, J.P. (2011): "Public Space Patterns: Modelling the language of urban

space", Proceedings of the 13th International Conference on Advances in Design Sciences and Technology,

EuropIA.13, Rome, Italy, June 8-10, 2011.

22. Granadeiro, V.; Sass, L.; Duarte, J.P. (2011):" Digitally Fabricated Building System for Customized Housing:

the case of post-earthquake Haiti", Proceedings of the Sustainable Intelligent Manufacturing, SIM 2011,

Leiria, Portugal, June 29-30, pp. 639-647.

23. Barros, M.; Duarte, J.P.; Chaparro, B. (2011): "A design system for the mass customization of Thonet chairs",

Proceedings of the Sustainable Intelligent Manufacturing, SIM 2011, Leiria, Portugal, June 29-30, pp. 737-

745.

24. Montenegro, N.; Gomes, J.; Urbano, P. Duarte, J.P. (2011): "An OWL2 Land Use Ontology: LBCS" in Lecture

Notes in Computer Science (LNCS), Proceedings of the 11th International Conference on Computational

Science and Its Applications, ICCSA 2011, University of Cantabria, Santander, Spain, June 20-23, 2011, pp.

185-197. Springer.

25. Vaz, C.E.; Celani, G.; Duarte, J.P. (2011): "An ontology representing Roberto Burle Marx's landscape design

solutions" in Herr, C.M.; Gu, N.; Roudavski, S.; Schnabel, M.A. (eds.) Proceedings of the 16th International

Conference of the Computer-Aided Architectural Design Research in Asia, CAADRIA 2011, Newcastle,

Australia, April 27-30, 2011, pp. 389-398.

26. Celani, C.; Duarte, J.P.; Vaz, C.E. (2011): "The Gardens revisited: the [lost] link between meaning and logic"

in Herr, C.M.; Gu, N.; Roudavski, S.; Schnabel, M.A. (eds.) Proceedings of the 16th International Conference

of the Computer-Aided Architectural Design Research in Asia, CAADRIA 2011, Newcastle, Australia, April 27-

30, 2011, pp. 643-652.

27. Duarte, J.; Kruger, M.; Coutinho, F.; Figueiredo, B.; Castro e Costa, E. (2011): “Alberti Digital: Tradição e

inovação na teoria e prática da arquitectura em Portugal”, 2º Colóquio Internacional “Gêneses das

Racionalidades Modernas – em torno de Alberti”, Belo Horizonte, Brasil, April 5-8, 2011.

28. Heitor, T. (2011): "Portugal: From repeated designs to modern individualised design solutions", OECD Centre

for Effective Learning Environments (CELE) International web conference seminar series, 30 March 2011

29. Heitor, T., Nogueira, A., Carreira,, M.Bacharel, Rodrigues, G., Pedroso, A.L. (2011) Virtual Heritage:

Simulations and Visualization Tools, CAA 2011 "Revive the Past", April 12-16, 2011

30. Pereira, C M, Heitor, T V, (2011): "Architecture with and without Sight. Sea bathing facilities as case study".

6th International Conference on Inclusive Design. London, UK, 18th - 20th April 2011. London: Royal College

of Art.

31. Nogueira, A., Heitor, T., Carreira,, M.Bacharel, Rodrigues, G., Pedroso, A.L. (2011): "Metodologia de análise

visual baseada na tecnologia de Realidade Virtual (V.R.): Jardim Botânico do Rio de Janeiro, Brasil e Jardim

do Cerco, Mafra, Portugal ", II Congreso Iberoamericano y X Jornada: "Técnicas de Restauración y

Conservación del Patrimonio", 14-16 September 2011, La Plata, Argentina.


__________________________________________________________________________________________

225

32. Morgado, L. (2011): "A oferta da habitação em madeira em Portugal. A procura de uma alternativa no âmbito

da arquitectura", 1º Congresso Ibero-latino-americano da madeira na construção (CIMAD11), Coimbra, 7-9

June 2011, pp. 163-164

33. Morgado, L: "A arquitectura moderna e a habitação em madeira: uma perspectiva histórica até à primeira

metade do século XX", Livro de Resumos do 1º Congresso Ibero-latino-americano da madeira na construção

(CIMAD11), Coimbra, 7-9 de Junho de 2011, pp. 345-346.

34. Rua, H.; Alvito, P.; Ramos, D.; Fernandes, B.; Martins, S. (2011): “Modelling as Communication. The use of

3D models for developing architectural ideas”, eCAADe 29th Procedings: Respecting Fragile Places”,

University of Ljubljana, Faculty of Architecture, Slovenia, 1st Edition Sptember 2011. ISBN 978-9-4912070-1-

3, pp. 881-889.

35. Tostões, A. (2011): “Modern and Sustainable: a resource”, in Monteros, F. E. de los; León, J. M. H. (eds.),

Criterios de intervención en el patrimonio arquitectónico del siglo XX, International Conference CAH20thC,

Documento de Madrid 2011, Madrid, Junho 2011, pp. 201-206.

36. Tostões, A.; Oliveira, M.M. (2011): “Moderno Transcontinental: O complexo Monteiro & Giro em Quelimane,

Moçambique”, in Interdisciplinaridade e experiências em documentação e preservação do património

recente, 9º Seminário Docomomo Brasil, Brasília, pp. 1-24.


1. Correia Guedes, M; (2011) “Arquitectura sustentável em Países Africanos de Expressão Lusófona: o Projecto

Europeu SURE-Africa,”, in Cadernos de Arquitectura, Universidade Lusófona, Abril 2011, ed. Univ.

Lusófona, Lisboa

2. Garcia Pereira, R.; Heitor, T.; Raposo, R. (2011): "Gated Communities: Form and context The experience in

Cascais Municipality" - Morfologia Urbana em Portugal: Abordagens e Perspectivas, FLUP - Porto, 8 June.


A.1 Entire books

A.2 Chapters

1. Caldas, J.: “Pequeno ensaio sobre as igrejas de três naves do Nordeste”. In: “Inventário do Património

Imóvel dos Açores. São Miguel. Nordeste”, DRC/IAC/CMN, Angra do Heroísmo, 2011, pp. 25-36, ISBN 978-

972-647-263-6, 978-989-822-5-22-1, 978-972-98449-8-0

2. Correia Guedes, M; Lopes, L.; “Projecto Bioclimático: Princípios Gerais”, in Arquitectura Sustentável em

Cabo Verde: Manual de Boas-Práticas, Correia Guedes, M; Lopes, L. (eds.), ed. CPLP, 184pp, February

2011 (ISBN 978-989-97178-2-4)

3. Correia Guedes, M; Aleixo, J.; “Projecto Bioclimático: Princípios Gerais” in Arquitectura Sustentável em

Angola: Manual de Boas-Práticas, Correia Guedes, M; Aleixo, J. (eds.), ed. CPLP, 176pp, February 2011

(ISBN 978-989-97178-3-1)

4. Correia Guedes, M; Pereira, I.; “Projecto Bioclimático: Princípios Gerais” in Arquitectura Sustentável na

Guiné-Bissau: Manual de Boas-Práticas, Correia Guedes, M; Pereira, I.(eds.), ed. CPLP, 214pp, February

2011 (ISBN 978-989-97178-0-0)


__________________________________________________________________________________________

226

5. Correia Guedes, M; Forjaz, J.; “Projecto Bioclimático: Princípios Gerais”, in Arquitectura Sustentável em

Moçambique: Manual de Boas-Práticas, Correia Guedes, M; Forjaz, J (eds.), ed. CPLP, 184pp, February

2011 (ISBN 978-989-97178-1-7)

6. Duarte, J.P.; Celani, G.; Pupo, R.: "Inserting computational technologies in architectural curricula" in Gu, Ning

and Wang, Xiangyu (ed.) Computational Design Methods and Technologies: Applications in CAD, CAM and

CAE Education. Hershey, PA, U.S.A: IGI Global Publishing.

7. Heitor, T. (2011) School building rehabilitation: thinking strategically towards excellence in OECD (2011)

Designing for Education Compendium of Exemplary Educational Facilities 2011, Chapter 4 pp.34-39.

8. Heitor, T. (2011): "(Re)Making School Heritage" in Mestre, V. and Aleixo, V.: Heritage: Between Time and

Movement chapter 1 pp10-13, Uzina Books, Lisbon.

9. Tostões, A.; Costa, X. (2011), Mediterranean Cities, Coup de Dés, Barcelona, Basel, New York, Actar-

Birkhäuser.

10. Tostões, A. (2011), “Lugar, Memória e Criação. Arquitectura da 2ª metade do século XX” in Serrão, V.;

Caldas, J. V.; Sardo, D.; (eds.), História de Arte nos Açores, Angra do Heroísmo, Direcção Regional da

Cultura (no prelo).

11. Tostões, A. (2011), “Equipamientos y modernidad. La afirmación de la arquitectura moderna en Portugal”, in

Equipamientos II, Cultura, ócio, turismo y transporte. Registro Docomomo Ibérico 1925-1965, Madrid,

Fondacion Caja de Arquitectura, (co-autoria: Costa, S.V.), pp. 21-27.

12. Tostões, A. (2011), “Cine-teatro Capitólio”; “Edificio Garagem do Comércio do Porto”; “Hotel Victória”;

“Estación marítima de Alcántara y Rocha Conde de Óbidos”; “Edifico de Correos”; “Mercado de Arroios”;

“Piscina de Espinho”; “Edificio IBM (DKW)”; “Club de Tenis de Monsanto”; “Hotel Turismo Abrantes”; “Feria

de las Industrias de Lisboa”; “Estación de metro Parque”; “Hospedería de Picote”; “Plaza de toros Celestino

Graça”; “Hotel-Barrio Alemán”; “Museo Monográfico de Conímbriga”; “Piscina del Campo Grande”;

“Fondation Calouste Gulbenkian”; “Hotel de Porto Santo”; “Hospedería de Serreta”; “Estación de Autobuses

de Beja”, in Equipamientos II, Cultura, ócio, turismo y transporte. Registro Docomomo Ibérico 1925-1965,

Madrid, Fondacion Caja de Arquitectura, (co-autoria: Costa, S.V.), pp. 298-300, 303-305, 309, 314, 317, 319-

320, 329, 333-336, 338, 341, 345-347, 352-355.

13. Coutinho, B.: “Breves Notas para uma História da Moda em Portugal”, prefácio a Valter Carlos Cardim, A

Moda em Portugal. 1807-1914, Lisboa, IADE Edições, 2011, pp.5-8. ., ISBN 978-989-8473-01-1

14. Coutinho, B.: “Prefácio”, Triennale Européenne du Bijou Contemporain, Mons, European Triennial for

Contemporary Jewellery, 2011, pp. 104-108., ISBN 978-2-87536-008-3

15. Coutinho, B.: “Kukas. Escultura, Matéria e Movimento”, Kukas. Uma nuvem que desaba em chuva, Lisboa,

CML/MUDE e Imprensa Nacional/ Casa da Moeda, 2011, pp.8-15.ISBN 978-972-27-2012-0

16. Coutinho, B.: Único e Múltiplo. 2 Séculos de Design, Lisboa, CML/MUDE, 2011. ISBN 987-989-96210-8-4

17. Coutinho, B.: “Victor Palla. Para além dos limites formais do papel / pushing the limits of paper”, prefácio de

Victor Palla, Colecção D, Lisboa, INCM, 2011, pp.3-9.ISBN 978-972-27-1970-4

18. Coutinho, B.: “Instant City / Lisboa 2010 NATO”, 3 weeks/24 hours. Cimeira da Nato em Lisboa. Lisbon Nato

Summit, Ratingen, CAPA edition, 2011, pp.13-29, ISBN 978-3-9814622-0-3

19. Coutinho, B.: “A Modernidade enquanto Atitude. MNAA no MUDE”, M&M, Lisboa, INCM, 2011.


__________________________________________________________________________________________

227

20. Coutinho, B.: “A cidade enquanto paisagem criativa”, A Rua é Nossa...de Todos Nós, Lisboa, CML-MUDE,

2011, pp 9-13.

21. Coutinho, B.: “João Brites. Em Demanda da Obra de Arte Total”e “In search of the total work of art”, Do Outro

Lado/ On the other side, Catálogo da Representação Portuguesa na Quadrienal de Praga. Espaço e design

da performance, Ministério da Cultura/ Dgartes, 2011, pp. 83-96 e 79-92., ISBN 978-989-95604-8-2

A.3 As editor

1. Correia Guedes, M.; Lopes, L. (eds.); AAVV, Arquitectura Sustentável em Cabo Verde: Manual de Boas-

Práticas, ed. CPLP, 184pp, February 2011 (ISBN 978-989-97178-2-4)

2. Correia Guedes, M.; Aleixo, J (eds.), AAVV.; Arquitectura Sustentável em Angola: Manual de Boas-Práticas,

ed. CPLP, 176pp, February 2011 (ISBN 978-989-97178-3-1)

3. Correia Guedes, M.; Pereira, I. (eds.); AAVV, Arquitectura Sustentável na Guiné-Bissau: Manual de Boas-

Práticas, ed. CPLP, 214pp, February 2011 (ISBN 978-989-97178-0-0)

4. Correia Guedes, M.; Forjaz, J (eds.).; Arquitectura Sustentável em Moçambique: Manual de Boas-Práticas,

ed. CPLP, 184pp, February 2011 (ISBN 978-989-97178-1-7)

5. Heitor, T. (2011) Parque Escolar 2007-2011: 106 Interventions, Parque Escolar/Argumentum, Lisboa, 2011

6. Tostões, A. (2011), “Tel Aviv, The Modern Mediterranean City”, in Tostões, A.; Costa, X. (eds.),

Mediterranean Cities, Coup de Dés, Barcelona, Basel, New York, Actar-Birkhäuser, pp. 7-19.


1. Correia Guedes, M.: “Acção Pontual CPLP: Publicação de Manuais SURE-Africa - Relatório de actividades”,

Lisboa, March 2011.

2. Correia Guedes, M.; Calixto, L.: “Estudo de desempenho de iluminação natural no interior de edifício de

habitação”, relatório pericial relativo ao processo civil 1008/10.3TBCBR, May 2011

3. Feio, A.; Correia Guedes, M.: “Sustainable Tourism in the Douro Region”, report to CCDRN; Dec. 2011

4. Duarte, J.P.: “City Induction: formulação, geração e avaliação de planos: Relatório Final de Projecto, ICIST,

Lisboa, Oct. 2011.

5. Silva, Nuno M.,: “2º Caderno de Levantamento de Elementos Construtivos nos arredores do IST, Campus da

Alameda, Sebenta, Secção de Folhas, IST, Oct. 2011


1. Lourenço, N.; Cruz, C.; Moncada, F.: “Estudo Urbanístico de Estrutura da Área Envolvente à Terceira

Travessia do Tejo em Lisboa”, Relatório ICIST EP n.º 23/2011, Lisboa, Nov. de 2011.

2. Feio, A.; Correia Guedes, M.: “Sustainable Tourism in the Douro Region”, protocol with CCDRN; 2009-2011


__________________________________________________________________________________________

228




Correia Guedes, M. Renewable Energy, Elsevier

José P. Duarte UDI, Urban Design International, Palgrave Macmillan Journals, Houndmills, Basingstoke, Hampshire, UK

José P. Duarte Arquitetura Revista, Revista Semestral, UNISINOS - Universidade do Vale do Rio dos Sinos

José P. Duarte PARC, Pesquisa em Arquitetura e Construção, Revista Semestral, Departamento de Arquitetura e Construção da Faculdade de Engenharia Civil, Arquitetura e Urbanismo da UNICAMP

Ana Tostões Docomomo Journal



José P. Duarte Artitextos, Ar - Cadernos de Arquitectura da FAUTL e Ur - Cadernos de Urbanismo da FAUTL, Membro da Equipa de Revisão Paritária (Referee) das publicações do CECFA - Centro Editorial e de Comunicação da Faculdade de Arquitectura da UTL




M. Correia Guedes University of Chongqing, Faculty of Built Environment,China

Guest Scientific Committee Member,

M. Correia Guedes WREN-Asia SuDBE 2011, 5th World Renewable Energy Asia Congress-Sustainable Development in Building and Environment, Chongqing, China, 28-31 October 2011, Wren-UNESCO,

Scientific Committee Member, Referring committee member, Chair

M. Correia Guedes Experts’ panel for the evaluation of the EU projects’ call FP7-I2012-NMP-ENV-ENERGY-ICT-EeB, Dec. 2011-January 2012

Member of the evaluators’ panel

José P. Duarte DCC 2012, 3nd International Conference on Design Computing and Cognition, Texas A&M University, College Station, Texas. 8-10 June 2012.

Vice-chair, Program Committee Member.

José P. Duarte 7VCT, 7th Virtual Cities and Territories 2011, Nova University of Lisbon, Lisbon. October 11-13.

Scientific Committee Member.

José P. Duarte ACADIA 2011, International Conference of the Association for

Peer-reviewing Committee Member.


__________________________________________________________________________________________

229

Computer-Aided Design in Architecture, The Cooper Union, New York City, New York, Canada,

José P. Duarte SIM 2011, International Conference on Sustainable Intelligent Manufacturing, Centre for Rapid and Sustainable Product Development (www.cdr-sp.ipleiria.pt), Polytechnic Institute of Leiria, Portugal, June 29-July 1, 2011.


José P. Duarte CAADRIA 2011, 16th International Conference of the Association for Computer-Aided Architectural Design Research in Asia, Newcastle on Circuit Bending, Breaking and Mending, Australia, April 27-29, 2011.


Teresa Heitor 8th Space Syntax International Synposium

Referring committee

Teresa Heitor OECD- Centre for effective Learning Environments (CELE) Group of National Experts on Evaluation of Education Facilites (GNEEFE)

Chair

Ana Tostões THICOM, Tugendhat International Scientific Committee.

Scientific Committee Member

Ana Tostões New Gourna - Hassan Fathy Scientific ; World Heritage, UNESCO


Ana Tostões DOCOMOMO International: International committee for Documentation and Conservation of buildings, sites and neighbourhoods of the Modern Movement.

President

Ana Tostões 12th DOCOMOMO International Conference, Helsinki, August, 2012.


Ana Tostões ICOMOS International Scientific Committee for the 20th Century Heritage





M. Correia Guedes. Sociedade de Geografia de Lisboa Scientific Council Member

(Emmigration Commission)

M. Correia Guedes Conselho consultivo para a area do Ambiente Construido, e Juri para atribuição do Selo Verde, Câmara Municipal do Seixal

Evaluator, Committee member

M. Correia Guedes. Evaluation of PhD candidacies for the Foundation for Science and Technology.

Referring Commitee


__________________________________________________________________________________________

230

M. Correia Guedes Evaluation of Soares da Costa student prize (Sustainable design)

Evaluator, Committee member

M. Correia Guedes Evaluation of QREN candidacies Referring Commitee

Teresa Heitor Symposium A RUA É NOSSA MUDE 13 - 18 Feb 201

Referring committee

Helena Rua Grupo de Trabalho Permanente “Sistemas de Informação Geográfica”, para a área temática de Arqueologia, criado pela APDSI - sedeada na Universidade Nova de Lisboa, desde Junho de 2008.

Member of the working Group

Ana Tostões IV Congresso de História da Arte Portuguesa, Lisboa, Fundação Calouste Gulbenkian, Nov. 2012.


Ana Tostões Comissão Instaladora do Núcleo Pombalino, Câmara Municipal de Lisboa.





Teresa Heitor Group of National Experts on Evaluation of Education Facilites (GNEEFE)

OECD- Centre for effective Learning Environments (CELE)





Event Notes

M. Correia Guedes WREN-Asia SuDBE 2011, 5th World Renewable Energy Asia Congress-Sustainable Development in Building and Environment, Chongqing, China, 28-31 October 2011, Wren-UNESCO

Bárbara Coutinho Colóquio Internacional Moda & Comunicação: Discursos e Práticas (March)

Scientific comittee member

Bárbara Coutinho 6º CIPED – Congresso Internacional de Pesquisa em Design (Oct.)

Bárbara Coutinho 15º MUSCON – European Museum Network Conference, Lisboa/MUDE, Portugal (Oct.)

Organiser with Vitra Design Museum


__________________________________________________________________________________________

231

José P. Duarte Workshop on Housing Grammars: new technologies for Housing Design, Alfero Computation Laboratory, Campus Lo Contador, Universidad Católica de Chile, Chile. July 22-27, 2011. Co-Chair (com Arturo Lyon Gottlieb, Rodrigo García Alvarado). Financed by Fondecyt 1100374.

Teresa Heitor 8th Space Syntax International Synposium

Ana Tostões Materials Inside Ouside, Thicom International Conference - Faculty of Architecture, Brno, Czech Rep.,1st July

Chair

A.2 National events


Event Notes

Teresa Heitor Simposyum A RUA É NOSSA - EUROPAN, MUDE, Feb 2011

Nuno Matos Silva Study visit to Porto and Santiago de Compostela June 2011

Nuno Matos Silva Study visit to Évora Dec. 2011

Ana Tostões IST-EPFL Joint Doctoral Initiative ENLIGHTENMENT AND NEW OBJECTIVITY. From Ernst May’s Das Neue Frankfurt to Lisbon’s Plan, Instituto Superior Técnico, 14 de Março

Keynote speaker and organizer

Ana Tostões TRANSITIONS. Monumentalidade, ditadura e democracia, VII Waterfronts of Art International Conference - TRANSITIONS, Auditório Complexo Interdisciplinar, IST, Lisboa, 6 de Outubro

Keynote speaker




Date

João Vieira Caldas Congresso Internacional: Casa Nobre, um património para o futuro

Arcos de Valdevez, Portugal

2-4 Dec. 2011

Correia Guedes, M. WREN-Asia SuDBE 2011, 5th World Renewable Energy Asia Congress-Sustainable Development in Building and Environment, Chongqing, China, 28-31 October 2011, Wren-UNESCO,

Chongqing, China

28-31 October 2011

Correia Guedes, M. Seminar on Sustainable Building, Macau, University of S. José

Macau, China 4th Nov. 2011

Correia Guedes, M. PLEA 2011 International Conference on Passive and Low-Energy Architecture

Leuven, Belgium

13-15 July 2011

Correia Guedes, M. Ciclo de Workshops – Cluster Tecnologias Tropicais, AITEC-Oeiras

Oeiras, Portugal

22 Nov.


__________________________________________________________________________________________

232

José P. Duarte 5th International Conference on Advanced Research in Virtual and Rapid Prototyping, VRAP 2011.

Leiria, Portugal

October 2011

José P. Duarte 7th Virtual Cities and Territories Conference, 7VCT.

Lisboa, Portugal,

October 11-13, 2011

José P. Duarte 29th Conference on Education in Computer Aided Architectural Design in Europe, eCAADe 2011.

Ljubljana, Slovenia

September 19-20, 2011

José P. Duarte IEEE Africon 2011 on Sustainable Energy & Communications Development for Africa.

Livingstone, Zambia

September 13-15

José P. Duarte CAAD Futures Conference. Liege, Belgium July 4-8, 2011

José P. Duarte 13th International Conference on Advances in Design Sciences and Technology, EuropIA.13.

Rome, Italy June 8-10, 2011

José P. Duarte Sustainable Intelligenrt Manufacturing, SIM 2011.

Leiria, Portugal

June 29-30

José P. Duarte 11th International Conference on Computational Science and Its Applications, ICCSA 2011.

Santander, Spain

June 20-23, 2011

José P. Duarte 16th International Conference of the Computer-Aided Architectural Design Research in Asia, CAADRIA 2011

Newcastle, Australia

April 27-30, 2011

José P. Duarte 2º Colóquio Internacional “Gêneses das Racionalidades Modernas – em torno de Alberti”

Belo Horizonte, Brazil

April 5-8, 2011

Teresa Heitor CAA 2011 "Revive the Past" Beijing, China April 12-16, 2011

Teresa Heitor 6th International Conference on Inclusive Design. Royal College of Art

London, UK April 18-20 2011

Teresa Heitor 2do. Congreso Iberoamericano y X Jornada: "Técnicas de Restauración y Conservación del Patrimonio"

La Plata, Argentina

Sept. 14-16 2011

Teresa Heitor Designing for Education: Compendium of Exemplary Educational Facilities 2011" - OECD

Paris, France Sept. 29 2011

Helena Rua 29th eCAADe2011 – Respecting Fragile Places

Ljubljana, Slovenia

Sept. 21-24 2011

Ana Tostões Moderno Transcontinental: O complexo monteiro & giro em quelimane, moçambique

9th Docomomo Brazil Seminar

Faculdade de Arquitectura e Urbanismo, Universidade de Brasília

Brasília, Brazil June 9

Ana Tostões Brasília e a Monumentalidade Moderna. 9th Docomomo Brazil Seminar - Faculdade de Arquitectura e Urbanismo, Universidade de Brasília (speaker)

Brasília, Brazil June 10


__________________________________________________________________________________________

233

Ana Tostões Une oeuvre PLANEtaire - L’oeuvre architecturale de Le Corbusier: une contribution exceptionnelle au Mouvement Moderne - Journée d’Études sur le projet d’inscription sur la liste du patrimoine mondiale, Institut National du Patrimoine (speaker)

Paris, France Jan. 14

A.2 National Events


M. Correia Guedes Arquitectura e Desenvolvimento Sustentável, cycle of conferences, Universidade Lusófona

Lisbon April 2011

M. Correia Guedes Atribuição do Selo Verde, Câmara Municipal do Seixal

Lisbon Nov. 2011

Teresa Heitor Simposyum A Rua é Nossa Lisbon Feb. 13-18, 2011

Teresa Heitor Morfologia Urbana em Portugal: Abordagens e Perspectivas

Porto June 8, 2011

Helena Rua Seminário de Termografia, MRA Instrumentação para a Medição e Análise, TagusPark

Oeiras June 27, 2011

Helena Rua Workshop on Publishing your Research, ADVANCE – Centro de Investigação Avançada em Gestão do ISEG

Lisbon June 30 2011

Helena Rua 1st Symposium FabLab – Digital Fabrication. A State of Art, ISCTE-IUL

Lisbon Sept. 9-10, 2011

Nuno Matos Silva 23º Encontro Nacional da Associação de Professores de Expressão e Comunicação Visual

Bragança May 2011

Ana Tomé Workshop on Publishing your Research, ADVANCE – Centro de Investigação Avançada em Gestão do ISEG

Lisbon 30 June, 2011

Ana Tomé 1st Symposium FabLab – Digital Fabrication. A State of the Art, ISCTE-IUL

Lisbon Sept. 9-10, 2011



Date

Helena Rua El Valor de la Obra Pública: La Antiguedad y su Proyección, Summex 2011, Universidad de Extremadura,

Mérida, Spain July 14-15, 2011

Helena Rua VIA Conference – Visualisation in Archaeology. VIA 2011: Engaging with the Virtual World, University of Southampton.

Southampton UK

April 18-19, 2011


__________________________________________________________________________________________

234



Correia Guedes, M.; Desenvolvimento de Acções Pontuais em Timor-Leste e S. Tomé e Príncipe; submitted to

CPLP in Feb. 2011

Correia Guedes, AAVV; proposal for the U.E. FP7-2012-NMP-ENV-ENERGY-ICT-EeB call (SICA-UNESCO),

Dec. 2011

Silva. M.: Virtual Technology for Buildings - FP7-2011-1234-5678 (submitted April 2011l)


Correia Guedes, M.; CPLP: Desenvolvimento de Acções Pontuais em Timor-Leste e S. Tomé e Príncipe; July

2011


Correia Guedes, M.; CPLP: Projecto SURE-Africa, fase 2, Desenvolvimento de Acções Pontuais em Timor Leste

e S. Tomé e Príncipe.

Duarte, J.P. ModelSim: Modelagem e Simulação em Arquitectura e Urbanismo - Sistemas Generativos e

Avaliação de Desempenho (FCT/CAPES)


Correia Guedes, M.; Portugal, V. Projecto ReAB (Submitted March)

Duarte, J.P. - Cerâmica Personalizada: um modelo para a personalização de produtos de cerâmica utilitária

(FCT) (Submitted January)

Duarte, J.P. - Modelação computacional e física de estruturas tensionadas (FCT) (Submitted January)

(Coordinator: Vitor Leitão).

Duarte, J.P. - Solar Roads (Câmara Municipal de Óbidos) (Submitted June 11)


Duarte, J.P. – NAADIR: A New Approach to Architectural Drawing Including Computational Descriptions (FCT)

(Submitted January)


Caldas, João Vieira; EWV – Exchanging worlds visions: modern architecture in Lusophone Africa (1943-1974)

looking through Brazilian experience established since the 1930s. (PI: Ana Tostões).

Feio, A.; Correia Guedes, M.; “Sustainable Tourism in the Douro Region”, grant attributed by CCDRN (Protocol)


__________________________________________________________________________________________

235

Duarte, J.P. - City induction: um modelo para formular, avaliar e gerar planos urbanos (FCT,

PTDC/AUR/64384/2006).

Duarte, J.P. - Digital Alberti: tradition and innovation in architectural practice and theory in Portugal (FCT,

PTDC/AUR-AQI/108274/2008). Coordinator: Mário Kruger.




Organization Date

Correia Guedes, M. Guest Member of the Scientific committee University of Chongqing, FBE, China

Oct2011-present

Correia Guedes, M. Joint Supervision of PhD thesis University of Chongqing, FBE, China

Oct2011-present

Correia Guedes, M. Adviser, Scientific Committee,

SURE-Africa project, phase 2

University of S.José, Macau, China

Oct.2011-Present

Correia Guedes, M. SURE-Africa Project, phase 2 Government of S. Tomé e Príncipe

Sept.2011-present

Correia Guedes, M. Joint Supervision, 2 PhD. Students MIT, USA Sept. 2010-present

Correia Guedes, M. Joint Supervision, 1 PhD. Student Univ. Agostinho Neto, Angola

Sept. 2010-present

Correia Guedes, M. Research Project Proposal UPC Cataluna, Spain, and U. Brasília, Brazil

March 2011

Correia Guedes, M. Research Project Proposal IUAV Venice, Univ. Reading UK, UNESCO

Nov. 2011

Bárbara Coutinho Europeana database of Fashion Europeana CIP-ICT-PSP- 2011-5

José P. Duarte Lecture and Participation in PhD Projects Proposals, Doctoral Program, Concepción, Chile. July 19, 2011.

Universidad de Bío-Bío, Chile

Jul. 11

José P. Duarte Workshop, Alfero Computation Laboratory. July 22-27, 2011.

Campus Lo Contador, Universidad Católica de Chile, Chile

Jul. 11

Vasco Granadeiro Ph.D. Student, MIT-Portugal Program, IST UTL.

Austrian Institute of Technology, Austria

Sep. 11 – Feb. 12

José P. Duarte Research Project “ModelSim: Modelagem e Simulação em Arquitectura e Urbanismo

Universidade Federal de Rio

2011


__________________________________________________________________________________________

236

- Sistemas Generativos e Avaliação de Desempenho”

Grande do Sul, Brazil

José P. Duarte Research Project Proposal “Customized Ceramics”

MIT, USA Apr. 2011

Teresa Heitor Consultancy on school building evaluations methods and techniques: literature review, cross sample studies

OECD CELE - Centre for Effective Learning Environments

along the year

Ana Tostões Rice University School of Architecture: External Reviewer das provas do Prof. Farès-el-Dahdah para o cargo de Full Professor

Rice University School of Architecture

July 2011

Ana Tostões The University of Texas at Austin School of Architecture: External Reviewer das provas do Prof. Fernando Lara para o cargo de Associate Professor

The University of Texas at Austin, USA

September 2011

Ana Tostões Grants PhD Program IST-EPFL IST-EPFL Nov. 2011



Organization Date

Alexandra Alegre Projecto SELO ACESSO (ICIST, Projecto n.º 40NCML3900, 2011)

Fundação LIGA / Centro Português do Design

2011

João Vieira Caldas Inventário do Património Imóvel dos Açores (Azores Built Heritage Inventory)

Instituto Açoriano de Cultura

2011

M. Correia Guedes Joint PhD Supervision LNEC 2011

M. Correia Guedes Joint PhD Supervision FAUTL 2011

M. Correia Guedes PhD Supervision CCDRN 2011

José P. Duarte Projecto de Investigação “Digital Alberti” Universidade de Coimbra

2011

José P. Duarte Research Project Proposal “Customized Ceramics”

FA, ISEG, IDEM, INESC-ID

Apr. 2011

José P. Duarte Research Project Proposal “Estruturas Multilaminares para Habitação”

ESLAM, FA, ISEG, IDEM

Sep. 2011

Helena Rua Projecto: “Análise Histórica e Território. Contributo para o estudo da defesa de Lisboa – as Guerras Peninsulares”.

Junta Distrital de Lisboa

2007-Present

Helena Rua Realidade virtual e aumentada aplicada a cerâmicas romanas – automatização da determinação de tipos e catalogação de espólio, de levantamento (scanner) e de tratamento de dados

Museu Nacional de Arqueologia

(sítio de Torre de Palma)

2009 - Present

Helena Rua “Reconstituição Histórica das Origens e dos Sistemas de Distribuição de Água à

EPAL 2010 - Present


__________________________________________________________________________________________

237

Cidade de Lisboa – do período romano ao período setecentista (reconstituição virtual dos antigos traçados das infra-estruturas de distribuição de água)

Ana Tomé /

Helena Rua

ISTAR – Computational Architecture Laboratory and Bioclimatic Architecture Laboratory – represents a new strategy for professional education in general and architectural design programs in particular; a strategy that employs educational technology to be experienced and applied in new design communities

ISTAR 2011 - Present



Manuel Correia Guedes Research Project Proposals (Construction, Architecture, Hidraulics)

March, Dec.11

José P. Duarte Applied Research Project Proposal “Solar Roads”, collaboration with Groups 2 and 3.

Jan. 11

José P. Duarte Research Project Proposal “Physical and Computational Modeling of Tensile Structures”, collaboration with Groups 2 and 3.

Apr. 11

Helena Rua / Alexandre Gonçalves (RG5)

Projecto: “Análise Histórica e Território. Contributo para o estudo da defesa de Lisboa – as Guerras Peninsulares”.

2010 - Present


A.1 Internacional


Organization Date

Teresa Heitor Post Graduation Programme in Architecture – Post Occupation Evaluation Course AUT 5805

Universidade de S.Paulo Faculdade de Arquitectura e Urbanismo

2 -8 October

Ana Tostões Between caNCER and Capricorn: an architecture Lab

MASTER HOUSING, 2nd Conference

Escuela Técnica Superior de Arquitectura Barcelona, ETSAB-UPC, Barcelona

Escuela Técnica Superior de Arquitectura, ETSAB-UPC

22 Nov.

A.2 National


Organization Date

Ana Tostões MODERNIDADE TRANSCONTINENTAL

Faculdade de Letras da Universidade de

Faculdade de Letras, Univ. de Coimbra,

4 May


__________________________________________________________________________________________

238

Coimbra, Instituto História Arte, Coimbra

Instituto História Arte




José P. Duarte Best paper presentation, runner up. CAAD Futures Conference. CAAD Futures Foundation



M. Correia Guedes Renewable Energy, Elsevier (8 papers in 2011)

M. Correia Guedes Built Environment (1 paper 2011)

José P. Duarte IJAC, International Journal of Architectural Computing. Reviewer, March 12 issue.

José P. Duarte Design Studies, Elsevier, Amsterdam, The Netherlands.

José P. Duarte Automation in Construction, Elsevier, Amsterdam, The Netherlands.

José P. Duarte EPB, Environment and Planning B: Planning and Design, Pion Ld., London, UK.

José P. Duarte UDI, Urban Design International, Palgrave Macmillan Journals, Houndmills, Basingstoke, Hampshire, Reino Unido

José P. Duarte Arquitetura Revista, Revista Semestral, UNISINOS - Universidade do Vale do Rio dos Sinos

José P. Duarte PARC, Pesquisa em Arquitetura e Construção, Revista Semestral, Departamento de Arquitetura e Construção da Faculdade de Engenharia Civil, Arquitetura e Urbanismo da UNICAMP

Teresa Heitor Revision of 1 paper for International Journal of Architectural Heritage Conservation, Analysis, and Restoration / Taylor & Francis

Teresa Heitor revision of 1 paper for Journal of Design Research / Inderscience Publishers

Ana Tostões Revision of 1 paper for Delft University Journal, Footprint




M. Correia Guedes Conselho consultivo para a area do Ambiente

Construido, e Juri para atribuição do Selo Verde,

Câmara Municipal do Seixal

Câmara Municipal do

Seixal

M. Correia Guedes Evaluation of PhD candidacies for the Foundation for

Science and Technology

FCT


__________________________________________________________________________________________

239

M. Correia Guedes Evaluation of Soares da Costa student prize

(Sustainable design)

Soares da Costa

M. Correia Guedes Evaluation of QREN candidacies QREN

José P. Duarte Ph.D. Scholarships competition Fundação para a Ciência

e a Tecnologia, Portugal

Teresa Heitor Technical and scientific revision of Doctoral and Post

Doctoral Thesis – grants assessment

Fundação para a Ciência

e a Tecnologia

Teresa Heitor Chair of External Review Team – previous accreditation

of new study cycles and Assessment/accreditation of

study cycles already in operation

A3ES - Agência de

Avaliação e Acreditação

do Ensino Superior



Correia Guedes, M. WREN-Asia SuDBE 2011, 5th World Renewable Energy Asia

Congress-Sustainable Development in Building and Environment,

Chongqing, China, 28-31 October 2011, Wren-UNESCO,

Chongqing,

29th October

Correia Guedes, M. Seminar on Sustainable Building, Macau, University of S. José Macau, 4th

Nov.

Correia Guedes, M. Ciclo de Workshops – Cluster Tecnologias Tropicais, AITEC-Oeiras Oeiras, 22

Nov.

José P. Duarte Mass Customization: models and algorithms, Keynote address, in

eCAADe 2011, 28th International Conference of the Education and

Research on Computer Aided Architectural Design in Europe, on

Fragile Places.

Ljubljana,

Slovenia,

September 1,

2011.

José P. Duarte Mass Customization: models and algorithms, Keynote address, in

SIM 2011, 1st International Conference on Sustainable Intelligent

Manufacturing.

Leiria,

Portugal, June

28–July 1,

2011

José P. Duarte Personalização em Série: modelos e algoritmos, Palestra principal, in

1ª Seminário Internacional AsBEA sobre Arquitectura Digital – BIM,

Sustentabilidade, Inovação, Associação Brasileira de Escritórios de

Arquitectura.

São Paulo,

Brasil, June

13–15, 2011

Heitor, T. OECD Centre for Effective Learning Environments (CELE)

International web conference seminar series, Standardised design”

for schools Old solution, new context?

30 March

2011

Ana Tostões Keynote lecture, Between caNCER and Capricorn: an architecture

Lab, MASTER HOUSING, 2nd Conference, Escuela Técnica

Superior de Arquitectura Barcelona, ETSAB-UPC

Barcelona, 22

Nov.

Ana Tostões UN LABORATÓRIO DE ARQUITECTURA: habitación moderna en

Angola e Mozambique, Universitat Ramon Llull, la Salle arq

Barcelona, 14

Dec.

Ana Tostões RECUPERACIÓN Y REHABILITACIÓN DEL PATRIMÓNIO MODERNO, Jornada Internacional LA MODERNIDAD IGNORADA, Universidad de Alcalá

Alcalá de Henares, 9 Nov.


__________________________________________________________________________________________

240

Ana Tostões UNITING ART AND TECHNIQUE WITH SOCIAL RESPONSIBILITY - THEME SESSION 5. UIA TOKYO 24th World Congress of Architecture - Tokyo International Forum

Tokyo, 27th Sep.

Ana Tostões TRANSITIONS. Monumentalidade, ditadura e democracia - VII Waterfronts of Art International Conference - TRANSITIONS - Auditório Complexo Interdisciplinar, IST, Lisboa

Lisboa,

6 Outubro

Ana Tostões FROM HISTORY TO PROJECT: Villa Tugendhat exemplar intervention - MATERIALS INSIDE OUSIDE, THICOM INTERNATIONAL CONFERENCE - Faculty of Architecture, Brno

Brno,1st July

Ana Tostões LOOKING BOTH SIDES. Modern Architecture in Sub-Saharan Africa, 9TH DOCOMOMO Brazil Seminar - Faculdade de Arquitectura e Urbanismo, Universidade de Brasília

Brasília,

10th June

Ana Tostões MODERN HERITAGE AS A RESOURCE FOR THE FUTURE - CAH20th International Conference Intervention Approaches for the 20th Century Architectural Heritage, Escuela Técnica Superior de Arquitectura Madrid, Campus de Moncloa | Círculo de Bellas-Artes

Madrid,

16th

June

Ana Tostões TROPICAL MODERNITY - Escuela Técnica Superior de Arquitectura Barcelona, ETSAB-UPC

Barcelona,

6 May

Ana Tostões PENSAR, HABITAR, CONSTRUIR - Colóquio Internacional de Arquitectura HABITAR, PENSAR, INVESTIGAR, FAZER - Universidade Autónoma de Lisboa

Lisboa,

14 Janeiro




Correia Guedes, M. Lecture at ISQ – Instituto de Soldadura e Qualidade

ISQ Lisbon, March

Correia Guedes, M. Lecture at ISQ – Instituto de Soldadura e Qualidade

ISQ Lisbon, December

José P. Duarte Workshop on Housing Grammars: new technologies for Housing Design. Co-Chair (com Arturo Lyon Gottlieb, Rodrigo García Alvarado). Financiamento: Fondecyt 1100374.

Alfero Computation Laboratory, Campus Lo Contador, Univ. Católica de Chile

Santiago, Chile. July 22-27, 2011

José P. Duarte Mass Customization of Housing, Open Conference, Workshop “Single Family Housing Grammar: New Technologies for Housing Design”.

Escuela de Arquitectura, Pontificia, Univ. Católica de Chile

Santiago, Chile, July 25, 2011

José P. Duarte Mass Customization of Housing, Open Conference,.

Univ. de Bío-Bío Concepción, Chile, July 20, 2011

José P. Duarte Tecnologia e Desenvolvimento Económico: assegurar o futuro, Palestra convidada, in Workshop Centro Histórico de São Luís: desafios e oportunidades.

Câmara Municipal de São Luis do Maranhão, Banco Mundial

São Luís, Brasil, January 25–26, 2011

Ana Tomé / Helena Rua

Workshop - Pré-fabricação Digital – ISTAR “Introdução aos Métodos de Concepção e

ISTAR, Lisbon IST, Lisbon, 21 Feb. - 4 March


__________________________________________________________________________________________

241

Fabricação Digital”

Workshop – Introduction to the Methods of Digital Fabrication

2011


Workshop - Get Blender: Introduction to Visualization Applied to Architecture

ISTAR, Lisbon IST, Lisbon, 28 Sept. - 4 Oct., 2011


Workshop - Using Revit: Introducing BIM and 3D Project

ISTAR, Lisbon IST, Lisbon, 2-11 Nov., 2011


Workshop – Generative Processes in the Architectural Design Practice (in collaboration with Rhino3DPortugal)

ISTAR, Lisbon IST, Lisbon, 21 Nov. 5 Dec., 2011

II.18 Models

José P. Duarte, City Induction: Modelo para a formulação, geração e avaliação de planos urbanos.


José P. Duarte, City Induction: Plataforma informática para a formulação, geração e avaliação de planos

urbanos.

II.20 Pilot plants

II.21 Prototypes

II.22 Patents

Pedido de patente PT 20111000032906 de 28/04/2011, Sistema para a Concepção e Fabrico Automáticos de

Mobiliário Personalizado, Inventores: Mário Barros, José P. Duarte, Bruno Chaparro. Patente pendente, Abr. 11

II.23 Miscellaneous

Morgado, L. Pensar a construção em madeira – Um pretexto para repensar a arquitectura, Public Lecture, in VII

Ciclo de Conferências da Universidade da Beira Interior, UBI, Covilhã, Portugal, May 2000.

INSTITUTO DE ENGENHARIA DE ESTRUTURAS, … · Scientific Report 2011 Programmed Research for 2012...

Documents

Transcript of INSTITUTO DE ENGENHARIA DE ESTRUTURAS, … · Scientific Report 2011 Programmed Research for 2012...