Publicação oficial do IPQ, enquanto Organismo Nacional de ... · PDF fileISO...

Mod-DNOR-01-08_01 Rua António Gião, 2 2829-513 CAPARICA Tel +351 212 948 100 Fax +351 212 948 223 www.ipq.pt

Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização

lista mensal maio 2012 A presente publicação tem por objetivo:

- A divulgação das Normas Portuguesas recentemente editadas e anuladas, bem como das Normas Europeias adotadas como Normas Portuguesas, e das Normas Europeias e Internacionais publicadas e já disponíveis.

- A divulgação pública dos projetos de Normas Portuguesas, Europeias e Internacionais, com vista à obtenção durante o período de inquérito público dos pontos de vista e contribuições nacionais que possam ser considerados na sequente elaboração, aprovação e homologação das Normas.

- A divulgação de propostas de novos trabalhos de normalização europeia e internacional, para que se possa obter, durante o período de inquérito público, os pontos de vista e as contribuições

nacionais. - A divulgação da edição e anulação de outros documentos normativos.

ÍNDICE

1. Normas Portuguesas 1.1 Normas Portuguesas publicadas …………………………………………………………………………3

1.2 Normas Portuguesas anuladas ………………………………………………………………………..…6

1.3 Normas Portuguesas em re-exame ……………………………………………………………………..8

1.4 Normas Europeias adotadas ……………………………………………………………………………..9

2. Normas Europeias Publicadas

2.1 CEN …………………………………………………………………………………………………………..10

2.2 CENELEC …………………………………………………………………………………………………....14

2.3 CEN/CENELEC ……………………………………………………………………………………………..19

2.4 ETSI …………………………………………………………………………………………………………...20

3. Normas Internacionais publicadas

IEC /ISO……………………………………………………………………………………………………………21

.

4. Projetos de normas portuguesas

4.1 Projetos em inquérito público …………………………………………………………………………..26

4.2 Projetos anulados ………………………………………………………………………………………....27

5. Projetos de normas e propostas de estudo de novas normas do Comité Europeu de Normalização(CEN e do Comité Europeu para a Normalização do Ferro e do Aço (ECISS)

5.1 Projetos em inquérito público ……………………………………………………………………….….28

5.2 Questionários preliminares ………………………………………………………………………………54

5.3 Comités Técnicos do CEN ……………………………………………………………………………….55

Mod-DNOR-01-08_01 Rua António Gião, 2 2829-513 CAPARICA Tel +351 212 948 100 Fax +351 212 948 223 www.ipq.pt


ÍNDICE (cont.)

6. Projetos de normas e propostas de estudo de novas normas do Comité Europeu de Normalização Electrotécnica (CENELEC)

6.1 Projetos em inquérito público ………………………………………………………………………….59

6.2 Propostas de anulação de Normas ………………………………………………………………….74

6.3 Proposta de estudo de novas normas - "Vilamoura Procedures" ………………………………75

6.4 Questionários preliminares ……………………………………………………………………………..76

7. Projetos de Normas e Propostas de Estudo de Novas Normas do Comité Europeu de Normalização (CEN) / Comité Europeu de Normalização Electrotécnica (CENELEC)


8. Projetos de normas do Instituto Europeu de Normalização para as Telecomunicações (ETSI)


8.2 Propostas de anulação de Normas ………………………………………………………………….80

9. Projetos de normas e propostas de estudo de novas Normas de Organização Internacional de Normalização (ISO)

9.1 Projetos em inquérito público …………………………………………………………………………81

9.2 Comités Técnicos da ISO ……………………………………………………………………………..108

10. Projetos de normas e propostas de estudo de novas normas da Comissão Electrotécnica Internacional (IEC)

10.1 Projetos em inquérito público ……………………………………………………………………...111

11. Projetos de normas da Organização Internacional de Normalização (ISO)/Comissão Eletrotécnica Internacional (IEC)

11.1 Projetos em inquérito público ………………………………………………………………………113

12. Edição e anulação de outros documentos Normativos 12.1 Edição de documento normativos…………………………………………………………………114

Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 3 15 maio 2012

normativosDOCUMENTOS Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização

1. Normas Portuguesas

1.1 Normas Portuguesas publicadas

Para cada referência, menciona-se a designação codificada (prefixos NP, NP EN, NP EN ISO, NP ISO, NP IEC, NP ISO/IEC, NP EN ISO/IEC, NP HD ou NP ENV, número, parte e data), o preço, o título e a correspondência a documentos europeus e/ou internacionais, quando existam, o número do Termo de Homologação e a respetiva data. As Normas Portuguesas referenciadas entram em vigor no dia seguinte ao da edição desta Lista Mensal. C10 / CT 1 NP EN ISO 1660:2012 ( 2ª Edição ) Preço: 10,50 EUR Desenhos técnicos Cotagem e toleranciamento de perfis (ISO 1660:1987) EN ISO 1660:1995 IDT Termo de Homologação nº 2012/0088, 2012-04-10 C10 / CT 1 NP EN ISO 3098-3:2012 ( 2ª Edição ) Preço: 10,50 EUR Documentação técnica de produtos Escrita Parte 3: Alfabeto grego (ISO 3098-3:2000) EN ISO 3098-3:2000 IDT Termo de Homologação nº 2012/0086, 2012-04-10 C10 / CT 1 NP EN ISO 3098-5:2012 ( 2ª Edição ) Preço: 55,00 EUR Documentação técnica de produtos Escrita Parte 5: Escrita em aplicações de desenho assistido por computador (CAD) do alfabeto latino, de algarismos e de sinais (ISO 3098-5:1997) EN ISO 3098-5:1997 IDT Termo de Homologação nº 2012/0080, 2012-04-10 C10 / CT 1 NP EN ISO 3098-6:2012 ( 2ª Edição ) Preço: 10,50 EUR Documentação técnica de produtos Escrita Parte 6: Alfabeto cirílico (ISO 3098-6:2000) EN ISO 3098-6:2000 IDT Termo de Homologação nº 2012/0087, 2012-04-10 C10 / CT 1 NP EN ISO 5455:2012 ( 2ª Edição ) Preço: 7,00 EUR Desenhos técnicos Escalas (ISO 5455:1979) EN ISO 5455:1994 IDT Termo de Homologação nº 2012/0081, 2012-04-10 C10 / CT 1 NP EN ISO 5456-1:2012 ( 2ª Edição ) Preço: 14,00 EUR Desenhos técnicos Métodos de projecção Parte 1: Sinopse (ISO 5456-1:1996) EN ISO 5456-1:1999 IDT Termo de Homologação nº 2012/0085, 2012-04-10 C10 / CT 1 NP EN ISO 6412-2:2012 ( 2ª Edição ) Preço: 21,00 EUR Desenhos técnicos Representação simplificada de tubagens Parte 2: Projecção isométrica (ISO 6412-2:1989) EN ISO 6412-2:1994 IDT Termo de Homologação nº 2012/0070, 2012-03-29

C10 / CT 1 NP EN ISO 6412-3:2012 ( 2ª Edição ) Preço: 10,50 EUR Desenhos técnicos Representação simplificada de tubagens Parte 3: Acessórios para sistemas de ventilação e de drenagem (ISO 6412-3:1993) EN ISO 6412-3:1996 IDT Termo de Homologação nº 2012/0071, 2012-03-29 C10 / CT 1 NP EN ISO 8826-2:2012 ( 2ª Edição ) Preço: 17,50 EUR Desenhos técnicos Rolamentos Parte 2: Representação simplificada particular (ISO 8826-2:1994) EN ISO 8826-2:1997 IDT Termo de Homologação nº 2012/0089, 2012-04-10 C10 / CT 1 NP EN ISO 9222-1:2012 ( 2ª Edição ) Preço: 10,50 EUR Desenhos técnicos Juntas de vedação para aplicação dinâmica Parte 1: Representação simplificada geral (ISO 9222-1:1989) EN ISO 9222-1:1995 IDT Termo de Homologação nº 2012/0083, 2012-04-10 C10 / CT 1 NP EN ISO 9222-2:2012 ( 2ª Edição ) Preço: 17,50 EUR Desenhos técnicos Juntas de vedação para aplicação dinâmica Parte 2: Representação simplificada particular (ISO 9222-2:1989) EN ISO 9222-2:1994 IDT Termo de Homologação nº 2012/0079, 2012-04-10 C10 / CT 1 NP ISO 13715:2012 ( 2ª Edição ) Preço: 21,00 EUR Desenhos técnicos Arestas de forma indefinida Vocabulário e indicações (ISO 13715:2000) ISO 13715:2000 IDT Termo de Homologação nº 2012/0084, 2012-04-10 C30 / CT 3 NP EN 13523-11:2012 ( 1ª Edição ) Preço: 10,50 EUR Bandas metálicas pré-revestidas Métodos de ensaio Parte 11: Resistência aos solventes (ensaio de esfrega) EN 13523-11:2011 IDT Termo de Homologação nº 2012/0078, 2012-04-10 C40 / CT 4 NP EN ISO 3759:2012 ( 3ª Edição ) Preço: 10,50 EUR Têxteis Preparação, marcação e medição de provetes de tecido e vestuário em ensaios para a determinação das variações dimensionais (ISO 3759:2011) EN ISO 3759:2011 IDT



Termo de Homologação nº 2012/0094, 2012-04-17 C120 / CT 12 NP EN ISO 6506-3:2012 ( 1ª Edição ) Preço: 14,00 EUR Materiais metálicos Ensaio de dureza Brinell Parte 3: Calibração de blocos de referência (ISO 6506-3:2005) EN ISO 6506-3:2005 IDT Termo de Homologação nº 2012/0010, 2012-01-20 C120 / CT 12 NP EN ISO 6506-4:2012 ( 1ª Edição ) Preço: 17,50 EUR Materiais metálicos Ensaio de dureza Brinell Parte 4: Quadro de valores de dureza (ISO 6506-4:2005) EN ISO 6506-4:2005 IDT Termo de Homologação nº 2012/0011, 2012-01-20 C120 / CT 12 NP EN ISO 6507-2:2012 ( 1ª Edição ) Preço: 21,00 EUR Materiais metálicos Ensaio de dureza Vickers Parte 2: Verificação e calibração das máquinas de ensaio (ISO 6507-2:2005) EN ISO 6507-2:2005 IDT Termo de Homologação nº 2012/0067, 2012-03-29 C140 / CT 14 NP EN 300:2012 ( 2ª Edição ) Preço: 21,00 EUR Aglomerado de partículas de madeira longas e orientadas (OSB) Definições, classificação e especificações EN 300:2006 IDT Termo de Homologação nº 2012/0106, 2012-04-26 C140 / CT 14 NP EN 314-1:2012 ( 2ª Edição ) Preço: 21,00 EUR Contraplacado Qualidade da colagem Parte 1: Métodos de ensaio EN 314-1:2004 IDT Termo de Homologação nº 2012/0105, 2012-04-26 C140 / CT 14 NP EN 316:2012 ( 2ª Edição ) Preço: 10,50 EUR Aglomerado de fibras de madeira Definição, classificação e símbolos EN 316:2009 IDT Termo de Homologação nº 2012/0107, 2012-04-26 C140 / CT 14 NP EN 13183-2:2012 ( 1ª Edição ) Preço: 10,50 EUR Teor de água de um provete de madeira serrada Parte 2: Estimativa pelo método da resistência elétrica EN 13183-2:2002 IDT Termo de Homologação nº 2012/0108, 2012-04-26 C180 / CT 18 NP EN 10151:2012 ( 1ª Edição ) Preço: 28,00 EUR Bandas de aço inoxidável para molas Condições técnicas de fornecimento EN 10151:2002 IDT Termo de Homologação nº 2012/0013, 2012-01-27 C250 / CT 25 NP 3141-1:2011 ( 1ª Edição ) Preço: 7,00 EUR Produtos da pesca e da aquicultura Determinação do teor de azoto do óxido de trimetilamina (N-OTMA) Parte 1: Método de Conway Termo de Homologação nº 2011/0295, 2011-12-16 C250 / CT 25 NP 3141-2:2011 ( 1ª Edição ) Preço: 7,00 EUR Produtos da pesca e da aquicultura Determinação do teor de azoto de óxido de trimetilamina (N-OTMA) Parte 2: Método espectrofotométrico Termo de Homologação nº 2011/0296, 2011-12-16

C340 / CT 34 NP EN 755-2:2012 ( 2ª Edição ) Preço: 55,00 EUR Alumínio e ligas de alumínio Barras, tubos e perfis extrudidos Parte 2: Características mecânicas EN 755-2:2008 IDT Termo de Homologação nº 2012/0017, 2012-02-06 C580 / CT 58 NP EN ISO 1183-1:2012 ( 1ª Edição ) Preço: 14,00 EUR Materiais plásticos Métodos para determinação da massa volúmica de materiais plásticos não celulares Parte 1: Método por imersão, método de picnómetro em meio líquido e método por titulação (ISO 1183-1:2004) EN ISO 1183-1:2004 IDT Termo de Homologação nº 2012/0044, 2012-03-07 C1170 / CT 117 NP EN 12541:2012 ( 1ª Edição ) Preço: 31,50 EUR Torneiras sanitárias Fluxómetros de sanita e torneiras temporizadas de urinol PN 10 EN 12541:2002 IDT Termo de Homologação nº 2012/0055, 2012-03-13 C1440 / CT 144 NP 4507:2012 ( 1ª Edição ) Preço: 17,50 EUR Turismo de Natureza Empreendimentos de Turismo de Natureza Termo de Homologação nº 2012/0073, 2012-04-05 C1500 / CT 150 NP EN ISO 14064-3:2012 ( 1ª Edição ) Preço: 40,00 EUR Gases com efeito de estufa Parte 3: Especificações com linhas de orientação ao nível da validação e verificação de declarações de gases com efeito de estufa EN ISO 14064-3:2012 IDT Termo de Homologação nº 2012/0054, 2012-03-12 E200 / CT 2 NP EN 60034-1:2012 ( 2ª Edição ) Preço: 55,00 EUR Máquinas elétricas rotativas Parte 1: Características estipuladas e características de funcionamento (IEC 60034-1:2010, modificada) EN 60034-1:2010 IDT;EN 60034-1:2010 /CORRIGENDUM Oct:20 Termo de Homologação nº 2012/0015, 2012-02-06 E1700 / CT 17 NP EN 61439-1:2011 ( 1ª Edição ) Preço: 78,50 EUR Conjuntos de aparelhagem de baixa tensão Parte 1: Regras gerais (IEC 61439-1:2009, modificada) EN 61439-1:2009 IDT Termo de Homologação nº 2011/0213, 2011-11-17 E1700 / CT 17 NP EN 61439-2:2011 ( 1ª Edição ) Preço: 24,50 EUR Conjuntos de aparelhagem de baixa tensão Parte 2: Conjuntos de aparelhagem de potência (IEC 61439-2:2009) EN 61439-2:2009 IDT Termo de Homologação nº 2011/0222, 2011-11-17 E3400 / CT 34 NP EN 61347-2-3:2003 /A 1:2012 ( 1ª Edição ) Preço: 10,50 EUR Aparelhagem de comando para lâmpadas Parte 2-3: Requisitos particulares para os balastros eletrónicos alimentados em corrente alternada para lâmpadas fluorescentes (IEC 61347-2-3:2000/A1:2004) EN 61347-2-3:2001 /A 1:2004 IDT Termo de Homologação nº 2012/0004, 2012-01-18 E6100 / CT 61 NP EN 60335-2-11:2012 ( 5ª Edição ) Preço: 28,00 EUR Aparelhos eletrodomésticos e análogos Segurança Parte 2-11: Requisitos particulares para os secadores de tambor (IEC 60335-2-11:2008, modificada) EN 60335-2-11:2010 IDT



Termo de Homologação nº 2012/0007, 2012-01-19 E6100 / CT 61 NP EN 60335-2-25:2008 /A 11:2011 ( 1ª Edição ) Preço: 10,50 EUR Aparelhos eletrodomésticos e análogos Segurança Parte 2-25: Requisitos particulares para os fornos de micro-ondas, incluindo os fornos de micro-ondas combinados EN 60335-2-25:2002 /A 11:2010 IDT Termo de Homologação nº 2011/0300, 2011-12-16 E6100 / CT 61 NP EN 60335-2-97:2008 /A 11:2011 ( 1ª Edição ) Preço: 7,00 EUR Aparelhos eletrodomésticos e análogos Segurança Parte 2-97: Requisitos particulares para as motorizações de persianas, toldos, estores e equipamentos análogos EN 60335-2-97:2006 /A 11:2008 IDT Termo de Homologação nº 2011/0310, 2011-12-16 E7200 / CT 72 NP EN 60730-2-7:2012 ( 2ª Edição ) Preço: 21,00 EUR Dispositivos de comando elétrico automáticos para uso doméstico e análogo Parte 2-7: Requisitos particulares para os temporizadores e os temporizadores cíclicos (IEC 60730-2-7:2008, modificada) EN 60730-2-7:2010 IDT Termo de Homologação nº 2012/0009, 2012-01-20 E7200 / CT 72 NP EN 60730-2-9:2012 ( 2ª Edição ) Preço: 47,50 EUR Dispositivos de comando elétrico automáticos para uso doméstico e análogo Parte 2-9: Requisitos particulares para os dispositivos de comando termo-sensíveis (IEC 60730-2-9:2008, modificada) EN 60730-2-9:2010 IDT Termo de Homologação nº 2012/0001, 2012-01-12



1.2 Normas Portuguesas anuladas Para cada referência, menciona-se a designação codificada (prefixos NP, NP EN, NP EN ISO, NP ISO, NP IEC, NP ISO/IEC, NP EN ISO/IEC, NP HD ou NP ENV, número, parte e data), o título, a correspondência a documentos europeus e/ou internacionais quando existam, o número do Termo

de (Anulação, Homologação ou Adoção) e a respetiva data, bem como a referência do documento que a substitui. As anulações das Normas Portuguesas referenciadas tornam-se efetivas no dia seguinte ao da edição desta Lista Mensal. C10 / CT 1 NP EN ISO 1660:2002 ( 1ª Edição ) Desenhos técnicos Cotagem e toleranciamento de perfis (ISO 1660:1987) EN ISO 1660:1995 IDT Anulada em: 2012-04-23 Substituida por: NP EN ISO 1660:2012 C10 / CT 1 NP EN ISO 3098-3:2002 ( 1ª Edição ) Documentação técnica de produtos Escrita Parte 3: Alfabeto grego (ISO 3098-3:2000) EN ISO 3098-3:2000 IDT Anulada em: 2012-04-24 Substituida por: NP EN ISO 3098-3:2012 C10 / CT 1 NP EN ISO 3098-5:2002 ( 1ª Edição ) Documentação técnica de produtos Escrita Parte 5: Escrita em aplicações de desenho assistido por computador (CAD) do alfabeto latino, de algarismos e de sinais (ISO 3098-5:1997) EN ISO 3098-5:1997 IDT Anulada em: 2012-04-24 Substituida por: NP EN ISO 3098-5:2012 C10 / CT 1 NP EN ISO 3098-6:2002 ( 1ª Edição ) Documentação técnica de produtos Escrita Parte 5: Escrita em aplicações de desenho assistido por computador (CAD) do alfabeto latino, de algarismos e de sinais (ISO 3098-5:1997) EN ISO 3098-6:2000 IDT Anulada em: 2012-04-23 Substituida por: NP EN ISO 3098-6:2012 C10 / CT 1 NP EN ISO 5455:2002 ( 1ª Edição ) Desenhos técnicos Escalas (ISO 5455:1979) EN ISO 5455:1994 IDT Anulada em: 2012-04-23 Substituida por: NP EN ISO 5455:2012 C10 / CT 1 NP EN ISO 5456-1:2002 ( 1ª Edição ) Desenhos técnicos Métodos de projecção Parte 1: Sinopse (ISO 5456-1:1996) EN ISO 5456-1:1999 IDT Anulada em: 2012-04-23 Substituida por: NP EN ISO 5456-1:2012 C10 / CT 1 NP EN ISO 6412-2:2002 ( 1ª Edição ) Desenhos técnicos Representação simplificada de tubagens Parte 2: Projecção isométrica (ISO 6412-2:1989) EN ISO 6412-2:1994 IDT Anulada em: 2012-04-23 Substituida por: NP EN ISO 6412-2:2012

C10 / CT 1 NP EN ISO 6412-3:2002 ( 1ª Edição ) Desenhos técnicos Representação simplificada de tubagens Parte 3: Acessórios para sistemas de ventilação e de drenagem (ISO 6412-3:1993) EN ISO 6412-3:1996 IDT Anulada em: 2012-04-23 Substituida por: NP EN ISO 6412-3:2012 C10 / CT 1 NP EN ISO 8826-2:2002 ( 1ª Edição ) Desenhos técnicos Rolamentos Parte 2: Representação simplificada particular (ISO 8826-2:1994) EN ISO 8826-2:1997 IDT Anulada em: 2012-04-24 Substituida por: NP EN ISO 8826-2:2012 C10 / CT 1 NP EN ISO 9222-1:2002 ( 1ª Edição ) Desenhos técnicos Juntas de vedação para aplicação dinâmica Parte 1: Representação simplificada geral (ISO 9222-1:1989) EN ISO 9222-1:1995 IDT Anulada em: 2012-04-23 Substituida por: NP EN ISO 9222-1:2012 C10 / CT 1 NP EN ISO 9222-2:2002 ( 1ª Edição ) Desenhos técnicos Juntas de vedação para aplicação dinâmica Parte 2: Representação simplificada particular (ISO 9222-2:1989) EN ISO 9222-2:1994 IDT Anulada em: 2012-04-23 Substituida por: NP EN ISO 9222-2:2012 C10 / CT 1 NP ISO 13715:2002 ( 1ª Edição ) Desenhos técnicos Arestas de forma indefinida Vocabulário e indicações ISO 13715:2000 IDT Anulada em: 2012-04-23 Substituida por: NP ISO 13715:2012 C20 / CT 2 NP EN 14861-:2004+A1:2010 ( 2ª Edição ) Máquinas florestais Máquinas automotrizes Requisitos de segurança EN 14861-:2004+A1:2009 IDT Anulada em: 2012-04-11 Substituida por: EN ISO 11850:2011 C40 / CT 4 NP EN 29092:1993 ( 1ª Edição ) Têxteis Tecidos não-tecidos. Definição EN 29092:1992 IDT Anulada em: 2012-04-23 Substituida por: EN ISO 9092:2011



C60 / CT 6 NP EN 23035:1995 ( 1ª Edição ) Cartão canelado de simples face e de dupla face Determinação da resistência ao esmagamento plano EN 23035:1994 IDT Anulada em: 2012-04-11 Substituida por: EN ISO 3035:2011 C120 / CT 12 NP EN 10245-1:2009 ( 2ª Edição ) Arames e produtos trefilados de aço Revestimentos orgânicos em arames de aço Parte 1: Princípios gerais EN 10245-1:2001 IDT Anulada em: 2012-04-23 Substituida por: EN 10245-1:2011 C120 / CT 12 NP EN 10245-2:2009 ( 2ª Edição ) Arames e produtos trefilados de aço Revestimentos orgânicos em arames de aço Parte 2: Arames revestidos de PVC EN 10245-2:2001 IDT Anulada em: 2012-04-23 Substituida por: EN 10245-2:2011 C120 / CT 12 NP EN 10270-1:2009 ( 1ª Edição ) Arames de aço para molas mecânicas Parte 1: Arames para molas de aço não ligado, patentados e trefilados a frio EN 10270-1:2001 IDT Anulada em: 2012-04-23 Substituida por: EN 10270-1:2011 C121 / CT 12 NP EN 10245-3:2009 ( 2ª Edição ) Arames e produtos trefilados de aço Revestimentos orgânicos em arames de aço Parte 3: Arames revestidos de PE EN 10245-3:2001 IDT Anulada em: 2012-04-23 Substituida por: EN 10245-3:2011 C480 / CT 48 NP EN 13037:2009 ( 1ª Edição ) Correctivos orgânicos do solo e suportes de cultura Determinação do pH EN 13037:1999 IDT Anulada em: 2012-04-11 Substituida por: EN 13037:2011 C480 / CT 48 NP EN 13038:2009 ( 1ª Edição ) Correctivos orgânicos do solo e suportes de cultura Determinação da condutividade eléctrica EN 13038:1999 IDT Anulada em: 2012-04-11 Substituida por: EN 13038:2011 C480 / CT 48 NP EN 13039:2009 ( 1ª Edição ) Correctivos orgânicos do solo e suportes de cultura Determinação dos teores de matéria orgânica e de cinzas EN 13039:1999 IDT Anulada em: 2012-04-1 Substituida por: EN 13039:2011 C800 / CT 80 NP EN ISO 19011:2003 ( 1ª Edição ) Linhas de orientação para auditorias de sistemas de gestão da qualidade e/ou de gestão ambiental (ISO 19011:2002) EN ISO 19011:2002 IDT Anulada em: 2012-04-11 Substituida por: EN ISO 19011:2011

E999 / CTE NP EN 60601-2-44:2003 ( 1ª Edição ) Equipamento eléctrico para medicina Parte 2-44: Requisitos particulares de segurança para equipamento de raios-X para tomografia computorizada (IEC 60601-2-44:2001) EN 60601-2-44:2001 IDT Anulada em: 2012-04-27 Substituida por: EN 60601-2-44:2009 E6100 / CTE 61 NP EN 61770:2007 ( 1ª Edição ) Aparelhos eléctricos ligados à alimentação de água Fuga do sifão traseiro e falha das mangueiras de acoplamento (IEC 61770:1998 + A1:2004 + A2:2006) EN 61770:1999 IDT;EN 61770:1999 /CORRIGENDUM Aug:2007 ID Anulada em: 2012-04-27 Substituída por: NP EN 61770:2009



1.3 Normas Portuguesas em re-exame Com o objetivo de se assegurar a atualidade das normas integrantes do acervo normativo nacional, as Normas Portuguesas devem ser objeto de um re-exame periódico. Mensalmente, o IPQ colocará em inquérito público, por um período de 30 dias úteis, através da Lista Mensal Normas e do site, uma lista de normas portuguesas pertencentes a um determinado escalão etário. Para cada referência, menciona-se a designação codificada (prefixo NP, número, parte e data), o título e a respetiva data, bem como o seu autor. Pretende-se com este inquérito público, que os interessados que pretendam dar os seus contributos o possam fazer, para cada uma das normas portuguesas constantes na presente listagem, respondendo aos seguintes pontos, tendo em conta a vossa experiência:

1 - Avaliação em termos de atualidade, a responder em alternativa: � A norma portuguesa está atual ? � A norma portuguesa deve ser revista ? � A norma portuguesa está obsoleta ?

2 - Eventual legislação relacionada: � A norma portuguesa está referida em legislação ? Se sim, qual ?

3 - Comentário

NOTA: Os interessados são convidados a pronunciarem-se somente sobre as normas que entendam conveniente, devendo enviar a informação ao Serviço de Normalização ( [email protected] )

.

LISTA VAZIA



1.4 Normas Europeias adotadas Para cada Norma, indica-se a designação codificada (prefixo, número, ano), o título, o número do Termo de Adoção e a respetiva data. Os textos das Normas Europeias Adotadas como Normas Portuguesas estão disponíveis para consulta ou aquisição neste Instituto nas línguas oficiais do CEN/CENELEC (inglês, francês e

alemão) e do ETSI (inglês). As adoções das Normas Europeias referenciadas entram em vigor no dia seguinte ao da edição desta Lista Mensal.

LISTA VAZIA



2. Normas Europeias Publicadas

2.1 CEN Normas Europeias aprovadas na área não eletrotécnica pelo Comité Europeu de Normalização (CEN), e pelo Comité Europeu para a Normalização do Ferro e do Aço (ECISS).

Para cada referência, menciona-se o comité técnico, a designação codificada e o título. EN ISO 11930:2012 ( Ed. 1 ) Cosmetics Microbiology Evaluation of the antimicrobial protection of a cosmetic product (ISO 11930:2012) TC 19 CEN/TR 16366:2012 ( Ed. 1 ) Liquid petroleum products Middle distillates and fatty acid methyl ester (FAME) fuels and blends Round Robin report on applicability of Rapid Small Scale Oxidation Test method TC 23 EN ISO 10961:2012 ( Ed. 1 ) Gas cylinders Cylinder bundles Design, manufacture, testing and inspection (ISO 10961:2010) TC 49 EN 30-1-2:2012 ( Ed. 2 ) Domestic cooking appliances burning gas Safety Part 1-2: Appliances having forced-convection ovens and/or grills TC 55 EN ISO 21672-1:2012 ( Ed. 1 ) Dentistry Periodontal probes Part 1: General requirements (ISO 21672-1:2012) TC 58 EN 126:2012 ( Ed. 3 ) Multifunctional controls for gas burning appliances TC 67 EN 14891:2012 ( Ed. 2 ) Liquid-applied water impermeable products for use beneath ceramic tiling bonded with adhesives Requirements, test methods, evaluation of conformity, classification and designation TC 69 EN 12266-1:2012 ( Ed. 2 ) Industrial valves Testing of metallic valves Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements TC 104 CEN/TR 16349:2012 ( Ed. 1 ) Framework for a specification on the avoidance of a damaging Alkali-Silica Reaction (ASR) in concrete TC 113 EN 14825:2012 ( Ed. 1 ) Air conditioners, liquid chilling packages and heat pumps, with electrically driven compressors, for space heating and cooling Testing and rating at part load conditions and calculation of seasonal performance

TC 121 EN ISO 14271:2011 /AC :2012 ( Ed. 1 ) Resistance welding Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds Technical Corrigendum 1 (ISO 14271:2011/Cor 1:2012) TC 124 EN 1912:2012 ( Ed. 3 ) Structural Timber Strength classes Assignment of visual grades and species TC 125 EN 1745:2012 ( Ed. 2 ) Masonry and masonry products Methods for determining thermal properties TC 133 EN 12449:2012 ( Ed. 2 ) Copper and copper alloys Seamless, round tubes for general purposes TC 137 EN 482:2012 ( Ed. 3 ) Workplace exposure General requirements for the performance of procedures for the measurement of chemical agents TC 138 CEN/TR 16332:2012 ( Ed. 1 ) Non-destructive testing Interpretation of EN ISO/IEC 17024 for NDT personnel certification application TC 142 EN 1870-13:2007+A2:2012 ( Ed. 1 ) Safety of woodworking machines Circular sawing machines Part 13: Horizontal beam panel sawing machines TC 142 EN 1870-14:2007+A2:2012 ( Ed. 1 ) Safety of woodworking machines Circular sawing machines Part 14: Vertical panel sawing machines TC 143 EN ISO 23125:2010 /A 1:2012 ( Ed. 1 ) Machine tools - Safety Turning machines Amendment 1 (ISO 23125:2010/Amd 1:2012) TC 147 EN 13001-3-1:2012 ( Ed. 1 ) Cranes General Design Part 3-1: Limit States and proof competence of steel structure TC 155 CEN/TS 13598-3:2012 ( Ed. 1 ) Plastics piping systems for non-pressure underground drainage and sewerage Unplasticized poly(vinyl chloride)(PVC-U), polypropylene (PP) and polyethylene (PE) Part 3: Guidance for assessment of



conformity TC 170 EN ISO 12870:2012 ( Ed. 4 ) Ophthalmic optics Spectacle frames Requirements and test methods (ISO 12870:2012) TC 170 EN ISO 19980:2012 ( Ed. 2 ) Ophthalmic instruments Corneal topographers (ISO 19980:2012) TC 175 CEN/TS 15912:2012 ( Ed. 1 ) Durability of reaction to fire performance Classes of fireretardant treated wood-based product in interior and exterior end use applications TC 175 EN 13629:2012 ( Ed. 2 ) Wood flooring Solid individual and pre-assembled hardwood boards TC 191 EN 671-1:2012 ( Ed. 3 ) Fixed firefighting systems Hose systems Part 1: Hose reels with semi-rigid hose TC 191 EN 671-2:2012 ( Ed. 3 ) Fixed firefighting systems Hose systems Part 2: Hose systems with lay-flat hose TC 195 EN 779:2012 ( Ed. 3 ) Particulate air filters for general ventilation Determination of the filtration performance TC 197 EN 13951:2012 ( Ed. 2 ) Liquid pumps Safety requirements Agrifoodstuffs equipment; Design rules to ensure hygiene in use TC 198 EN 1034-26:2012 ( Ed. 1 ) Safety of machinery Safety requirements for the design and construction of paper making and finishing machines Part 26: Roll packaging machines TC 205 EN ISO 11608-1:2012 ( Ed. 2 ) Needle-based injection systems for medical use Requirements and test methods Part 1: Needle-based injection systems (ISO 11608-1:2012) TC 205 EN ISO 11608-2:2012 ( Ed. 2 ) Needle-based injection systems for medical use Requirements and test methods Part 2: Needles (ISO 11608-2:2012) TC 207 EN 747-1:2012 ( Ed. 3 ) Furniture Bunk beds and high beds Part 1: Safety, strength and durability requirements TC 207 EN 747-2:2012 ( Ed. 3 ) Furniture Bunk beds and high beds Part 2: Test methods TC 207 EN 13759:2012 ( Ed. 1 ) Furniture Operating mechanisms for seating and sofa-beds Test methods

TC 207 EN 15186:2012 ( Ed. 1 ) Furniture Assessment of the surface resistance to scratching TC 225 EN ISO 19762-1:2012 ( Ed. 1 ) Information technology Automatic identification and data capture (AIDC) techniques - Harmonized vocabulary Part 1: General terms relating to AIDC (ISO/IEC 19762-1:2008) TC 225 EN ISO 19762-3:2012 ( Ed. 1 ) Information technology Automatic identification and data capture (AIDC) techniques - Harmonized vocabulary Part 3: Radio frequency identification (RFID) (ISO/IEC 19762-3:2008) TC 226 CEN/TR 1317-6:2012 ( Ed. 1 ) Road restraint systems Part 6: Pedestrian restraint system - Pedestrian parapets TC 226 CEN/TS 1317-8:2012 ( Ed. 1 ) Road restraint systems Part 8: Motorcycle road restraint systems which reduce the impact severity of motorcyclist collisions with safety barriers TC 227 EN 12697-6:2012 ( Ed. 2 ) Bituminous mixtures Test methods for hot mix asphalt Part 6: Determination of bulk density of bituminous specimens TC 227 EN 12697-11:2012 ( Ed. 3 ) Bituminous mixtures Test methods for hot mix asphalt Part 11: Determination of the affinity between aggregate and bitumen TC 227 EN 12697-19:2012 ( Ed. 2 ) Bituminous mixtures Test methods for hot mix asphalt Part 19: Permeability of specimen TC 227 EN 12697-20:2012 ( Ed. 2 ) Bituminous mixtures Test methods for hot mix asphalt Part 20: Indentation using cube or cylindrical specimens (CY) TC 227 EN 12697-21:2012 ( Ed. 2 ) Bituminous mixtures Test methods for hot mix asphalt Part 21: Indentation using plate specimens TC 227 EN 12697-30:2012 ( Ed. 2 ) Bituminous mixtures Test methods for hot mix asphalt Part 30: Specimen preparation by impact compactor TC 227 EN 12697-45:2012 ( Ed. 1 ) Bituminous mixtures Test methods for hot mix asphalt Part 45: Saturation Ageing Tensile Stiffness (SATS) conditioning test TC 227 EN 13286-47:2012 ( Ed. 2 ) Unbound and hydraulically bound mixtures Part 47: Test method for the determination of California bearing ratio, immediate bearing index and linear swelling TC 227 EN 13863-4:2012 ( Ed. 2 ) Concrete pavements Part 4: Test methods for the determination of wear resistance of concrete pavements to studded tyres



TC 230 EN 16150:2012 ( Ed. 1 ) Water quality Guidance on pro-rata Multi-Habitat sampling of benthic macro-invertebrates from wadeable rivers TC 230 EN ISO 12846:2012 ( Ed. 1 ) Water quality Determination of mercury Method using atomic absorption spectrometry (AAS) with and without enrichment (ISO 12846:2012) TC 239 EN 1865-4:2012 ( Ed. 1 ) Patient handling equipment used in road ambulances Part 4: Foldable patient transfer chair TC 246 EN 1467:2012 ( Ed. 2 ) Natural stone Rough blocks Requirements TC 246 EN 1468:2012 ( Ed. 2 ) Natural stone Rough slabs Requirements TC 246 EN 14617-4:2012 ( Ed. 2 ) Agglomerated stone Test methods Part 4: Determination of the abrasion resistance TC 246 EN 14617-5:2012 ( Ed. 2 ) Agglomerated stone Test methods Part 5: Determination of freeze and thaw resistance TC 246 EN 14617-6:2012 ( Ed. 2 ) Agglomerated stone Test methods Part 6: Determination of thermal shock resistance TC 246 EN 14617-10:2012 ( Ed. 2 ) Agglomerated stone Test methods Part 10: Determination of chemical resistance TC 246 EN 14617-12:2012 ( Ed. 2 ) Agglomerated stone Test methods Part 12: Determination of dimensional stability TC 248 EN ISO 3758:2012 ( Ed. 2 ) Textiles Care labelling code using symbols (ISO 3758:2012) TC 248 EN ISO 6330:2012 ( Ed. 2 ) Textiles Domestic washing and drying procedures for textile testing (ISO 6330:2012) TC 249 EN ISO 179-2:1999 /A 1:2012 ( Ed. 1 ) Plastics Determination of Charpy impact properties Part 2: Instrumented impact test - Amendment 1: Precision data (ISO 179-2:1997/Amd 1:2011) TC 249 EN ISO 7214:2012 ( Ed. 3 ) Cellular plastics Polyethylene Methods of test (ISO 7214:2012) TC 254 EN 13967:2012 ( Ed. 2 ) Flexible sheets for waterproofing Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet

Definitions and characteristics TC 256 EN 13146-1:2012 ( Ed. 2 ) Railway applications Track - Test methods for fastening systems Part 1: Determination of longitudinal rail restraint TC 256 EN 13146-2:2012 ( Ed. 2 ) Railway applications Track - Test methods for fastening systems Part 2: Determination of torsional resistance TC 256 EN 13146-3:2012 ( Ed. 2 ) Railway applications Track - Test methods for fastening systems Part 3: Determination of attenuation of impact loads TC 256 EN 13146-4:2012 ( Ed. 2 ) Railway applications Track - Test methods for fastening systems Part 4: Effect of repeated loading TC 256 EN 13146-5:2012 ( Ed. 2 ) Railway applications Track - Test methods for fastening systems Part 5: Determination of electrical resistance TC 256 EN 13146-6:2012 ( Ed. 2 ) Railway applications Track - Test methods for fastening systems Part 6: Effect of severe environmental conditions TC 256 EN 13146-7:2012 ( Ed. 2 ) Railway applications Track - Test methods for fastening systems Part 7: Determination of clamping force TC 256 EN 13146-8:2012 ( Ed. 2 ) Railway applications Track - Test methods for fastening systems Part 8: In service testing TC 260 CEN/TS 16317:2012 ( Ed. 1 ) Fertilizers Determination of trace elements Determination of arsenic by inductively coupled plasma-atomic emission spectrometry (ICP-AES) after aqua regia dissolution TC 260 CEN/TS 16318:2012 ( Ed. 1 ) Fertilizers Determination of trace elements Determination of chromium(VI) by photometry (method A) and by ion chromatography with spectrophotometric detection (method B) TC 260 CEN/TS 16319:2012 ( Ed. 1 ) Fertilizers Determination of trace elements Determination of cadmium, chromium, lead and nickel by inductively coupled plasma-atomic emission spectrometry (ICP-AES) after aqua regia dissolution TC 260 CEN/TS 16320:2012 ( Ed. 1 ) Fertilizers Determination of trace elements Determination of mercury by vapour generation (VG) after aqua regia dissolution TC 263 EN 1143-1:2012 ( Ed. 3 ) Secure storage units Requirements, classification and methods of test for resistance to burglary Part 1: Safes, ATM safes, strongroom doors and strongrooms



TC 266 EN 13575:2012 ( Ed. 2 ) Static thermoplastic tanks for the above ground storage of chemicals Blow moulded or rotationally moulded polyethylene tanks Requirements and test methods TC 275 EN 16155:2012 ( Ed. 1 ) Foodstuffs Determination of sucralose High performance liquid chromatographic method TC 278 EN 15876-1:2010+A1:2012 ( Ed. 1 ) Electronic fee collection Evaluation of on-board and roadside equipment for conformity to EN 15509 Part 1: Test suite structure and test purposes TC 286 EN 13799:2012 ( Ed. 2 ) LPG equipment and accessories Contents gauges for Liquefied Petroleum Gas (LPG) pressure vessels TC 286 EN 15609:2012 ( Ed. 2 ) LPG equipment and accessories LPG propulsion systems for boats, yachts and other craft TC 287 EN ISO 19111-2:2012 ( Ed. 1 ) Geographic information Spatial referencing by coordinates Part 2: Extension for parametric values (ISO 19111-2:2009) TC 287 EN ISO 19143:2012 ( Ed. 1 ) Geographic information Filter encoding (ISO 19143:2010) TC 287 EN ISO 19144-1:2012 ( Ed. 1 ) Geographic information Classification systems Part 1: Classification system structure (ISO 19144-1:2009) TC 290 EN ISO 25178-2:2012 ( Ed. 1 ) Geometrical product specifications (GPS) Surface texture: Areal Part 2: Terms, definitions and surface texture parameters (ISO 25178-2:2012) TC 312 EN 12977-1:2012 ( Ed. 1 ) Thermal solar systems and components Custom built systems Part 1: General requirements for solar water heaters and combisystems TC 312 EN 12977-2:2012 ( Ed. 1 ) Thermal solar systems and components Custom built systems Part 2: Test methods for solar water heaters and combisystems TC 312 EN 12977-3:2012 ( Ed. 2 ) Thermal solar systems and components Custom built systems Part 3: Performance test methods for solar water heater stores TC 312 EN 12977-4:2012 ( Ed. 1 ) Thermal solar systems and components Custom built systems Part 4: Performance test methods for solar combistores TC 312 EN 12977-5:2012 ( Ed. 1 ) Thermal solar systems and components Custom built systems Part 5:

Performance test methods for control equipment TC 327 EN 16215:2012 ( Ed. 1 ) Animal feeding stuffs Determination of dioxins and dioxin-like PCBs by GC/HRMS and of indicator PCBs by GC/HRMS TC 337 CEN/TS 15430-2:2012 ( Ed. 1 ) Winter and road service area maintenance equipment Data acquisition and transmission Part 2: Protocol for data transfer between information supplier and client application server TC 339 CEN/TS 16165:2012 ( Ed. 1 ) Determination of slip resistance of pedestrian surfaces Methods of evaluation TC 343 EN 15415-2:2012 ( Ed. 1 ) Solid recovered fuels Determination of particle size distribution Part 2: Maximum projected length method (manual) for large dimension particles TC 343 EN 15415-3:2012 ( Ed. 1 ) Solid recovered fuels Determination of particle size distribution Part 3: Method by image analysis for large dimension particles TC ECISS/109 EN 10169-:2010+A1:2012 ( Ed. 1 ) Continuously organic coated (coil coated) steel flat products Technical delivery conditions

Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 14 15 maio2012


2.2 CENELEC Normas Europeias aprovadas na área eletrotécnica pelo Comité Europeu de Normalização Eletrotécnica (CENELEC) Para cada referência, menciona-se o Comité Técnico, a designação codificada e o título.

SC 9XC EN 50388:2012 ( Ed. 2 ) Railway Applications - Power supply and rolling stock - Technical criteria for the coordination between power supply (substation) and rolling stock to achieve interoperability SC 46XC EN 50288-8:2012 ( Ed. 1 ) Multi-element metallic cables used in analogue and digital communication and control Part 8: Specification for type 1 cables characterised up to 2 MHz SC 46XC EN 50441-1:2012 ( Ed. 2 ) Cables for indoor residential telecommunication installations Part 1: Unscreened cables - Grade 1 SC 46XC EN 50441-2:2012 ( Ed. 2 ) Cables for indoor residential telecommunication installations Part 2: Screened cables - Grade 1 SC 46XC EN 50441-4:2012 ( Ed. 1 ) Cables for indoor residential telecommunication installations Part 4: Cables up to 1 200MHz - Grade 3 SR 10 EN 60296:2012 ( Ed. 2 ) Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear (IEC 60296:2012) SR 15 EN 60819-1:2012 ( Ed. 2 ) Non-cellulosic papers for electrical purposes Part 1: Definitions and general requirements (IEC 60819-1:2009) SR 17D EN 61439-3:2012 ( Ed. 1 ) Low-voltage switchgear and controlgear assemblies Part 3: Distribution boards intended to be operated by ordinary persons (DBO) (IEC 61439-3:2012) SR 29 EN 60118-15:2012 ( Ed. 1 ) Electroacoustics - Hearing aids Part 15: Methods for characterising signal processing in hearing aids with a speech-like signal (IEC 60118-15:2012) SR 34A EN 62639:2012 ( Ed. 1 ) Fluorescent induction lamps - Performance requirements (IEC 62639:2012) SR 47E EN 60747-15:2012 ( Ed. 2 ) Semiconductor devices - Discrete devices Part 15: Isolated power semiconductor devices (IEC 60747-15:2010)

SR 47F EN 62047-13:2012 ( Ed. 1 ) Semiconductor devices - Micro-electromechanical devices Part 13: Bend- and shear- type test methods of measuring adhesive strength for MEMS structures (IEC 62047-13:2012) SR 47F EN 62047-14:2012 ( Ed. 1.0 ) Semiconductor devices - Micro-electromechanical devices Part 14: Forming limit measuring method of metallic film materials (IEC 62047-14:2012) SR 48D EN 60297-3-107:2012 ( Ed. 1 ) Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series Part 3-107: Dimensions of subracks and plug-in units, small form factor (IEC 60297-3-107:2012) SR 48B EN 60512-9-2:2012 ( Ed. 1 ) Connectors for electronic equipment - Tests and measurements Part 9-2: Endurance tests - Test 9b: Electrical load and temperature (IEC 60512-9-2:2011) SR 48B EN 60512-27-100:2012 ( Ed. 1 ) Connectors for electrical equipment - Tests and measurements Part 27-100: Signal integrity tests up to 500 MHz on IEC 60603-7 series connectors - Tests 27a to 27g (IEC 60512-27-100:2011) SR 48D EN 61587-1:2012 ( Ed. 3 ) Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 series Part 1: Environmental requirements, test set-up and safety aspects for cabinets, racks, subracks and chassis under indoor conditions (IEC 61587-1:2011) SR 65E EN 62264-5:2012 ( Ed. 1 ) Enterprise system integration Part 5: Business to manufacturing transactions (IEC 62264-5:2011) SR 65E EN 62337:2012 ( Ed. 2 ) Commissioning of electrical, instrumentation and control systems in the process industry - Specific phases and milestones (IEC 62337:2012) SR 65E EN 62381:2012 ( Ed. 2 ) Automation systems in the process industry - Factory Acceptance Test (FAT), Site Acceptance Test (SAT), and Site Integration Test (SIT) (IEC 62381:2012) SR 73 EN 60865-1:2012 ( Ed. 2 ) Short-circuit currents - Calculation of effects Part 1: Definitions



and calculation methods (IEC 60865-1:2011) SR 86C EN 61291-2:2012 ( Ed. 3 ) Optical amplifiers Part 2: Digital applications - Performance specification template (IEC 61291-2:2012) SR 86C EN 61291-4:2012 ( Ed. 3 ) Optical amplifiers Part 4: Multichannel applications - Performance specification template (IEC 61291-4:2011) SR 86C EN 62149-1:2012 ( Ed. 2 ) Fibre optic active components and devices - Performance standards Part 1: General and guidance (IEC 61753-059-2:201X + IEC 62149-1:2011 ) SR 100 EN 62595-1-2:2012 ( Ed. 1 ) LCD backlight unit Part 1-2: Terminology and letter symbols (IEC 62595-1-2:2011) SR 101 EN 61340-4-4:2012 ( Ed. 2 ) Electrostatics Part 4-4: Standard test methods for specific applications - Electrostatic classification of flexible intermediate bulk containers (FIBC) (IEC 61340-4-4:2012) SR 105 EN 62282-3-100:2012 ( Ed. 1 ) Fuel cell technologies Part 3-100: Stationary fuel cell power systems - Safety (IEC 62282-3-100:2012) SR 110 EN 61988-2-1:2012 ( Ed. 2 ) Plasma display panels Part 2-1: Measuring methods - Optical and optoelectrical (IEC 61988-2-1:2012) SR 110 EN 62341-6-2:2012 ( Ed. 1 ) Organic light emitting diode (OLED) displays Part 6-2: Measuring methods of visual quality and ambient performance (IEC 62341-6-2:2012) SR 112 EN 60544-5:2012 ( Ed. 2 ) Electrical insulating materials - Determination of the effects of ionising radiation Part 5: Procedures for assessment of ageing in service (IEC 60544-5:2011) TC 9X EN 50553:2012 ( Ed. 1 ) Railway applications - Requirements for running capability in case of fire on board of rolling stock TC 13 EN 62059-32-1:2012 ( Ed. 1 ) Electricity metering equipment - Dependability Part 32-1: Durability - Testing of the stability of metrological characteristics by applying elevated temperature (IEC 62059-32-1:2011) TC 17B EN 60947-3:2009 /A 1:2012 ( Ed. 3 ) Low-voltage switchgear and controlgear Part 3: Switches,

disconnectors, switch-disconnectors and fuse-combination units (IEC 60947-3:2008/A1:2012) TC 17B EN 61915-2:2012 ( Ed. 1 ) Low-voltage switchgear and controlgear - Device profiles for networked industrial devices Part 2: Root device profiles for starters and similar equipment (IEC 61915-2:2011) TC 22X EN 61800-3:2004 /A 1:2012 ( Ed. 2 ) Adjustable speed electrical power drive systems Part 3: EMC requirements and specific test methods (IEC 61800-3:2004/A1:2011) TC 23E EN 50550:2011 /CORRIGENDUM /AC/Mar:2012 ( Ed. 1 ) Power frequency overvoltage protective device for household and similar applications (POP) TC 23BX EN 60669-2-6:2012 ( Ed. 1 ) Switches for household and similar fixed electrical installations Part 2-6: Particular requirements - Fireman's switches for exterior and interior signs and luminaires (IEC 60669-2-6:2012, modif) TC 23E EN 61008-1:2004 /A 13:2012 ( Ed. 2 ) Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB's) Part 1: General rules TC 23E EN 61009-1:2004 /A 14:2012 ( Ed. 2 ) Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCCO's) Part 1: General rules TC 34Z EN 60061-1:1993 /A 47:2012 ( Ed. 1 ) Lamp caps and holders together with gauges for the control of interchangeability and safety Part 1: Lamp caps (IEC 60061-1:1969/A47:2011) TC 34Z EN 60061-2:1993 /A 44:2012 ( Ed. 1 ) Lamp caps and holders together with gauges for the control of interchangeability and safety Part 2: Lampholders (IEC 60061-2:1969/A44:2011) TC 34Z EN 60061-3:1993 /A 45:2012 ( Ed. 1 ) Lamp caps and holders together with gauges for the control of interchangeability and safety Part 3: Gauges (IEC 60061-3:1969/A45:2011) TC 34Z EN 60598-2-18:1994 /A 1:2012 ( Ed. 2 ) Luminaires Part 2: Particular requirements Section 18: Luminaires for swimming pools and similar applications (IEC 60598-2-18:1993/A1:2011) TC 34Z EN 61347-2-2:2012 ( Ed. 2 ) Lamp controlgear Part 2-2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps (IEC 61347-2-2:2011) TC 34Z EN 61347-2-7:2012 ( Ed. 3 ) Lamp controlgear Part 2-7: Particular requirements for battery supplied electronic controlgear for emergency lighting



(self-contained) (IEC 61347-2-7:2011) TC 40XA EN 60384-2:2012 ( Ed. 2 ) Fixed capacitors for use in electronic equipment Part 2: Sectional specification - Fixed metallized polyethylene terephthalate film dielectric d.c. capacitors (IEC 60384-2:2011) TC 40XA EN 60384-13:2012 ( Ed. 2 ) Fixed capacitors for use in electronic equipment Part 13: Sectional specification - Fixed polypropylene film dielectric metal foil d.c. capacitors (IEC 60384-13:2011) TC 40XA EN 60384-21:2012 ( Ed. 2 ) Fixed capacitors for use in electronic equipment Part 21: Sectional specificat - Fixed surface mount multilayer capacitors of ceramic dielectric, Class 1 (IEC 60384-21:2011) TC 40XA EN 60384-22:2012 ( Ed. 2 ) Fixed capacitors for use in electronic equipment Part 22: Sectional specification - Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2 (IEC 60384-22:2011) TC 61 EN 60335-2-14:2006 /A 11:2012 ( Ed. 4 ) Household and similar electrical appliances - Safety Part 2-14: Particular requirements for kitchen machines TC 61 EN 60335-2-15:2002 /A 11:2012 ( Ed. 3 ) Household and similar electrical appliances - Safety Part 2-15: Particular requirements for appliances for heating liquids TC 61 EN 60335-2-16:2003 /A 2:2012 ( Ed. 3 ) Household and similar electrical appliances - Safety Part 2-16: Particular requirements for food waste disposers (IEC 60335-2-16:2002/A2:2011) TC 61 EN 60335-2-25:2012 ( Ed. 5 ) Household and similar electrical appliances - Safety Part 2-25: Particular requirements for microwave ovens, including combination microwave ovens (IEC 60335-2-25:2010, modif) TC 61 EN 60335-2-30:2009 /A 11:2012 ( Ed. 4 ) Household and similar electrical appliances - Safety Part 2-30: Particular requirements for room heaters TC 61 EN 60335-2-36:2002 /A 11:2012 ( Ed. 4 ) Household and similar electrical appliances - Safety Part 2-36: Particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements TC 61 EN 60335-2-37:2002 /A 11:2012 ( Ed. 4 ) Household and similar electrical appliances - Safety Part 2-37: Particular requirements for commercial electric deep fat fryers TC 61 EN 60335-2-40:2003 /A 13:2012 ( Ed. 3 ) Household and similar electrical appliances - Safety Part 2-40: Particular requirements for electrical heat pumps, air-conditioners

and dehumidifiers TC 61 EN 60335-2-42:2003 /A 11:2012 ( Ed. 4 ) Household and similar electrical appliances - Safety Part 2-42: Particular requirements for commercial electric forced convection ovens, steam cookers and steam-convection ovens TC 61 EN 60335-2-44:2002 /A 2:2012 ( Ed. 3 ) Household and similar electrical appliances - Safety Part 2-44: Particular requirements for ironers (IEC 60335-2-44:2002/A2:2011) TC 61 EN 60335-2-45:2002 /A 2:2012 ( Ed. 3 ) Household and similar electrical appliances - Safety Part 2-45: Particular requirements for portable heating tools and similar appliances (IEC 60335-2-45:2002/A2:2011) TC 61 EN 60335-2-47:2003 /A 11:2012 ( Ed. 4 ) Household and similar electrical appliances - Safety Part 2-47: Particular requirements for commercial electric boiling pans TC 61 EN 60335-2-48:2003 /A 11:2012 ( Ed. 4 ) Household and similar electrical appliances - Safety Part 2-48: Particular requirements for commercial electric grillers and toasters TC 61 EN 60335-2-49:2003 /A 11:2012 ( Ed. 4 ) Household and similar electrical appliances - Safety Part 2-49: Particular requirements for commercial electric appliances for keeping food and crockery warm TC 61 EN 60335-2-51:2003 /A 2:2012 ( Ed. 3 ) Household and similar electrical appliances - Safety Part 2-51: Particular requirements for stationary circulation pumps for heating and service water installations (IEC 60335-2-51:2002/A2:2011) TC 61 EN 60335-2-66:2003 /A 2:2012 ( Ed. 2 ) Household and similar electrical appliances - Safety Part 2-66: Particular requirements for water-bed heaters (IEC 60335-2-66:2002/A2:2011) TC 61 EN 60335-2-81:2003 /A 2:2012 ( Ed. 2 ) Househould and similar electrical appliances - Safety Part 2-81: Particular requirements for foot warmers and heating mats (IEC 60335-2-81:2002/A2:2011) TC 62 EN 60731:2012 ( Ed. 2 ) Medical electrical equipment - Dosimeters with ionization chambers as used in radiotherapy (IEC 60731:2011) TC 62 EN 61217:2012 ( Ed. 2 ) Radiotherapy equipment - Coordinates, movements and scales (IEC 61217:2011) TC 64 HD 60364-7-710:2012 ( Ed. 1 ) Low-voltage electrical installations Part 7-710: Requirements for special installations or locations - Medical locations (IEC 60364-7-710:2002, modif)



TC 64 HD 60364-7-715:2012 ( Ed. 2 ) Low-voltage electrical installations Part 7-715: Requirements for special installations or locations - Extra-low-voltage lighting installations (IEC 60364-7-715:2011, modif) TC 64 HD 60364-7-722:2012 ( Ed. 1 ) Low voltage electrical installations Part 7-722: Requirements for special installations or locations - Supply of Electric vehicle TC 65CX EN 61784-5-2:2012 ( Ed. 2 ) Industrial communication networks - Profiles Part 5-2: Installation of fieldbuses - Installation profiles for CPF 2 (IEC 61784-5-2:2010) TC 65CX EN 61784-5-3:2012 ( Ed. 2 ) Industrial communication networks - Profiles Part 5-3: Installation of fieldbuses - Installation profiles for CPF 3 (IEC 61784-5-3:2010) TC 65X EN 61784-5-4:2012 ( Ed. 1 ) Industrial communication networks Profiles - Part 5-4: Installation of fieldbuses - Installation profiles for CPF 4 (IEC 61784-5-4:2010) TC 65X EN 61784-5-6:2012 ( Ed. 2 ) Industrial communication networks - Profiles Part 5-6: Installation of fieldbuses - Installation profiles for CPF 6 (IEC 61784-5-6:2010) TC 65CX EN 61784-5-10:2012 ( Ed. 2 ) Industrial communication networks - Profiles Part 5-10: Installation of fieldbuses - Installation profiles for CPF 10 (IEC 61784-5-10:2010) TC 65CX EN 61784-5-11:2012 ( Ed. 2 ) Industrial communication networks - Profiles Part 5-11: Installation of fieldbuses - Installation profiles for CPF 11 (IEC 61784-5-11:2010) TC 65X EN 61784-5-12:2012 ( Ed. 1 ) Industrial communication networks - Profiles Part 5-12: Installation of fieldbuses - Installation profiles for CPF 12 (IEC 61784-5-12:2010) TC 65X EN 61784-5-14:2012 ( Ed. 1 ) Industrial communication networks Profiles - Part 5-14: Installation of fieldbuses - Installation profiles for CPF 14 (IEC 61784-5-14:2010) TC 65X EN 61784-5-15:2012 ( Ed. 1 ) Industrial communication networks - Profiles Part 5-15: Installation of fieldbuses - Installation profiles for CPF 15 (IEC 61784-5-15:2010) TC 65CX EN 62439-4:2010 /A 1:2012 ( Ed. 1 ) Industrial communication networks - High availability automation networks Part 4: Cross-network Redundancy Protocol (CRP) (IEC 62439-4:2010/A1:2012)

TC 65CX EN 62439-7:2012 ( Ed. 1 ) Industrial communication networks - High availability automation networks Part 7: Ring-based Redundancy Protocol (RRP) (IEC 62439-7:2011) TC 79 CLC/TS 50131-2-8:2012 ( Ed. 1 ) Alarm systems - Intrusion and hold-up systems Part 2-8: Intrusion detectors - Shock detectors TC 81X EN 62561-7:2012 ( Ed. 1 ) Lightning Protection System Components (LPSC) Part 7: Requirements for earthing enhancing compounds (IEC 62561-7:2011, modif) TC 82 EN 61701:2012 ( Ed. 2 ) Salt mist corrosion testing of photovoltaic (PV) modules (IEC 61701:2011) TC 86A EN 60793-2:2012 ( Ed. 3 ) Optical fibres Part 2: Product specifications - General (IEC 60793-2:2011) TC 86BXA EN 60874-1:2012 ( Ed. 3 ) Fibre optic interconnecting devices and passive components - Connectors for optical fibres and cables Part 1: Generic specification (IEC 60874-1:2011) TC 86BXA EN 61274-1:2012 ( Ed. 3 ) Fibre optic interconnecting devices and passive components - Adaptors for fibre optic connectors Part 1: Generic specification (IEC 61274-1:2011) TC 86BXA EN 61300-3-39:2012 ( Ed. 2 ) Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 3-39: Examinations and measurements - Physical contact (PC) optical connector reference plug selection for return loss measurements (IEC 61300-3-39:2011) TC 86BXA EN 61314-1:2012 ( Ed. 4 ) Fibre optic interconnecting devices and passive components - Fibre optic fan-outs Part 1: Generic specification (IEC 61314-1:2011) TC 86BXA EN 61753-087-6:2012 ( Ed. 1 ) Fibre optic interconnecting devices and passive components - Performance standard Part 087-6: Non-connectorised single-mode bidirectional 1310 nm upstream and 1490 nm downstream WWDM devices for category O - Uncontrolled environment (IEC 61753-087-6:2012) TC 99X EN 61936-1:2010 /CORRIGENDUM /AC/Mar:2012 ( Ed. 1 ) Power installations exceeding 1 kV a.c Part 1: Common rules (IEC 61936-1:2010, modif) TC 106X EN 50360:2001 /A 1:2012 ( Ed. 1 ) Product standard to demonstrate the compliance of mobile phones with the basic restrictions related to human exposure to electromagnetic fields (300 MHz - 3 GHz)



TC 108X CLC/TS 62441:2012 ( Ed. 2 ) Safeguards against accidentally caused candle flame ignition for audio/video, communication and information technology equipment (IEC/TS 62441:2011) TC 205 EN 50491-4-1:2012 ( Ed. 1 ) General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) Part 4-1: General functional safety requirements for products intended to be integrated in Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) TC 206 EN 62087:2012 ( Ed. 3 ) Methods of measurement for the power consumption of audio, video and related equipment (IEC 62087:2011) TC 209 EN 50083-2:2012 ( Ed. 4 ) Cable networks for television signals, sound signals and interactive services Part 2: Electromagnetic compatibility for equipment TC 215 CLC/TR 50173-99-3:2012 ( Ed. 1 ) Information technology - Generic cabling systems Part 99-3: Home cabling infrastructures up to 50 m in length to support simultaneous and non simultaneous provision of applications TC 216 EN 50379-1:2012 ( Ed. 2 ) Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances Part 1: General requirements and test methods TC 216 EN 50379-2:2012 ( Ed. 2 ) Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances Part 2: Performance requirements for apparatus used in statutory inspections and assessement TC 216 EN 50379-3:2012 ( Ed. 2 ) Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances Part 3: Performance requirements for apparatus used in non-statutory servicing of gas fired heating appliances



2.3 CEN/CENELEC Normas Europeias aprovadas pelo Comité Europeu de Normalização (CEN) / Comité Europeu de Normalização Eletrotécnica (CENELEC) Para cada referência, menciona-se a designação codificada e o título.

TC 1 EN ISO/IEC 17020:2012 ( Ed. 2 ) Conformity assessment - Requirements for the operation of various types of bodies performing inspection (ISO/IEC 17020:2012) TC 3 EN ISO 13485:2012 ( Ed. 4 ) Medical devices - Quality management systems - Requirements for regulatory purposes (ISO 13485:2003)



2.4 ETSI Normas Europeias aprovadas e publicadas no setor das Telecomunicações pelo Instituto Europeu de Normalização para as Telecomunicações (ETSI) Para cada referência, menciona-se a designação codificada e o título.

TC ETSI EN 300132-3-0:2012 ( V2.1.1 ) Environmental Engineering (EE); Power supply interface at the input to telecommunications and datacom (ICT) equipment Part 3: Operated by rectified current source, alternating current source or direct current source up to 400 V Sub-part 0: Overview TC ETSI EN 300132-3-1:2012 ( V2.1.1 ) Environmental Engineering (EE); Power supply interface at the input to telecommunications and datacom (ICT) equipment Part 3: Operated by rectified current source, alternating current source or direct current source up to 400 V Sub-part 1: Direct current source up to 400 V TC ETSI EN 300392-9:2012 ( V1.5.1 ) Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D) Part 9: General requirements for supplementary services TC ETSI EN 300392-12-4:2012 ( V1.3.1 ) Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D) Part 12: Supplementary services stage 3 Sub-part 4: Call Forwarding (CF) TC ETSI EN 300392-12-13:2012 ( V1.2.1 ) Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D) Part 12: Supplementary services stage 3 Sub-part 13: Call Completion to Busy Subscriber (CCBS) TC ETSI EN 300392-12-14:2012 ( V1.2.1 ) Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D) Part 12: Supplementary services stage 3 Sub-part 14: Late Entry (LE) TC ETSI EN 300392-12-20:2012 ( V1.2.1 ) Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D) Part 12: Supplementary services stage 3 Sub-part 20: Discreet Listening (DL) TC ETSI EN 300392-12-21:2012 ( V1.5.1 ) Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D) Part 12: Supplementary services stage 3 Sub-part 21: Ambience Listening (AL) TC ETSI EN 300392-12-23:2012 ( V1.2.1 ) Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D) Part 12: Supplementary services stage 3 Sub-part 23: Call Completion on No Reply (CCNR) TC ETSI EN 301649:2012 ( V2.2.1 ) Digital Enhanced Cordless Telecommunications (DECT); DECT Packet Radio Service (DPRS)

TC ETSI EN 302288-1:2012 ( V1.6.1 ) Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices; Road Transport and Traffic Telematics (RTTT); Short range radar equipment operating in the 24 GHz range Part 1: Technical requirements and methods of measurement TC ETSI EN 302288-2:2012 ( V1.6.1 ) Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices; Road Transport and Traffic Telematics (RTTT); Short range radar equipment operating in the 24 GHz range Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive TC ETSI EN 302755:2012 ( V1.3.1 ) Digital Video Broadcasting (DVB); Frame structure channel coding and modulation for a second generation digital terrestrial television broadcasting system (DVB-T2) TC ETSI EN 302774:2012 ( V1.2.1 ) Broadband Wireless Access Systems (BWA) in the 3 400 MHz to 3 800 MHz frequency band; Base Stations; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive TC ETSI EN 303213-2:2012 ( V1.2.1 ) Advanced Surface Movement Guidance and Control System (A-SMGCS) Part 2: Community Specification for application under the Single European Sky Interoperability Regulation EC 552/2004 for A-SMGCS Level 2 including external interfaces TC ETSI EN 303214:2012 ( V1.2.1 ) Data Link Services (DLS) System; Community Specification for application under the Single European Sky Interoperability Regulation EC 552/2004; Requirements for ground constituents and system testing



3. Normas Internacionais publicadas Normas Internacionais aprovadas e publicadas pela Comissão Eletrotécnica Internacional (IEC) e pela Organização Internacional de Normalização (ISO)

Para cada referência, menciona-se o Comité Técnico, a designação codificada, a data e o título. IEC TC 17B IEC 60947-3:2008 /A 1:2012 ( Ed 3.0 ) Low-voltage switchgear and controlgear Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units TC 17D IEC 61439-3:2012 ( Ed 1 ) Low-voltage switchgear and controlgear assemblies Part 3: Distribution boards intended to be operated by ordinary persons (DBO) TC 17A IEC 62271-102:2001 ( Ed 1.0 ) High-voltage switchgear and controlgear Part 102: Alternating current disconnectors and earthing switches TC 23H IEC 60309-2:1999 /A 2:2012 ( Ed 4.0 ) Plugs, socket-outlets and couplers for industrial purposes Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories TC 23H IEC 60309-4:2006 /A 1:2012 ( Ed 1.0 ) Plugs, socket-outlets and couplers for industrial purposes Part 4: Switched socket-outlets and connectors with or without interlock TC 34B IEC 60061-1:1969 /A 47:2011 ( Ed 3.0 ) Lamp caps and holders together with gauges for the control of interchangeability and safety Part 1: Lamp caps TC 34B IEC 60061-2:1969 /A 44:2011 ( Ed 3.0 ) first supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety Part 2: Lampholders TC 34B IEC 60061-3:1969 /A 45:2011 ( Ed 3.0 ) Lamp caps and holders together with gauges for the control of interchangeability and safety Part 3: Gauges TC 34A IEC 60432-1:1999 ( Ed 2.0 ) Safety specifications for incandescent lamps Part 1: Tungsten filament lamps for domestic and similar general lighting purposes TC 34A IEC 60432-2:1999 /A 2:2012 ( Ed 2.0 ) Incandescent lamps - Safety specifications Part 2: Tungsten-halogen lamps for domestic and similar general lighting purposes TC 34D IEC 60598-2-13:2006 ( Ed 1.0 ) Luminaires Part 2-13: Particular requirements - Ground recessed luminaires TC 34D IEC 62034:2012 ( Ed 2.0 ) Automatic test systems for battery powered emergency escape lighting

TC 34A IEC 62639:2012 ( Ed 1.0 ) Fluorescent induction lamps - Performance requirements TC 34A IEC/TR 62750:2012 ( Ed 1.0 ) Unified fluorescent lamp dimming standard calculations TC 46A IEC 61196-8:2012 ( Ed 1.0 ) Coaxial communication cables Part 8: Sectional specification for semi-flexible cables with polytetrafluoroethylene (PTFE) dielectric TC 46A IEC 61196-8-1:2012 ( Ed 1.0 ) Coaxial communication cables Part 8-1: Blank detail specification for semi-flexible cables with polytetrafluoroethylene (PTFE) dielectric TC 47F IEC 62047-10:2011 /CORRIGENDUM Fev.:2012 ( Ed 1.0 Semiconductor devices - Micro-electromechanical devices Part 10: Micro-pillar compression test for MEMS materials TC 47F IEC 62047-13:2011 ( Ed 1.0 ) Semiconductor devices - Micro-electromechanical devices Part 13: Bend- and shear- type test methods of measuring adhesive strength for MEMS structures TC 47F IEC 62047-14:2012 ( Ed 1.0 ) Semiconductor devices - Micro-electromechanical devices Part 14: Forming limit measuring method of metallic film materials TC 48B IEC 60352-5:2012 ( Ed 4.0 ) Solderless connections Part 5: Press-in connections - General requirements, test methods and practical guidance TC 48B IEC 60512-1-100:2012 ( Ed 3.0 ) Connectors for electronic equipment - Tests and measurements Part 1-100 Ed 3.0: General - Applicable publications TC 59K IEC 60350-1:2011 /CORRIGENDUM Fev:2012 ( Ed 1.0 ) Household electric cooking appliances Part 1: Ranges, ovens, steam ovens and grills - Methods for measuring performance TC 59A IEC 60436:2004 /A 2:2012 ( Ed 3.0 ) Electric dishwashers for household use - Methods for measuring the performance TC 59D IEC 61121:2012 ( Ed 4.0 ) Tumble dryers for household use - Methods for measuring the performance



TC 61J IEC 60335-2-69:2012 ( Ed 4.0 ) Household and similar electrical appliances - Safety Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush, commercial use TC 61J IEC 60335-2-79:2012 ( Ed 3.0 ) Household an similar electrical appliances - Safety Part 2-79: Particular requirements for high pressure cleaners and steam cleaners TC 62D IEC 60601-2-19:2009 /CORRIGENDUM Fev:2012 ( Ed 2.0 Medical electrical equipment Part 2-19: Particular requirements for the basic safety and essential performance of infant incubators TC 62D IEC 60601-2-20:2009 /CORRIGENDUM Fev:2012 ( Ed 2.0 Medical electrical equipment Part 2-20: Particular requirements for basic safety and essencial performance of transport incubators TC 62D IEC 60601-2-47:2012 ( Ed 2.0 ) Medical electrical equipment Part 2-47: Particular requirements for the basic safety and essential performance of ambulatory electrocardiographic systems TC 62C IEC 60731:2011 ( Ed 3.0 ) Medical electrical equipment - Dosimeters with ionization chambers as used in radiotherapy TC 62D IEC 80601-2-60:2012 ( Ed 1.0 ) Medical electrical equipment Part 2-60: Particular requirements for basic safety and essential performance of dental equipment TC 65C IEC 61784-5-2:2010 ( Ed 2.0 ) Industrial communication networks - Profiles Part 5-2: Installation of fieldbuses - Installation profiles for CPF 2 TC 65C IEC 61784-5-3:2010 ( Ed 2.0 ) Industrial communication networks - Profiles Part 5-3: Installation of fieldbuses - Installation profiles for CPF 3 TC 65C IEC 61784-5-4:2010 ( Ed 1.0 ) Industrial communication networks - Profiles Part 5-4: Installation of fieldbuses - Installation profiles for CPF 4 TC 65C IEC 61784-5-6:2010 ( Ed 2.0 ) Industrial communication networks - Profiles Part 5-6: Installation of fieldbuses - Installation profiles for CPF 6 TC 65C IEC 61784-5-10:2010 ( Ed 2.0 ) Industrial communication networks - Profiles Part 5-10: Installation of fieldbuses - Installation profiles for CPF 10 TC 65C IEC 61784-5-11:2010 ( Ed 2.0 ) Industrial communication networks - Profiles Part 5-11: Installation of fieldbuses - Installation profiles for CPF 11 TC 65C IEC 61784-5-12:2010 ( Ed 1.0 ) Industrial communication networks - Profiles Part 5-12: Installation of fieldbuses - Installation profiles for CPF 12

TC 65C IEC 61784-5-14:2010 ( Ed 1.0 ) Industrial communication networks - Profiles Part 5-14: Installation of fieldbuses - Installation profiles for CPF 14 TC 65C IEC 61784-5-15:2010 ( Ed 1.0 ) Industrial communication networks - Profiles Part 5-15: Installation of fieldbuses - Installation profiles for CPF 15 TC 65E IEC 62337:2012 ( Ed 2.0 ) Commissioning of electrical, instrumentation and control systems in the process industry - Specific phases and milestones TC 65E IEC 62381:2012 ( Ed 2.0 ) Automation systems in the process industry - Factory Acceptance Test (FAT), Site Acceptance Test (SAT), and Site Integration Test (SIT) TC 65C IEC 62439-4:2010 /A 1:2012 ( Ed 1 ) Industrial communication networks - High availability automation networks Part 4: Cross-network Redundancy Protocol (CRP) TC 86B IEC 61300-3-33:2012 ( Ed 2.0 ) Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 3-33: Examinations and measurement - Withdrawal force from a resilient alignmemt sleeve using gauge pins TC 86B IEC 61753-087-6:2012 ( Ed 1 ) Fibre optic interconnecting devices and passive components - Performance standard Part 087-6: Non-connectorised single-mode bidirectional 1310 nm upstream and 1490 nm downstream WWDM devices for category O - Uncontrolled environment TC 86B IEC 61755-3-6:2006 /A 1:2012 ( Ed 1.0 ) Fibre optic connector optical interfaces Part 3-6: Optical interfac - 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-PC composite ferrule using Cu-Ni-alloy as fibre surrounding material, single mode fibre TC 2 IEC/TS 60034-27-2:2012 ( Ed 10 ) Rotating electrical machines Part 27-2: On-line partial discharge measurements on the stator winding insulation of rotating electrical machines TC 3 IEC 62023:2011 /CORRIGENDUM Fev.:2012 ( Ed 2.0 ) Structuring of technical information and documentation TC 10 IEC 60296:2012 ( Ed 4.0 ) Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear TC 10 IEC 61181:2007 /A 1:2012 ( Ed 2.0 ) Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment TC 20 IEC 60811-100:2012 ( Ed 1.0 ) Electric and optical fibre cables - Test methods for non-metallic materials Part 100: General



TC 20 IEC 60811-201:2012 ( Ed 1.0 ) Electric and optical fibre cables - Test methods for non-metallic materials Part 201: General tests - Measurement of insulation thickness TC 20 IEC 60811-202:2012 ( Ed 1.0 ) Electric and optical fibre cables - Test methods for non-metallic materials Part 202: General tests - Measurement of thickness of non-metallic sheaths TC 20 IEC 60811-203:2012 ( Ed 1.0 ) Electric and optical fibre cables - Test methods for non-metallic materials Part 203: General tests - Measurement of overall dimensions TC 20 IEC 60811-301:2012 ( Ed 1.0 ) Electric and optical fibre cables - Test methods for non-metallic materials Part 301: Electrical tests - Measurement of the permittivity at 23 °C of filling compounds TC 20 IEC 60811-302:2012 ( Ed 1.0 ) Electric and optical fibre cables - Test methods for non-metallic materials Part 302: Electrical tests - Measurement of the d.c. resistivity at 23 °C and 100 °C of filling compounds TC 20 IEC 60811-401:2012 ( Ed 1.0 ) Electric and optical fibre cables - Test methods for non-metallic materials Part 401: Miscellaneous tests - Thermal ageing methods. Ageing in an air oven TC 20 IEC 60811-402:2012 ( Ed 1.0 ) Electric and optical fibre cables - Test methods for non-metallic materials Part 402: Miscellaneous tests - Water absorption tests TC 20 IEC 60811-403:2012 ( Ed 1.0 ) Electric and optical fibre cables - Test methods for non-metallic materials Part 403: Miscellaneous tests - Ozone resistance test on crosslinked compounds TC 20 IEC 60811-404:2012 ( Ed 1.0 ) Electric and optical fibre cables - Test methods for non-metallic materials Part 404: Miscellaneous tests - Mineral oil immersion tests for sheaths made with crosslinked compounds TC 20 IEC 60811-405:2012 ( Ed 1.0 ) Electric and optical fibre cables - Test methods for non-metallic materials Part 405: Miscellaneous tests - Thermal stability test for PVC insulations and PVC sheaths TC 20 IEC 60811-407:2012 ( Ed 1.0 ) Electric and optical fibre cables - Test methods for non-metallic materials Part 407: Miscellaneous tests - Measurement of mass increase of polyethylene and polypropylene compounds TC 20 IEC 60811-408:2012 ( Ed 1.0 ) Electric and optical fibre cables - Test methods for non-metallic materials Part 408: Miscellaneous tests - Long-term stability test of polyethylene and polypropylene compounds TC 20 IEC 60811-409:2012 ( Ed 1.0 ) Electric and optical fibre cables - Test methods for non-metallic

materials Part 409: Miscellaneous tests - Loss of mass test for thermoplastic insulations and sheaths TC 20 IEC 60811-410:2012 ( Ed 1.0 ) Electric and optical fibre cables - Test methods for non-metallic materials Part 410: Miscellaneous tests - Test method for copper-catalysed oxidative degradation of polyolefin insulated conductors TC 20 IEC 60811-411:2012 ( Ed 1.0 ) Electric and optical fibre cables - Test methods for non-metallic materials Part 411: Miscellaneous tests - Low temperature brittleness of filling compounds TC 20 IEC 60811-412:2012 ( Ed 1.0 ) Electric and optical fibre cables - Test methods for non-metallic materials Part 412: Miscellaneous tests - Thermal ageing methods. Ageing in an air bomb TC 20 IEC 60811-501:2012 ( Ed 1.0 ) Electric and optical fibre cables - Test methods for non-metallic materials Part 501: Mechanical tests - Tests for determining the mechanical properties of insulating and sheathing compounds TC 20 IEC 60811-502:2012 ( Ed 1.0 ) Electric and optical fibre cables - Test methods for non-metallic materials Part 502: Mechanical tests - Shrinkage test for insulations TC 20 IEC 60811-503:2012 ( Ed 1.0 ) Electric and optical fibre cables - Test methods for non-metallic materials Part 503: Mechanical tests - Shrinkage test for sheaths TC 20 IEC 60811-504:2012 ( Ed 1.0 ) Electric and optical fibre cables - Test methods for non-metallic materials Part 504: Mechanical tests - Bending tests at low temperature for insulation and sheaths TC 20 IEC 60811-505:2012 ( Ed 1.0 ) Electric and optical fibre cables - Test methods for non-metallic materials Part 505: Mechanical tests - Elongation at low temperature for insulations and sheaths TC 20 IEC 60811-506:2012 ( Ed 1.0 ) Electric and optical fibre cables - Test methods for non-metallic materials Part 506: Mechanical tests - Impact test at low temperature for insulations and sheaths TC 20 IEC 60811-507:2012 ( Ed 1.0 ) Electric and optical fibre cables - Test methods for non-metallic materials Part 507: Mechanical tests - Hot set test for crosslinked materials TC 20 IEC 60811-508:2012 ( Ed 1.0 ) Electric and optical fibre cables - Test methods for non-metallic materials Part 508: Mechanical tests - Pressure test at high temperature for insulation and sheaths TC 20 IEC 60811-509:2012 ( Ed 1.0 ) Electric and optical fibre cables - Test methods for non-metallic materials Part 509: Mechanical tests - Tests for resistance of insulations and sheaths to cracking



TC 20 IEC 60811-510:2012 ( Ed 1.0 ) Electric and optical fibre cables - Test methods for non-metallic materials Part 510: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Wrapping test after thermal ageing in air TC 20 IEC 60811-511:2012 ( Ed 1.0 ) Electric and optical fibre cables - Test methods for non-metallic materials Part 511: Mechanical tests - Measurement of the melt flow index of polyethylene and polypropylene compounds TC 20 IEC 60811-512:2012 ( Ed 1.0 ) Electric and optical fibre cables - Test methods for non-metallic materials Part 512: Mechanical tests - Tensile strength and elongation at break after conditioning at elevated temperature; methods specific to polyethylene and polypropylene compounds TC 20 IEC 60811-513:2012 ( Ed 1.0 ) Electric and optical fibre cables - Test methods for non-metallic materials Part 513: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Wrapping test after conditioning TC 20 IEC 60811-601:2012 ( Ed 1.0 ) Electric and optical fibre cables - Test methods for non-metallic materials Part 601: Physical Tests - Measurement of the drop-point of filling compounds TC 20 IEC 60811-602:2012 ( Ed 1.0 ) Electric and optical fibre cables - Test methods for non-metallic materials Part 602: Physical Tests - Separation of oil in filling compounds TC 20 IEC 60811-603:2012 ( Ed 1.0 ) Electric and optical fibre cables - Test methods for non-metallic materials Part 603: Physical Tests - Measurement of total acid number of filling compounds TC 20 IEC 60811-604:2012 ( Ed 1.0 ) Electric and optical fibre cables - Test methods for non-metallic materials Part 604: Physical Tests - Measurement of absence of corrosive components in filling compounds TC 20 IEC 60811-605:2012 ( Ed 1.0 ) Electric and optical fibre cables - Test methods for non-metallic materials Part 605: Physical Tests - Measurement of carbon black and/or mineral filler in polyethylene compounds TC 21 IEC 61056-1:2012 ( Ed 3.0 ) General purpose lead-acid batteries (valve-regulated types) Part 1: General requirements, functional characteristics - Methods of test TC 21 IEC 61056-2:2012 ( Ed 3.0 ) General purpose lead-acid batteries (valve-regulated types) TC 22 IEC/TS 62578:2009 ( Ed 1.0 ) Power electronics systems and equipment - Operation conditions and characteristics of active infeed converter applications TC 29 IEC 60118-15:2012 ( Ed 1.0 ) Electroacoustics - Hearing aids Part 15: Methods for characterising

signal processing in hearing aids with a speech-like signal TC 29 IEC 60645-1:2012 ( Ed 3.0 ) Electroacoustics Part 1: Equipment for pure-tone audiometry TC 64 IEC 60364-7-709:2007 ( Ed 2.0 ) Low-voltage electrical installations Part 7-709: Requirements for special installations or locations - Marinas and similar locations TC 64 IEC 60364-7-709:2007 /A 1:2012 ( Ed 2.0 ) Low-voltage electrical installations Part 7-709: Requirements for special installations or locations - Marinas and similar locations TC 81 IEC 62561-1:2012 ( Ed 1.0 ) Lightning Protection System Components (LPSC) Part 1: Requirements for connection components TC 81 IEC 62561-2:2012 ( Ed 1.0 ) Lightning Protection System Components (LPSC) Part 2: Requirements for conductors and earth electrodes TC 81 IEC 62561-3:2012 ( Ed 1.0 ) Lightning Protection System Components (LPSC) Part 3: Requirements for isolating spark gaps TC 89 IEC 60695-2-13:2010 /CORRIGENDUM Fev:2012 ( Ed 2.0 Fire hazard testing Part 2-13: Glowing/hot-wire based test methods - Glow-wire ignition temperature (GWIT) test method for materials TC 105 IEC 62282-3-100:2012 ( Ed 1.0 ) Fuel cell technologies Part 3-100: Stationary fuel cell power systems - Safety TC 116 IEC 60335-2-107:2012 ( Ed 1.0 ) Household and similar electrical appliances - Safety Part 2-107 - Particular requirements for robotic battery powered electrical lawnmowers ISO TC 38 ISO 3758:2012 ( Ed 3 ) Textiles Care labelling code using symbols TC 39 ISO 23125:2010 /A 1:2012 ( Ed 1 ) Machine tools Safety Turning machines Amendment 1 TC 45 ISO 11193-1:2008 ( Ed 2 ) Single-use medical examination gloves Part 1: Specification for gloves made from rubber latex or rubber solution TC 58 ISO 10961:2010 ( Ed 2 ) Gas cylinders Cylinder bundles Design, manufacture, testing and inspection TC 58 ISO 15245-1:2001 ( Ed 1 ) Gas cylinders Parallel threads for connection of valves to gas



cylinders Part 1: Specification TC 61 ISO 179-2:1997 /A 1:2011 ( Ed 1 ) Plastics Determination of Charpy impact properties Part 2: Instrumented impact test AMENDMENT 1: Precision data TC 61 ISO 7214:2012 ( Ed 4 ) Cellular plastics Polyethylene Methods of test TC 67 ISO 19902:2007 ( Ed 1 ) Petroleum and natural gas industries Fixed steel offshore structures TC 84 ISO 11608-1:2012 ( Ed 2 ) Needle-based injection systems for medical use Requirements and test methods Part 1: Needle-based injection systems TC 84 ISO 11608-2:2012 ( Ed 2 ) Needle-based injection systems for medical use Requirements and test methods Part 2: Needles TC 106 ISO 21672-1:2012 ( Ed 1 ) Dentistry Periodontal probes Part 1: General requirements TC 121 ISO 8359:1996 ( Ed 2 ) Oxygen concentrators for medical use Safety requirements TC 131 ISO 10100:2001 ( Ed 2 ) Hydraulic fluid power Cylinders Acceptance tests TC 145 ISO 7001:2007 ( Ed 3 ) Graphical symbols Public information symbols TC 147 ISO 12846:2012 ( Ed 1 ) Water quality Determination of mercury Method using atomic absorption spectrometry (AAS) with and without enrichment TC 163 ISO 12570:2000 ( Ed 1 ) Hygrothermal performance of building materials and products Determination of moisture content by drying at elevated temperature TC 172 ISO 10110-12:2007 ( Ed 2 ) Optics and photonics Preparation of drawings for optical elements and systems Part 12: Aspheric surfaces TC 172 ISO 12870:2012 ( Ed 3 ) Ophthalmic optics Spectacle frames Requirements and test methods TC 172 ISO 19980:2012 ( Ed 2 ) Ophthalmic instruments Corneal topographers TC 176 ISO 10018:2012 ( Ed 1 ) Quality management Guidelines on people involvement and competence TC 198 ISO 13408-6:2005 ( Ed 1 ) Aseptic processing of health care products Part 6: Isolator systems

TC 211 ISO 19144-1:2009 ( Ed 1 ) Geographic information Classification systems Part 1: Classification system structure TC 213 ISO 25178-2:2012 ( Ed 1 ) Geometrical product specifications (GPS) Surface texture: Areal Part 2: Terms, definitions and surface texture parameters TC 217 ISO 11930:2012 ( Ed 1 ) Cosmetics Microbiology Evaluation of the antimicrobial protection of a cosmetic product

ISO/IEC TC CASCO ISO/IEC 17020:2012 ( Ed 2.0 ) Conformity assessment - Requirements for the operation of various types of bodies performing inspection



4. Projetos de normas portuguesas Os projetos de normas estão organizadas por Grupos classificativos, indicando-se a referência e o respetivo título.

4.1 Projetos em inquérito público Para cada referência menciona-se a designação codificada, o título e a correspondência europeia ou internacional, quando exista, e a data limite para a apresentação de comentários. E2000 / CTE 20 prNP 665:2012 Preço: 0,00 EUR Sistema de designação de cabos elétricos isolados Data de Início do Inquerito: 2012-05-16 Data de Fim do Inquerito: 2012-06-15 A240 / CTA 24 prNP 4511:2012 Preço: 0,00 EUR Entidades prestadoras de serviços externos em higiene e segurança alimentar Regras específicas de funcionamento Data de Início do Inquerito: 2012-04-17 Data de Fim do Inquerito: 2012-05-17 A250 / CTA 25 prNP 4512:2012 Preço: 0,00 EUR Sistema de gestão da formação profissional, incluindo a aprendizagem enriquecida por tecnologia Requisitos Data de Início do Inquerito: 2012-04-17 Data de Fim do Inquerito: 2012-05-17 C460 / CT 46 prNP 4513:2012 Preço: 0,00 EUR Segurança contra incêndios Requisitos do serviço de comercialização, instalação e manutenção de produtos, equipamentos e sistemas de segurança contra incêndio Data de Início do Inquerito: 2012-05-16 Data de Fim do Inquerito: 2012-06-15 C1780 / CT 178 prNP 1037-3-1:2012 Preço: 0,00 EUR Ventilação dos edifícios com aparelhos a gás Parte 3-1: Edificios de habitação. Instalação dos aparelhos a gás; volume dos locais; posicionamento dos aparelhos e suas ligações aos vários sistemas de alimentação; ligações ao sistema de ventilação Data de Início do Inquerito: 2012-05-16 Data de Fim do Inquerito: 2012-06-15



4.2 Projetos anulados Para cada referência menciona-se a designação, a correspondência europeia e/ou internacional, bem como o documento que o substitui, quando exista.

LISTA VAZIA



5. Projetos de normas e propostas de estudo de novas normas do Comité Europeu de Normalização(CEN e do Comité Europeu para a Normalização do Ferro e do Aço (ECISS) Os projetos de normas e as propostas de estudo de novas normas estão organizadas por "Comités" Técnicos do CEN e do ECISS. 5.1 Projetos em inquérito público

Para cada referência menciona-se a designação codificada, o título e a data limite para a apresentação de comentários.

prCEN/TS 15937:2012 Sludge, treated biowaste and soil Determination of specific electrical conductivity Data Limite: 2012-06-15 prCEN/TS 16170:2012 Sludge, treated biowaste and soil Determination of elements using inductively coupled plasma optical emission spectrometry (ICP-OES) Data Limite: 2012-06-15 prCEN/TS 16171:2012 Sludge, treated biowaste and soil Determination of elements using inductively coupled plasma mass spectrometry (ICP-MS) Data Limite: 2012-06-15 prCEN/TS 16172:2012 Sludge, treated biowaste and soil Determination of elements using graphite furnace atomic absorption spectrometry (GF-AAS) Data Limite: 2012-05-15 prCEN/TS 16175-1:2012 Sludge, treated biowaste and soil Determination of mercury in aqua regia and nitric acid digests Part 1: Cold vapour atomic absorption spectrometry (CVAAS) Data Limite: 2012-05-15 prCEN/TS 16175-2:2012 Sludge, treated biowaste and soil Determination of mercury Part 2: Cold vapour atomic fluorescence spectrometry (CV-AFS) Data Limite: 2012-06-22 prCEN/TS 16181:2012 Sludge, treated biowaste and soil Determination of polycyclic aromatic hydrocarbons (PAH) by gas chromatography (GC) and high performance liquid chromatography (HPLC) Data Limite: 2012-06-15 prEN 330:2012 Wood preservatives Determination of the relative protective effectiveness of a wood preservative for use under a coating and exposed out-of-ground contact Field test: L-joint method Data Limite: 2012-06-19 prEN 13182-2:2012 Buoyant aids for swimming instruction Part 2: Safety requirements and test methods for buoyant aids to be held Data Limite: 2012-08-15

prEN 16179:2012 Sludge, treated biowaste and soil Guidance for sample pretreatment Data Limite: 2012-05-22 prEN 16212:2012 Energy Efficiency and Savings Calculation, Top-down and Bottom-up Methods Data Limite: 2012-06-12 prEN 16231:2012 Energy efficiency benchmarking methodology Data Limite: 2012-06-26 prEN 16247-1:2012 Energy audits Part 1: General requirements Data Limite: 2012-05-15 prEN 16372:2011 Aesthetic surgery services Data Limite: 2012-05-22 prEN ISO 17024:2012 Conformity assessment General requirements for bodies operating certification of persons (ISO/IEC/FDIS 17024:2012) Data Limite: 2012-05-01 TC 10 EN 81-21:2009 /prA 1:2012 Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods Part 21: New passenger and goods passenger lifts in existing builiding Data Limite: 2012-06-15 TC 10 prEN 81-82:2012 Safety rules for the construction and installation of lifts Existing lifts Part 82: Rules for the improvement of the accessibility of existing lifts for persons including persons with disability Data Limite: 2012-07-09 TC 10 prEN 12015:2012 Electromagnetic compatibility Product family standard for lifts, escalators ans moving walks Emission Data Limite: 2012-08-15 TC 10 prEN 12159:2012 Builders hoists for persons and materials with vertically guided cages Data Limite: 2012-08-08



TC 12 prEN ISO 13628-6:2012 Petroleum and natural gas industries Design and operation of subsea production systems Part 6: Subsea production control systems (ISO/DIS 13628-6:2012) Data Limite: 2012-06-12 TC 12 EN ISO 19902:2007 /prA 1:2012 Petroleum and natural gas industries Fixed steel offshore structures (ISO 19902:2007/DAM 1:2012) Data Limite: 2012-09-12 TC 12 prEN ISO 19905-1:2012 Petroleum and natural gas industries Site-specific assessment of mobile offshore units Part 1: Jack-ups (ISO/FDIS 19905-1:2012) Data Limite: 2012-05-15 TC 12 prEN ISO 28300:2011 Petroleum, petrochemical and natural gas industries Venting of atmospheric and low-pressure storage tanks (ISO/DIS 28300:2011) Data Limite: 2012-05-22 TC 19 prCEN/TR 16389:2012 Automotive fuels Paraffinic diesel fuel and blends Background to the parameters required and their respective limits and determination Data Limite: 2012-06-08 TC 19 prCEN/TS 15940:2012 Automotive fuels Paraffinic diesel fuel from synthesis or hydrotreatment Requirements and test methods Data Limite: 2012-06-08 TC 19 prEN 14214:2012 Liquid petroleum products Fatty acid methyl esters (FAME) for use in diesel engines and heating applications - Requirements and test methods Data Limite: 2012-06-19 TC 19 prEN 15721:2012 Ethanol as a blending component for petrol Determination of higher alcohols, methanol and volatile impurities Gas chromatographic method Data Limite: 2012-08-22 TC 19 prEN 16270:2012 Automotive fuels Determination of high-boiling components including fatty acid methyl esters in petrol Gas chromatographic method Data Limite: 2012-06-26 TC 19 prEN 16300:2012 Automotive fuels Determination of iodine value in fatty acid methyl esters (FAME) Calculation method from gas chromatographic data Data Limite: 2012-06-26 TC 19 prEN 16423:2012 Liquefied petroleum gases Determination of dissolved residue Gas chromatographic method using liquid,

oncolumn injection Data Limite: 2012-09-12 TC 19 EN ISO 4264:2007 /prA 1:2011 Petroleum products Calculation of cetane index of middle-distillate fuels by the four-variable equation (ISO 4264:2007/DAM 1:2011) Data Limite: 2012-05-08 TC 19 prEN ISO 4404-1:2012 Petroleum and related products Determination of the corrosion resistance of fire-resistant hydraulic fluids Part 1: Water-containing fluids (ISO/FDIS 4404-1:2012) Data Limite: 2012-06-12 TC 19 prEN ISO 5163:2012 Petroleum products Determination of knock characteristics of motor and aviation fuels Motor method (ISO/DIS 5163:2012) Data Limite: 2012-10-10 TC 19 prEN ISO 5164:2012 Petroleum products Determination of knock characteristics of motor fuels Research method (ISO/DIS 5164:2012) Data Limite: 2012-10-10 TC 23 prEN ISO 3807:2012 Gas cylinders Acetylene cylinders Basic requirements and type testing (ISO/DIS 3807:2012) Data Limite: 2012-09-05 TC 23 prEN ISO 7866:2012 Gas cylinders Refillable seamless aluminium alloy gas cylinders Design, construction and testing (ISO/FDIS 7866:2012) Data Limite: 2012-07-03 TC 23 prEN ISO 10462:2012 Gas cylinders Acetylene cylinders Periodic inspection and maintenance (ISO/DIS 10462:2012) Data Limite: 2012-10-10 TC 23 prEN ISO 11120:2012 Gas cylinders Refillable seamless steel tubes of water capacity between 150 l and 3000 l Design construction and testing (ISO/FDIS 11120:2012) Data Limite: 2012-07-03 TC 23 prEN ISO 11439:2012 Gas cylinders High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles (ISO/DIS 11439:2012) Data Limite: 2012-05-29 TC 23 prEN 12209:2012 Gas cylinders Outlet connections for gas cylinder valves for compressed breathable air (ISO/DIS 12209:2012) Data Limite: 2012-07-23



TC 23 prEN ISO 13088:2012 Gas cylinders Acetylene cylinder bundles Filling conditions and filling inspection (ISO 13088:2011) Data Limite: 2012-09-05 TC 23 prEN ISO 14246:2012 Gas cylinders Cylinder valves Manufacturing tests and examinations (ISO/FDIS 14246:2012) Data Limite: 2012-07-03 TC 23 EN ISO 15245-1:2001 /prA 1:2012 Gas cylinders Parallel threads for connection of valves to gas cylinders Part 1: Specification (ISO 15245-1:2001/DAM 1:2012) Data Limite: 2012-09-19 TC 33 prEN 12320:2012 Building hardware Padlocks and padlock fittings Requirements and test methods Data Limite: 2012-07-10 TC 33 EN 13120:2009 /prA 1:2012 Internal blinds Performance requirements including safety Data Limite: 2012-09-12 TC 33 prEN 15684:2012 Building hardware Mechatronic cylinders Requirements and test methods Data Limite: 2012-08-22 TC 33 prEN 16005:2012 Power operated pedestrian doorsets Safety in use Requirements and test methods Data Limite: 2012-07-10 TC 33 prEN 16433:2012 Internal blinds Protection from strangulation hazards Test methods Data Limite: 2012-09-12 TC 33 prEN 16434:2012 Internal blinds Protection from strangulation hazards Requirements and Test methods for safety devices Data Limite: 2012-09-12 TC 38 prCEN/TR 15003:2012 Durability of wood and wood-based products Criteria for hot air processes for curative uses against wood destroying organisms Data Limite: 2012-07-12 TC 38 prCEN/TR 16420:2012 Analytical Method fot the Analysis of Propiconazole in treated Wood Samples Data Limite: 2012-07-26 TC 38 prCEN/TS 15119-2:2012 Durability of wood and wood-based products

Determination of emissions from preservative treated wood to the environment Part 2: Wooden commodities exposed in Use Class 4 or 5 (in contact with the ground, fresh water or sea water) - Laboratory method Data Limite: 2012-06-29 TC 38 prEN 73:2012 Wood preservatives Accelerated ageing of treated wook prior to biological testing Evaporative ageing procedure Data Limite: 2012-06-19 TC 38 prEN 117:2012 Wood preservatives Determination of toxic values against Reticulitermes species (European termites) (Laboratory method Data Limite: 2012-07-23 TC 38 prEN 252:2012 Field test method for determining the relative protective effectiveness of a wood preservative in ground contact Data Limite: 2012-08-08 TC 47 prEN 267:2012 Forced draught burners for liquid fuels Data Limite: 2012-08-08 TC 48 prEN 26:2012 Gas-fired instantaneous water heaters for the production of domestic hot water Data Limite: 2012-07-23 TC 48 prEN 89:2012 Gas-fired storage water heaters for the production of domestic hot water Data Limite: 2012-07-23 TC 51 prEN 197-2:2012 Cement Part 2: Conformity evaluation Data Limite: 2012-06-12 TC 51 prEN 13282-2:2012 Hydraulic road binders Part 2: Normal hardening hydraulic road binders - Composition, specifications and conformity criteria Data Limite: 2012-07-16 TC 52 prCEN/TR 15371:2012 Safety of toys Replies to requests for interpretation of EN 71-1, EN 71-2, and EN 71-8 Data Limite: 2012-07-12 TC 52 EN 71-1:2011 /prA 2:2012 Safety of toys Part 1: Mechanical and physical properties Amendment 2: Acoustics Data Limite: 2012-08-22 TC 52 prEN 71-3:2012 Safety of toys Part 3: Migration of certain elements Data Limite: 2012-09-19 TC 52 prEN 71-5:2012 Safety of toys Part 5: Chemical toys (sets) other than



experimental sets Data Limite: 2012-08-15 TC 52 prEN 71-12:2012 Safety of toys Part 12: N-nitrosamines and N-nitrosatable substances Data Limite: 2012-09-19 TC 52 prEN 71-13:2012 Safety of toys Part 13: Olfactory board games, gustative board games, cosmetic kits and gustative kits Data Limite: 2012-09-19 TC 53 prEN 12811-4:2012 Temporary works equipment Part 4: Protection fans for scaffolds - Performance requirements and product design Data Limite: 2012-08-08 TC 54 prCEN/TR 764-6:2012 Pressure equipment Part 6: Structure and content of operating instructions Data Limite: 2012-06-22 TC 54 EN 13445-3:2009 /prA 5:2012 Unfired pressure vessels Part 3: Design Data Limite: 2012-08-15 TC 54 EN 13445-4:2009 /prA 2:2012 Unfired pressure vessels Part 4: Fabrication Data Limite: 2012-08-15 TC 54 prEN 13445-5:2011 Unfired pressure vessels Part 5: Inspection and testing Data Limite: 2012-05-08 TC 55 prCEN/TR 16386:2012 Dentistry Guidelines for handling methacrylate-based materials in the dental laboratory Data Limite: 2012-05-09 TC 55 prEN ISO 6876:2012 Dentistry Root canal sealing materials (ISO/FDIS 6876:2012) Data Limite: 2012-05-15 TC 55 EN ISO 7405:2008 /prA 1:2012 Dentistry Evaluation of biocompatibility of medical devices used in dentistry Amendment 1 (ISO 7405:2008/DAM 1:2012) Data Limite: 2012-06-19 TC 55 prEN ISO 13017:2012 Dentistry Magnetic attachments (ISO/FDIS 13017:2012) Data Limite: 2012-06-26 TC 55 prEN ISO 13504:2012 Dentistry General requirements for instruments and related accessories used in dental implant placement and treatment (ISO/FDIS 13504:2012) Data Limite: 2012-06-26

TC 55 prEN ISO 16498:2012 Dentistry Minimal dental implant data set for clinical use (ISO/DIS 16498:2012) Data Limite: 2012-09-19 TC 55 prEN ISO 29022:2012 Dentistry Adhesion Notched-edge shear bond strength test (ISO/DIS 29022:2012) Data Limite: 2012-08-22 TC 58 EN 161:2011 /prA 2:2012 Automatic shut-off valves for gas burners and gas appliances Data Limite: 2012-05-09 TC 67 prEN 14411:2012 Ceramic tiles Definitions, classification, characteristics, evaluation of conformity and marking Data Limite: 2012-07-09 TC 72 prEN 54-2:2012 Fire detection and fire alarm systems Part 2: Control and indicating equipment Data Limite: 2012-07-02 TC 72 prEN 54-10:2012 Fire detection and fire alarm systems Part 10: Flame detectors - Point detectors Data Limite: 2012-06-12 TC 72 prEN 54-31:2012 Fire detection and fire alarm system Part 31: Multi-sensor fire detectors - Point detectors using a combination of smoke, carbon monoxide and optionally heat sensors Data Limite: 2012-08-15 TC 72 prEN 14604:2012 Smoke alarm devices Data Limite: 2012-07-02 TC 74 prEN 1591-1:2012 Flanges and their joints Design rules for gasketed circular flange connections Part 1: Calculation Data Limite: 2012-06-19 TC 74 prEN 12560-2:2012 Flanges and their joints Dimensions of gaskets for Class-designated flanges Part 2: Spiral wound gaskets for use with steel flanges Data Limite: 2012-06-19 TC 75 prEN ISO 75-2:2011 Plastics Determination of temperature of deflection under load Part 2: Plastics and ebonite (ISO/DIS 75-2:2011) Data Limite: 2012-05-22



TC 88 prEN 13469:2012 Thermal insulating products for building equipment and industrial installations Determination of water vapour transmission properties of preformed pipe insulation Data Limite: 2012-07-23 TC 88 prEN 13472:2012 Thermal insulating products for building equipment and industrial installations Determination of short term water absorption by partial immersion of preformed pipe insulation Data Limite: 2012-07-23 TC 88 prEN 13496:2012 Thermal insulation products for building applications Determination of the mechanical properties of glass fibre meshes Data Limite: 2012-07-02 TC 88 prEN 14706:2012 Thermal insulating products for building equipment and industrial installations Determination of maximum service temperature Data Limite: 2012-07-23 TC 88 prEN 14707:2012 Thermal insulating products for building equipment and industrial installations Determination of maximum service temperature for preformed pipe insulation Data Limite: 2012-07-23 TC 88 prEN 15732:2012 Light weight fill and thermal insulation products for civil engineering applications (CEA) Expanded clay lightweight aggregate products (LWA) Data Limite: 2012-08-08 TC 88 prEN 16382:2012 Thermal insulation products for building applications Determination of the pull-through resistance of anchors through thermal insulation products Data Limite: 2012-07-02 TC 88 prEN 16383:2012 Thermal insulating products for building applications Determination of the hygrothermal behaviour of external thermal insulation composite systems with renders (ETICS) Data Limite: 2012-07-02 TC 89 EN ISO 12570:2000 /prA 1:2012 Hygrothermal performance of building materials and products Determination of moisture content by drying at elevated temperature Amendment 1 (ISO 12570:2000/DAM 1:2012) Data Limite: 2012-08-29 TC 89 prEN ISO 12571:2012 Hygrothermal performance of building materials and products Determination of hygroscopic sorption properties (ISO/DIS 12571:2012) Data Limite: 2012-09-05

TC 92 prEN ISO 4064-3:2012 Water meters intended for the metering of cold potable water and hot water Part 3: Test report format (ISO/DIS 4064-3:2012) Data Limite: 2012-10-03 TC 92 prEN ISO 4064-4:2012 Water meters intended for the metering of cold potable water and hot water Part 4: Non-metrological requirements not covered in ISO 4064-1 (ISO/DIS 4064-4:2012) Data Limite: 2012-10-03 TC 92 prEN ISO 4064-5:2012 Water meters intended for the metering of cold potable water and hot water Part 5: Installation requirements (ISO/DIS 4064-5:2012) Data Limite: 2012-10-03 TC 102 EN ISO 15883-1:2009 /prA 1:2012 Washer-disinfectors Part 1: General requirements, terms and definitions and tests (ISO 15883-1:2006/DAM 1:2012) Data Limite: 2012-10-03 TC 104 prEN 206:2012 Concrete Specification, performance, production and conformity Data Limite: 2012-08-15 TC 104 prEN 450-1:2012 Fly ash for concrete Part 1: Definition, specifications and conformity criteria Data Limite: 2012-06-05 TC 104 prEN 12390-1:2012 Testing hardened concrete Part 1: Shape, dimensions and other requirements for specimens and moulds Data Limite: 2012-06-12 TC 104 prEN 12390-13:2012 Testing hardened concrete Part 13: Determination of secant modulus of elasticity in compression Data Limite: 2012-08-29 TC 104 prEN 12504-2:2012 Testing concrete in structures Part 2: Non-destructive testing - Determination of rebound number Data Limite: 2012-06-12 TC 106 prEN 203-1:2012 Gas heated catering equipment Part 1: General safety rules Data Limite: 2012-09-05 TC 106 prEN 203-2-7:2012 Gas heated catering equipment Part 2-7: Specific requirements - Salamanders and rotisseries Data Limite: 2012-09-05 TC 112 prEN 636:2012 Plywood Specifications



Data Limite: 2012-07-10 TC 112 prEN 12871:2011 Wood-based panels Determination of performance characteristics for load bearing panels for use in floors, roofs and walls Data Limite: 2012-05-08 TC 112 prEN 16368:2011 Lightweight Particleboards Specifications Data Limite: 2012-05-15 TC 113 prEN 12900:2012 Refrigerant compressors Rating conditions, tolerances and presentation of manufacturer's performance data Data Limite: 2012-08-15 TC 114 prEN ISO 13856-3:2012 Safety of machinery Pressure-sensitive protective devices Part 3: General principles for the design and testing of pressure-sensitive bumpers, plates, wires and similar devices (ISO/DIS 13856-3:2012) Data Limite: 2012-08-15 TC 121 EN ISO 5172:2006 /prA 1:2012 Gas welding equipment Blowpipes for gas welding, heating and cutting Specifications and tests (ISO 5172:2006/FDAM 1:2012) Data Limite: 2012-06-26 TC 121 prEN ISO 5817:2012 Welding Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) Quality levels for imperfections (ISO/DIS 5817:2012) Data Limite: 2012-10-10 TC 121 prEN ISO 14732:2012 Welding personnel Qualification testing of welding operators for fully mechanized welding and weld setters for fully mechanized welding and automatic welding of metallic materials (ISO/DIS 14732:2012) Data Limite: 2012-05-22 TC 121 prEN ISO 15614-13:2012 Specification and qualification of welding procedures for metallic materials Welding procedure test Part 13: Upset (resistance butt) and flash welding (ISO/FDIS 15614-13:2012) Data Limite: 2012-05-29 TC 121 prEN ISO 15615:2012 Gas welding equipment Acetylene manifold systems for welding, cutting and allied processes Safety requirements in high-pressure devices (ISO/DIS 15615:2012) Data Limite: 2012-05-15 TC 122 EN ISO 9241-410:2008 /prA 1:2012 Ergonomics of human-system interaction Part 410: Design criteria for physical input devices (ISO 9241-410:2008/FDAM 1:2012)

Data Limite: 2012-05-22 TC 123 prEN ISO 19900:2012 Petroleum and natural gas industries General requirements for offshore structures (ISO/DIS 19900:2012) Data Limite: 2012-10-03 TC 124 prEN 336:2012 Structural timber Sizes, permitted deviations Data Limite: 2012-08-15 TC 124 EN 408:2010 /prA 1:2011 Timber structures Structural timber and glued laminated timber Determination of some physical and mechanical properties. Data Limite: 2012-05-15 TC 126 prEN ISO 16251-1:2012 Acoustics Laboratory measurement of the reduction of transmitted impact noise by floor coverings on a small floor mock-up Part 1: Heavyweight compact floor (ISO/DIS 16251-1:2012) Data Limite: 2012-10-03 TC 126 prEN ISO 16283-1:2012 Acoustics Field measurement of sound insulation in buildings and of building elements Part 1: Airborne sound insulation (ISO/DIS 16283-1:2012) Data Limite: 2012-09-12 TC 127 prEN 1363-1:2011 Fire resistance tests Part 1: General Requirements Data Limite: 2012-05-08 TC 127 prEN 1365-1:2012 Fire resistance tests for loadbearing elements Part 1: Walls Data Limite: 2012-06-12 TC 127 prEN 13381-2:2012 Test methods for determining the contribution to the fire resistance of structural members Part 2: Vertical protective membranes Data Limite: 2012-09-19 TC 127 prEN 13381-3:2012 Test methods for determining the contribution to the fire resistance of structural members Part 3: applied protection to concrete members Data Limite: 2012-10-03 TC 127 prEN 13381-5:2011 Test methods for determining the contribution to the fire resistance of structural members Part 5: Applied protection to concrete/profiled sheet steel composite members Data Limite: 2012-05-22 TC 127 prEN 15269-2:2012 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable



window assemblies, including their elements of building hardware - Part 2: Fire resistance of hinged and pivoted steel doorsets Data Limite: 2012-06-19 TC 127 prEN 15269-3:2011 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware Part 3: Fire resistance of hinged and pivoted timber doorsets and openable timber framed windows Data Limite: 2012-05-15 TC 127 prEN 15269-5:2012 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assesmblies, including their elements of building hardware Part 5: Fire resistance of hinged and pivoted metal framed glazed doorsets and openable windows Data Limite: 2012-09-26 TC 128 prEN 492:2012 Fibre-cement slates and fittings Product specification and test methods Data Limite: 2012-07-03 TC 128 prEN 494:2012 Fibre-cement profiled sheets and fittings Product specification and test methods Data Limite: 2012-07-10 TC 128 prEN 1013:2012 Light transmitting single skin profiled plastics sheets for internal and external roofs, walls and ceilings Requirements and test methods Data Limite: 2012-09-19 TC 128 prEN 12467:2012 Fibre-cement flat sheets Product specification and test methods Data Limite: 2012-07-03 TC 129 prEN 1096-4:2012 Glass in building Coated glass Part 4: Evaluation of conformity / Product standard Data Limite: 2012-06-19 TC 129 prEN 12150-1:2012 Glass in building Thermally toughened soda lime silicate safety glass Part 1: Definition and description Data Limite: 2012-06-12 TC 130 prEN 16430-1:2012 Fan assisted radiators, convectors and trench convectors Part 1: Technical specifications and requirements Data Limite: 2012-09-26 TC 130 prEN 16430-2:2012 Fan assisted radiators, convectors and trench convectors Part 2: Test method and rating for thermal output Data Limite: 2012-09-26

TC 130 prEN 16430-3:2012 Fan assisted radiators, convectors and trench convectors Part 3: Test method and rating for cooling capacity Data Limite: 2012-09-26 TC 131 prEN 676:2012 Forced draught burners for gaseous fuels Data Limite: 2012-08-08 TC 133 prEN 1254-6:2012 Copper and copper alloys Plumbing fittings Part 6: Fittings with push-fit ends Data Limite: 2012-07-10 TC 133 prEN 1254-8:2012 Copper and copper alloys Plumbing fittings Part 8: Fittings with press ends for use with plastics and multilayer pipes Data Limite: 2012-07-10 TC 133 prEN 12450:2012 Copper and copper alloys Seamless, round copper capillary tubes Data Limite: 2012-09-05 TC 134 prEN 650:2012 Resilient floor coverings Polyvinyl chloride floor coverings on jute backing or on polyester felt backing or on a polyester felt with a polyvinyl chloride backing Specification Data Limite: 2012-07-09 TC 134 prEN 14215:2012 Textile floor coverings Classification of machine-made pile rugs and runners Data Limite: 2012-08-08 TC 136 prCEN/TR 16396:2012 Playground equipment for children Replies to requests for interpretation of EN 1176:2008 and its parts Data Limite: 2012-06-29 TC 136 prEN 892:2012 Mountaineering equipment Dynamic mountaineering ropes Safety requirements and test methods Data Limite: 2012-06-12 TC 136 prEN 926-2:2012 Paragliding equipment Paragliders Part 2: Requirements and test methods for classifying flight safety characteristics Data Limite: 2012-07-09 TC 136 prEN 15151-1:2012 Mountaineering equipment Braking devices Part 1: Braking devices with manually assisted locking, safety requirements and test methods Data Limite: 2012-05-29 TC 136 prEN 15151-2:2012 Mountaineering equipment Braking devices Part 2: Manual braking devices, safety requirements and test



methods Data Limite: 2012-05-29 TC 136 prEN ISO 20957-1:2012 Stationary training equipment Part 1: General safety requirements and test methods (ISO/DIS 20957-1:2012) Data Limite: 2012-07-09 TC 137 prCEN/TR 16013-3:2012 Workplace exposure Guide for the use of direct-reading instruments for aerosol monitoring Part 3: Evaluation of airborne particle concentrations using photometers Data Limite: 2012-05-09 TC 137 prEN ISO 13137:2012 Workplace atmospheres Pumps for personal sampling of chemical and biological agents Requirements and test methods (ISO/DIS 13137:2012) Data Limite: 2012-08-08 TC 138 prEN 16392-2:2012 Non Destructive Testing Characterisation and verification of ultrasonic phased array systems Part 2: Probes Data Limite: 2012-08-08 TC 138 prEN 16407-1:2012 Non-destructive testing Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays Part 1: Tangential radiographic inspection Data Limite: 2012-08-15 TC 138 prEN 16407-2:2012 Non-destructive testing Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays Part 2: Tangential radiographic inspection Data Limite: 2012-08-15 TC 138 prEN ISO 3452-2:2012 Non-destructive testing Penetrant testing Part 2: Testing of penetrant materials (ISO/DIS 3452-2:2012) Data Limite: 2012-09-12 TC 138 prEN ISO 3452-3:2012 Non-destructive testing Penetrant testing Part 3: reference test blocks (ISO/DIS 3452-3:2012) Data Limite: 2012-09-12 TC 138 prEN ISO 9712:2012 Non-destructive testing Qualification and certification of NDT personnel (ISO/FDIS 9712:2012) Data Limite: 2012-05-08 TC 139 prEN 927-3:2012 Paints and varnishes Coating materials and coating systems for exterior wood Part 3: Natural weathering test Data Limite: 2012-05-08

TC 139 prEN 13438:2012 Paints and varnishes Powder organic coatings for galvanized or sherardized steel products for construction purposes Data Limite: 2012-06-19 TC 139 prEN 16402:2012 Paint and varnishes Assessment of emissions of substances from coatings into indoor air Sampling, conditioning and testing Data Limite: 2012-08-15 TC 139 prEN ISO 2812-3:2012 Paints and varnishes Determination of resistance to liquids Part 3: Method using an absorbent medium (ISO/FDIS 2812-3:2012) Data Limite: 2012-06-19 TC 139 prEN ISO 3233-2:2012 Paints and varnishes Determination of the percentage volume of non-volatile matter Part 2: Determination by measurement of the dry-film density (ISO/DIS 3233-2:2012) Data Limite: 2012-09-26 TC 139 prEN ISO 9117-6:2012 Paints and varnishes Drying tests Part 6: Print-free test (ISO/FDIS 9117-6:2012) Data Limite: 2012-05-29 TC 139 prEN ISO 9227:2012 Corrosion tests in artificial atmospheres Salt spray tests (ISO/FDIS 9227:2012) Data Limite: 2012-05-09 TC 139 prEN ISO 13076:2012 Paints and varnishes Lighting and procedure for visual assessments of coatings (ISO/FDIS 13076:2012) Data Limite: 2012-06-19 TC 139 prEN ISO 13632:2012 Binders for paints and varnishes Rosin Sampling and sample preparation for colour measurement (ISO/FDIS 13632:2012) Data Limite: 2012-06-19 TC 139 prEN ISO 15528:2011 Paints, varnishes and raw materials for paints and varnishes Sampling (ISO/DIS 15528:2011) Data Limite: 2012-05-22 TC 139 prEN ISO 16014-5:2012 Plastics Determination of average molecular mass and molecular mass distribution of polymers using sizeexclusion chromatography Part 5: Method using light-scattering detection (ISO/FDIS 16014-5:2012) Data Limite: 2012-06-05 TC 139 prEN ISO 16474-1:2012 Paints and varnishes Methods of exposure to laboratory



light sources Part 1: General guidance (ISO/DIS 16474-1:2012) Data Limite: 2012-07-16 TC 139 prEN ISO 16474-2:2012 Paints and varnishes Methods of exposure to laboratory light sources Part 2: Xenon-arc lamps (ISO/DIS 16474-2:2012) Data Limite: 2012-07-16 TC 139 prEN ISO 16474-3:2012 Paints and varnishes Methods of exposure to laboratory light sources Part 3: Fluorescent UV lamps (ISO/DIS 16474-3:2012) Data Limite: 2012-07-16 TC 139 prEN ISO 16925:2012 Paints and varnishes Determination of the resistance of coatings to high-pressure water-jetting (ISO/DIS 16925:2012) Data Limite: 2012-09-26 TC 139 prEN ISO 16927:2012 Paints and varnishes Determination of the overcoatability and recoatability of a coating (ISO/DIS 16927:2012) Data Limite: 2012-09-26 TC 142 prEN 848-3:2012 Safety of woodworking machines One side moulding machines with rotating tools Part 3: Numerically controlled (NC) boring and routing machines Data Limite: 2012-07-10 TC 142 EN 848-1:2007+A1:2009 /prA 2:2012 Safety of woodworking machines One side moulding machines with rotating tool Part 1: Single spindle vertical moulding machines Data Limite: 2012-07-12 TC 142 EN 848-2:2007+A1:2009 /prA 2:2012 Safety of woodworking machines One side moulding machines with rotating tool Part 2: Single spindle hand fed/integrated fed routing machines Data Limite: 2012-07-12 TC 142 prEN 1870-7:2012 Safety of woodworking machines Circular sawing machines Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading Data Limite: 2012-07-03 TC 142 prEN 1870-9:2012 Safety of woodworking machines Circular sawing machines Part 9: Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading Data Limite: 2012-06-12 TC 142 prEN 1870-15:2012 Safety of woodworking machines Circular sawing machines Part 15: Multi-blade cross-cut sawing machines with integrated feed of the workpiece and manual

loading and/or unloading Data Limite: 2012-07-03 TC 142 prEN 1870-16:2012 Safety of woodworking machines Circular sawing machines Part 16: Double mitre sawing machines for V cutting Data Limite: 2012-07-03 TC 142 prEN 1870-17:2012 Safety of woodworking machines Circular sawing machines Part 17: Manual horizontal cutting cross-cut sawing machines with one saw unit (radial arm saws) Data Limite: 2012-07-03 TC 142 EN 1870-5:2002+A1:2009 /prA 2:2012 Safety of woodworking machines Circular sawing machines Part 5: Circular sawbenches/up-cutting cross-cut sawing machines Data Limite: 2012-06-26 TC 144 prEN 690:2012 Agricultural machinery Manure spreaders Safety Data Limite: 2012-06-12 TC 144 EN 15503:2009 /prA 1:2012 Garden equipment Garden blowers, vacuums and blower/vacuums Safety Data Limite: 2012-09-19 TC 144 prEN ISO 4254-12:2012 Agricultural machinery Safety Part 12: Rotary disc and drum mowers and flail mowers (ISO/FDIS 4254-12:2012) Data Limite: 2012-05-22 TC 144 prEN ISO 19932-1:2011 Equipment for crop protection Knapsack sprayers Part 1: Safety and environmental requirements (ISO/DIS 19932-1:2011) Data Limite: 2012-05-22 TC 144 prEN ISO 19932-2:2011 Equipment for crop protection Knapsack sprayers Part 2: Test methods (ISO/DIS 19932-2:2011) Data Limite: 2012-05-22 TC 150 prEN 1459-3:2012 Rough-terrain trucks Safety requirements and verification Part 3: Additional requirements for variable reach trucks fitted with elevating work platform Data Limite: 2012-08-08 TC 150 prEN 16307-1:2012 Industrial trucks Safety requirements and verification Part 1: Supplementary requirements for self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks Data Limite: 2012-10-03 TC 150 prEN ISO 3691-1:2012 Industrial trucks Safety requirements and verification Part



1: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks (ISO 3691-1:2011) Data Limite: 2012-06-19 TC 151 prEN 12001:2012 Conveying, spraying and placing machines for concrete and mortar Safety requirements Data Limite: 2012-06-05 TC 151 prEN 12643:2012 Earth-moving machinery Rubber-tyred machines Steering requirements (ISO 5010:1992 modified) Data Limite: 2012-06-19 TC 151 prEN ISO 3164:2012 Earth-moving machinery Laboratory evaluations of protective structures Specifications for deflection-limiting volume (ISO/DIS 3164:2012) Data Limite: 2012-06-12 TC 151 prEN ISO 19432:2012 Building construction machinery and equipment Portable, hand-held, internal combustion engine driven cut-off machines Safety requirements (ISO/FDIS 19432:2012) Data Limite: 2012-05-22 TC 153 prEN 1672-1:2012 Food processing machinery Basic concepts Part 1: Safety requirements Data Limite: 2012-08-29 TC 153 prEN 12268:2012 Food processing machinery Band saw machines Safety and hygiene requirements Data Limite: 2012-09-19 TC 153 prEN 12463:2012 Food processing machinery Filling machines and auxiliary machines Safety and hygiene requirements Data Limite: 2012-09-19 TC 153 EN 13289:2001 /prA 1:2012 Pasta processing plants Dryers and coolers Safety and hygiene requirements Data Limite: 2012-09-19 TC 153 EN 13378:2001 /prA 1:2012 Pasta processing plants Pasta presses Safety and hygiene requirements Data Limite: 2012-09-19 TC 153 EN 13379:2001 /prA 1:2012 Pasta processing plants Spreader, stripping and cutting machine, stick return conveyor, stick magazine Safety and hygiene requirements Data Limite: 2012-09-19 TC 153 prEN 13871:2012 Food processing machinery Cubes cutting machinery Safety and hygiene requirements

Data Limite: 2012-10-03 TC 153 prEN 15165:2012 Food processing machinery Forming machines Safety and hygiene requirements Data Limite: 2012-09-19 TC 154 prEN 1744-8:2012 Tests for chemical properties of aggregates Part 8: Sorting test to determine metal content of Municipal Incinerator Bottom Ash (MIBA) Aggregates Data Limite: 2012-06-12 TC 154 prEN 13055:2012 Lightweight aggregates for concrete, mortar, grout, bituminous mixtures, surface treatments and for unbound and bound applications Data Limite: 2012-09-26 TC 155 prCEN/TS 1555-7:2012 Plastics piping systems for the supply of gaseous fuels Polyethylene (PE) Part 7: Guidance for the assessment of conformity Data Limite: 2012-08-10 TC 155 prCEN/TS 12666-2:2012 Plastics piping systems for non-pressure underground drainage and sewerage Polyethylene (PE) Part 2: Guidance for the assessment of conformity Data Limite: 2012-06-22 TC 155 prCEN/TS 13476-4:2012 Plastics piping systems for non-pressure underground drainage and sewerage Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) Part 4: Guidance for the assessment of conformity Data Limite: 2012-05-09 TC 155 EN 1555-3:2010 /prA 1:2012 Plastics piping systems for the supply of gaseous fuels Polyethylene (PE) Part 3: Fittings Data Limite: 2012-08-03 TC 155 EN 12201-2:2011 /prA 1:2012 Plastics piping systems for water supply, and for drainage and sewerage under pressure Polyethylene (PE) Part 2: Pipes Data Limite: 2012-08-03 TC 155 EN 12201-3:2011 /prA 1:2012 Plastics piping systems for water supply, and for drainage and sewerage under pressure Polyethylene (PE) Part 3: Fittings Data Limite: 2012-08-03 TC 155 prEN ISO 10147:2012 Pipes and fittings made of crosslinked polyethylene (PE-X) Estimation of the degree of crosslinking by determination of the gel content (ISO 10147:2011) Data Limite: 2012-07-09



TC 160 prCEN/TS 16415:2012 Personal fall protection equipment Anchor devices Recommendations for anchor devices for use by more than one person simultaneously Data Limite: 2012-06-29 TC 160 prEN 795:2012 Personal fall protection equipment Anchor devices Data Limite: 2012-05-08 TC 161 prEN ISO 17249:2012 Safety footwear with resistance to chain saw cutting (ISO/DIS 17249:2012) Data Limite: 2012-08-29 TC 162 prEN 374-4:2012 Protective gloves against chemicals and micro-organisms Part 4: Determination of resistance to degradation by chemicals Data Limite: 2012-08-08 TC 162 prEN 1621-2:2012 Motorcyclists' protective clothing against mechanical impact Part 2: Motorcyclists' back protectors - Requirements and test methods Data Limite: 2012-08-08 TC 162 prEN 13138-1:2012 Buoyant aids for swimming instruction Part 1: Safety requirements and test methods for buoyant aids to be worn Data Limite: 2012-08-15 TC 162 prEN 13138-3:2012 Buoyant aids for swimming instruction Part 3: Safety requirements and test methods for swim seats to be worn Data Limite: 2012-08-15 TC 162 prEN 13594:2012 Protective gloves for professional motorcycle riders Requirements and test methods Data Limite: 2012-08-08 TC 163 prEN 14428:2012 Shower enclosures Functional requirements and test methods Data Limite: 2012-06-12 TC 164 prEN 896:2012 Chemicals used for treatment of water intended for human consumption Sodium hydroxide Data Limite: 2012-08-15 TC 164 prEN 897:2012 Chemicals used for treatment of water intended for human consumption Sodium carbonate Data Limite: 2012-08-15 TC 164 prEN 898:2012 Chemicals used for treatment of water intended for human consumption Sodium hydrogen carbonate Data Limite: 2012-08-15

TC 164 prEN 1421:2012 Chemicals used for treatment of water intended for human consumption Ammonium chloride Data Limite: 2012-08-22 TC 164 prEN 12120:2012 Chemicals used for treatment of water intended for human consumption Sodium hydrogen sulfite Data Limite: 2012-08-22 TC 164 prEN 12121:2012 Chemicals used for treatment of water intended for human consumption Sodium disulfite Data Limite: 2012-08-22 TC 164 prEN 12123:2012 Chemicals used for treatment of water intended for human consumption Ammonium sulfate Data Limite: 2012-08-22 TC 164 prEN 12124:2012 Chemicals used for treatment of water intended for human consumption - Sodium sulfite Data Limite: 2012-08-22 TC 164 prEN 12125:2012 Chemicals used for treatment of water intended for human consumption Sodium thiosulfate Data Limite: 2012-08-22 TC 164 prEN 12126:2012 Chemicals used for treatment of water intended for human consumption Liquefied ammonia Data Limite: 2012-08-22 TC 164 prEN 12173:2012 Chemicals used for treatment of water intended for human consumption Sodium fluoride Data Limite: 2012-08-22 TC 164 prEN 12386:2012 Chemicals used for treatment of water intended for human consumption Copper sulfate Data Limite: 2012-08-22 TC 164 prEN 12905:2012 Products used for treatment of water intended for human consumption Expanded aluminosilicate Data Limite: 2012-08-08 TC 164 prEN 12906:2012 Products used for treatment of water intended for human consumption Pumice Data Limite: 2012-08-08 TC 164 prEN 12909:2012 Products used for treatment of water intended for human consumption Anthracite Data Limite: 2012-08-08



TC 164 prEN 12910:2012 Products used for treatment of water intended for human consumption Garnet Data Limite: 2012-08-08 TC 164 prEN 12912:2012 Products used for treatment of water intended for human consumption Barite Data Limite: 2012-08-08 TC 164 prEN 12913:2012 Products used for treatment of water intended for human consumption Powdered diatomaceous earth Data Limite: 2012-08-08 TC 164 prEN 12914:2012 Products used treatment of water intended for human consumption Powdered perlite Data Limite: 2012-08-08 TC 164 prEN 13752:2012 Chemicals used for treatment of water intended for human consumption Manganese dioxide Data Limite: 2012-06-12 TC 164 prEN 15028:2012 Chemicals used for treatment of water intended for human consumption Sodium chlorate Data Limite: 2012-08-15 TC 164 prEN 15029:2012 Products used for treatment of water intended for human consumption Iron (III) hydroxide oxide Data Limite: 2012-08-08 TC 164 prEN 15030:2012 Chemicals used for treatment of water intended for human consumption Silver salts for intermittent use Data Limite: 2012-08-22 TC 164 prEN 15091:2012 Sanitary tapware Electronic opening and closing sanitary tapware Data Limite: 2012-09-12 TC 164 prEN 15482:2012 Chemicals used for treatment of water intended for human consumption Sodium permanganate Data Limite: 2012-08-15 TC 164 prEN 16370:2011 Chemicals used for treatment of water intended for human consumption Sodium chloride for on site electrochlorination using membrane cells Data Limite: 2012-05-15 TC 164 prEN 16380:2012 Chemicals used for treatment of swimming pool water Potassium peroxomonosulfate Data Limite: 2012-07-02

TC 164 prEN 16381:2012 Chemicals used for treatment of swimming pool water Sodium peroxodisulfate Data Limite: 2012-07-02 TC 164 prEN 16399:2012 Chemicals used for treatment of swimming pool water Sodium thiosulfate Data Limite: 2012-08-15 TC 164 prEN 16400:2012 Chemicals used for treatment of swimming pool - Hydrogen peroxide Data Limite: 2012-08-15 TC 164 prEN 16401:2012 Chemicals used for treatment of swimming pool water Sodium chloride used for electrochlorinator systems Data Limite: 2012-08-15 TC 164 prEN 16409:2012 Chemicals used for treatment of water for human consumption Dolomitic lime Data Limite: 2012-08-22 TC 164 prEN 16421:2012 Influence of materials on water for human consumption Enhancement of microbial growth (EMG) Data Limite: 2012-09-12 TC 165 prEN 1124-4:2012 Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for wastewater systems Part 4: Components for vacuum drainage systems and for drainage systems on ships Data Limite: 2012-07-02 TC 165 prEN 16397-1:2012 Flexible couplings Part 1: Performance requirements Data Limite: 2012-08-08 TC 165 prEN 16397-2:2012 Flexible couplings Part 2: Materials and dimensions for metal banded flexible couplings Data Limite: 2012-08-08 TC 170 prEN ISO 11987:2012 Ophthalmic optics Contact lenses Determination of shelf-life (ISO/FDIS 11987:2012) Data Limite: 2012-06-26 TC 170 prEN ISO 13666:2012 Ophthalmic optics Spectacle lenses Vocabulary (ISO/FDIS 13666:2012) Data Limite: 2012-08-03 TC 172 prEN 16418:2012 Paper and board Determination of the cytotoxicity of aqueous extracts using a metabolically competent hepatoma cell line (HepG2) Data Limite: 2012-08-29



TC 172 prEN ISO 536:2012 Paper and board Determination of grammage (ISO/FDIS 536:2012) Data Limite: 2012-06-22 TC 175 prEN 14076:2012 Timber stairs Terminology Data Limite: 2012-09-19 TC 183 prEN 16403:2012 Waste management Waste visual elements Data Limite: 2012-08-15 TC 185 prEN ISO 898-5:2012 Mechanical properties of fasteners made of carbon steel and alloy steel Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread (ISO/FDIS 898-5:2012) Data Limite: 2012-05-08 TC 185 prEN ISO 1891-2:2012 Fasteners Terminology Part 2: Vocabulary and definitions for coatings (ISO/DIS 1891-2:2012) Data Limite: 2012-07-09 TC 185 EN ISO 10642:2004 /prA 1:2012 Hexagon socket countersunk head screws (ISO 10642:2004/FDAM 1:2012) Data Limite: 2012-07-05 TC 185 prEN ISO 14581:2012 Fasteners Hexalobular socket countersunk flat head screws (ISO/DIS 14581:2012) Data Limite: 2012-07-02 TC 185 prEN ISO 14582:2012 Hexalobular socket countersunk head screws, high head (ISO/DIS 14582:2012) Data Limite: 2012-07-02 TC 187 prEN ISO 1927-1:2012 Monolithic (unshaped) refractory products Part 1: Introduction and classification (ISO/FDIS 1927-1:2012) Data Limite: 2012-07-03 TC 187 prEN ISO 19115-1:2011 Geographic information Metadata Part 1: Fundamentals (ISO/DIS 19115-1:2011) Data Limite: 2012-05-15 TC 188 prEN 12881-1:2012 Conveyor belts Fire simulation flammability testing Part 1: Propane burner tests Data Limite: 2012-08-29 TC 188 EN ISO 9856:2003 /prA 1:2012 Conveyor belts Determination of elastic and permanent

elongation and calculation of elastic modulus (ISO 9856:2003/FDAM 1:2012) Data Limite: 2012-06-05 TC 189 prEN 16416:2012 Geosynthetic clay barriers Determination of water flux index Flexible wall permeameter method at constant head Data Limite: 2012-08-29 TC 191 prEN ISO 5923:2012 Equipment for fire protection and fire fighting Fire extinguishing media Carbon dioxide (ISO/FDIS 5923:2012) Data Limite: 2012-08-29 TC 195 prEN ISO 10121-1:2012 Test method for assessing the performance of gas-phase air cleaning media and devices for general ventilation Part 1: Gas-phase air cleaning media (ISO/DIS 10121-1:2012) Data Limite: 2012-10-03 TC 198 prEN 1034-17:2012 Safety of machinery Safety requirements for the design and construction of paper making and finishing machines Part 17: Tissue making machines Data Limite: 2012-06-12 TC 198 prEN 1034-21:2012 Safety of machinery Safety requirements for the design and construction of paper making and finishing machines Part 21: Coating machines Data Limite: 2012-06-12 TC 198 prEN 1034-27:2012 Safety of machinery Safety requirements for the design and construction of paper making and finishing machines Part 27: Roll handling systems Data Limite: 2012-06-12 TC 203 prEN 877:2012 Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings Requirements, test methods and quality assurance Data Limite: 2012-06-12 TC 203 prEN 12842:2012 Ductile iron fittings for PVC-U or PE piping systems Requirements and test methods Data Limite: 2012-05-22 TC 204 EN ISO 11137-1:2006 /prA 1:2012 Sterilization of health care products Radiation Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 11137-1:2006/Amd.1:2012) Data Limite: 2012-10-03 TC 204 EN ISO 13408-6:2011 /prA 1:2012 Aseptic processing of health care products Part 6: Isolator systems (ISO 13408-6:2005/DAM 1:2012) Data Limite: 2012-08-29



TC 205 prEN 14683:2012 Medical face masks Requirements and test methods Data Limite: 2012-10-10 TC 205 EN ISO 8536-4:2010 /prA 1:2011 Infusion equipment for medical use Part 4: Infusion sets for single use, gravity feed (ISO 8536-4:2010/DAM 1:2011) Data Limite: 2012-05-22 TC 205 prEN ISO 80601-2-56:2012 Medical electrical equipment Part 2-56: Particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement (ISO 80601-2-56:2009) Data Limite: 2012-08-15 TC 206 prEN ISO 10993-12:2012 Biological evaluation of medical devices Part 12: Sample preparation and reference materials (ISO/FDIS 10993-12:2012) Data Limite: 2012-06-12 TC 207 prEN 1728:2012 Furniture Seating Test methods for the determination of strength and durability Data Limite: 2012-05-08 TC 207 prEN 16121:2012 Non-domestic storage furniture Requirements for safety, strength, durability and stability Data Limite: 2012-07-08 TC 207 prEN 16122:2012 Domestic and non-domestic storage furniture Test methods for the determination of strength, durability and stability Data Limite: 2012-05-08 TC 212 prEN 16256-1:2012 Pyrotechnic articles Theatrical pyrotechnic articles Part 1: Terminology Data Limite: 2012-07-03 TC 212 prEN 16256-2:2012 Pyrotechnic articles Theatrical pyrotechnic articles Part 2: Categories of theatrical pyrotechnic articles Data Limite: 2012-07-03 TC 212 prEN 16261-1:2012 Pyrotechnic articles Fireworks, category 4 Part 1: Terminology Data Limite: 2012-06-19 TC 212 prEN 16261-3:2012 Pyrotechnic articles Fireworks, Category 4 Part 3: Test methods Data Limite: 2012-06-19 TC 212 prEN 16261-4:2012 Pyrotechnic articles Fireworks, Category 4 Part 4: Minimum labelling requirements and instructions for use

Data Limite: 2012-06-19 TC 215 prEN ISO 5356-1:2012 Anaesthetic and respiratory equipment Conical connectors Part 1: Cones and sockets (ISO/DIS 5356-1:2012) Data Limite: 2012-09-05 TC 215 prEN ISO 5367:2012 Anaesthetic and respiratory equipment Breathing sets and connectors (ISO/DIS 5367:2012) Data Limite: 2012-07-23 TC 215 EN ISO 8359:2009 /prA 1:2012 Oxygen concentrators for medical use Safety requirements Amendment 1 (ISO 8359:1996/FDAM 1:2012) Data Limite: 2012-07-12 TC 215 prEN ISO 10079-2:2012 Medical suction equipment Part 2: Manually powered suction equipment (ISO/DIS 10079-2:2012) Data Limite: 2012-07-23 TC 215 prEN ISO 10079-3:2012 Medical suction equipment Part 3: Suction equipment powered from a vacuum or positive pressure gas source (ISO/DIS 10079-3:2012) Data Limite: 2012-08-01 TC 215 prEN ISO 80601-2-67:2012 Medical electrical equipment Part 2-67: Particular requirements for basic safety and essential performance of oxygen-conserving equipment (ISO/DIS 80601-2-67:2012) Data Limite: 2012-06-26 TC 217 prCEN/TS 16384:2012 Synthetic sport systems - Leaching test Data Limite: 2012-05-16 TC 218 prEN 13482:2012 Rubber hoses and hose assemblies for asphalt and bitumen Specification Data Limite: 2012-08-08 TC 219 prEN 12496:2012 Galvanic anodes for cathodic protection in seawater and saline mud Data Limite: 2012-06-26 TC 224 prCEN/TS 16428:2012 Biometrics Interoperability profiles Best Practices for slap tenprint captures Data Limite: 2012-07-26 TC 224 prEN 14890-1:2012 Application Interface for smart cards used as Secure Signature Creation Devices Part 1: Basic services Data Limite: 2012-09-19



TC 224 prEN 14890-2:2012 Application Interface for smart cards used as Secure Signature Creation Devices Part 2: Additional Services Data Limite: 2012-08-08 TC 227 prEN 12697-47:2012 Bituminous mixtures Test methods for hot mix asphalt Part 42: Amount of foreign matter in reclaimed asphalt Data Limite: 2012-09-12 TC 230 prEN 13946:2012 Water quality Guidance for the routine sampling and pre-treatment of benthic diatoms from rivers and lakes Data Limite: 2012-07-02 TC 230 prEN 14184:2012 Water quality Guidance for the surveying of aquatic macrophytes in running waters Data Limite: 2012-07-02 TC 230 prEN 14407:2012 Water quality Guidance for the identification, enumeration and interpretation of benthic diatom samples from rivers and lakes Data Limite: 2012-07-02 TC 230 prEN ISO 5814:2012 Water quality Determination of dissolved oxygen Electrochemical probe method (ISO/FDIS 5814:2012) Data Limite: 2012-07-03 TC 230 prEN ISO 10870:2012 Water quality Guidelines for the selection of sampling methods and devices for benthic macroinvertebrates in fresh waters (ISO/FDIS 10870:2012) Data Limite: 2012-06-19 TC 230 prEN ISO 14403-1:2012 Water quality Determination of total cyanide and free cyanide using flow analysis (FIA and CFA) Part 1: Method using flow injection analysis (FIA) (ISO/FDIS 14403-1:2012) Data Limite: 2012-06-12 TC 230 prEN ISO 14403-2:2012 Water quality Determination of total cyanide and free cyanide using flow analysis (FIA and CFA) Part 2: Method using continuous flow analysis (CFA) (ISO/FDIS 14403-2:2012) Data Limite: 2012-06-12 TC 230 prEN ISO 16665:2011 Water quality Guidelines for quantitative sampling and sample processing of marine soft-bottom macrofauna (ISO/DIS 16665:2011) Data Limite: 2012-05-08 TC 231 prCEN/TR 16391:2012 Mechanical vibration and shock Hand-transmitted vibration Influence of coupling forces at the hand-machine interface on exposure evaluation

Data Limite: 2012-05-23 TC 231 EN ISO 20643:2008 /prA 1:2012 Mechanical vibration - Hand-held and hand-guided machinery Principles for evaluation of vibration emission Amendment 1: Accelerometer positions (ISO 20643:2005/FDAM 1:2012) Data Limite: 2012-06-19 TC 234 prCEN/TR 16395:2012 Gas Infrastructure CEN/TC 234 Pressure Definitions Guideline Document Data Limite: 2012-05-23 TC 234 prEN 12583:2012 Gas infrastructure Compressor stations Functional requirements Data Limite: 2012-08-15 TC 237 prEN 12405-2:2012 Gas meters Conversion devices Part 2: Energy conversion Data Limite: 2012-05-08 TC 242 prEN 12397:2012 Safety requirements for cableway installations designed to carry persons - Operation Operation Data Limite: 2012-10-10 TC 242 prEN 13796-2:2012 Safety requirements for cableway installations designed to carry persons Carriers Part 2: Slipping resistance tests for grips Data Limite: 2012-10-10 TC 242 prEN 13796-3:2012 Safety requirements for cableway installations designed to carry persons Carriers Part 3: Fatigue tests Data Limite: 2012-10-10 TC 245 prEN 1645-1:2012 Leisure accommodation vehicles Caravans Part 1: Habitation requirements relating to health and safety Data Limite: 2012-05-15 TC 245 prEN 1646-1:2012 Leisure accommodation vehicles Motor caravans Part 1: Habitation requirements relating to health and safety Data Limite: 2012-05-15 TC 245 prEN 1647:2012 Leisure accommodation vehicles Caravan holiday homes Habitation requirements relating to health and safety Data Limite: 2012-05-15 TC 245 prEN 1648-1:2012 Leisure accommodation vehicles 12 V direct current extra low voltage electrical installations Part 1: Caravans Data Limite: 2012-05-15 TC 245 prEN 1648-2:2012 Leisure accommodation vehicles 12 V direct current extra



low voltage electrical installations Part 2: Motor caravans Data Limite: 2012-05-15 TC 246 prEN 1469:2012 Natural stone products Slabs for cladding Requirements Data Limite: 2012-06-12 TC 246 prEN 12057:2012 Natural stone products Modular tiles Requirements Data Limite: 2012-06-12 TC 246 prEN 12058:2012 Natural stone products Slabs for floors and stairs Requirements Data Limite: 2012-06-12 TC 247 prEN 13321-1:2012 Open data communication in building automation, controls and building management Home and building electronic system Part 1: Product and system requirements Data Limite: 2012-07-16 TC 247 prEN 13321-2:2012 Open Data Communication in Building Automation, Controls and Building Management Home and Building Electronic Systems Part 2: KNXnet/IP Communication Data Limite: 2012-08-29 TC 247 prEN ISO 16484-5:2012 Building automation and control systems Part 5: Data communication protocol (ISO/FDIS 16484-5:2012) Data Limite: 2012-06-29 TC 248 prCEN/TR 16422:2012 Classification of thermoregulatory properties Data Limite: 2012-07-26 TC 248 prEN ISO 1140:2012 Fibre ropes Polyamide 3-, 4-, 8- and 12- strand ropes (ISO/FDIS 1140:2012) Data Limite: 2012-07-10 TC 248 prEN ISO 1141:2012 Fibre ropes Polyester 3-, 4-, 8- and 12- strand ropes (ISO/FDIS 1141:2012) Data Limite: 2012-07-10 TC 248 prEN ISO 1346:2012 Fibre ropes Polypropylene split film, monofilament and multifilament (PP2) and polypropylene high tenacity multifilament (PP3) 3-, 4-, 8- and 12- strand ropes (ISO/FDIS 1346:2012) Data Limite: 2012-07-10 TC 248 prEN ISO 1833-22:2011 Textiles Quantitative chemical analysis Part 22: Mixtures of viscose or certain types of cupro or modal or lyocell and flax fibres (method using formic acid and zinc chloride) (ISO/DIS 1833-22:2011) Data Limite: 2012-05-08

TC 248 prEN ISO 1833-25:2011 Textiles Quantitative chemical analysis Part 25: Mixtures of polyester and some other fibres (method using trichloracetic acid and chloroform) (ISO/DIS 1833-25:2011) Data Limite: 2012-05-08 TC 248 prEN ISO 16373-2:2012 Textiles Dyestuffs Part 2: General method for the determination of extractable dyestuffs including allergenic and carcinogenic substances (ISO/DIS 16373-2:2012) Data Limite: 2012-10-03 TC 248 prEN ISO 30023:2011 Textiles Qualification symbols for labelling workwear to be industrially laundered (ISO 30023:2010) Data Limite: 2012-05-22 TC 249 prCEN/TS 16398:2012 Plastics Template for reporting and communication of bio-based carbon content and recovery options of biopolymers and bioplastics Data sheet Data Limite: 2012-06-15 TC 249 prEN ISO 75-1:2012 Plastics Determination of temperature of deflection under load Part 1: General test method (ISO/DIS 75-1:2012) Data Limite: 2012-06-12 TC 249 EN ISO 178:2010 /prA 1:2011 Plastics Determination of flexural properties (ISO 178:2010/DAM 1:2011) Data Limite: 2012-05-22 TC 249 EN ISO 180:2000 /prA 2:2012 Plastics Determination of Izod impact strength Amendment 2: Precision data (ISO 180:2000/DAM 2:2012) Data Limite: 2012-06-12 TC 249 prEN ISO 306:2012 Plastics Thermoplastic materials Determination of Vicat softening temperature (VST) (ISO/DIS 306:2012) Data Limite: 2012-06-12 TC 249 EN ISO 899-1:2003 /prA 1:2012 Plastics Determination of creep behaviour Part 1: Tensile creep (ISO 899-1:2003/DAM 1:2012) Data Limite: 2012-07-09 TC 249 EN ISO 899-2:2003 /prA 1:2012 Plastics Determination of creep behaviour Part 2: Flexural creep by three-point loading (ISO 899-2:2003/DAM 1:2012) Data Limite: 2012-07-09



TC 249 prEN ISO 1183-1:2012 Plastics Methods for determining the density of non-cellular plastics Part 1: Immersion method, liquid pyknometer method and titration method (ISO/FDIS 1183-1:2012) Data Limite: 2012-05-01 TC 249 EN ISO 1628-1:2009 /prA 1:2012 Plastics Determination of the viscosity of polymers in dilute solution using capillary viscometers Part 1: General principles - Amendment 1 (ISO 1628-1:2009/FDAM 1:2012) Data Limite: 2012-06-12 TC 249 prEN ISO 3385:2012 Flexible cellular polymeric materials Determination of fatigue by constant-load pounding (ISO/DIS 3385:2012) Data Limite: 2012-08-22 TC 249 prEN ISO 3673-2:2012 Plastics Epoxy resins Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins (ISO/FDIS 3673-2:2012) Data Limite: 2012-06-26 TC 249 prEN ISO 11833-1:2012 Plastics - Unplasticized poly(vinyl chloride) sheets Types, dimensions and characteristics Part 1: Sheets of thickness not less than 1 mm (ISO/FDIS 11833-1:2012) Data Limite: 2012-05-22 TC 249 prEN ISO 15791-1:2012 Plastics Development and use of intermediate-scale fire tests for plastics products Part 1: General guidance (ISO/DIS 15791-1:2012) Data Limite: 2012-09-12 TC 249 prEN ISO 17556:2012 Plastics Determination of the ultimate aerobic biodegradability of plastic materials in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved (ISO/FDIS 17556:2012) Data Limite: 2012-06-19 TC 250 EN 1996-1-1:2005 /prEN 1:2012 Eurocode 6: Design of masonry structures Part 1-1: General rules for reinforced and unreinforced masonry structures Data Limite: 2012-06-05 TC 250 EN 1998-1:2004 /prA 1:2012 Eurocode 8: Design of structures for earthquake resistance Part 1: General rules, seismic actions and rules for buildings Data Limite: 2012-06-08 TC 251 prCEN ISO/TS 14265:2012 Health Informatics Classification of purposes for processing personal health information (ISO 14265:2011) Data Limite: 2012-05-23

TC 251 prEN ISO 10781:2012 Electronic health record-system functional model (ISO/DIS 10781:2012) Data Limite: 2012-09-19 TC 251 prEN ISO 11073-10420:2012 Health informatics Personal health device communication Part 10420: Device specialization - Body composition analyzer (ISO/FDIS 11073-10420:2012) Data Limite: 2012-09-19 TC 251 prEN ISO 11073-10421:2012 Health informatics Personal health device communication Part 10421: Device specialization - Peak expiratory flow monitor (peak flow) (ISO/FDIS 11073-10421:2012) Data Limite: 2012-09-19 TC 251 prEN ISO 11073-10472:2012 Health Informatics Personal health device communication Part 10472: Device specialization - Medication monitor (ISO/FDIS 11073-10472:2012) Data Limite: 2012-09-19 TC 251 prEN ISO 11073-30400:2012 Health informatics Point-of-care medical device communication Part 30400: Interface profile - Cabled Ethernet (ISO/FDIS 11073-30400:2012) Data Limite: 2012-09-19 TC 251 prEN ISO 13606-1:2012 Health informatics Electronic health record communication Part 1: Reference model (ISO 13606-1:2008) Data Limite: 2012-07-23 TC 252 prCEN/TR 16411:2012 Child use and care articles - 2011 compiled interpretations of CEN/TC 252 standards Data Limite: 2012-07-05 TC 252 prEN 1466:2011 Child use and care articles Carry cots and stands Safety requirements and test methods Data Limite: 2012-05-15 TC 252 prEN 16232:2012 Child use and care articles Infant swings Data Limite: 2012-08-10 TC 254 prEN 13956:2012 Flexible sheet for waterproofing Plastic and rubber sheets for roof waterproofing Definitions and characteristics Data Limite: 2012-09-26 TC 256 EN 13103-:2009+A1:2010 /prA 2:2012 Railway applications Wheelsets and bogies - Non-powered axles Design method Data Limite: 2012-05-02



TC 256 prEN 13802:2012 Railway applications Suspension components Hydraulic dampers Data Limite: 2012-07-02 TC 256 prEN 13848-6:2012 Railway applications Track - Track geometry quality Part 6: Characterisation of track geometry quality Data Limite: 2012-10-10 TC 256 prEN 14587-3:2012 Railway applications Track - Flash butt welding of rails Part 3: Welding in association with crossing construction Data Limite: 2012-06-05 TC 256 prEN 15437-2:2012 Railway applications Axlebox condition monitoring - Interface and design requirements Part 2: Performance and design requirements of on-board systems for temperature monitoring Data Limite: 2012-07-10 TC 256 EN 15528:2008 /prA 1:2012 Railway applications Line categories for managing the interface between load limits of vehicles and infrastructure Data Limite: 2012-07-19 TC 256 prEN 15839:2012 Railway applications Testing for the acceptance of running characteristics of railway vehicles - Freight wagons Testing of running safety under longitudinal compressive forces Data Limite: 2012-06-26 TC 256 prEN 15954-1:2012 Railway applications Track - Trailers and associated equipment Part 1: Technical requirements for running and working Data Limite: 2012-07-02 TC 256 prEN 15955-1:2012 Railway applications Track - Demountable machines and associated equipment Part 1: Technical requirements for running and working Data Limite: 2012-07-02 TC 256 prEN 16028:2012 Railway applications Wheel/rail friction management Lubricants for trainborne and trackside applications Data Limite: 2012-05-08 TC 256 prEN 16183-3:2012 Railway applications Driver's cab Part 3: Design of displays Data Limite: 2012-08-22 TC 256 prEN 16404:2012 Railway Applications Re-railing and recovery requirements for railway vehicles Data Limite: 2012-08-15

TC 256 prEN 16431:2012 Railway applications Track Hollow sleepers and bearers Data Limite: 2012-10-10 TC 256 prEN 16432-1:2012 Railway applications Ballastless track systems Part 1: General requirements Data Limite: 2012-10-10 TC 256 prEN ISO 19156:2012 Geographic information Observations and measurements (ISO 19156:2011) Data Limite: 2012-06-26 TC 260 prEN 13368-2:2012 Fertilizers Determination of chelating agents in fertilizers by chromatography Part 2: Determination of Fe chelated by o,o-EDDHA, o,o-EDDHMA and HBED by ion pair chromatography Data Limite: 2012-06-05 TC 260 prEN 16195:2012 Fertilizers Determination of chlorides in the absence of organic material Data Limite: 2012-09-05 TC 260 prEN 16196:2012 Fertilizers Manganimetric determination of extracted calcium following precipitation in the form of oxalate Data Limite: 2012-09-05 TC 260 prEN 16197:2012 Fertilizers - Determination of magnesium by atomic absorption spectrometry Data Limite: 2012-09-05 TC 260 prEN 16198:2012 Fertilizers Determination of magnesium by complexometry Data Limite: 2012-09-05 TC 260 prEN 16199:2012 Fertilizers Determination of the sodium extracted by flame-emission spectrometry Data Limite: 2012-09-05 TC 261 prEN ISO 8611-1:2012 Pallets for materials handling Flat pallets Part 1: Test methods (ISO 8611-1:2011) Data Limite: 2012-06-12 TC 261 prEN ISO 8611-2:2012 Pallets for materials handling Flat pallets Part 2: Performance requirements and selection of tests (ISO 8611-2:2011) Data Limite: 2012-06-12 TC 261 prEN ISO 8611-3:2012 Pallets for materials handling Flat pallets Part 3: Maximum working loads



(ISO 8611-3:2011) Data Limite: 2012-06-12 TC 261 prEN ISO 16495:2012 Packaging Transport packaging for dangerous goods Test methods (ISO/DIS 16495:2012) Data Limite: 2012-07-03 TC 263 prEN 1143-2:2012 Secure storage units Requirements, classification and methods of tests for resistance to burglary Part 2: Deposit systems Data Limite: 2012-07-09 TC 264 prEN 16413:2012 Air quality Biomonitoring with lichens Assessing epiphytic lichen diversity Data Limite: 2012-08-29 TC 264 prEN 16414:2012 Air quality Biomonitoring with mosses Accumulation of atmospheric contaminants in mosses collected in situ: from the collection to the preparation of samples Data Limite: 2012-08-29 TC 267 prEN 13480-8:2012 Metallic industrial piping Part 8: Additionnal requirements for aluminium and aluminium alloy piping Data Limite: 2012-09-12 TC 271 prEN 1539:2012 Dryers and ovens, in which flammable substances are released Safety requirements Data Limite: 2012-08-22 TC 275 prCEN ISO/TS 6579-2:2012 Microbiology of food and animal feed Horizontal method for the detection, enumeration and serotyping of salmonella Part 2: Enumeration by a miniaturized most probable number technique (ISO/DTS 6579-2:2012) Data Limite: 2012-06-15 TC 275 prCEN ISO/TS 13136:2012 Microbiology of food and animal feed Real-time polymerase chain reaction (PCR)-based method for the detection of food-borne pathogens Horizontal method for the detection of Shiga toxin-producing Escherichia coli (STEC) belonging to O157, O111, O26, O103 and O145 serogroups (ISO/DTS 13136:2012) Data Limite: 2012-06-15 TC 275 prEN 12393-1:2012 Foods of plant origin Multiresidue methods for the determination of pesticide residues by GC or LC-MS/MS Part 1: General considerations Data Limite: 2012-07-16 TC 275 prEN 12393-2:2012 Foods of plant origin Multiresidue methods for the determination of pesticide residues by GC or LC-MS/MS Part 2: Methods for extraction and clean-up Data Limite: 2012-07-16

TC 275 prEN 12393-3:2012 Foods of plant origin Multiresidue methods for the determination of pesticide residues by GC or LC-MS/MS Part 3: Determination and confirmatory tests Data Limite: 2012-07-16 TC 275 prEN 12822:2012 Foodstuffs Determination of vitamin E by high performance liquid chromatography Measurement of a-, s-, y- and õ-tocopherols Data Limite: 2012-08-22 TC 275 prEN 12823-1:2012 Foodstuffs Determination of vitamin A by high performance liquid chromatography Part 1: Measurement of alltrans-retinol and 13-cis-retinol Data Limite: 2012-08-22 TC 275 prEN 14122:2012 Foodstuffs Determination of vitamin B1 by HPLC Data Limite: 2012-08-22 TC 275 prEN 14152:2012 Foodstuffs Determination of vitamin B2 by HPLC Data Limite: 2012-08-22 TC 275 prEN 14164:2012 Foodstuffs Determination of vitamin B6 by HPLC Data Limite: 2012-08-22 TC 275 prEN ISO 4833-1:2012 Microbiology of food and animal feed Horizontal method for the enumeration of microorganisms Part 1: Colony count at 30 degrees C by the pour plate technique (ISO/DIS 4833-1:2012) Data Limite: 2012-07-23 TC 275 prEN ISO 4833-2:2012 Microbiology of food and animal feed Horizontal method for the enumeration of microorganisms Part 2: Colony count at 30 degrees C by the surface plating technique (ISO/DIS 4833-2:2012) Data Limite: 2012-07-23 TC 275 EN ISO 21569:2005 /prA 1:2012 Foodstuffs Methods of analysis for the detection of genetically modified organisms and derived products Qualitative nucleic acid based methods (ISO 21569:2005/DAM 1:2012) Data Limite: 2012-07-09 TC 275 EN ISO 21570:2005 /prA 1:2012 Foodstuffs Methods of analysis for the detection of genetically modified organisms and derived products Quantitative nucleic acid based methods (ISO 21570:2005/DAM 1:2012) Data Limite: 2012-10-10 TC 278 prCEN/TR 16405:2012 Intelligent transport systems ESafety ECall additional optional data set for heavy goods vehicles eCall Data Limite: 2012-06-29



TC 278 prCEN/TS 16406:2012 Intelligent transport systems Public transport Indirect Fulfilment for Rail Data Limite: 2012-07-12 TC 278 prCEN/TS 16439:2012 Electronic fee collection Security framework Data Limite: 2012-07-26 TC 278 prEN 28701:2012 Intelligent transport systems Public transport Identification of Fixed Objects in Public Transport (IFOPT) Data Limite: 2012-08-08 TC 281 prEN 1860-1:2012 Appliances, solid fuels and firelighters for barbecueing Part 1: Barbecues burning solid fuels - Requirements and test methods Data Limite: 2012-08-15 TC 285 EN ISO 21536:2009 /prA 1:2012 Non-active surgical implants Joint replacement implants Specific requirements for knee-joint replacement implants (ISO 21536:2007/DAmd 1:2012) Data Limite: 2012-08-08 TC 286 prEN 12252:2012 LPG equipment and accessories Equipping of LPG road tankers Data Limite: 2012-06-12 TC 287 prEN ISO 19101-1:2012 Geographic information Reference model Part 1: Fundamentals (ISO/DIS 19101-1:2012) Data Limite: 2012-09-19 TC 289 prEN 13336:2012 Leather Upholstery leather characteristics Guide for selection of leather for furniture Data Limite: 2012-07-10 TC 289 prEN 16419:2012 Leather Chamois leather Classification and requirements Data Limite: 2012-08-29 TC 289 prEN ISO 11646:2012 Leather Measurement of area (ISO/DIS 11646:2012) Data Limite: 2012-06-12 TC 289 prEN ISO 17130:2012 Leather Physical and mechanical tests Determination of dimensional change (ISO/DIS 17130:2012) Data Limite: 2012-06-12 TC 289 prEN ISO 17489:2012 Leather Chemical tests Determination of tan content in

tanning agents (ISO/DIS 17489:2012) Data Limite: 2012-06-12 TC 289 prEN ISO 17502:2012 Leather Determination of surface reflectance (ISO/DIS 17502:2012) Data Limite: 2012-06-12 TC 289 prEN ISO 26082-2:2011 Leather Physical and mechanical test methods for the determination of soiling Part 2: Tumbling method (ISO/FDIS 26082-2:2011) Data Limite: 2012-05-08 TC 290 prEN ISO 2538-1:2012 Geometrical product specifications (GPS) Wedges Part 1: Series of angles and slopes (ISO/DIS 2538-1:2012) Data Limite: 2012-07-16 TC 290 prEN ISO 2538-2:2012 Geometrical product specifications (GPS) Wedges Part 2: Dimensioning and tolerancing (ISO/DIS 2538-2:2012) Data Limite: 2012-07-16 TC 290 prEN ISO 13102:2012 Geometrical product specifications (GPS) Dimensional measuring equipment: Electronic digital indicator Design and metrological characteristics (ISO/FDIS 13102:2012) Data Limite: 2012-06-19 TC 290 EN ISO 14253-1:1998 /prA 1:2012 Geometrical Product Specifications (GPS) Inspection by measurement of workpieces and measuring equipment Part 1: Decision rules for proving conformance or non-conformance with specifications (ISO 14253-1:1998/DAM 1:2012) Data Limite: 2012-07-02 TC 290 prEN ISO 16610-1:2012 Geometrical product specifications (GPS) Filtration Part 1: Overview and basic concepts (ISO/DIS 16610-1:2012) Data Limite: 2012-10-10 TC 290 prEN ISO 16610-20:2012 Geometrical product specifications (GPS) Filtration Part 20: Linear profile filters: Basic concepts (ISO/DIS 16610-20:2012) Data Limite: 2012-10-10 TC 290 prEN ISO 16610-21:2012 Geometrical product specifications (GPS) Filtration Part 21: Linear profile filters: Gaussian filters (ISO 16610-21:2011) Data Limite: 2012-06-12 TC 290 prEN ISO 16610-22:2012 Geometrical product specifications (GPS) Filtration Part 22: Linear profile filters: Spline filters (ISO/DIS 16610-22:2012)



Data Limite: 2012-10-10 TC 290 prEN ISO 16610-29:2012 Geometrical product specifications (GPS) Filtration Part 29: Linear profile filters: Spline wavelets (ISO/DIS 16610-29:2012) Data Limite: 2012-10-10 TC 290 prEN ISO 16610-40:2012 Geometrical product specifications (GPS) Filtration Part 40: Morphological profile filters: Basic concepts (ISO/DIS 16610-40:2012) Data Limite: 2012-10-10 TC 290 prEN ISO 16610-41:2012 Geometrical product specifications (GPS) Filtration Part 41: Morphological profile filters: Disk and horizontal line-segment filters (ISO/DIS 16610-41:2012) Data Limite: 2012-10-10 TC 290 prEN ISO 16610-49:2012 Geometrical product specifications (GPS) Filtration Part 49: Morphological profile filters: Scale space techniques (ISO/DIS 16610-49:2012) Data Limite: 2012-10-10 TC 290 prEN ISO 16610-71:2012 Geometrical product specifications (GPS) Filtration Part 71: Robust areal filters: Gaussian regression filters (ISO/DIS 16610-71:2012) Data Limite: 2012-08-29 TC 290 prEN ISO 16610-85:2012 Geometrical product specifications (GPS) Filtration Part 85: Areal morphological: Segmentation (ISO/DIS 16610-85:2012) Data Limite: 2012-08-29 TC 290 prEN ISO 25178-3:2012 Geometrical product specifications (GPS) Surface texture: Areal Part 3: Specification operators (ISO/FDIS 25178-3:2012) Data Limite: 2012-06-05 TC 292 prCEN/TR 16376:2012 Characterization of waste Overall guidance document for characterization of waste from the extractive industries Data Limite: 2012-05-23 TC 292 prEN 16023:2012 Characterization of waste Determination of gross calorific value and calculation of net calorific value Data Limite: 2012-06-19 TC 292 prEN 16377:2012 Characterization of waste Determination of Brominated Flame Retardants (BFR) in Solid Waste Data Limite: 2012-06-19 TC 296 prEN 12972:2012 Tanks for transport of dangerous goods Testing, inspection and marking of metallic tanks

Data Limite: 2012-08-22 TC 296 prEN 14025:2011 Tanks for the transport of dangerous goods Metallic pressure tanks Design and construction Data Limite: 2012-05-08 TC 298 prEN 12878:2012 Pigments for the colouring of building materials based on cement and/or lime Specifications and methods of test Data Limite: 2012-06-26 TC 301 prEN 12645:2012 Tyre pressure measuring instruments Apparatus for inspection of pressure and/or inflation of tyres for motor vehicles Metrology, requirements and testing Data Limite: 2012-07-02 TC 305 prEN 1839:2012 Determination of explosion limits of gases and vapours Data Limite: 2012-06-26 TC 305 prEN 14491:2012 Dust explosion venting protective systems Data Limite: 2012-05-29 TC 308 prCEN/TS 13714:2012 Characterization of sludges - l Sludge management in relation to use or disposal Data Limite: 2012-07-26 TC 308 prCEN/TS 16394:2012 Characterization of sludges Protocol for preparing synthetic suspensions Data Limite: 2012-06-15 TC 308 prEN 14742:2012 Characterization of sludges Laboratory chemical conditioning procedure Data Limite: 2012-07-23 TC 309 prCEN ISO/TR 16178:2012 Footwear Critical substances potentially present in footwear and footwear components (ISO/DTR 16178:2012) Data Limite: 2012-06-29 TC 309 prCEN ISO/TS 16179:2012 Footwear Critical substances potentially present in footwear and footwear components Determination of organotin compounds in footwear materials (ISO/DTS 16179:2012) Data Limite: 2012-07-05 TC 309 prCEN ISO/TS 16186:2012 Footwear Critical substances potentially present in footwear and footwear components Test method to quantitatively determine dimethyl fumarate (DMFU) in footwear materials (ISO/DTS 16186:2012) Data Limite: 2012-07-05



TC 309 prCEN/TR 16417:2012 Footwear Footwear industry guideline for substances of very high concern (Annex XIV of REACH) Data Limite: 2012-07-26 TC 309 prEN 14602:2012 Footwear Test method for the assessment of ecological criteria Data Limite: 2012-06-12 TC 309 prEN ISO 16187:2012 Footwear Test methods for uppers, lining and insocks Antibacterial activity (ISO/DIS 16187:2012) Data Limite: 2012-06-19 TC 312 prEN 12976-1:2012 Thermal solar systems and components Factory made systems Part 1: General requirements Data Limite: 2012-07-23 TC 312 prEN 12976-2:2012 Thermal solar systems and components Factory made systems Part 2: Test methods Data Limite: 2012-07-23 TC 312 prEN ISO 9806:2012 Solar energy Solar thermal collectors Test methods (ISO/DIS 9806:2012) Data Limite: 2012-09-19 TC 313 prEN 12547:2011 Centrifuges Common safety requirements Data Limite: 2012-05-15 TC 315 prEN 13200-1:2012 Spectator facilities Part 1: General characteristics for spectator viewing area Data Limite: 2012-06-12 TC 315 prEN 13200-6:2012 Spectator facilities Part 6 : Demountable (temporary) stands Data Limite: 2012-09-12 TC 315 prEN 13200-7:2011 Spectator facilities Part 7: Entry and exit elements and routes Data Limite: 2012-05-08 TC 327 prEN ISO 6498:2012 Animal feeding stuffs Guidelines for sample preparation (ISO/FDIS 6498:2012) Data Limite: 2012-05-01 TC 333 prEN 16054:2012 BMX bicycles Safety requirements and test methods Data Limite: 2012-06-26 TC 336 prEN 12597:2012 Bitumen and bituminous binders Terminology

Data Limite: 2012-09-12 TC 337 prCEN/TS 15518-4:2012 Winter maintenance equipment Road weather information systems Part 4: Test methods for stationary equipment Data Limite: 2012-06-29 TC 337 prEN 15429-2:2012 Sweepers Part 2: Performance requirements and test methods Data Limite: 2012-09-26 TC 338 prEN 16378:2012 Cereals Determination of Besatz in maize (Zea mays, L.) and sorghum (Sorghum bicolor, L.) Data Limite: 2012-07-09 TC 338 prEN ISO 11747:2012 Rice Determination of rice kernel resistance to extrusion after cooking (ISO/FDIS 11747:2012) Data Limite: 2012-07-10 TC 341 prEN ISO 22282-1:2011 Geotechnical investigation and testing Geohydraulic testing Part 1: General rules (ISO/FDIS 22282-1:2011) Data Limite: 2012-05-08 TC 341 prEN ISO 22282-2:2011 Geotechnical investigation and testing Geohydraulic testing Part 2: Water permeability tests in a borehole using open systems (ISO/FDIS 22282-2:2011) Data Limite: 2012-05-08 TC 341 prEN ISO 22282-3:2011 Geotechnical investigation and testing Geohydraulic testing Part 3: Water pressure tests in rock (ISO/FDIS 22282-3:2011) Data Limite: 2012-05-08 TC 341 prEN ISO 22282-4:2011 Geotechnical investigation and testing Geohydraulic testing Part 4: Pumping tests (ISO/FDIS 22282-4:2011) Data Limite: 2012-05-08 TC 341 prEN ISO 22282-5:2011 Geotechnical investigation and testing Geohydraulic testing Part 5: Infiltrometer tests (ISO/FDIS 22282-5:2011) Data Limite: 2012-05-08 TC 341 prEN ISO 22282-6:2011 Geotechnical investigation and testing Geohydraulic testing Part 6: Water permeability tests in a borehole using closed systems (ISO/FDIS 22282-6:2011) Data Limite: 2012-05-08 TC 345 prEN ISO 12782-1:2012 Soil quality Parameters for geochemical modelling of



leaching and speciation of constituents in soils and materials Part 1: Extraction of amorphous iron oxides and hydroxides with ascorbic acid (ISO/FDIS 12782-1:2012) Data Limite: 2012-05-15 TC 345 prEN ISO 12782-2:2012 Soil quality Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials Part 2: Extraction of crystalline iron oxides and hydroxides with dithionite (ISO/FDIS 12782-2:2012) Data Limite: 2012-05-15 TC 345 prEN ISO 12782-3:2012 Soil quality Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials Part 3: Extraction of aluminium oxides and hydroxides with ammonium oxalate/oxalic acid (ISO/FDIS 12782-3:2012) Data Limite: 2012-05-15 TC 345 prEN ISO 12782-4:2012 Soil quality Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials Part 4: Extraction of humic substances from solid samples (ISO/FDIS 12782-4:2012) Data Limite: 2012-05-15 TC 345 prEN ISO 12782-5:2012 Soil quality Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials Part 5: Extraction of humic substances from aqueous samples (ISO/FDIS 12782-5:2012) Data Limite: 2012-05-15 TC 345 prEN ISO 16387:2012 Soil quality Effects of pollutants on Enchytraeidae (Enchytraeus sp.) Determination of effects on reproduction (ISO/DIS 16387:2012) Data Limite: 2012-09-26 TC 345 prEN ISO 28258:2012 Soil quality Digital exchange of soil-related data (ISO/DIS 28258:2012) Data Limite: 2012-09-05 TC 346 prEN 16085:2012 Conservation of Cultural property Methodology for sampling from materials of cultural property General rules Data Limite: 2012-05-22 TC 346 prEN 16095:2012 Conservation of cultural property Condition recording for movable cultural heritage Data Limite: 2012-05-22 TC 346 prEN 16096:2012 Conservation of cultural property Condition survey and report of built cultural heritage Data Limite: 2012-05-22

TC 347 prEN 16274:2012 Methods for analysis of allergens Quantification of suspected fragrance allergens in consumer products Step 1: GC analysis of ready-to-inject sample Data Limite: 2012-07-03 TC 348 prEN 15221-7:2012 Facility Management Part 7: Guidelines for Performance Benchmarking Data Limite: 2012-07-03 TC 349 prEN 15651-1:2012 Sealants for non-structural use in joints in buildings and pedestrian walkways Part 1: Sealants for facade elements Data Limite: 2012-07-09 TC 349 prEN 15651-2:2012 Sealants for non-structural use in joints in buildings and pedestrian walkways Part 2: Sealants for glazing Data Limite: 2012-07-09 TC 349 prEN 15651-3:2012 Sealants for non-structural use in joints in buildings and pedestrian walkways Part 3: Sealants for sanitary joints Data Limite: 2012-07-09 TC 349 prEN 15651-4:2012 Sealants for non-structural use in joints in buildings and pedestrian walkways Part 4: Sealants for pedestrian walkways Data Limite: 2012-07-09 TC 349 prEN 15651-5:2012 Sealants for non-structural use in joints in buildings and pedestrian walkways Part 5: Evaluation of conformity and marking Data Limite: 2012-06-26 TC 351 prCEN/TR 16410:2012 Construction products Assessment of release of dangerous substances - Barriers to use Extension to CEN/TR 15855 Barriers to trade Data Limite: 2012-07-12 TC 352 prCEN ISO/TR 11811:2012 Nanotechnologies Guidance on methods for nano- and microtribology measurements (ISO/DTR 11811:2012) Data Limite: 2012-06-15 TC 353 prEN 16425:2012 Simple Publishing Interface Data Limite: 2012-09-19 TC 353 prEN 16426:2012 Simple Query Interface Data Limite: 2012-09-19 TC 361 EN 15814:2011 /prA 1:2012 Polymer modified bituminous thick coatings for waterproofing Definitions and requirements



Data Limite: 2012-07-19 TC 362 prEN 15224:2012 Health care services Quality management systems Requirements based on EN ISO 9001:2008 Data Limite: 2012-06-12 TC 364 EN 14988-1:2006 /prA 1:2012 Children's high chairs Part 1: Safety requirements Data Limite: 2012-05-22 TC 364 EN 14988-2:2006 /prA 2:2012 Children's high chairs Part 2: Test methods Data Limite: 2012-05-22 TC 379 prCEN/TR 16412:2012 Supply chain security (SCS) Good practice guide for small and medium sized operators Data Limite: 2012-07-12 TC 383 prEN 16214-1:2012 Sustainability criteria for the production of biofuels and bioliquids for energy applications Principles, criteria, indicators and verifiers Part 1: Terminology Data Limite: 2012-06-19 TC 383 prEN 16214-3:2012 Sustainability criteria for the production of biofuels and bioliquids for energy applications Principles, criteria, indicators and verifiers Part 3: Biodiversity and environmental aspects related to nature protection purposes Data Limite: 2012-06-19 TC CST01 prEN ISO 7840:2012 Small craft Fire-resistant fuel hoses (ISO/DIS 7840:2012) Data Limite: 2012-08-22 TC CST01 prEN ISO 8469:2012 Small craft Non-fire-resistant fuel hoses (ISO/DIS 8469:2012) Data Limite: 2012-08-22 TC CSC01 prEN ISO 9235:2012 Aromatic natural raw materials Vocabulary (ISO/DIS 9235:2012) Data Limite: 2012-09-26 TC CST01 prEN ISO 10088:2012 Small craft Permanently installed fuel systems (ISO/DIS 10088:2012) Data Limite: 2012-09-12 TC CSF01 prEN ISO 10209:2012 Technical product documentation Vocabulary Terms relating to technical drawings, product definition and related documentation (ISO/FDIS 10209:2012) Data Limite: 2012-05-29

TC CST01 EN ISO 16147:2002 /prA 1:2012 Small craft Inboard diesel engines - Engine-mounted fuel and electrical components Amendment 1 (ISO 16147:2002/DAM 1:2012) Data Limite: 2012-08-15 TC CSB02 prEN ISO 6927:2012 Buildings and civil engineering works Sealants Vocabulary (ISO/FDIS 6927:2012) Data Limite: 2012-06-05 TC CSM11 prEN ISO 2739:2012 Sintered metal bushings Determination of radial crushing strength (ISO/FDIS 2739:2012) Data Limite: 2012-05-15 TC CSM11 prEN ISO 13517:2012 Metallic powders Determination of flowrate by means of a calibrated funnel (Gustavsson flowmeter) (ISO/DIS 13517:2012) Data Limite: 2012-08-01 TC CSM11 prEN ISO 13944:2012 Lubricated metal-powder mixes Determination of lubricant content Soxhlet extraction method (ISO/FDIS 13944:2012) Data Limite: 2012-07-12 TC CSS12 prCEN/TR 16388:2012 Gas-Specific Environmental Document Guideline for incorporating within standards to minimize the environmental impact of gas infrastructure across the whole life cycle Data Limite: 2012-06-08 TC CSF16 prEN ISO 7010:2011 Graphical symbols Safety colours and safety signs Registered safety signs (ISO 7010:2011) Data Limite: 2012-05-22 TC CSN21 prEN ISO 13734:2012 Natural gas Organic components used as odorants Requirements and test methods (ISO/DIS 13734:2012) Data Limite: 2012-07-23 TC CSS26 prEN ISO 14031:2012 Environmental management Environmental performance evaluation Guidelines (ISO/DIS 14031:2012) Data Limite: 2012-06-12 TC CSS27 prCEN/TS 15522-2:2012 Oil spill identification Waterborne petroleum and petroleum products Part 2: Analytical methodology and interpretation of results based on GC-FID and GC-MS low resolution analyses Data Limite: 2012-07-12 TC ECISS/100 prEN ISO 377:2012 Steel and steel products Location and preparation of



samples and test pieces for mechanical testing (ISO/DIS 377:2012) Data Limite: 2012-09-12 TC ECISS/101 prEN ISO 14577-1:2012 Metallic materials Instrumented indentation test for hardness and materials parameters Part 1: Test method (ISO/DIS 14577-1:2012) Data Limite: 2012-08-29 TC ECISS/101 prEN ISO 14577-2:2012 Metallic materials Instrumented indentation test for hardness and materials parameters Part 2: Verification and calibration of testing machines (ISO/DIS 14577-2:2012) Data Limite: 2012-08-29 TC ECISS/102 prCEN/TR 10261:2012 Iron and steel European standards for the determination of chemical composition Data Limite: 2012-05-09 TC ECISS/102 prCEN/TR 10317:2012 European certified reference materials (EURONORM-CRMs) for the determination of the chemical composition of iron and steel products prepared under the auspices of the European Committee for Iron and Steel Standardization (ECISS) Data Limite: 2012-07-26 TC ECISS/102 prCEN/TR 10350:2012 Analysis of steels and irons Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials Data Limite: 2012-06-15 TC ECISS/102 prEN 10071:2012 Chemical analysis of ferrous products Determination of manganese in steels and irons Electrometric titration method Data Limite: 2012-07-16 TC ECISS/102 prEN 10200:2012 Chemical analysis of ferrous materials Determination of boron in steel Spectrophotometric method Data Limite: 2012-07-16 TC ECISS/105 prEN 10088-1:2011 Stainless steels Part 1: List of stainless steels Data Limite: 2012-05-15 TC ECISS/105 prEN 10088-2:2011 Stainless steels Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes Data Limite: 2012-05-15 TC ECISS/105 prEN 10088-3:2011 Stainless steels Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes Data Limite: 2012-05-15

TC ECISS/108 prEN 10107:2012 Grain-oriented electrical steel strip and sheet delivered in the fully processed state Data Limite: 2012-08-22 TC ECISS/110 prEN 10293:2012 Steel casting and forgings Steel castings for general engineering uses Data Limite: 2012-06-19 TC ECISS/110 prEN 10357:2012 Austenitic, austenitic-ferritic and ferritic longitudinally welded stainless steel tubes for the food and chemical industry Data Limite: 2012-07-02 TC ECISS/110 prEN 10358:2012 Unalloyed steel plumbing fittings Fittings with press ends for unalloyed steel tubes Data Limite: 2012-08-08 TC ECISS/110 prEN ISO 1179-1:2012 Connections for general use and fluid power Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Part 1: Threaded ports (ISO/DIS 1179-1:2012) Data Limite: 2012-09-19 TC ECISS/110 prEN ISO 1179-2:2012 Connections for general use and fluid power Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) (ISO/DIS 1179-2:2012) Data Limite: 2012-09-19 TC ECISS/110 prEN ISO 14577-3:2012 Metallic materials Instrumented indentation test for hardness and materials parameters Part 3: Calibration of reference blocks (ISO/DIS 14577-3:2012) Data Limite: 2012-08-29 TC AECMA prEN 3351:2012 Aerospace series Titanium alloy Ti-4Al-4Mo-2Sn - Solution treated and aged Forgings - De <= 150 mm Data Limite: 2012-05-22 TC AECMA prEN 4500-001:2012 Aerospace series Metallic materials - Rules for drafting and presentation of material standards Part 001: General rules Data Limite: 2012-05-22 TC AECMA prEN 4500-003:2012 Aerospace series Metallic materials - Rules for drafting and presentation of material standards Part 003: Specific rules for heat resisting alloys Data Limite: 2012-05-22 TC AECMA prEN 4500-004:2012 Aerospace series Metallic materials - Rules for drafting and presentation of material standards Part 004: Specific



rules for titanium and titanium alloys Data Limite: 2012-05-22 TC AECMA prEN 4500-005:2012 Aerospace series Metallic materials - Rules for drafting and presentation of material standards Part 005: Specific rules for steels Data Limite: 2012-05-22



5.2 Questionários preliminares Lista de documentos de referência (RD) objeto de Questionários Preliminares (PQ), com vista à sua aceitação como normas europeias.

LISTA VAZIA



5.3 Comités Técnicos do CEN Lista dos Comités Técnicos do Comité Europeu de Normalização (CEN) em relação aos quais não existe ONS (Organismo de Normalização Setorial) ou CT (Comissão Técnica) e cujos processos se encontram disponíveis para consulta no IPQ.

AECMA

European association of aerospace manufacturers CEN/TC 12 Materials, equipment and offshore structures for petroleum and natural gas industries

CEN/TC 44 Household refrigerating appliances and commercial refrigerated cabinets CEN/TC 50

Lighting columns and spigots CEN/TC 53 Temporary works equipment CEN/TC 87

Gas fuelled smokers lighters CEN/TC 88 Thermal insulating materials and products

CEN/TC 89 Thermal performance of buildings and building components CEN/TC 99 Wallcoverings

CEN/TC 105 Valves and fittings to equip radiators CEN/TC 107 Pre-fabricated district heating pipe systems

CEN/TC 113 Heat pumps and air conditioning units CEN/TC 123 Lasers and laser related equipment

CEN/TC 125 Masonry CEN/TC 128 Roof covering products for discontinuous

laying and products for wall cladding

CEN/TC 130 Space heating appliances without integral heat sources CEN/TC 135 Execution of steel structures

CEN/TC 136 Sports, playground and other recreational equipment CEN/TC 145

Rubber and plastics machines - Safety CEN/TC 146 Packaging machines - Safety CEN/TC 148

Continuous handling equipment and systems - Safety CEN/TC 149 Rail-dependent storage and retrieval

equipment - Safety CEN/TC 150 Industrial trucks - Safety CEN/TC 151

Construction equipment and building material machines - Safety CEN/TC 152 Fairground and amusement park machinery and structures - Safety

CEN/TC 153 Food processing machinery - Safety and hygiene specifications CEN/TC 156

Ventilation for buildings CEN/TC 163 Sanitary appliances



CEN/TC 166 Chimneys CEN/TC 167 Structural bearings

CEN/TC 169 Lighting applications CEN/TC 171 Heat cost allocation

CEN/TC 173 Brushware CEN/TC 176 Heat meters

CEN/TC 177 Prefabricated reinforced components of autoclaved aerated concrete or light-weight aggregate concrete with open structure

CEN/TC 178 Paving units and kerbs CEN/TC 182 Refrigerating systems, safety and environmental requirements

CEN/TC 183 Waste management CEN/TC 186 Industrial thermoprocessing - Safety

CEN/TC 188 Conveyor belts CEN/TC 189 Geotextiles and geotextile-related products

CEN/TC 190 Foundry technology CEN/TC 193

Adhesives CEN/TC 195 Air filters for general air cleaning

CEN/TC 196 Machines for underground mines - Safety

CEN/TC 197 Pumps CEN/TC 198 Printing and paper machinery - Safety

CEN/TC 200 Tannery machinery - Safety CEN/TC 201 Leather and imitation leather goods and footwear manufacturing machinery - Safety

CEN/TC 202 Foundry machinery CEN/TC 216

Chemical disinfectants and antiseptics CEN/TC 217 Surfaces for sport areas CEN/TC 219

Cathodic protection CEN/TC 221 Metallic shop-fabricated tanks CEN/TC 222

Feather and down as filling material for any article, as well as finished articles filled with feather and down CEN/TC 225 Bar coding

CEN/TC 226 Road equipment CEN/TC 232 Compressors - Safety

CEN/TC 239 Rescue systems CEN/TC 241

Gypsum and gypsum based products CEN/TC 242 Safety requirements for passenger transportation by rope

CEN/TC 245 Leisure accommodation vehicles



CEN/TC 247 Controls for mechanical building services CEN/TC 253 Self adhesive tapes

CEN/TC 256 Railway applications CEN/TC 259 Medical alarms and signals

CEN/TC 263 Secure storage of cash, valuables and data media CEN/TC 270

Internal combustion engines CEN/TC 271 Surface treatment equipment - Safety CEN/TC 273

Logistics CEN/TC 274 Aircraft ground support equipment CEN/TC 277

Suspended ceilings CEN/TC 278 Road transport and traffic telematics CEN/TC 279

Value management - Value analysis, functional analysis CEN/TC 280 Offshore containers

CEN/TC 283 Precious metals - Application in jewellery and associated products CEN/TC 288

Execution of special geotechnical works CEN/TC 289 Leather CEN/TC 290

Dimensional and geometrical product specification and verification

CEN/TC 291 Self-service shopping trolleys CEN/TC 293 Technical aids for disabled persons

CEN/TC 296 Tanks for transport of dangerous goods CEN/TC 297 Free-standing industrial chimneys

CEN/TC 301 Electrically propelled road vehicles CEN/TC 303 Floor screeds and in-situ floorings in buildings

CEN/TC 305 Potencially explosive atmospheres - Explosion prevention and protection CEN/TC 309

Footwear CEN/TC 310 Advanced manufacturing technologies CEN/TC 313

Industrial centrifugs - Safety requirements (provisional) CEN/TC 314 Mastic asphalt for waterproofing

CEN/TC 315 Spectator accomodations CEN/TC 317 Derivates from coal from pyrolisis CEN/TC 318

Hydrometry CEN/TC 320 Transportation services

CEN/TC 322 Equipment for metal production and rolling mills - Safety requirements CEN/TC 323

Raised access floors CEN/TC 324 Castors and wheels



CEN/TC 325 Prevention of crime by urban planning and building design (provisional) CEN/TC 326

Gas supply for natural gas vehicles (NGV) CEN/TC 328 Standard measuring system for cleaning performance

CEN/TC 329 Criteria for describing tourist services in objective tourist information systems CEN/TC 332

Laboratory equipment (provisional)



6. Projetos de normas e propostas de estudo de novas normas do Comité Europeu de Normalização Eletrotécnica (CENELEC)

Os projetos de normas e propostas de estudo de novas normas estão organizadas por Comités Técnicos do CENELEC.

6.1 Projetos em inquérito público

Para cada referência menciona-se a designação codificada, o título e a data limite para a apresentação de comentários. BTTF 132-2 prEN 50156-1:2012 Electrical equipment for furnances and ancillary equipment Part 1: Requirements for application design and installation Data Limite: 2012-10-05 BTWG 112-1 EN 60309-1:1999 /FprA 2:2012 Plugs, socket-outlets and couplers for industrial purposes Part 1: General requirements (IEC 60309-1:1999/A2:201X) Data Limite: 2012-05-11 SC 9XB prEN 50125-1:2012 Railway applications - Environmental conditions for equipment Part 1: Equipment on board rolling stock Data Limite: 2012-09-07 SC 9XB prEN 50153:2012 Railway applications - Rolling stock - Protective provisions relating to electrical hazards Data Limite: 2012-09-14 SC 9XB prEN 50343:2012 Railway applications - Rolling stock - Rules for installation of cabling Data Limite: 2012-09-07 SC 9XC prEN 50526-2:2012 Railway Applications - Fixed Installations - D.C. surge arresters and voltage limiting devices Part 2: Voltage limiting devices Data Limite: 2012-09-07 SC 9XA prEN 50578:2012 Railways applications - Direct current signalling relays Data Limite: 2012-07-27 SC 9XB FprEN 61881-2:2012 Railway applications - Rolling stock equipment - Capacitors for power electronics Part 2: Aluminium electrolytic capacitors with non solid electrolyte (IEC 61881-2:201X) Data Limite: 2012-07-06 SC 9XB FprEN 61881-3:2012 Railway applications - Rolling stock equipment - Capacitors for power electronics Part 3: Electric double-layer capacitors (IEC 61881-3:201X) Data Limite: 2012-07-06

SC 46XC prEN 50407-2:2012 Multi-pair cables used in high bit rate digital access telecommunication networks Part 2: Indoor multi-pair/quad cables for installation in Multi Dwelling Units shaft supporting universal services, xDSL and applications up to 100 MBits over IP Data Limite: 2012-09-21 SC 205A prEN 50412-4:2012 Power line communication apparatus and systems used in low-voltage installations in the frequency range 1,6 MHz to 30 MHz Part 4:Low rate wide band services (LRWBS) operating between 2 MHz and MHz - Channel allocations Data Limite: 2012-09-07 SC 31-8 EN 50177:2009 /FprA A:2012 Stationary electrostatic application equipment for ignitable coating powder - Safety requirements Data Limite: 2012-06-15 SR 3 FprEN 60848:2011 GRAFCET specification language for sequential function charts (IEC 60848:201X) Data Limite: 2012-05-25 SR 15 FprEN 60684-3-214:2012 Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheet 214: Heat-shrinkable, polyolefin sleeving, not flame-retarded, shrink ratio 3:1 - Thick and medium wall (IEC 60684-3-214:201X) Data Limite: 2012-09-07 SR 15 FprEN 62677-1:2012 Heat shrinkable low and medium voltage moulded shapes Part 1: General requirements (IEC 62677-1:201X) Data Limite: 2012-09-07 SR 17D FprEN 61439-7:2011 Low-voltage switchgear and controlgear assemblies Part 7: Assemblies for specific installations at public sites such as marinas, camping sites, market squares and similar applications and for charging stations for electrical vehicles (IEC 61439-7:201X) Data Limite: 2012-05-11



SR 27 FprEN 60519-10:2012 Safety in electroheating installations Part 10: Particular requirements for electrical resistance trace heating systems for industrial and commercial applications (IEC 60519-10:201X) Data Limite: 2012-07-13 SR 27 FprEN 60519-12:2012 Safety in electroheating installations Part 12: Particular requirements for infrared electroheating installations (IEC 60519-12:201X) Data Limite: 2012-07-27 SR 32C EN 60127-4:2005 /FprA 2:2012 Miniature fuses Part 4: Universal modular fuse-links (UMF) - Through-hole and surface mount types (IEC 60127-4:2005/A2:201X) Data Limite: 2012-07-13 SR 32C FprEN 60127-7:2012 Miniature fuses Part 7: Miniature fuse-links for special applications (IEC 60127-7:201X) Data Limite: 2012-09-07 SR 32B FprHD 60269-2:2007 Low-voltage fuses Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to K (IEC 60269-2:201X) Data Limite: 2012-09-07 SR 32B HD 60269-3:2010 /FprA 1:2012 Low-voltage fuses Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications) - Examples of standardized systems of fuses A to F (IEC 60269-3:2010/A1:201X) Data Limite: 2012-09-07 SR 33 FprEN 60358-1:2012 Coupling capacitors and capacitor dividers Part 1: Common clauses (IEC 60358-1:201X) Data Limite: 2012-05-11 SR 33 FprEN 60358-2:2012 Coupling capacitors and capacitor dividers Part 2: AC or DC single-phase coupling capacitor connected between line and ground for power line carrier-frequency (PLC) application (IEC 60358-2:201X) Data Limite: 2012-07-06 SR 33 FprEN 60831-1:2012 Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1000 V Part 1: General - Performance, testing and rating- Safety requirements - Guide for installation and operation (IEC 60831-1:201X) Data Limite: 2012-07-06

SR 33 FprEN 60831-2:2012 Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1000 V Part 2: Ageing test, self-helaing test and destruction test (IEC 60831-2:201X) Data Limite: 2012-06-29 SR 33 FprEN 62146-1:2012 Grading capacitors for high-voltage alternating current circuit-breakers (IEC 62146-1:201X) Data Limite: 2012-07-06 SR 34A FprEN 60432-3:2012 Incandescent lamps - Safety specifications Part 3:Tungsten-halogen lamps (non-vehicle) (IEC 60432-3:20IX) Data Limite: 2012-06-08 SR 34A EN 60809:1996 /FprA 5:2012 Lamps for road vehicles - Dimensional, electrical and luminous requirements (IEC 60809:1995/A5:201X) Data Limite: 2012-07-06 SR 34A EN 60968:1990 /FprA 3:2011 Self-ballasted lamps for general lighting services - Safety requirements (IEC 60968:1988/A3: 201X) Data Limite: 2012-05-18 SR 34A EN 61195:1999 /FprA 1:2011 Double-capped fluorescent lamps - Safety specifications (IEC 61195:1999/A1:201X) Data Limite: 2012-05-18 SR 34A EN 61199:2011 /FprA 1:2011 Single-capped fluorescent lamps - Safety specifications (IEC 61199:2011/A1:201X) Data Limite: 2012-05-18 SR 34A EN 61231:2010 /FprA 1:2012 International lamp coding system (ILCOS) (IEC 61231:2010/A1:201X) Data Limite: 2012-08-03 SR 34A EN 61549:2003 /FprA 3:2012 Miscellaneous lamps (IEC 61549:2003/A3:201X) Data Limite: 2012-06-08 SR 35 FprEN 62281:2011 Safety of primary and secondary lithium cells and batteries during transport (IEC 62281:201X) Data Limite: 2012-05-11 SR 36 FprEN 62217:2012 Polymeric HV insulators for indoor and outdoor use - General definitions, test methods and acceptance criteria (IEC 62217:201X) Data Limite: 2012-07-06



SR 38 FprEN 61869-4:2012 Instrument transformers Part 4: Combined transformers (IEC 61869-4:201X) Data Limite: 2012-09-14 SR 40 FprEN 60286-4:2012 Packaging of components for automatic handling Part 4: Stick magazines for electronic components encapsulated in packages of different forms (IEC 60286-4:201X) Data Limite: 2012-09-07 SR 40 FprEN 60294:2012 Measurement of the dimensions of a cylindrical component with axial terminations (IEC 60294:201X) Data Limite: 2012-06-29 SR 40 FprEN 60301:2012 Preferred diameters of wire terminations of capacitors and resistors (IEC 60301:201X) Data Limite: 2012-06-29 SR 46 FprEN 62037-2:2012 Passive r.f. and microwave devices, intermodulation level measurement Part 2: Measurement of passive intermodulation in coaxial cable assemblies (IEC 62037-2:201X) Data Limite: 2012-05-18 SR 46 FprEN 62037-5:2012 Passive r.f. and microwave devices, intermodulation level measurement Part 5: Measurement of passive intermodulation in filters (IEC 62037-5:201X) Data Limite: 2012-05-18 SR 46 FprEN 62037-6:2012 Passive r.f. and microwave devices, intermodulation level measurement Part 6: Measurement of passive intermodulation in antennas (IEC 62037-6:201X) Data Limite: 2012-05-18 SR 47F FprEN 62047-11:2011 Semiconductor devices - Micro-electromechanical devices Part 11: Test method for Linear Thermal Expansion Coefficients of Freestanding MEMS materials (IEC 62047-11:201X) Data Limite: 2012-05-25 SR 47F FprEN 62047-18:2012 Semiconductor devices - Micro-electromechanical devices Part 18: Bend testing methods of thin film materials (IEC 62047-18:201X) Data Limite: 2012-08-03 SR 47F FprEN 62047-19:2012 Semiconductor devices - Micro-electromechanical devices Part 19: Electronic compasses (IEC 62047-19:201X) Data Limite: 2012-06-29

SR 47A FprEN 62132-8:2012 Integrated circuits - Measurement of electromagnetic immunity Part 8: Measurement of radiated immunity - IC stripline method (IEC 62132-8:201X) Data Limite: 2012-06-15 SR 47A FprEN 62215-3:2012 Integrated circuits - Measurement of impulse immunity Part 3: Non-synchronous transient injection method (IEC 62215-3:201X) Data Limite: 2012-08-03 SR 47 FprEN 62483:2012 Environmental acceptance requirements for tin whisker susceptibility of tin and tin alloy surface finishes (IEC 62483:201X) Data Limite: 2012-09-07 SR 48B EN 60352-2:2006 /FprA 1:2012 Solderless connections Part 2: Crimped connections - General requirements, test methods and practical guidance (IEC 60352-2:2006/A1:201X) Data Limite: 2012-10-05 SR 48B FprEN 60512-99-001:2012 Connectors for electronic equipment - Test and measurements Part 99-001: Test schedule for engaging and separating connectors under electrical load - Test 99a: Connectors used in twisted pair communication cabling with remote power (IEC 60512-99-001:201X) Data Limite: 2012-05-18 SR 48D FprEN 60917-2-5:2012 Modular order for the development of mechanical structures for electronic equipment practices Part 2-5: Cabinet interface dimensions for miscellaneous equipment (IEC 60917-2-5:201X) Data Limite: 2012-05-04 SR 48D FprEN 61587-3:2012 Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 Part 3: Electromagnetic shielding performance tests for cabinets, racks and subracks (IEC 61587-3:201X) Data Limite: 2012-09-07 SR 48D FprEN 61587-4:2012 Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 Part 4: Combination of performance levels for modular cabinets (IEC 61587-4:201X) Data Limite: 2012-06-08 SR 49 FprEN 62575-2:2012 Radio frequency (RFbulk acoustic wave (BAW) filters of assessed quality Part 2 :Guide to the use (IEC 62575-2:201X) Data Limite: 2012-07-06



SR 56 FprEN 62673:2012 Methodology for communication network dependability assessment and assurance (IEC 62673:201X) Data Limite: 2012-09-07 SR 65A FprEN 61326-1:2012 Electrical equipment for measurement, control and laboratory use - EMC requirements Part 1: General requirements (IEC 61326-1:201X) Data Limite: 2012-06-08 SR 65A FprEN 61326-2-3:2012 Electrical equipment for measurement, control and laboratory use - EMC requirements Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning (IEC 61326-2-3:201X) Data Limite: 2012-06-08 SR 65A FprEN 61326-2-4:2012 Electrical equipment for measurement, control and laboratory use - EMC requirements Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9 (IEC 61326-2-4:201X) (IEC 61326-2-4:201X) Data Limite: 2012-06-08 SR 65A FprEN 61326-2-6:2012 Electrical equipment for measurement, control and laboratory use - EMC requirements Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment (IEC 61326-2-6:201X) Data Limite: 2012-06-08 SR 66 FprEN 61010-2-091:2012 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-091: Particular requirements for cabinet x-ray systems (IEC 61010-2-091:201X) Data Limite: 2012-05-18 SR 80 FprEN 61924-2:2011 Maritime navigation and radiocommunication equipment and systems - Integrated navigation systems (INS) Part 2: Modular structure for INS - Operational and performance requirements, methods of testing and required test results (IEC 61924-2:201X) Data Limite: 2012-05-11 SR 80 FprEN 61993-2:2012 Maritime navigation and radiocommunication equipment and systems - Automatic Identification Systems (AIS) Part 2: Class A shipborne equipment of the automatic identification system (AIS) - Operational and performance requirements, methods of test and required test results (IEC 61993-2:201X) Data Limite: 2012-06-29

SR 80 FprEN 61993-2:2012 Maritime navigation and radiocommunication equipment and systems - Automatic Identification Systems (AIS) Part 2: Class A shipborne equipment of the automatic identification system (AIS) - Operational and performance requirements, methods of test and required test results (IEC 61993-2:201X) Data Limite: 2012-07-13 SR 80 FprEN 62287-2:2012 Maritime navigation and radiocommunication equipment and systems - Class B shipborne equipment fo the Automatic Identification System (AIS) Part 2: Self-organising time division multiple access (SOTDMA) techniques (IEC 62287-2:201X) Data Limite: 2012-09-07 SR 80 FprEN 62729:2012 Maritime navigation and radiocommunication equipment and systems - Shipborne equipment for long-range identification and tracking (LRIT) - Performance requirements (IEC 62729:201X) Data Limite: 2012-05-18 SR 85 FprEN 60469:2012 Transitions, pulses and related waveforms - Terms, definitions and algorithms (IEC 60469:201X) Data Limite: 2012-06-22 SR 85 FprEN 62586-1:2012 Power quality measurement in power supply systems Part 1: Power Quality Instruments (PQI) (IEC 62586-1:201X) Data Limite: 2012-09-14 SR 85 FprEN 62586-2:2012 Power quality measurement in power supply systems Part 2: Functional tests and uncertainty requirements (IEC 62586-2:201X) Data Limite: 2012-09-14 SR 85 FprEN 62638:2012 Recurrent test and test after repair (IEC 62638:201X) Data Limite: 2012-06-22 SR 86C FprEN 61280-1-1:2012 Fibre optic communication subsystem basic test procedures Part 1-1: Test procedures for general communication subsystems - Transmitter output optical power measurement for single-mode optical fibre cable (IEC 61280-1-1:201X) Data Limite: 2012-09-14 SR 86C FprEN 62150-3:2012 Fibre optic active components and devices - Test and measurement procedures Part 3: Optical power variation induced by mechanical disturbance in optical receptacles and transceiver interfaces (IEC 62150-3:201X) Data Limite: 2012-06-01



SR 86C FprEN 62343:2012 Dynamic modules and devices - General and guidance (IEC 62343:201X) Data Limite: 2012-07-13 SR 89 FprEN 60695-9-1:2012 Fire hazard testing Part 9-1: Surface spread of flame - General guidance (IEC 60695-9-1:201X) Data Limite: 2012-08-24 SR 89 FprEN 60695-11-3:2012 Fire hazard testing Part 11-3: Test flames - 500 W flamesm: Apparatus and confirmational test methods (IEC 60695-11-3:201X) Data Limite: 2012-07-06 SR 90 FprEN 61788-5:2012 Superconductivity Part 5: Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires (IEC 61788-5:201X) Data Limite: 2012-09-07 SR 90 FprEN 61788-12:2012 Superconductivity Part 12: Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires (IEC 61788-12:201X) Data Limite: 2012-09-07 SR 90 FprEN 61788-18:2012 Superconductivity Part 18: Mechanical properties measurement - Room temperature tensile test of Ag- and/or Ag alloy-sheathedBi-2223 and Bi-2212 composite superconductors (IEC 61788-18:201X) Data Limite: 2012-10-05 SR 91 FprEN 62739-1:2012 Test method for erosion of wave soldering equipment using molten lead-free solder alloy Part 1: Erosion test method for metal materials without surface processing (IEC 62739-1:201X) Data Limite: 2012-08-10 SR 105 FprEN 62282-3-201:2012 Fuel cell technologies Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systems (IEC 62282-3-201:201X) Data Limite: 2012-06-15 SR 105 FprEN 62282-6-200:2012 Fuel cell technologies Part 6-200: Micro fuel cell power systems - Performance test methods (IEC 62282-6-200:201X) Data Limite: 2012-07-06 SR 110 FprEN 61747-2-1:2012 Liquid crystal display devices Part 2-1: Passive matrix monochrome LCD modules - Blank detail specification

(IEC 61747-2-1:201X) Data Limite: 2012-09-14 SR 110 FprEN 61747-4:2011 Liquid crystal display devices Part 4: Liquid crystal display modules and cells - Essential ratings and characteristics (IEC 61747-4:201X) Data Limite: 2012-05-11 SR 110 FprEN 61747-30-1:2012 Liquid crystal display devices Part 30-1: Measuring methods for liquid crystal display modules - Transmissive type (IEC 61747-30-1:201X) Data Limite: 2012-05-25 SR 110 FprEN 62679-3-2:2012 Electronic paper display Part 3-2 : Measuring methods - Electro-optical (IEC 62679-3-2:201X) Data Limite: 2012-06-15 SR 112 FprEN 60216-1:2012 Electrical insulating materials - Thermal Endurance Properties Part 1: Ageing procedures and evaluation of test results (IEC 60216-1:201X) Data Limite: 2012-09-14 SR 112 FprEN 60216-8:2012 Electrical insulating materials - Thermal endurance properties Part 8: Instructions for calculating thermal endurance characteristics using simplified procedures (IEC 60216-8:201X) Data Limite: 2012-07-06 SR 112 FprEN 60243-1:2011 Electrical strength of insulating materials - Test methods Part 1: Tests at power frequencies (IEC 60243-1:201X) Data Limite: 2012-05-18 SR 112 prEN 60493-1:2012 Guide for the statistical analysis of ageing test data Part 1: Methods based onmean values of normally distributed test results (IEC 60493-1:2011) Data Limite: 2012-06-29 SR 112 FprEN 60544-2:2012 Electrical insulating materials - Guide for determining of the effects of ionizing radiation on insulating materials Part 2: Procedures for irradiation and test (IEC 60544-2:201X) Data Limite: 2012-06-22 SR 112 FprEN 62068:2011 Electrical insulating materials and systems - General method of evaluation of electrical endurance under repetitive voltage impulses (IEC 62068:201X) Data Limite: 2012-05-18



TC 2 FprEN 60034-18-31:2012 Rotating electrical machines Part 18-31: Functional evaluation of insulation systems - Test procedures for form-wound windings - Thermal evaluation and classification of insulation systems used in rotating machines (IEC 60034-18-31:201X) Data Limite: 2012-06-01 TC 2 FprEN 60034-18-34:2012 Rotating electrical machines Part 18-34: Functional evaluation of insulation systems - Test procedures for form-wound windings - Evaluation of thermomechanical endurance of insulation systems (IEC 60034-18-34:201X) Data Limite: 2012-05-04 TC 9X FprEN 61375-2-5:2012 Electronic railway equipment - Train backbone Part 2-5: Ethernet Train Backbone (IEC 61375-2-5:201X) Data Limite: 2012-06-29 TC 9X FprEN 62625-1:2012 Electronic railway equipment - On board driving data recording system Part 1: System specification (IEC 62625-1:201X) Data Limite: 2012-08-03 TC 14 FprEN 60076-3:2012 Power transformers Part 3: Insulation levels, dielectric tests and external clearances in air (IEC 60076-3:201X) Data Limite: 2012-08-10 TC 14 FprEN 60076-14:2012 Power transformers Part 14: Liquid-immersed power transformers using high-temperature insulation materials (IEC 60076-14:201X) Data Limite: 2012-09-21 TC 14 FprEN 60076-18:2012 Power transformers Part 18: Measurement of frequency response (IEC 60076-18:201X) Data Limite: 2012-06-22 TC 17B EN 60947-4-1:2010 /FprA 1:2012 Low-voltage switchgear and controlgear Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters (IEC 60947-4-1:2009/A1:201X) Data Limite: 2012-05-11 TC 17B FprEN 60947-5-3:2012 Low-voltage switchgear and controlgear Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDDB) (IEC 60947-5-3:201X) Data Limite: 2012-08-17 TC 17B FprEN 60947-7-4:2012 Low-voltage switchgear and controlgear Part 7-4:

Ancillary equipment - PCB terminal blocks for copper conductors (IEC 60947-7-4:201X) Data Limite: 2012-08-03 TC 17AC FprEN 62271-4:2012 High voltage switchgear and controlgear Part 4 - Handling procedures for sulphur hexafluoride (SF6) (IEC 62271-4:201X) Data Limite: 2012-09-07 TC 17AC EN 62271-102:2002 /FprA 2:2011 High-voltage switchgear and controlgear Part 102: Alternating current disconnectors and earthing switches (IEC 62271-102:2001/A2) Data Limite: 2012-05-25 TC 17AC FprEN 62271-107:2012 High-voltage switchgear and controlgear Part 107: Alternating current fused circuit-switchers for rated voltages above 1 kV up to and including 52 kV (IEC 62271-107:201X) Data Limite: 2012-05-04 TC 17AC FprEN 62271-112:2012 High-voltage switchgear and controlgear Part 112: Alternating current high-speed earthing switches for secondary arc extinction on transmission lines (IEC 62271-112:201X) Data Limite: 2012-09-07 TC 20 prEN 50575:2012 Power, control and communication cables - Cables for general applications in construction works subject to reaction to fire requirements Data Limite: 2012-06-15 TC 20 prEN 50577:2012 Electric cables - Fire resistence test for unprotected electric cables (P classification) Data Limite: 2012-07-20 TC 20 EN 61034-1:2005 /FprA 1:2012 Measurement of smoke density of cables burning under defined conditions Part 1: Test apparatus (IEC 61034-1:2005/A1:201X) Data Limite: 2012-07-06 TC 20 EN 61034-2:2005 /FprA 1:2012 Measurement of smoke density of cables burning under defined conditions Part 2:Test procedure and requirements (IEC 61034-2:2005/A1:201X) Data Limite: 2012-07-06 TC 21X FprEN 60952-1:2011 Aircraft batteries Part 1: General test requirements and performance levels (IEC 60952-1:201X) Data Limite: 2012-05-04 TC 21X FprEN 60952-2:2011 Aircraft batteries Part 2: Design and construction requirements



(IEC 60952-2:201X) Data Limite: 2012-05-04 TC 21X FprEN 60952-3:2011 Aircraft batteries Part 3: Products specification and declaration of design and performance (DDP) (IEC 60952-3:201X) Data Limite: 2012-05-04 TC 21X FprEN 61427-1:2012 Secondary cells and batteries for Renewable Energy Storage - General Requirements and methods of test Part 1: Photovoltaic Off grid application (IEC 61427-1:201X) Data Limite: 2012-07-27 TC 22X EN 61954:2011 /FprA 1:2012 Static VAR compensators (SVC) - Testing of thyristor valves (IEC 61954:2011/A1:201X) Data Limite: 2012-07-20 TC 22X EN 62040-1:2008 /FprA 1:2011 Uninterruptiblepower systems (UPS) Part 1: General and safety requirements for UPS (IEC 62040-1:2008/A1:201X) Data Limite: 2012-05-25 TC 22X FprEN 62040-4:2012 Uninterruptible power systems (UPS) Part 4: Environmental aspects - Requirements and reporting (IEC 62040-4:201X) Data Limite: 2012-09-14 TC 22X FprEN 62477-1:2012 Safety requirements for power electronic converter systems and equipment Part 1: General (IEC 62477-1:201X) Data Limite: 2012-06-01 TC 23E FprEN 61008-1:2011 Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) Part 1: General rules (IEC 61008-1:2010, modif) Data Limite: 2012-05-11 TC 23E FprEN 61009-1:2011 Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) Part 1: General rules (IEC 61009-1:2010, modif) Data Limite: 2012-05-11 TC 23E FprEN 62423:2011 Type F and type B residual current operated circuit-breakers with and without integral overcurrent protection for household and similar uses (IEC 62423:2009, modif) Data Limite: 2012-05-11 TC 23E FprEN 62606:2012 General requirements for Arc Fault Detection Devices (AFDD)

(IEC 62606:201X) Data Limite: 2012-07-06 TC 31 FprEN 60079-31:2012 Explosive atmospheres Part 31: Equipment dust ignition protection by enclosure "t" (IEC 60079-31:201X) Data Limite: 2012-08-17 TC 34Z EN 60061-1:1993 /FprA 49:2011 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 1: Lamp caps (IEC 60061-1:1969/A49:201X) Data Limite: 2012-05-25 TC 34Z EN 60061-2:1993 /FprA 46 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 2: Lampholders (IEC 60061-2:1969/A46:201X) Data Limite: 2012-05-25 TC 34Z EN 60061-3:1993 /FprA 47:2011 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 3: Gauges (IEC 60061-3:1969/A47:201X) Data Limite: 2012-05-25 TC 34Z FprEN 60598-2-8:2012 Luminaires Part 2-8: Particular requirements - Handlamps (IEC 60598-2-8:201X) Data Limite: 2012-08-10 TC 34Z FprEN 60598-2-11:2011 Luminaires Part 2-11:Particular requirements - Aquarium luminaires (IEC 60598-2-11:201X) Data Limite: 2012-05-11 TC 34Z FprEN 60598-2-12:2012 Luminaires Part 2-12: Particular requirements - Mains socket-outlet mounted nightlights (IEC 60598-2-12:201X) Data Limite: 2012-06-08 TC 34Z EN 61347-2-1:2001 /FprA 2:2011 Lamp controlgear Part 2-1: Particular requirements for starting devices (other than glow starters) (IEC 61337-2-1:2000/A2:201X) Data Limite: 2012-05-25 TC 37A EN 61643-21:2001 /FprA 2:2012 Low voltage surge protective devices Part 21: Surge protective devices connected to telecommunications and signalling networks - Performance requirements and testing methods (IEC 61643-21:2000/A2:201X) Data Limite: 2012-06-08 TC 40XB FprEN 60115-8:2012 Fixed resistors for use in electronic equipment Part 8: Sectional specification - Fixed surface mount resistors



(IEC 60115-8:2009, modif) Data Limite: 2012-07-06 TC 40XB FprEN 60440:2012 Method of measurement of non-linearity inresistors (IEC 60440:201X) Data Limite: 2012-06-29 TC 44X FprEN 60204-31:2011 Safety of machinery - Electrical equipment of machines Part 31: Particular safety and EMC requirements for sewing machines, units and systems (IEC 60204-31:201X) Data Limite: 2012-05-25 TC 44X EN 62061:2005 /FprA 1:2011 Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems (IEC 62061:2005/A1:201X) Data Limite: 2012-05-04 TC 45B prEN 60846-1:2012 Radiation protection instrumentation - Ambient and/or directional dose equivalent (rate) meters and/or monitors for beta, X and gamma radiation Part 1: Portable workplace and environmental meters and monitors (IEC 60846-1:2009) Data Limite: 2012-05-11 TC 46X FprEN 50289-4-16:2012 Communication cables - Specifications for test methods Part 4-16: Environmental test methods - Circuit integrity under fire conditions Data Limite: 2012-06-01 TC 55 FprEN 60317-0-1:2012 Specifications for particular types of winding wires Part 0-1: General requirements - Enamelled round copper wire (IEC 60317-0-1:201X) Data Limite: 2012-08-10 TC 55 EN 60317-0-3:2008 /FprA 1:2012 Specifications for particular types of winding wires Part 0-3: General requirements - Enamelled round aluminum wire (IEC 60317-0-3:2008/A1/201X) Data Limite: 2012-08-10 TC 55 FprEN 60317-0-8:2012 Specifications for particular types of winding wires Part 0-8: General requirements - Polyester glass-fibre wound, resin or varnish impregnated or not impregnated, bare or enamelled rectangular copper wire (IEC 60317-0-8:201X) Data Limite: 2012-06-08 TC 55 FprEN 60317-2:2012 Specifications for particular types of winding wires Part 2: Solderable polyurethane enamelled round copper wire, class 130, with a bonding layer (60317-2:201X) Data Limite: 2012-06-08

TC 55 FprEN 60317-20:2012 Specifications for particular types of winding wires Part 20: Solderable polyurethane enamelled round copper wire, class 155 (IEC 60317-20:201X) Data Limite: 2012-07-20 TC 55 FprEN 60317-21:2012 Specifications for particular types of winding wires Part 21: Solderable polyurethane enamelled round copper wire overcoated with polyamide, class 155 (IEC 60317-21:201X) Data Limite: 2012-07-20 TC 55 FprEN 60317-23:2012 Specifications for particular types of winding wires Part 23: Solderable polyesterimide enamelled round copper wire, class 180 (IEC 60317-23:201X) Data Limite: 2012-07-20 TC 55 FprEN 60317-35:2012 Specifications for particular types of winding wires Part 35: Solderable polyurethane enamelled round copper wire, class 155, with a bonding layer (IEC 60317-35:201X) Data Limite: 2012-07-20 TC 55 FprEN 60317-36:2012 Specifications for particular types of winding wires Part 36: Solderable polyesterimide enamelled round copper wire, class 180, with a bonding layer (IEC 60317-36:201X) Data Limite: 2012-07-20 TC 55 FprEN 60317-37:2012 Specifications for particular types of winding wires Part 37: Polyesterimide enamelled round copper wire, class 180, with a bonding layer (IEC 60317-37:201X) Data Limite: 2012-07-20 TC 55 FprEN 60317-38:2012 Specifications for particular types of winding wires Part 38: Polyester or polyesterimide overcoated with polyamide-imide enamelled round copper wire, class, 200 with a bonding layer (IEC 60317-38:201X) Data Limite: 2012-07-20 TC 55 FprEN 60317-46:2012 Specifications for particular types of winding wires Part 46: Aromatic polyimide enamelled round copper wire, class 240 (IEC 60317-46:201X) Data Limite: 2012-08-17 TC 55 FprEN 60317-47:2012 Specification for particular types of winding wires Part 47: Aromatic polyimide enamelled rectangular copper wire, class 240 (IEC 60317-47:201X) Data Limite: 2012-08-17



TC 55 FprEN 60317-48:2012 Specifications for particular types of winding wires Part 48: Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 155 (IEC 60317-48:201X) Data Limite: 2012-06-22 TC 55 FprEN 60317-49:2012 Specifications for particular types of winding wires Part 49: Glass-fibre wound high temperature resin or varnish impregnated, bare or enamelled round copper wire, temperature index 180 (IEC 60317-49:201X) Data Limite: 2012-06-22 TC 55 FprEN 60317-50:2012 Specifications for particular types of winding wires Part 50: Glass-fibre wound silicone resin or varnish impregnated, bare or enamelled round copper wire, temperature index 200 (IEC 60317-50:201X) Data Limite: 2012-06-22 TC 55 FprEN 60317-55:2012 Specifications for particular types of winding wires Part 55: Solderable polyurethane enamelled round copper wire overcoated with polyamide, class 180 (IEC 60317-55:201X) Data Limite: 2012-08-17 TC 55 FprEN 60317-60:2012 Specifications for particular types of winding wires Part 60: Polyester glass fibres wound, resin or varnish impregnated or not impregnated, bare or enamelled rectangular copper wire, temperature index 155 (IEC 60317-60:201X) Data Limite: 2012-06-01 TC 55 FprEN 60317-61:2012 Specifications for particular types of winding wires Part 61: Polyester glass fibres wound resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180 (IEC 60317-61:201X) Data Limite: 2012-06-08 TC 55 FprEN 60317-62:2012 Specifications for particular types of winding wires Part 62: Polyester glass fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 200 (IEC 60317-62:201X) Data Limite: 2012-06-08 TC 55 EN 60851-3:2009 /FprA 1:2012 Winding wires - Test methods Part 3: Mechanical properties (IEC 60851-3:2009/A1:201X) Data Limite: 2012-08-10 TC 57 FprEN 61968-9:2012 Application integration at electric utilities - System interfaces for distribution management Part 9: Interface standard for meter reading and control

(IEC 61968-9:201X) Data Limite: 2012-10-05 TC 57 FprEN 61968-100:2012 Application integration at electric utilities - System interfaces for distribution management Part 100: Implementation profiles (IEC 61968-100:201X) Data Limite: 2012-10-05 TC 57 FprEN 61970-301:2011 Energy management system application program interface (EMS-API) Part 301: Common information model (CIM) base (IEC 61970-301:201X) Data Limite: 2012-05-04 TC 57 FprEN 62325-301:2012 Framework for energy market communications Part 301: Common Information Model (CIM) extensions for markets (IEC 62325-301:201X) Data Limite: 2012-09-21 TC 59X EN 50242:2008 /FprA A:2012 Electric dishwashers for household use - Methods for measuring the performance (IEC 60436:2004/A1:2009, modif + IEC 60436:2004/A2:2012, modif) Data Limite: 2012-06-29 TC 59X prEN 60350-1:2012 Household electric cooking appliances Part 1: Ranges, ovens, steam ovens and grills - Methods for measuring performance (IEC 60350-1:2011, modif) Data Limite: 2012-06-22 TC 59X prEN 60350-2:2010 Household electric cooking appliances Part 2: Hobs - Methods for measuring performance (IEC 60350-2:2011, modif) Data Limite: 2012-06-22 TC 59X EN 60704-1:2010 /FprA A:2012 Household and similar electrical appliances - Test code for the determination of airborne noise Part 1: General requirements Data Limite: 2012-09-07 TC 59X FprEN 60734:2012 Household electrical appliances - Performance - Hard water for testing (IEC 60734:201X) Data Limite: 2012-05-18 TC 61 EN 60335-1:2012 /FprA 1:2011 Household and similar electrical appliances - Safety Part 1: General requirements (IEC 60335-1:2010/A1:201X) (fragment 7) Data Limite: 2012-05-04 TC 61 EN 60335-1:2012 /FprA 1:2011 Household and similar electrical appliances - Safety Part



1: General requirements (IEC 60335-1:2010/A1:201X) (fragment 8) Data Limite: 2012-05-04 TC 61 EN 60335-2-2:2010 /FprA 1:2011 Household and similar electrical appliances - Safety Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances (IEC 60335-2-2:2009/A1:201X) Data Limite: 2012-05-04 TC 61 EN 60335-2-2:2010 /FprA A:2012 Household and similar electrical appliances - Safety Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances Data Limite: 2012-06-01 TC 61 EN 60335-2-4:2010 /FprA 1:2011 Household and similar electrical appliances - Safety Part 2-4: Particular requirements for spin extractors (IEC 60335-2-4:2008/A1:201X) Data Limite: 2012-05-04 TC 61 EN 60335-2-5:2003 /FprAB B:2012 Household and similar electrical appliances - Safety Part 2-5: Particular requirements for dishwashers Data Limite: 2012-06-01 TC 61 FprEN 60335-2-5:2011 Household and similar electrical appliances - Safety Part 2-5: Particular requirements for dishwashers (IEC 60335-2-5:201X) Data Limite: 2012-05-04 TC 61 EN 60335-2-7:2010 /FprA C:2012 Household and similar electrical appliances - Safety Part 2-7: Particular requirements for washing machines Data Limite: 2012-06-01 TC 61 FprEN 60335-2-8:2011 Household and similar electrical appliances - Safety Part 2-8: Particular requirements for shavers, hair clippers and similar appliances (IEC 60335-2-8:201X) Data Limite: 2012-05-04 TC 61 EN 60335-2-9:2009 /FprA 1:2011 Household and similar electrical appliances - Safety Part 2-9: Particular requirements for grills, toasters and similar portable cooking appliances (IEC 60335-2-9:2008/A1:201X) Data Limite: 2012-05-04 TC 61 EN 60335-2-11:2010 /FprA 1:2011 Household and similar electrical appliances - Safety Part 2-11: Particular requirements for tumble dryers (IEC 60335-2-11:2008/A1:201X) Data Limite: 2012-05-04 TC 61 EN 60335-2-11:2010 /FprAB B:2012 Household and similar electrical appliances - Safety Part 2-11: Particular requirements for tumble dryers

Data Limite: 2012-06-01 TC 61 EN 60335-2-13:2010 /FprA A:2012 Household and similar electrical appliances - Safety Part 2-13 : Particular requirements for deep fat fryers, frying pans and similar applianes Data Limite: 2012-06-01 TC 61 EN 60335-2-14:2006 /FprA 2:2011 Household and similar electrical appliances - Safety Part 2-14: Particular requirements for kitchen machines (IEC 60335-2-14:2006/A2:201X) Data Limite: 2012-05-04 TC 61 FprEN 60335-2-15:2011 Household and similar electrical appliances - Safety Part 2-15: Particular requirements for appliances for heating liquids (IEC 60335-2-15:201X) Data Limite: 2012-05-11 TC 61 FprEN 60335-2-21:2011 Household and similar electrical applianes - Safety Part 2-21: Particular requirements for storage water heaters (IEC 60335-2-21:201X) Data Limite: 2012-05-11 TC 61 EN 60335-2-23:2003 /FprA C:2012 Household and similar electrical appliances - Safety Part 2-23: Particular requirements for appliances for skin or hair care Data Limite: 2012-09-07 TC 61 EN 60335-2-27:2010 /FprA A:2012 Household and similar electrical appliances - Safety Part 2-27: Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation Data Limite: 2012-09-07 TC 61 EN 60335-2-27:2011 /FprA 1:2011 Household and similar electrical appliances - Safety Part 2-27: Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation (IEC 60335-2-27:2009/A1:201X) Data Limite: 2012-05-04 TC 61 EN 60335-2-30:2009 /FprA 1:2011 Household and similar electrical appliances - Safety Part 2-30: Particular requirements for room heaters (IEC 60335-2-30:2009/A1:201X) Data Limite: 2012-05-04 TC 61 FprEN 60335-2-31:2011 Household and similar electrical appliances - Safety Part 2-31: Particular requirements for range hoods and other cooking fume extractors (IEC 60335-2-31:201X) Data Limite: 2012-05-11 TC 61 FprEN 60335-2-35:2011 Household and similar electrical appliances - Safety Part 2-35: Particular requirements for instantaneous water heaters (IEC 60335-2-35:201X)



Data Limite: 2012-05-04 TC 61 FprEN 60335-2-40:2012 Household and similar electrial appliances - Safety Part 2-40: Particular Requirements for electrical heat pumps, air-conditioners and dehumidifiers (IEC 60335-2-40:201X) Data Limite: 2012-06-15 TC 61 FprEN 60335-2-41:2011 Household and similar electrical appliances - Safety Part 2-41: Particular requirements for pumps (IEC 60335-2-41:201X) Data Limite: 2012-05-04 TC 61 EN 60335-2-45:2002 /FprA A:2012 Household and similar electrical appliances - Safety Part 2-45: Particular requirements for portable heating tools and similar appliances Data Limite: 2012-09-07 TC 61 EN 60335-2-70:2002 /FprA 2:2012 Household and similar electrical appliances - Safety Part 2-70: Particular requirements for milking machines (IEC 60335-2-70:2002/A2:201X) Data Limite: 2012-06-22 TC 61 EN 60335-2-71:2003 /FprA 2:2012 Household and similar electrical appliances - Safety Part 2-71: Particular requirements for electrical heating appliances for breeding and rearing animals (IEC 60335-2-71:2002/A2:201X) Data Limite: 2012-06-22 TC 61 FprEN 60335-2-75:2011 Household and similar electrical appliances - Safety Part 2-75: Particular requirements for commercial dispensing appliances and vending machines (IEC 60335-2-75:201X) Data Limite: 2012-05-11 TC 61 EN 60335-2-76:2005 /FprA 2:2012 Household and similar electrical appliances - Safety Part 2-76: Particular requirements for electric fence energizers (IEC 60335-2-76:2002/A2:201X) Data Limite: 2012-06-22 TC 61 EN 60335-2-86:2003 /FprA 2:2012 Household and similar electrical appliances - Safety Part 2-86: Particular requirements for electric fishing machines (IEC 60335-2-86:2002/A2:201X) Data Limite: 2012-06-22 TC 61 EN 60335-2-86:2003 /FprAB B:2012 Household and similar electrical appliances - Safety Part 2-86: Particular requirements for electric fishing machines Data Limite: 2012-09-07 TC 61 EN 60335-2-87:2002 /FprA 2:2012 Household and similar electrical appliances - Safety Part 2-87: Particular requirements for electrical

animal-stunning equipment (IEC 60335-2-87:2002/A2:201X) Data Limite: 2012-06-22 TC 61 EN 60335-2-99:2003 /FprA A:2012 Household and similar electrical appliances - Safety Part 2-99: Particular requirements for commercial electric hoods Data Limite: 2012-09-07 TC 61 EN 60335-2-102:2006 /FprA 2:2011 Household and similar electrical appliances - Safety Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections (IEC 60335-2-102:2004/A2:201X) Data Limite: 2012-05-04 TC 61 FprEN 60335-2-110:2012 Household and similar appliances - Safety Part 2-110: Particular requirements for commercial microwave appliances with insertion or contacting applicators (IEC 60335-2-110:201X) Data Limite: 2012-07-27 TC 62 EN 60601-1:2006 /FprA 1:2012 Medical electrical equipment Part 1: General requirements for basic safety and essential performance (IEC 60601-1:2005/A1:201X)) Data Limite: 2012-06-29 TC 62 FprEN 60601-1-2:2012 Medical electrical equipment Part 1-2: General requirements for basic safety and essential performance - Collateral standard: Electromagnetic disturbances - Requirements and tests (IEC 60601-1-2:201X) Data Limite: 2012-08-17 TC 62 FprEN 60601-1-12:2012 Medical electrical equipment Part 1-12: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems intended for use in the emergency medical services environment (IEC 60601-1-12:201X) Data Limite: 2012-06-15 TC 62 FprEN 60601-2-10:2012 Medical electrical equipment Part 2-10: Particular requirements for the basic safety and essential performance of nerve and muscle stimulators (IEC 60601-2-10: 201X) Data Limite: 2012-06-08 TC 62 FprEN 60601-2-26:2012 Medical electrical equipment Part 2-26: Particular requirements for basic safety and essential performance of electroencephalographs (IEC 60601-2-26:201X) Data Limite: 2012-05-11 TC 62 FprEN 60601-2-62:2011 Medical electrical equipment Part 2-62: Particular



requirements for basic safety and essential performance of high intensity therapeutic ultrasound (HITU) systems (IEC 60601-2-62:201X) Data Limite: 2012-05-25 TC 62 FprEN 61331-1:2012 Protective devices against diagnostic medical X-radiation Part 1: Determination of attenuation properties of materials (IEC 61331-1:201X) Data Limite: 2012-09-21 TC 62 FprEN 61331-2:2012 Protective devices against diagnostic medical X-radiation Part 2: Translucent protective plates (IEC 61331-2:201X) Data Limite: 2012-09-21 TC 62 FprEN 61331-3:2012 Protective devices against diagnostics medical X- Radiation Part 3: Protective clothing, eyewear and protective patient shields (IEC 61331-3:201X) Data Limite: 2012-09-21 TC 62 EN 80601-2-30:2010 /FprA 1:2012 Medical electrical equipment Part 2-30: Particular requirements for the basic safety and essential performance of automated non-invasive sphygmomanometers (IEC 80601-2-30:2009/A1:201X) Data Limite: 2012-06-29 TC 64 HD 60364-5-51:2009 /FprA A:2012 Electrical installations of buildings Part 5-51: Selection and erection of electrical equipment - Common rules Data Limite: 2012-07-13 TC 64 HD 60364-7-718:2010 /FprA A:2012 Low-voltage electrical installations Part 7-718: Requirements for special installations or locations - Communal facilities and workplaces Data Limite: 2012-09-14 TC 65X FprEN 60770-3:2012 Transmitters for use in industrial-process control systems Part 3: Methods for performance evaluation of intelligent transmitters (IEC 60770-3:201X) Data Limite: 2012-09-07 TC 65X FprEN 61131-9:2011 Programmable controllers Part 9: Single-drop digital communication interface for small sensors and actuators (SDCI) (IEC 61131-9: 201X) Data Limite: 2012-05-11 TC 65X FprEN 61784-5-X:2011 Industrial communication networks - Profiles Part 5-X: Installation of fieldbuses - Installation profiles for CPF X (IEC 61784-5-X:201X) Data Limite: 2012-05-18

TC 65X FprEN 61918:2011 Industrial communication networks - Installation of communication networks in industrial premises (IEC 61918:201X) Data Limite: 2012-05-18 TC 65X EN 61918:2011 /FprA A:2012 Industrial communication networks - Installation of communication networks in industrial premises Data Limite: 2012-06-29 TC 65X FprEN 62264-1:2012 Enterprise system integration Part 1: Models and terminology (IEC 62264-4:201X) Data Limite: 2012-07-13 TC 65X FprEN 62264-2:2012 Enterprise system integration Part 2: Object models and attributes (IEC 62264-2:201X) Data Limite: 2012-07-13 TC 65X FprEN 62439-3:2012 Industrial communication networks - High availability automation networks Part 3: Parallel Redundancy Protocol (PRP) and High-availability Seamless Redundancy (HSR) (IEC 62439-3:201X) Data Limite: 2012-05-18 TC 65X FprEN 62703:2012 Expression of performance of fluorometric oxygen analyzers in liquid media (IEC 62703:201X) Data Limite: 2012-08-03 TC 78 FprEN 60900:2012 Live working - Hand tools for use up to 1000 V a.c. and 1500 V d.c. (IEC 60900:201X) Data Limite: 2012-05-18 TC 78 FprEN 61472:2011 Live working - Minimum approach distances for ac systems in the voltage range 72,5 kV to 800 kV - A method of calculation (IEC 61472:201X) Data Limite: 2012-05-11 TC 79 prTS 50131-11:2012 Alarm systems - Intrusion and hold-up systems Part 11: Hold-up devices Data Limite: 2012-06-01 TC 79 FprEN 50131-2-7-1:2012 Alarm systems - Intrusion and hold-up systems Part 2-7-1: Intrusion detectors - Glass break detectors (acoustic) Data Limite: 2012-07-06 TC 79 FprEN 50131-2-7-2:2012 Alarm systems - Intrusion and hold-up systems Part 2-7-2: Intrusion detectors - Glass break detectors (passive)



Data Limite: 2012-07-06 TC 79 FprEN 50131-2-7-3:2012 Alarm systems - Intrusion and hold-up systems Part 2-7-3: Intrusion detectors - Glass break detectors (active) Data Limite: 2012-07-06 TC 79 FprEN 50132-7:2012 Alarm systems - CCTV surveillance systems for use in security applications Part 7: Application guidelines Data Limite: 2012-05-11 TC 79 prEN 50136-3:2011 Alarm systems - Alarm transmission systems and equipment Part 3: Requirements for Receiving Centre Transceiver (RCT) Data Limite: 2012-05-11 TC 79 FprEN 60839-11-1:2012 Alarm systems Part 11-1: Electronic access control systems - System and components requirements (IEC 60839-11-1:201X) Data Limite: 2012-05-25 TC 81X EN 50536:2011 /FprA A:2012 Protection against lightning - Thunderstorm warning systems Data Limite: 2012-07-06 TC 82 EN 50521:2008 /FprA A:2012 Connectors for photovoltaic systems - Safety requirements and tests Data Limite: 2012-05-18 TC 82 EN 61730-1:2007 /FprA 2:2012 Photovoltaic (PV) module safety qualification Part 1: Requirements for construction (IEC 61730-1:2004/A2:201X) Data Limite: 2012-06-22 TC 82 FprEN 61829:2012 Crystalline silicon photovoltaic (PV) array - On-site measurement of I-V characteristics (IEC 61829:201X) Data Limite: 2012-07-13 TC 82 FprEN 62116:2012 Test procedure of islanding prevention measures for utility-interconnected photovoltaic inverters (IEC 62116:201X) Data Limite: 2012-08-17 TC 86A FprEN 60794-1-24:2012 Optical fibre cables Part 1-24: Generic specification - Basic optical cable test procedures - Electrical test methods (IEC 61794-1-24:201X) Data Limite: 2012-09-14 TC 86BXA FprEN 61300-2-28:2012 Fibre optic interconnecting devices and passive components - Basic tests and measurement procedures Part 2-28: Tests - Industrial atmosphere (sulphur

dioxide) (IEC 61300-2-28:201X) Data Limite: 2012-07-06 TC 86BXA FprEN 61300-3-29:2012 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 3-29: Examinations and measurements - Spectral transfer characteristics of DWDM devices (IEC 61300-3-29:201X) Data Limite: 2012-06-29 TC 86BXA FprEN 61300-3-38:2012 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 3-38: Examinations and measurements - Group delay, chromatic dispersion and phase ripple (IEC 61300-3-38:201X) Data Limite: 2012-05-04 TC 86BXA FprEN 61300-3-44:2012 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 3-44: Examinations and measurements - Fibre optic trancsceiver receptacle endface visual and automated inspection (IEC 61300-3-44:201X) Data Limite: 2012-06-22 TC 86BXA FprEN 61300-3-49:2012 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 3-49: Measurement: Guide pin retention force for rectangular ferrule multi-fibre connectors (IEC 61300-3-49:201X) Data Limite: 2012-08-10 TC 86BXA FprEN 61754-4:2012 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces Part 4:Type SC connector family (IEC 61754-4:201X) Data Limite: 2012-06-29 TC 86BXA FprEN 61754-6:2012 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces Part 6: Type MU connector family (IEC 61754-6:201X) Data Limite: 2012-06-29 TC 86BXA FprEN 61754-26:2012 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces Part 26: Type SF connector family (IEC 61754-26:201X) Data Limite: 2012-06-22 TC 94 FprEN 62246-1-1:2011 Reed switches Part 1-1: Quality assessment specification (IEC 62246-1-1:201X) Data Limite: 2012-05-04 TC 100X EN 62227:2008 /FprA 1:2012 Multimedia home server systems - Digital rights



permission code (IEC 62227:2008/A1:201X) Data Limite: 2012-06-01 TC 100X FprEN 62680-1:2012 Universal Serial Bus interfaces for data and power Part 1: Universal Serial Bus Specification (IEC 62680-1:201X) Data Limite: 2012-08-10 TC 100X FprEN 62680-2:2012 Universal Serial Bus interfaces for data and power Part 2: USB micro-USB cables and connectors specification (IEC 62680-2:201X) Data Limite: 2012-08-10 TC 100X FprEN 62680-3:2012 Universal Serial Bus interfaces for data and power Part 3: USB battery charging specification (IEC 62680-3:201X) Data Limite: 2012-08-10 TC 100X FprEN 62680-4:2012 Universal Serial Bus interfaces for data and power Part 4: Universal Serial Bus cables and connectors class (IEC 62680-4:201X) Data Limite: 2012-08-10 TC 100X prEN 62731:2012 Text-to-Speech for Television - General Requirements (IEC 62731:201X) Data Limite: 2012-05-18 TC 106X prEN 61786-1:2012 Measurement of DC magnetic fields, AC magnetic and electric fields from 1 Hz to 100 kHz with regard to exposure of human beings - Special requirements for instruments (IEC 617856-1:201X) Data Limite: 2012-08-10 TC 108X FprEN 60065:2012 Audio, video and similar electronic apparatus - Safety requirements (IEC 60065:201X) Data Limite: 2012-05-18 TC 108X FprEN 60065:2012 Audio, video and similar electronic apparatus - Safety requirements (IEC 60065:201X) Data Limite: 2012-05-18 TC 108X EN 60065:2012 /FprA A:2011 Audio, video and similar electronic apparatus - Safety requirements Data Limite: 2012-05-18 TC 108X EN 60950-1:2006 /FprA 2:2011 Information technology equipment - Safety Part 1: General requirements (IEC 60950-1:2005/A2:201X) Data Limite: 2012-05-18

TC 108X EN 60950-1:2006 /FprA E:2011 Information technology equipment - Safety Part 1: General requirements Data Limite: 2012-05-18 TC 108X FprEN 62368-1:2011 Audio/video, information and communication technology equipment Part 1: Safety requirements (IEC 62368-1:201X) Data Limite: 2012-05-18 TC 108X EN 62368-1:2011 /FprA A:2011 Audio/video, information and communication technology equipment Part 1: Safety requirements Data Limite: 2012-05-18 TC 111X FprEN 50581:2012 Technical documentation for the assessement of electrical and electronic products with respect to the restriction of hazardous substances Data Limite: 2012-06-08 TC 116 EN 60745-2-3:2011 /FprA 2:2012 Hand-held motor-operated electric tools - Safety Part 2-3: Particular requirements for grinders, polishers and disk-type sanders (IEC 60745-2-3:2006 /A2:201X) Data Limite: 2012-05-18 TC 116 FprEN 60745-2-23:2011 Hand-held motor-operated electric tools - Safety Part 2-23: Particular requirements for die grinders and small rotary tools (IEC 60745-2-23:201X) Data Limite: 2012-05-11 TC 116 FprEN 61029-2-1:2012 Safety of transportable motor-operated electric tools Parte 2-1: Particular requirements for circular saw benches IEC 61029-2-1:1993, modif + A1:1999 + A2:2001) Data Limite: 2012-07-27 TC 116 FprEN 61029-2-9:2012 Safety of transportable motor-operated electric tools Part 2-9: Particular requirements for mitre saws (IEC 61029-2-9:1995, modif) Data Limite: 2012-07-27 TC 116 FprEN 61029-2-11:2012 Safety of transportable motor-operated electric tools Part 2-11: Particular requirements for combined mitre and bench saws (IEC 61029-2-11:2001, modif) Data Limite: 2012-07-27 TC 206 FprEN 62698:2012 Multimedia home server systems - Rights information interoperability for IPTV (IEC 62698:201X) Data Limite: 2012-05-04



TC 209 FprEN 60728-3-1:2012 Cable networks for television signals, sound signals and interactive services Part 3-1: Methods of measurement of non-linearity for full digital channel load with DVB-C signals (IEC 60728-3-1:201X) Data Limite: 2012-06-08 TC 210 EN 55016-1-2:2004 /FprA 3:2012 Specification for radio disturbance and immunity measuring apparatus and methods Part 1-2: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Conducted disturbances (CISPR 16-1-2-:2003/A3:201X) Data Limite: 2012-09-14 TC 210 EN 55016-1-2:2004 /FprA 3:2012 Specification for radio disturbance and immunity measuring apparatus and methods Part 1-2: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Conducted disturbances (CISPR 16-1-2-:2003/A3:201X) Data Limite: 2012-09-28 TC 210 EN 55016-1-4:2010 /FprA 1:2012 Specification for radio disturbance and immunity measuring apparatus and methods Part 1-4: Radio disturbance and immunity measuring apparatus - Antennas and test sites for radiated disturbance measurements (CISPR 16-1-4:2010/A1:201X) Data Limite: 2012-05-18 TC 210 EN 55016-1-5:2004 /FprA 1:2012 Specification for radio disturbance and immunity measuring apparatus and methods Part 1-5: Radio disturbance and immunity measuring apparatus - Antenna calibration test sites for 30 MHz to 1 000 MHz (CISPR 16-1-5:2003/A1:201X) Data Limite: 2012-05-18 TC 210 EN 55016-2-1:2009 /FprA 3:2012 Specification for radio disturbance and immunity measuring apparatus and methods Part 2-1: Methods of measurement of disturbances and immunity - Conducted disturbance measurements (CISPR 16-2-1:2008/A3:201X) Data Limite: 2012-09-28 TC 210 EN 55016-2-3:2010 /FprA 2:2011 Specification for radio disturbance and immunity measuring apparatus and methods Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements (CISPR 16-2-3:2010/A2:201X) (fragment 1) Data Limite: 2012-05-25 TC 210 prEN 61000-3-3:2012 Electromagnetic compatibility (EMC) Part 3-3: Limits - Limitation of voltage changes, voltage flutuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection (IEC 61000-3-3:2008) (IEC 61000-3-3:1994/A3:200X) (IEC 61000-3-3:1994/A2:2005) Data Limite: 2012-07-20

TC 213 FprEN 61534-21:2012 Powertrack systems Part 21: Particular requirements for powertrack systems intended for wall and ceiling mounting (IEC 61534-21:201X) Data Limite: 2012-06-15 TC 215 prEN 50173-6:2012 Information technology - Generic cabling systems Part 6: Distributed building services Data Limite: 2012-09-07 TC 215 prEN 50174-3:2012 Information technology - Cabling installation Part 3: Installation planning and practices outside buildings Data Limite: 2012-09-07 TC 215 prEN 50600-1:2011 Information tecchnology - Data centre facilities and infrastructures Part 1: General concepts Data Limite: 2012-05-04 TC 216 prEN 50292:2012 Electrical apparatus for the detection of carbon monoxide in domestic premises, caravans and boats - Guide on the selection, installation, use and maintenance Data Limite: 2012-06-15



6.2 Propostas de anulação de Normas

As propostas de anulação de normas estão organizadas por Comités Técnicos do CENELEC.


LISTA VAZIA



6.3 Proposta de estudo de novas normas - "Vilamoura Procedures"

Lista de propostas de estudo baseadas em novas normas ou em revisão de normas apresentadas por organismos nacionais membros do CENELEC, com vista à possível elaboração de normas europeias

LISTA VAZIA



6.4 Questionários preliminares Lista dos Documentos de Referência (RD) objecto de Questionários Preliminares (PQ), com vista à sua aceitação como normas europeias.

LISTA VAZIA



7. Projetos de Normas e Propostas de Estudo de Novas Normas do Comité Europeu de Normalização (CEN) / Comité Europeu de Normalização Eletrotécnica (CENELEC) 7.1 Projetos em inquérito público Para cada referência menciona-se a designação codificada, o título e a data limite para a apresentação de comentários.

LISTA VAZIA



8. Projetos de normas do Instituto Europeu de Normalização para as Telecomunicações (ETSI) 8.1 Projetos em inquérito público Para cada referência menciona-se a designação codificada, o título e a data limite para a apresentação de comentários. TC ETSI prEN 300176-2:2012 Digital Enhanced Cordless Telecommunications (DECT); Test specification Part 2: Audio and speech Data Limite: 2012-07-12 TC ETSI prEN 300220-1:2012 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment to be used in the 25 MHz to 1 000 MHz frequency range with power levels ranging up to 500 mW Part 1: Technical characteristics and test methods Data Limite: 2012-05-08 TC ETSI prEN 300220-2:2012 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment to be used in the 25 MHz to 1 000 MHz frequency range with power levels ranging up to 500 mW Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive Data Limite: 2012-05-08 TC ETSI prEN 300328:2012 Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband transmission systems; Data transmission equipment operating in the 2,4 GHz ISM band and using wide band modulation techniques; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive Data Limite: 2012-06-04 TC ETSI prEN 300386:2012 Electromagnetic compatibility and Radio spectrum Matters (ERM); Telecommunication network equipment; ElectroMagnetic Compatibility (EMC) requirements Data Limite: 2012-08-10 TC ETSI prEN 300392-7:2012 Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D) Part 7: Security Data Limite: 2012-07-24 TC ETSI prEN 300468:2012 Digital Video Broadcasting (DVB); Specification for Service Information (SI) in DVB systems Data Limite: 2012-08-14 TC ETSI prEN 300609-4:2012 Global System for Mobile communications (GSM) Part 4: Harmonized EN for GSM Repeaters covering the essential requirements of article 3.2 of the R&TTE Directive Data Limite: 2012-05-17

TC ETSI prEN 301489-17:2012 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment Part 17: Specific conditions for Broadband Data Transmission Systems Data Limite: 2012-08-14 TC ETSI prEN 301489-34:2012 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services Part 34: Specific conditions for External Power Supply (EPS) for mobile phones Data Limite: 2012-05-08 TC ETSI prEN 301489-50:2012 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services Part 50: Specific conditions for Cellular Communication Base Station (BS), repeater and ancillary equipment Data Limite: 2012-08-06 TC ETSI prEN 301502:2012 Global System for Mobile communications (GSM); Harmonized EN for Base Station Equipment covering the essential requirements of article 3.2 of the R&TTE Directive Data Limite: 2012-05-29 TC ETSI prEN 301559-1:2012 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Low Power Active Medical Implants (LP-AMI) operating in the frequency range 2 483,5 MHz to 2 500 MHz Part 1: Technical characteristics and test methods Data Limite: 2012-06-18 TC ETSI prEN 301559-2:2012 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Low Power Active Medical Implants (LP-AMI) operating in the frequency range 2 483,5 MHz to 2 500 MHz Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive Data Limite: 2012-06-18 TC ETSI prEN 301843-1:2012 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for marine radio equipment and services Part 1: Common technical requirements Data Limite: 2012-08-02



TC ETSI prEN 301893:2012 Broadband Radio Access Networks (BRAN); 5 GHz high performance RLAN; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive Data Limite: 2012-05-30 TC ETSI prEN 301908-2:2012 IMT cellular networks; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive Part 2: CDMA Direct Spread (UTRA FDD) User Equipment (UE) Data Limite: 2012-08-20 TC ETSI prEN 301908-18:2012 IMT cellular networks; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive Part 18: E-UTRA, UTRA and GSM/EDGE Multi-Standard Radio (MSR) Base Station (BS) Data Limite: 2012-05-29 TC ETSI prEN 319401:2012 Electronic Signatures and Infrastructures (ESI); General Policy Requirements for Trust Service Providers supporting Electronic Signatures Data Limite: 2012-07-05 TC ETSI prEN 319411-2:2012 Electronic Signatures and Infrastructures (ESI); Policy and security requirements for Trust Service Providers issuing certificates Part 2: Policy requirements for certification authorities issuing qualified certificates Data Limite: 2012-07-31 TC ETSI prEN 319411-3:2012 Electronic Signatures and Infrastructures (ESI); Policy and security requirements for Trust Service Providers issuing certificates Part 3: Policy requirements for Certification Authorities issuing public key certificates Data Limite: 2012-07-31 TC ETSI prEN 319412-5:2012 Electronic Signatures and Infrastructures (ESI); Profiles for Trust Service Providers issuing certificates Part 5: Extension for Qualified Certificate profile Data Limite: 2012-08-16



8.2 Propostas de anulação de Normas Para cada referência menciona-se a designação codificada, o título e a data limite para a apresentação de comentários.

LISTA VAZIA



9. Projetos de normas e propostas de estudo de novas Normas de Organização Internacional de Normalização (ISO) Os projetos de normas e propostas de estudo de novas normas estão organizadas por Comités Técnicos da ISO.

9.1 Projetos em inquérito público Para cada referência menciona-se a designação codificada, o título e a data limite para a apresentação de comentários. DIS 10377:2011 Consumer product safety Guidelines for suppliers Data Limite: 2012-05-15 DIS 10393:2011 Consumer product recall Guidelines Data Limite: 2012-05-15 DIS 11646:2012 Leather Measurement of area Data Limite: 2012-06-12 DIS 12926:2012 Aluminium fluoride for industrial use Determination of trace elements Wavelength dispersive X-ray fluorescence spectrometric method using pressed powder tablets Data Limite: 2012-06-13 DIS 13574:2012 Industrial furnaces and associated processing equipment Vocabulary Data Limite: 2012-10-02 FDIS 13577-1:2012 Industrial furnaces and associated processing equipment Safety Part 1: General requirements Data Limite: 2012-05-15 DIS 17130:2012 Leather Physical and mechanical tests Determination of dimensional change Data Limite: 2012-06-12 DIS 17489:2012 Leather Chemical tests Determination of tan content in tanning agents Data Limite: 2012-06-12 DIS 17502:2012 Leather Determination of surface reflectance Data Limite: 2012-06-12 FDIS 20121:2012 Event sustainability management systems Requirements with guidance for use Data Limite: 2012-05-30 TC 2 FDIS 898-5:2012 Mechanical properties of fasteners made of carbon steel and alloy steel Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread Data Limite: 2012-05-01 TC 2 DIS 1891-2:2012 Fasteners Terminology Part 2: Vocabulary and definitions for coatings

Data Limite: 2012-07-09 TC 2 FDIS 4162:2012 Hexagon bolts with flange Small series Product grade A with driving feature of product grade B Data Limite: 2012-06-04 TC 2 FDIS 7041:2012 Prevailing torque type hexagon nuts (with non-metallic insert), style 2 Property classes 9 and 12 Data Limite: 2012-05-02 TC 2 FDIS 7720:2012 Prevailing torque type all-metal hexagon nuts, style 2 Property class 9 Data Limite: 2012-05-15 TC 2 ISO 10642:2004 /FDAM 1:2012 Hexagon socket countersunk head screws AMENDMENT 1 Data Limite: 2012-06-05 TC 2 DIS 14581:2012 Fasteners Hexalobular socket countersunk flat head screws Data Limite: 2012-07-02 TC 2 DIS 14582:2012 Hexalobular socket countersunk head screws, high head Data Limite: 2012-07-02 TC 2 FDIS 15072:2012 Hexagon bolts with flange with metric fine pitch thread Small series Product grade A Data Limite: 2012-05-15 TC 4 ISO 1206:2001 /DAM 1:2012 Rolling bearings Needle roller bearings, dimension series 48, 49 and 69 Boundary dimensions and tolerances AMENDMENT 1: Tolerance limits for shaft raceway and housing bore diameters Data Limite: 2012-06-11 TC 4 DIS 2982-1:2012 Rolling bearings Accessories Part 1: Dimensions for adapter sleeve assemblies and withdrawal sleeves Data Limite: 2012-09-10



TC 4 DIS 2982-2:2012 Rolling bearings Accessories Part 2: Dimensions for locknuts and locking devices Data Limite: 2012-09-10 TC 4 FDIS 15241:2012 Rolling bearings Symbols for quantities Data Limite: 2012-05-15 TC 4 FDIS 20515:2012 Rolling bearings Radial bearings, retaining slots Dimensions and tolerances Data Limite: 2012-05-15 TC 5 FDIS 13470:2012 Trenchless applications of ductile iron pipes systems Product design and installation Data Limite: 2012-06-14 TC 6 FDIS 536:2012 Paper and board Determination of grammage Data Limite: 2012-05-22 TC 6 DIS 5636-3:2012 Paper and board Determination of air permeance (medium range) Part 3: Bendtsen method Data Limite: 2012-06-05 TC 6 DIS 5636-4:2012 Paper and board Determination of air permeance (medium range) Part 4: Sheffield method Data Limite: 2012-06-05 TC 6 DIS 5636-5:2012 Paper and board Determination of air permeance (medium range) Part 5: Gurley method Data Limite: 2012-06-05 TC 6 DIS 8791-2:2012 Paper and board Determination of roughness/smoothness (air leak methods) Part 2: Bendtsen method Data Limite: 2012-07-03 TC 8 FDIS 614:2012 Ships and marine technology Toughened safety glass panes for rectangular windows and side scuttles Punch method of non-destructive strength testing Data Limite: 2012-06-03 TC 8 FDIS 1751:2012 Ships and marine technology Ships’ side scuttles Data Limite: 2012-06-20 TC 8 FDIS 3903:2012 Ships and marine technology Ships’ ordinary rectangular windows Data Limite: 2012-06-20 TC 8 FDIS 7365:2012 Shipbuilding and marine structures Deck machinery Towing winches for deep sea use

Data Limite: 2012-06-04 TC 8 FDIS 11336-1:2012 Large yachts Strength, weathertightness and watertightness of glazed openings Part 1: Design criteria, materials, framing and testing of independent glazed openings Data Limite: 2012-05-29 TC 8 FDIS 11347:2012 Ships and marine technology Large yachts Measurement and assessment of the visual appearance of coatings Data Limite: 2012-05-05 TC 8 DIS 13073-2:2012 Ships and marine technology Risk assessment on anti-fouling systems on ships Part 2: Marine environmental risk assessment method for anti-fouling systems on ships using biocidally active substances Data Limite: 2012-07-24 TC 8 DIS 13643-1:2012 Ships and marine technology Manoeuvring of ships Part 1: General concepts, quantities and test conditions Data Limite: 2012-06-25 TC 8 DIS 13643-2:2012 Ships and marine technology Manoeuvring of ships Part 2: Turning and yaw checking Data Limite: 2012-06-25 TC 8 DIS 13643-3:2012 Ships and marine technology Manoeuvring of ships Part 3: Yaw stability and steering Data Limite: 2012-06-25 TC 8 DIS 13643-4:2012 Ships and marine technology Manoeuvring of ships Part 4: Stopping, acceleration, traversing Data Limite: 2012-06-25 TC 8 DIS 13643-5:2012 Ships and marine technology Manoeuvring of ships Part 5: Submarine specials Data Limite: 2012-09-13 TC 8 DIS 13643-6:2012 Ships and marine technology Manoeuvring of ships Part 6: Model test specials Data Limite: 2012-09-13 TC 8 DIS 16145-4:2012 Ships and marine technology Protective coatings and inspection method Part 4: Automated measuring method for the total amount of water-soluble salts Data Limite: 2012-06-11 TC 8 DIS 16425:2012 Ships and marine technology Installation guideline for ship communication network of improving communication for shipboard equipment and systems Data Limite: 2012-07-01



TC 8 FDIS 16437:2012 Ships and marine technology Lifesaving and fire protection Atmospheric oil mist detectors for ships Data Limite: 2012-06-03 TC 8 DIS 16554:2012 Ships and marine technology Marine environment protection Measurement and reporting of underwater sound radiated from merchant ships Data Limite: 2012-08-07 TC 8 FDIS 21005:2012 Ships and marine technology Thermally toughened safety glass panes for windows and side scuttles Data Limite: 2012-06-10 TC 8 FDIS 30002:2012 Ships and marine technology Ship recycling management systems Guidelines for selection of ship recyclers (and pro forma contract) Data Limite: 2012-06-04 TC 10 FDIS 10209:2012 Technical product documentation Vocabulary Terms relating to technical drawings, product definition and related documentation Data Limite: 2012-06-05 TC 17 DIS 377:2012 Steel and steel products Location and preparation of samples and test pieces for mechanical testing Data Limite: 2012-09-12 TC 17 DIS 404:2012 Steel and steel products General technical delivery requirements Data Limite: 2012-07-14 TC 17 FDIS 630-3:2012 Structural steels Part 3: Technical delivery conditions for finegrain structural steels Data Limite: 2012-05-13 TC 17 FDIS 630-4:2012 Structural steels Part 4: Technical delivery conditions for highyield-strength quenched and tempered structural steel plates Data Limite: 2012-05-13 TC 17 DIS 3573:2012 Hot-rolled carbon steel sheet of commercial and drawing qualities Data Limite: 2012-09-24 TC 17 DIS 3574:2012 Cold-reduced carbon steel sheet of commercial and drawing qualities Data Limite: 2012-09-24 TC 17 DIS 5950:2012 Electrolytic tin-coated cold-reduced carbon steel sheet of commercial and drawing qualities

Data Limite: 2012-08-27 TC 17 DIS 5951:2012 Hot-rolled steel sheet of higher yield strength with improved formability Data Limite: 2012-09-10 TC 17 DIS 6316:2012 Hot-rolled steel strip of structural quality Data Limite: 2012-09-27 TC 17 DIS 6929:2012 Steel products Vocabulary Data Limite: 2012-09-10 TC 17 DIS 10384:2012 Hot-rolled carbon steel sheet as defined by chemical composition Data Limite: 2012-09-19 TC 17 DIS 10474:2012 Metallic products Inspection documents Data Limite: 2012-07-14 TC 17 DIS 14404-1:2012 Calculation method of carbon dioxide emission intensity from iron and steel production Part 1: Steel plant with blast furnace Data Limite: 2012-06-24 TC 17 DIS 14404-2:2012 Calculation method of carbon dioxide emission intensity from iron and steel production Part 2: Steel plant with electric arc furnace (EAF) Data Limite: 2012-06-24 TC 17 DIS 16160:2012 Hot-rolled steel sheet products Dimensional and shape tolerances Data Limite: 2012-07-07 TC 20 DIS 10788:2012 Space systems Lunar simulants Data Limite: 2012-09-05 TC 20 DIS 11233:2012 Space Systems Orbit determination and estimation Process for describing techniques Data Limite: 2012-07-27 TC 20 DIS 13832:2012 Aerospace Wire, aluminum alloy and copper clad aluminum conductors General performance requirements Data Limite: 2012-08-28 TC 20 DIS 16049-1:2012 Air cargo equipment Restraint straps Part 1: Design criteria and testing methods Data Limite: 2012-06-06



TC 20 DIS 16126:2012 Space systems Assessment of survivability of unmanned spacecraft against space debris and meteoroid impacts to ensure successful post-mission disposal Data Limite: 2012-08-28 TC 20 DIS 16127:2012 Space systems Prevention of break-up of unmanned spacecraft Data Limite: 2012-09-24 TC 20 DIS 16404:2012 Space systems Programme management Requirements management Data Limite: 2012-08-28 TC 20 DIS 16698:2012 Space environment (natural and artificial) Methods for estimation of future geomagnetic activity Data Limite: 2012-08-28 TC 20 FDIS 27471:2012 Aircraft ground equipment Upper deck loader Functional requirements Data Limite: 2012-06-04 TC 21 FDIS 5923:2012 Equipment for fire protection and fire fighting Fire extinguishing media Carbon dioxide Data Limite: 2012-05-29 TC 21 FDIS 7240-5:2012 Fire detection and alarm systems Part 5: Point-type heat detectors Data Limite: 2012-05-19 TC 21 DIS 7240-14:2012 Fire detection and alarm systems Part 14: Design, installation, commissioning and service of fire detection and fire alarm systems in and around buildings Data Limite: 2012-07-03 TC 22 DIS 2698:2012 Diesel engines Clamp-mounted fuel injectors, types 7 and 28 Data Limite: 2012-06-24 TC 22 DIS 6621-4:2012 Internal combustion engines Piston rings Part 4:General specifications Data Limite: 2012-05-28 TC 22 DIS 6621-5:2011 Internal combustion engines Piston rings Part 5: Quality requirements Data Limite: 2012-05-21 TC 22 DIS 6623:2012 Internal combustion engines Piston rings Scraper rings made of cast iron Data Limite: 2012-07-15

TC 22 DIS 6624-2:2012 Internal combustion engines Piston rings Part 2: Half keystone rings made of cast iron Data Limite: 2012-08-29 TC 22 DIS 6624-4:2012 Internal combustion engines Piston rings Part 4: Half keystone rings made of steel Data Limite: 2012-08-29 TC 22 DIS 6626-2:2012 Internal combustion engines Piston rings Part 2: Coil-spring-loaded oil control rings of narrow width made of cast iron Data Limite: 2012-07-21 TC 22 DIS 6722-2:2011 Road vehicles 60 V and 600 V single-core cables Part 2: Dimensions test methods and requirements for aluminium conductor cables Data Limite: 2012-05-15 TC 22 DIS 8820-2:2012 Road vehicles Fuse-links Part 2: User's guide Data Limite: 2012-07-27 TC 22 DIS 8820-9:2012 Road vehicles Fuse-links Part 9: Fuse-links with shortened tabs (Type D) Data Limite: 2012-05-28 TC 22 DIS 10924-2:2011 Road vehicles Circuit breakers Part 2: User's guide Data Limite: 2012-05-16 TC 22 DIS 11992-2:2011 Road vehicles Interchange of digital information on electrical connections between towing and towed vehicles Part 2: Application layer for brakes and running gear Data Limite: 2012-05-12 TC 22 DIS 11992-4:2012 Road vehicles Interchange of digital information on electrical connections between towing and towed vehicles Part 4: Diagnostic communication Data Limite: 2012-07-21 TC 22 DIS 12619-1:2012 Road vehicles Compressed Gaseous Hydrogen (CGH2) and Hydrogen/Natural Gas blend fuel system components Part 1: General requirements and definitions Data Limite: 2012-06-06 TC 22 DIS 12619-2:2012 Road vehicles Compressed Gaseous Hydrogen (CGH2) and Hydrogen/Natural Gas blend fuel system components Part 2: Performance and general test methods Data Limite: 2012-06-06 TC 22 DIS 12619-3:2012 Road vehicles Compressed Gaseous Hydrogen (CGH2) and Hydrogen/Natural Gas blend fuel system components Part



3: Pressure regulator Data Limite: 2012-06-06 TC 22 DIS 13044-2:2012 Road vehicles Fully automatic coupling systems 24 V (FACS) for heavy commercial vehicle combinations Part 2: 50 mm fifth wheel couplings - Electrical and pneumatic interface Data Limite: 2012-07-28 TC 22 DIS 14229-5:2012 Road vehicles Unified diagnostic services (UDS) Part 5: Unified diagnostic services on Internet Protocol implementation (UDSonIP) Data Limite: 2012-08-28 TC 22 DIS 14230-2:2012 Road vehicles Diagnostic communication over K-Line (DoK-Line) Part 2: Data link layer Data Limite: 2012-08-28 TC 22 DIS 15830-1:2012 Road vehicles Design and performance specifications for the WorldSID 50th percentile male side-impact dummy Part 1: Terminology and rationale Data Limite: 2012-08-16 TC 22 DIS 15830-2:2012 Road vehicles Design and performance specifications for the WorldSID 50th percentile male side-impact dummy Part 2: Mechanical subsystems Data Limite: 2012-08-16 TC 22 DIS 15830-3:2012 Road vehicles Design and performance specifications for the WorldSID 50th percentile male side-impact dummy Part 3: Electronic subsystems Data Limite: 2012-08-16 TC 22 DIS 15830-4:2012 Road vehicles Design and performance specifications for the WorldSID 50th percentile male side-impact dummy Part 4: User's manual Data Limite: 2012-08-16 TC 22 DIS 17458-1:2012 Road vehicles FlexRay communications system Part 1: General information and use case definition Data Limite: 2012-06-12 TC 22 DIS 17458-2:2012 Road vehicles FlexRay communications system Part 2: Data link layer specification Data Limite: 2012-06-12 TC 22 DIS 17458-3:2012 Road vehicles FlexRay communications system Part 3: Data link layer conformance test specification Data Limite: 2012-06-12 TC 22 DIS 17458-4:2012 Road vehicles FlexRay communications system Part 4: Electrical physical layer specification

Data Limite: 2012-06-12 TC 22 DIS 17458-5:2012 Road vehicles FlexRay communications system Part 5: Electrical physical layer conformance test specification Data Limite: 2012-06-12 TC 22 DIS 18669-1:2012 Internal combustion engines Piston pins Part 1: General specifications Data Limite: 2012-06-06 TC 22 DIS 23274-1:2011 Hybrid-electric road vehicles Exhaust emissions and fuel consumption measurements Part 1: Non-externally chargeable vehicles Data Limite: 2012-05-20 TC 22 FDIS 27145-2:2012 Road vehicles Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements Part 2: Common data dictionary Data Limite: 2012-06-04 TC 22 FDIS 27145-3:2012 Road vehicles Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements Part 3: Common message dictionary Data Limite: 2012-06-04 TC 23 FDIS 4254-12:2012 Agricultural machinery Safety Part 12: Rotary disc and drum mowers and flail mowers Data Limite: 2012-05-15 TC 23 FDIS 4254-13:2012 Agricultural machinery Safety Part 13: Large rotary mowers Data Limite: 2012-06-13 TC 23 DIS 5700:2012 Tractors for agriculture and forestry Roll-over protective structures Static test method and acceptance conditions Data Limite: 2012-09-18 TC 23 ISO 6534:2007 /DAM 1:2011 Forestry machinery Portable chain-saw hand-guards Mechanical strength AMENDMENT 1 Data Limite: 2012-05-12 TC 23 DIS 9912-3:2012 Agricultural irrigation equipment Filters Part 3: Automatic self-cleaning strainer-type filters Data Limite: 2012-09-10 TC 23 DIS 12140:2011 Agricultural machinery Agricultural trailers and trailed equipment Drawbar jacks Data Limite: 2012-05-22



TC 23 DIS 12933:2012 Agricultural tractors Safety and performance requirements for braking Data Limite: 2012-06-27 TC 23 DIS 13693-1:2012 Irrigation equipment Safety devices for chemigation Part 1: Small plastics valves for chemigation Data Limite: 2012-07-23 TC 23 DIS 16236:2011 Crop protection equipment Test method for evaluation of drainable volume Data Limite: 2012-05-22 TC 23 FDIS 17101-1:2012 Agricultural machinery Thrown-object test and acceptance criteria Part 1: Rotary mowers Data Limite: 2012-05-15 TC 23 FDIS 17101-2:2012 Agricultural machinery Thrown-object test and acceptance criteria Part 2: Flail mowers Data Limite: 2012-05-15 TC 23 DIS 19932-1:2011 Equipment for crop protection Knapsack sprayers Part 1: Safety and environmental requirements Data Limite: 2012-05-22 TC 23 DIS 19932-2:2011 Equipment for crop protection Knapsack sprayers Part 2: Test methods Data Limite: 2012-05-22 TC 23 FDIS 22369-3:2012 Crop protection equipment Drift classification of spraying equipment Part 3: Potential spray drift measurement for field crop sprayers by the use of a test bench Data Limite: 2012-05-15 TC 24 FDIS 13099-1:2012 Colloidal systems Methods for zeta-potential determination Part 1: Electroacoustic and electrokinetic phenomena Data Limite: 2012-06-03 TC 24 FDIS 13099-2:2012 Colloidal systems Methods for zeta-potential determination Part 2: Optical methods Data Limite: 2012-06-03 TC 24 DIS 26824:2012 Particle characterization of particulate systems Vocabulary Data Limite: 2012-07-06

TC 27 FDIS 501:2012 Hard coal Determination of the crucible swelling number Data Limite: 2012-06-20 TC 28 DIS 3810:2012 Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels General requirements for automatic tank thermometers on board marine carriers and floating storage Data Limite: 2012-06-25 TC 28 DIS 4261:2012 Petroleum products Fuels (class F) Specifications of gas turbine fuels for industrial and marine applications Data Limite: 2012-08-28 TC 28 ISO 4264:2007 /DAM 1:2011 Petroleum products Calculation of cetane index of middle-distillate fuels by the four-variable equation AMENDMENT 1 Data Limite: 2012-05-08 TC 28 DIS 9162:2012 Petroleum products Fuels (class F) Liquefied petroleum gases - Specifications Data Limite: 2012-09-27 TC 28 FDIS 12152:2012 Lubricants, industrial oils and related products Determination of the foaming and air release properties of industrial gear oils using a spur gear test rig Flender foam test procedure Data Limite: 2012-06-04 TC 28 DIS 16384:2012 Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels Dymethylether (DME) Measurement and calculation on boards ships Data Limite: 2012-08-01 TC 29 DIS 1832:2012 Indexable inserts for cutting tools Designation Data Limite: 2012-07-02 TC 29 DIS 5609-1:2012 Tool holders for internal turning with cylindrical shank for indexable inserts Part 1: Designation, styles, dimensions and calculation for corrections Data Limite: 2012-07-02 TC 29 DIS 5609-2:2012 Tool holders for internal turning with cylindrical shank for indexable inserts Part 2: Style F Data Limite: 2012-07-02 TC 29 DIS 5609-3:2012 Tool holders for internal turning with cylindrical shank for indexable inserts Part 3: Style K Data Limite: 2012-07-02



TC 29 DIS 5609-4:2012 Tool holders for internal turning with cylindrical shank for indexable inserts Part 4: Style L Data Limite: 2012-07-02 TC 29 DIS 5609-5:2012 Tool holders for internal turning with cylindrical shank for indexable inserts Part 5: Style U Data Limite: 2012-07-02 TC 29 DIS 5609-6:2012 Tool holders for internal turning with cylindrical shank for indexable inserts Part 6: Style Q Data Limite: 2012-07-02 TC 29 DIS 6344-3:2011 Coated abrasives Grain size analysis Part 3: Determination of grain size distribution of microgrits P240 to P2500 Data Limite: 2012-05-12 TC 29 FDIS 9766:2012 Drills with indexable inserts Cylindrical shanks with a parallel flat Data Limite: 2012-06-21 TC 29 DIS 11529:2012 Milling cutters Designation Shank-type and bore type milling cutters of solid or tipped design or with indexable cutting edges Data Limite: 2012-08-09 TC 29 FDIS 15917:2012 Solid ball-nosed end mills with cylindrical shanks made of carbide and ceramic materials Dimensions Data Limite: 2012-06-03 TC 29 ISO 22917:2004 /DAM 1:2011 Superabrasives — Limit deviations and run-out tolerances for grinding wheels with diamond or cubic boron nitride AMENDMENT 1 Data Limite: 2012-05-19 TC 30 FDIS 12242:2012 Measurement of fluid flow in closed conduits Ultrasonic transit-time meters for liquid Data Limite: 2012-06-10 TC 33 DIS 5017:2012 Dense shaped refractory products Determination of bulk density, apparent porosity and true porosity Data Limite: 2012-10-02 TC 33 DIS 16334:2012 Monolithic refractory products Determination of resistance to explosive spalling Data Limite: 2012-09-16 TC 33 DIS 16349:2012 Refractory materials Determination of abrasion resistance at elevated temperature

Data Limite: 2012-09-10 TC 34 DIS 4833-1:2012 Microbiology of food and animal feed Horizontal method for the enumeration of microorganisms Part 1: Colony count at 30 °C by the pour plate technique Data Limite: 2012-07-23 TC 34 DIS 4833-2:2012 Microbiology of food and animal feed Horizontal method for the enumeration of microorganisms Part 2: Colony count at 30 °C by the surface plating technique Data Limite: 2012-07-23 TC 34 FDIS 5530-2:2012 Wheat flour Physical characteristics of doughs Part 2: Determination of rheological properties using an extensograph Data Limite: 2012-06-02 TC 34 FDIS 6498:2012 Animal feeding stuffs Guidelines for sample preparation Data Limite: 2012-05-01 TC 34 ISO 9233-1:2007 /FDAM 1:2012 Cheese, cheese rind and processed cheese Determination of natamycin content Part 1: Molecular absorption spectrometric method for cheese rind AMENDMENT 1 Data Limite: 2012-06-27 TC 34 ISO 9233-2:2007 /FDAM 1:2012 Cheese, cheese rind and processed cheese Determination of natamycin content Part 2: High-performance liquid chromatographic method for cheese, cheese rind and processed cheese AMENDMENT 1 Data Limite: 2012-06-27 TC 34 DIS 9622:2012 Milk and liquid milk products Guidelines for the application of mid-infrared spectrometry Data Limite: 2012-08-12 TC 34 DIS 17758:2012 Instant dried milk Determination of the dispersibility and wettability Data Limite: 2012-08-12 TC 34 ISO 21569:2005 /DAM 1:2012 Foodstuffs Methods of analysis for the detection of genetically modified organisms and derived products Qualitative nucleic acid based methods AMENDMENT 1 Data Limite: 2012-07-09 TC 34 ISO 21570:2005 /DAM 1:2012 Foodstuffs Methods of analysis for the detection of genetically modified organisms and derived products Quantitative nucleic acid based methods AMENDMENT 1 Data Limite: 2012-09-30



TC 35 FDIS 2812-3:2012 Paints and varnishes Determination of resistance to liquids Part 3: Method using an absorbent medium Data Limite: 2012-06-19 TC 35 DIS 3233-2:2012 Paints and varnishes Determination of the percentage volume of non-volatile matter Part 2: Determination by measurement of the dry-film density Data Limite: 2012-09-26 TC 35 FDIS 9117-6:2012 Paints and varnishes Drying tests Part 6: Print-free test Data Limite: 2012-05-29 TC 35 FDIS 13076:2012 Paints and varnishes Lighting and procedure for visual assessments of coatings Data Limite: 2012-06-19 TC 35 FDIS 13632:2012 Binders for paints and varnishes Rosin Sampling and sample preparation for colour measurement Data Limite: 2012-06-19 TC 35 DIS 15528:2011 Paints, varnishes and raw materials for paints and varnishes Sampling Data Limite: 2012-05-22 TC 35 DIS 16474-1:2012 Paints and varnishes Methods of exposure to laboratory light sources Part 1: General guidance Data Limite: 2012-07-16 TC 35 DIS 16474-2:2012 Paints and varnishes Methods of exposure to laboratory light sources Part 2: Xenon-arc lamps Data Limite: 2012-07-16 TC 35 DIS 16474-3:2012 Paints and varnishes Methods of exposure to laboratory light sources Part 3: Fluorescent UV lamps Data Limite: 2012-07-16 TC 35 DIS 16474-4:2012 Paints and varnishes Methods of exposure to laboratory light sources Part 4: Carbon-arc lamps Data Limite: 2012-07-16 TC 35 DIS 16925:2012 Paints and varnishes Determination of the resistance of coatings to high-pressure water-jetting Data Limite: 2012-09-26 TC 35 DIS 16927:2012 Paints and varnishes Determination of the overcoatability and recoatability of a coating Data Limite: 2012-09-26

TC 37 FDIS 10241-2:2012 Terminological entries in standards Part 2: Adoption of standardized terminological entries Data Limite: 2012-06-20 TC 37 FDIS 24612:2012 Language resource management Linguistic annotation framework (LAF) Data Limite: 2012-05-28 TC 37 FDIS 26162:2012 Systems to manage terminology, knowledge and content Design, implementation and maintenance of terminology management systems Data Limite: 2012-05-30 TC 38 DIS 1833-22:2011 Textiles Quantitative chemical analysis Part 22: Mixtures of viscose or certain types of cupro or modal or lyocell and flax fibres (method using formic acid and zinc chloride) Data Limite: 2012-05-08 TC 38 DIS 1833-25:2011 Textiles Quantitative chemical analysis Part 25: Mixtures of polyester and some other fibres (method using trichloracetic acid and chloroform) Data Limite: 2012-05-08 TC 38 FDIS 4404-1:2012 Petroleum and related products Determination of the corrosion resistance of fire-resistant hydraulic fluids Part 1: Water-containing fluids Data Limite: 2012-06-12 TC 38 FDIS 6938:2012 Textiles Natural fibres Generic names and definitions Data Limite: 2012-06-05 TC 38 FDIS 12027:2012 Textiles Cotton-fibre stickiness Detection of sugar by colour reaction Data Limite: 2012-05-22 TC 39 DIS 230-2:2011 Test code for machine tools Part 2: Determination of accuracy and repeatability of positioning of numerically controlled axes Data Limite: 2012-05-12 TC 39 ISO 230-10:2011 /DAM 1:2011 Test code for machine tools Part 10: Determination of the measuring performance of probing systems of numerically controlled machine tools AMENDMENT 1: Measuring performance with scanning probes Data Limite: 2012-05-21 TC 39 DIS 10791-1:2012 Test conditions for machining centres Part 1: Geometric tests for machines with horizontal spindle (horizontal



Z-axis) Data Limite: 2012-07-14 TC 39 DIS 10791-6:2012 Test conditions for machining centres Part 6: Accuracy of speeds and interpolations Data Limite: 2012-07-23 TC 39 DIS 10791-7:2012 Test conditions for machining centres Part 7: Accuracy of a finished test piece Data Limite: 2012-07-14 TC 41 DIS 1081:2012 Belt drives V-belts and V-ribbed belts, and corresponding grooved pulleys Vocabulary Data Limite: 2012-08-27 TC 41 DIS 1813:2012 Belt drives V-ribbed belts, joined V-belts and V-belts including wide section belts and hexagonal belts Electrical conductivity of antistatic belts: Characteristics and methods of test Data Limite: 2012-09-21 TC 41 ISO 9856:2003 /FDAM 1:2012 Conveyor belts Determination of elastic and permanent elongation and calculation of elastic modulus AMENDMENT 1 Data Limite: 2012-06-05 TC 41 DIS 11749:2012 Belt drive V-ribbed belts for the automotive industry Fatigue test Data Limite: 2012-08-05 TC 41 DIS 24035:2012 Belt drives Frictional drive belts for the agricultural industry and corresponding pulleys Dimensions Data Limite: 2012-09-26 TC 42 DIS 15781:2012 Photografy - Digital cameras - Measuring shooting time lag, shutter release time lag, shooting rate, and start-up time Data Limite: 2012-07-01 TC 42 FDIS 18926:2012 Imaging materials - Information stored on magneto-optical (MO) discs - Method for estimating the life expectancy based on the effects of temperature and relative humidity Data Limite: 2012-05-16 TC 42 DIS 22028-2:2012 Photography and graphic technology Extended colour encodings for digital image storage, manipulation and interchange Part 2: Reference output medium metric RGB colour image encoding (ROMM RGB) Data Limite: 2012-08-26 TC 43 DIS 362-1:2012 Measurement of noise emitted by accelerating road

vehicles Engineering method Part 1: M and N categories Data Limite: 2012-08-13 TC 43 DIS 16283-1:2012 Acoustics Field measurement of sound insulation in buildings and of building elements Part 1: Airborne sound insulation Data Limite: 2012-09-12 TC 44 ISO 5172:2006 /FDAM 1:2012 Gas welding equipment Blowpipes for gas welding, heating and cutting Specifications and tests AMENDMENT 1 Data Limite: 2012-06-26 TC 44 DIS 14732:2012 Welding personnel Qualification testing of welding operators for fully mechanized welding and weld setters for fully mechanized welding and automatic welding of metallic materials Data Limite: 2012-05-22 TC 44 FDIS 15614-13:2012 Specification and qualification of welding procedures for metallic materials Welding procedure test Part 13: Upset (resistance butt) and flash welding Data Limite: 2012-05-29 TC 44 DIS 15615:2012 Gas welding equipment Acetylene manifold systems for welding, cutting and allied processes Safety requirements in high-pressure devices Data Limite: 2012-05-15 TC 45 DIS 3303-1:2012 Rubber- or plastics-coated fabrics Determination of bursting strength Part 1: Steel-ball method Data Limite: 2012-05-08 TC 45 DIS 3303-2:2012 Rubber- or plastics-coated fabrics Determination of bursting strength Part 2: Hydraulic method Data Limite: 2012-05-08 TC 45 DIS 3385:2012 Flexible cellular polymeric materials Determination of fatigue by constant-load pounding Data Limite: 2012-08-22 TC 45 FDIS 4652:2012 Rubber compounding ingredients Carbon black Determination of specific surface area by nitrogen adsorption methods - Single-point procedures Data Limite: 2012-06-03 TC 45 DIS 5892:2012 Rubber building gaskets Materials for preformed solid vulcanized structural gaskets Specification Data Limite: 2012-08-16 TC 45 ISO 11193-1:2008 /FDAM 1:2012 Single-use medical examination gloves Part 1: Specification for gloves made from rubber latex or



rubber solution AMENDMENT 1 Data Limite: 2012-06-12 TC 45 ISO 12243:2003 /DAM 1:2012 Medical gloves made from natural rubber latex Determination of water-extractable protein using the modified Lowry method AMENDMENT 1 Data Limite: 2012-09-12 TC 45 DIS 14285:2012 Rubber and plastics gloves for food services Limits for extractable substances Data Limite: 2012-06-30 TC 45 DIS 17278:2012 Rubber, raw natural Determination of the gel content of technically specified rubber (TSR) Data Limite: 2012-06-12 TC 45 FDIS 18898:2012 Rubber Calibration and verification of hardness testers Data Limite: 2012-06-20 TC 45 FDIS 21461:2012 Rubber Determination of the aromaticity of oil in vulcanized rubber compounds Data Limite: 2012-05-13 TC 45 FDIS 27588:2012 Rubber, vulcanized or thermoplastic Determination of dead-load hardness using the very low rubber hardness (VLRH) scale Data Limite: 2012-06-11 TC 46 FDIS 13008:2012 Information and documentation - Digital records conversion and migration process Data Limite: 2012-05-06 TC 46 DIS 25964-2:2011 Information and documentation - Thesauri and interoperability with other vocabularies Part 2: Interoperability with other vocabularies (Rev. of ISO 2788:1986 and ISO 5964:1985) Data Limite: 2012-05-14 TC 54 FDIS 3528:2012 Essential oil of mandarin, Italian type (Citrus reticulata Blanco) Data Limite: 2012-06-02 TC 54 DIS 4716:2012 Essential oil of vetiver [Vetiveria zizanioides (L.) Nash] Data Limite: 2012-06-17 TC 54 DIS 4719:2012 Essential oil of spike lavender (Lavandula latifolia (L.f.) Medikus), Spanish type Data Limite: 2012-06-13

TC 54 DIS 9235:2012 Aromatic natural raw materials Vocabulary Data Limite: 2012-09-26 TC 54 DIS 10115:2012 Essential oil of tarragon (Artemisia dracunculus L.), French type Data Limite: 2012-05-12 TC 58 DIS 3807:2012 Gas cylinders Acetylene cylinders Basic requirements and type testing Data Limite: 2012-09-05 TC 58 DIS 11439:2012 Gas cylinders High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles Data Limite: 2012-05-29 TC 58 DIS 12209:2012 Gas cylinders Outlet connections for gas cylinder valves for compressed breathable air Data Limite: 2012-07-23 TC 58 ISO 15245-1:2001 /DAM 1:2012 Bouteilles à gaz Filetages parallèles pour le raccordement des robinets sur les bouteilles à gaz Partie 1: Spécifications AMENDEMENT 1 Data Limite: 2012-09-19 TC 59 FDIS 6927:2012 Buildings and civil engineering works Sealants Vocabulary Data Limite: 2012-06-05 TC 59 FDIS 15686-2:2012 Buildings and constructed assets Service life planning Part 2: Service life prediction procedures Data Limite: 2012-05-12 TC 59 DIS 16354:2012 Guidelines for Knowledge Libraries and Object Libraries Data Limite: 2012-07-28 TC 61 DIS 75-1:2012 Plastics Determination of temperature of deflection under load Part 1: General test method Data Limite: 2012-06-12 TC 61 DIS 75-2:2011 Plastics Determination of temperature of deflection under load Part 2: Plastics and ebonite Data Limite: 2012-05-22 TC 61 ISO 178:2010 /DAM 1:2011 Plastics Determination of flexural properties AMENDMENT 1 Data Limite: 2012-05-22



TC 61 ISO 180:2000 /DAM 2:2012 Plastics Determination of Izod impact strength AMENDMENT 2: Precision data Data Limite: 2012-06-12 TC 61 DIS 306:2012 Plastics Thermoplastic materials Determination of Vicat softening temperature (VST) Data Limite: 2012-06-12 TC 61 ISO 899-1:2003 /DAM 1:2012 Plastics Determination of creep behaviour Part 1: Tensile creep AMENDMENT 1 Data Limite: 2012-07-09 TC 61 ISO 899-2:2003 /DAM 1:2012 Plastics Determination of creep behaviour Part 2: Flexural creep by three-point loading AMENDMENT 1 Data Limite: 2012-07-09 TC 61 FDIS 1183-1:2012 Plastics Methods for determining the density of non-cellular plastics Part 1: Immersion method, liquid pyknometer method and titration method Data Limite: 2012-05-01 TC 61 ISO 1628-1:2009 /FDAM 1:2012 Plastics Determination of the viscosity of polymers in dilute solution using capillary viscometers Part 1: General principles AMENDMENT 1 Data Limite: 2012-06-12 TC 61 FDIS 3673-2:2012 Plastics Epoxy resins Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins Data Limite: 2012-06-26 TC 61 DIS 10123:2012 Adhesives Determination of shear strength of anaerobic adhesives using pin-and-collar specimens Data Limite: 2012-06-10 TC 61 FDIS 10210:2012 Plastics Methods for the preparation of samples for biodegradation testing of plastic materials Data Limite: 2012-05-13 TC 61 DIS 10364:2012 Structural adhesives Determination of the pot life (working life) of multi-component adhesives Data Limite: 2012-06-10 TC 61 DIS 11357-2:2012 Plastics Differential scanning calorimetry (DSC) Part 2: Determination of glass transition temperature and glass transition step height Data Limite: 2012-08-01

TC 61 DIS 11357-5:2012 Plastics Differential scanning calorimetry (DSC) Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion Data Limite: 2012-07-16 TC 61 DIS 12856:2012 Plastic railway sleepers (railroad ties) Data Limite: 2012-08-02 TC 61 DIS 15791-1:2012 Plastics Development and use of intermediate-scale fire tests for plastics products Part 1: General guidance Data Limite: 2012-09-12 TC 61 FDIS 16014-1:2012 Plastics Determination of average molecular mass and molecular mass distribution of polymers using size -exclusion chromatography Part 1: General principles Data Limite: 2012-06-05 TC 61 FDIS 16014-2:2012 Plastics Determination of average molecular mass and molecular mass distribution of polymers using sizeexclusion chromatography Part 2: Universal calibration method Data Limite: 2012-06-05 TC 61 FDIS 16014-3:2012 Plastics Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography Part 3: Low-temperature method Data Limite: 2012-06-05 TC 61 FDIS 16014-4:2012 Plastics Determination of average molecular mass and molecular mass distribution of polymers using sizeexclusion chromatography Part 4: High-temperature method Data Limite: 2012-06-05 TC 61 FDIS 16014-5:2012 Plastics Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography Part 5: Method using light-scattering detection Data Limite: 2012-06-05 TC 61 DIS 16525-1:2012 Adhesives Test methods for isotropically electrically conducting adhesives Part 1: General test methods Data Limite: 2012-08-01 TC 61 DIS 16525-2:2012 Adhesives Test methods for isotropically electrically conducting adhesives Part 2: Determination of electrical characteristics Data Limite: 2012-08-01



TC 61 DIS 16525-3:2012 Adhesives Test methods for isotropically electrically conducting adhesives Part 3: Determination of heat transfer properties Data Limite: 2012-08-01 TC 61 DIS 16525-4:2012 Adhesives Test methods for isotropically electrically conducting adhesives Part 4: Determination of shear strength and electrical resistance using rigid-to-rigid bonded assemblies Data Limite: 2012-08-01 TC 61 DIS 16525-5:2012 Adhesives Test methods for isotropically electrically conducting adhesives Part 5: Shear fatigue testing Data Limite: 2012-08-01 TC 61 DIS 16525-6:2012 Adhesives Test methods for isotropically electrically conducting adhesives Part 6: Pendulum-type impact testing Data Limite: 2012-08-01 TC 61 DIS 16525-7:2012 Adhesives Test methods for isotropically electrically conducting adhesives Part 7: Environmental test methods Data Limite: 2012-08-01 TC 61 DIS 16525-8:2012 Adhesives Test methods for isotropically electrically conducting adhesives Part 8: Electrochemical-migration test methods Data Limite: 2012-08-01 TC 61 FDIS 17088:2012 Specifications for compostable plastics Data Limite: 2012-05-16 TC 61 DIS 17178:2012 Adhesives Adhesives for bonding parquet to subfloor Test methods and minimum requirements Data Limite: 2012-06-24 TC 61 FDIS 17556:2012 Plastics Determination of the ultimate aerobic biodegradability of plastic materials in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved Data Limite: 2012-06-19 TC 61 DIS 29221:2012 Plastics — Determination of mode I plane-strain crack-arrest toughness Data Limite: 2012-05-15 TC 61 DIS 30021:2012 Plastics Burning behaviour Intermediate-scale fireresistance testing of fibre-reinforced polymer composites Data Limite: 2012-08-12

TC 67 DIS 13628-6:2012 Petroleum and natural gas industries Design and operation of subsea production systems Part 6: Subsea production control systems Data Limite: 2012-06-12 TC 67 DIS 14313:2012 Petroleum and natural gas industries Pipeline transportation systems Pipeline valves Data Limite: 2012-09-18 TC 67 DIS 15589-1:2012 Petroleum, petrochemical and natural gas industries Cathodic protection of pipeline systems Part 1: On-land pipelines Data Limite: 2012-08-28 TC 67 ISO 19902:2007 /DAM 1:2012 Petroleum and natural gas industries Fixed steel offshore structures AMENDMENT 1 Data Limite: 2012-09-12 TC 67 FDIS 19905-1:2012 Petroleum and natural gas industries Site-specific assessment of mobile offshore units Part 1: Jack-ups Data Limite: 2012-05-15 TC 67 DIS 28300:2011 Petroleum, petrochemical and natural gas industries Venting of atmospheric and low-pressure storage tanks Data Limite: 2012-05-22 TC 68 DIS 1004-1:2012 Information processing Magnetic ink character recognition Part 1: Print specifications for E13B Data Limite: 2012-07-01 TC 68 DIS 1004-2:2012 Information processing Magnetic ink character recognition Part 2: Print specifications for CMC7 Data Limite: 2012-07-01 TC 68 DIS 10383:2011 Securities and related financial instruments Codes for exchanges and market identification (MIC) Data Limite: 2012-05-13 TC 68 FDIS 20022-1:2012 Financial services Universal financial industry message scheme Part 1: Metamodel Data Limite: 2012-06-04 TC 68 FDIS 20022-2:2012 Financial services Universal financial industry message scheme Part 2: UML profile Data Limite: 2012-06-04 TC 68 FDIS 20022-4:2012 Financial services Universal financial industry message



scheme Part 4: XML Schema generation Data Limite: 2012-06-04 TC 68 FDIS 20022-5:2012 Financial services Universal financial industry message scheme Part 5: Reverse engineering Data Limite: 2012-06-04 TC 68 FDIS 20022-6:2012 Financial services Universal financial industry message scheme Part 6: Message transport characteristics Data Limite: 2012-06-04 TC 68 FDIS 20022-7:2012 Financial services Universal financial industry message scheme Part 7: Registration Data Limite: 2012-06-04 TC 68 FDIS 20022-8:2012 Financial services Universal financial industry message scheme Part 8: ASN.1 generation Data Limite: 2012-06-06 TC 69 DIS 3951-1:2012 Sampling procedures for inspection by variables Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL Data Limite: 2012-07-14 TC 69 DIS 3951-2:2012 Sampling procedures for inspection by variables Part 2: General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics Data Limite: 2012-07-14 TC 69 FDIS 11843-7:2012 Capability of detection Part 7: Methodology based on stochastic properties of instrumental noise Data Limite: 2012-05-22 TC 70 DIS 4548-5:2012 Full-flow lubricating oil filters for internal combustion engines Part 5: Method of test for cold start simulation and hydraulic pulse durability Data Limite: 2012-06-11 TC 71 DIS 1920-11:2012 Testing of concrete Part 11: Determination of the chloride resistance of concrete, unidirectional diffusion Data Limite: 2012-07-29 TC 71 DIS 1920-12:2012 Testing of concrete Part 12: Determination of the carbonation resistance of concrete - Accelerated carbonation method Data Limite: 2012-07-29

TC 71 FDIS 13315-1:2011 Environmental management for concrete and concrete structures Part 1: General principles Data Limite: 2013-01-02 TC 76 ISO 8536-4:2010 /DAM 1:2011 Infusion equipment for medical use Part 4: Infusion sets for single use, gravity feed AMENDMENT 1 Data Limite: 2012-05-22 TC 79 FDIS 6362-1:2012 Wrought aluminium and aluminium alloys Extruded rods/bars, tubes and profiles Part 1: Technical conditions for inspection and delivery Data Limite: 2012-06-11 TC 79 FDIS 6362-2:2012 Wrought aluminium and aluminium alloys Extruded rods/bars, tubes and profiles Part 2: Mechanical properties Data Limite: 2012-06-11 TC 79 FDIS 6362-3:2012 Wrought aluminium and aluminium alloys Extruded rods/bars, tubes and profiles Part 3: Extruded rectangular bars - Tolerances on shape and dimensions Data Limite: 2012-06-11 TC 79 FDIS 6362-4:2012 Wrought aluminium and aluminium alloys Extruded rods/bars, tubes and profiles Part 4: Profiles - Tolerances on shape and dimensions Data Limite: 2012-06-11 TC 79 FDIS 6362-5:2012 Wrought aluminium and aluminium alloys Extruded rods/bars, tubes and profiles Part 5: Round, square and hexagonal bars - Tolerances on shape and dimensions Data Limite: 2012-06-11 TC 79 FDIS 6362-6:2012 Wrought aluminium and aluminium alloys Extruded rods/bars, tubes and profiles Part 6: Round, square, rectangular and hexagonal tubes - Tolerances on shape and dimensions Data Limite: 2012-06-11 TC 79 FDIS 6362-7:2012 Wrought aluminium and aluminium alloys Extruded rods/bars, tubes and profiles Part 7: Chemical composition Data Limite: 2012-06-11 TC 79 FDIS 6363-1:2012 Wrought aluminium and aluminium alloys Cold-drawn rods/bars, tubes and wires Part 1: Technical conditions for inspection and delivery Data Limite: 2012-06-25



TC 79 FDIS 6363-2:2012 Wrought aluminium and aluminium alloys Cold-drawn rods/bars and tubes and wires Part 2: Mechanical properties Data Limite: 2012-06-25 TC 79 FDIS 6363-3:2012 Wrought aluminium and aluminium alloys Cold-drawn rods/bars, tubes and wires Part 3: Drawn round bars and wires -Tolerances on form and dimensions (symmetric plus and minus tolerances on diameter) Data Limite: 2012-06-25 TC 79 FDIS 6363-4:2012 Wrought aluminium and aluminium alloys Cold-drawn rods/bars, tubes and wires Part 4: Drawn rectangular bars and wires -Tolerances on form and dimensions Data Limite: 2012-06-25 TC 79 FDIS 6363-5:2012 Wrought aluminium and aluminium alloys Cold-drawn rods/bars, tubes and wires Part 5: Drawn square and hexagonal bars and wires - Tolerances on form and dimensions Data Limite: 2012-06-25 TC 79 FDIS 6363-6:2012 Wrought aluminium and aluminium alloys Cold-drawn rods/bars, tubes and wires Part 6: Drawn round tubes - Tolerances on form and dimensions Data Limite: 2012-06-25 TC 79 DIS 7583:2012 Anodizing of aluminium and its alloys Terms and definitions Data Limite: 2012-07-27 TC 79 DIS 28340:2012 Combined coatings on aluminium General specifications for combined coatings of electrophoretic organic coatings and anodic oxidation coatings on aluminium Data Limite: 2012-06-20 TC 83 DIS 5902:2012 Alpine skis Determination of elastic properties Data Limite: 2012-06-17 TC 83 DIS 6265:2012 Alpine skis Determination of deformation load and breaking load Data Limite: 2012-06-13 TC 83 DIS 6266:2012 Alpine skis Determination of fatigue indexes Cyclic loading test Data Limite: 2012-06-13 TC 83 DIS 9462:2012 Alpine ski-bindings Requirements and test methods Data Limite: 2012-06-06

TC 83 FDIS 9465:2012 Alpine ski-bindings Lateral release under impact loading Test method Data Limite: 2012-05-28 TC 83 DIS 20957-1:2012 Stationary training equipment Part 1: General safety requirements and test methods Data Limite: 2012-07-09 TC 85 FDIS 11665-1:2012 Measurement of radioactivity in the environment Air: radon-222 Part 1: Origins of radon and its short-lived decay products and associated measurement methods Data Limite: 2012-05-22 TC 85 FDIS 11665-2:2012 Measurement of radioactivity in the environment Air: radon-222 Part 2: Integrated measurement method for determining average potential alpha energy concentration of its short-lived decay products Data Limite: 2012-05-22 TC 85 FDIS 11665-3:2012 Measurement of radioactivity in the environment Air: radon-222 Part 3: Spot measurement method of the potential alpha energy concentration of its short-lived decay products Data Limite: 2012-05-22 TC 85 FDIS 11665-4:2012 Measurement of radioactivity in the environment Air: radon-222 Part 4: Integrated measurement method for determining average activity concentration using passive sampling and delayed analysis Data Limite: 2012-05-22 TC 85 FDIS 11665-5:2012 Measurement of radioactivity in the environment Air: radon-222 Part 5: Continuous measurement method of the activity concentration Data Limite: 2012-05-22 TC 85 FDIS 11665-6:2012 Measurement of radioactivity in the environment Air: radon-222 Part 6: Spot measurement method of the activity concentration Data Limite: 2012-05-22 TC 85 FDIS 11665-7:2012 Measurement of radioactivity in the environment Air: radon-222 Part 7: Accumulation method for estimating surface exhalation rate Data Limite: 2012-05-22 TC 85 DIS 13304:2011 Radiological protection Minimum criteria for electron paramagnetic resonance (EPR) spectroscopy for retrospective dosimetry of ionizing radiation Data Limite: 2012-05-22 TC 85 DIS 15690:2012 Radiological protection Recommendations for dealing



with discrepancies between personal dosimeter systems used in parallel Data Limite: 2012-09-20 TC 85 DIS 16424:2011 Nuclear energy Evaluation of homogeneity of Gd distribution within gadolinium fuel blends and determination of Gd2O3 content in gadolinium fuel pellets by measurements of uranium and gadolinium elements Data Limite: 2012-05-22 TC 85 DIS 18589-7:2012 Measurement of radioactivity in the environment Soil Part 7: In situ measurement of gamma-emitting radionuclides Data Limite: 2012-06-20 TC 85 DIS 19117:2012 Nuclear criticality safety Estimation of the number of fissions of a postulated criticality accident Data Limite: 2012-08-05 TC 85 DIS 19238:2012 Radiation protection Performance criteria for service laboratories performing biological dosimetry by cytogenetics Data Limite: 2012-06-06 TC 85 DIS 28057:2012 Dosimetry with solid thermoluminescence detectors for photon and electron radiations in radiotherapy Data Limite: 2012-06-10 TC 85 DIS 51261:2012 Practice for calibration of routine dosimetry systems for radiation processing Data Limite: 2012-08-16 TC 85 DIS 51631:2012 Practice for use of calorimetric dosimetry systems for electron beam dose measurements and dosimeter calibrations Data Limite: 2012-08-16 TC 85 DIS 52116:2012 Practice for dosimetry for a self-contained dry-storage gammaray irradiator Data Limite: 2012-08-16 TC 86 DIS 16345:2012 Water-cooling towers Testing and rating of thermal performance Data Limite: 2012-09-13 TC 86 DIS 16358-1:2012 Air-cooled air conditioners and air-to-air heat pumps Testing and calculating methods for seasonal performance factors Part 1: Cooling seasonal performance factor Data Limite: 2012-06-13 TC 86 DIS 16358-2:2012 Air-cooled air conditioners and air-to-air heat pumps

Testing and calculating methods for seasonal performance factors Part 2: Heating seasonal performance factor Data Limite: 2012-06-13 TC 86 DIS 16358-3:2012 Air-cooled air conditioners and air-to-air heat pumps Testing and calculating methods for seasonal performance factors Part 3: Annual performance factor Data Limite: 2012-06-13 TC 87 DIS 16419:2012 Cork Visual anomalies of cork stoppers for still wines Data Limite: 2012-06-27 TC 87 DIS 16420:2012 Cork Cork stoppers for still wines Mechanical and physical specifications Data Limite: 2012-08-07 TC 87 DIS 17727:2012 Cork Cork stoppers for still wine Sampling plan for the quality control of cork stoppers Data Limite: 2012-08-15 TC 89 ISO 12466-1:2007 /DAM 1:2011 Plywood Bonding quality Part 1: Test methods AMENDMENT 1 Data Limite: 2012-05-22 TC 89 ISO 18776:2008 /DAM 1:2012 Laminated veneer lumber (LVL) Specifications AMENDMENT 1 Data Limite: 2012-06-05 TC 92 DIS 12468-2:2012 External fire exposure to roofs Part 2: Classification of roofs Data Limite: 2012-08-16 TC 92 DIS 29904:2011 Fire chemistry Generation and measurement of aerosols Data Limite: 2012-05-22 TC 94 DIS 13994:2012 Clothing for protection against liquid chemicals Determination of the resistance of protective clothing materials to penetration by liquids under pressure Data Limite: 2012-08-28 TC 94 DIS 17249:2012 Safety footwear with resistance to chain saw cutting Data Limite: 2012-08-29 TC 94 DIS 17491-5:2011 Protective clothing Test methods for clothing providing protection against chemicals Part 5: Determination of resistance to penetration by a spray of liquid (Manikin spray test) Data Limite: 2012-05-19 TC 96 DIS 4305:2012 Mobile cranes Determination of stability



Data Limite: 2012-06-06 TC 96 DIS 8686-1:2011 Cranes Design principles for loads and load combinations Part 1: General Data Limite: 2012-05-07 TC 96 FDIS 12488-1:2012 Cranes Tolerances for wheels and travel and traversing tracks Part 1: General Data Limite: 2012-06-04 TC 106 FDIS 6876:2012 Dentistry Root canal sealing materials Data Limite: 2012-05-15 TC 106 ISO 7405:2008 /DAM 1:2012 Dentistry Evaluation of biocompatibility of medical devices used in dentistry AMENDMENT 1 Data Limite: 2012-06-19 TC 106 FDIS 13017:2011 Dentistry Magnetic attachments Data Limite: 2012-06-26 TC 106 FDIS 13504:2012 Dentistry General requirements for instruments and related accessories used in dental implant placement and treatment Data Limite: 2012-06-26 TC 106 DIS 16498:2012 Dentistry Minimal dental implant data set for clinical use Data Limite: 2012-09-19 TC 106 DIS 16635-1:2012 Dentistry Dental dam technique Part 1: Hole punch Data Limite: 2012-09-27 TC 106 DIS 29022:2012 Dentistry Adhesion Notched-edge shear bond strength test Data Limite: 2012-08-22 TC 108 DIS 10068:2011 Mechanical vibration and shock Mechanical impedance of the human hand-arm system at the driving point Data Limite: 2012-05-22 TC 108 DIS 20958-1:2012 Condition monitoring and diagnostics of machines Electrical signature analysis Part 1: Three-phase induction motors Data Limite: 2012-07-03 TC 110 FDIS 10896-1:2012 Rough-terrain trucks Safety requirements and verification Part 1: Variable-reach trucks Data Limite: 2012-06-03

TC 110 FDIS 11525-1:2012 Rough-terrain trucks User requirements Part 1: General requirements Data Limite: 2012-06-03 TC 110 DIS 22915-15:2012 Indutrial trucks Verification of stability Part 15: Counterbalanced trucks with articulated steering Data Limite: 2012-09-13 TC 111 FDIS 3076:2012 Round steel short link chains for general lifting purposes Medium tolerance sling chains for chain slings Grade 8 Data Limite: 2012-05-12 TC 114 ISO 6426-2:2002 /DAM 1:2012 Horological vocabulary Part 2: Technical and commercial definitions AMENDMENT 1 Data Limite: 2012-06-06 TC 114 FDIS 13074:2012 Analogue quartz clocks Fitting dimensions of movements to hands Data Limite: 2012-06-19 TC 118 ISO 20643:2005 /FDAM 1:2012 Mechanical vibration Hand-held and hand-guided machinery Principles for evaluation of vibration emission Amendment 1: Accelerometer positions Data Limite: 2012-06-19 TC 119 FDIS 2739:2012 Sintered metal bushings Determination of radial crushing strength Data Limite: 2012-05-01 TC 119 DIS 13517:2012 Metallic powders Determination of flowrate by means of a calibrated funnel (Gustavsson flowmeter) Data Limite: 2012-08-01 TC 119 FDIS 13944:2012 Lubricated metal-powder mixes Determination of lubricant content Soxhlet extraction method Data Limite: 2012-07-12 TC 119 FDIS 22068:2012 Sintered-metal injection-moulded materials Specifications Data Limite: 2012-05-23 TC 121 DIS 5356-1:2012 Anaesthetic and respiratory equipment Conical connectors Part 1: Cones and sockets Data Limite: 2012-09-05 TC 121 DIS 5367:2012 Anaesthetic and respiratory equipment Breathing sets and connectors



Data Limite: 2012-07-23 TC 121 ISO 8359:1996 /FDAM 1:2012 Oxygen concentrators for medical use Safety requirements AMENDMENT 1 Data Limite: 2012-06-12 TC 121 DIS 10079-2:2012 Medical suction equipment Part 2: Manually powered suction equipment Data Limite: 2012-07-23 TC 121 DIS 10079-3:2012 Medical suction equipment Part 3: Suction equipment powered from a vacuum or positive pressure gas source Data Limite: 2012-08-01 TC 121 DIS 16571:2012 Systems for evacuation of plume generated by medical devices Data Limite: 2012-09-23 TC 121 DIS 27427:2012 Anaesthetic and respiratory equipment Nebulizing systems and components Data Limite: 2012-09-05 TC 121 DIS 80601-2-67:2012 Medical electrical equipment Part 2-67: Particular requirements for basic safety and essential performance of oxygen-conserving equipment Data Limite: 2012-06-26 TC 121 DIS 81060-2:2011 Non-invasive sphygmomanometers Part 2: Clinical investigation of automated measurement type Data Limite: 2012-05-02 TC 127 DIS 3164:2012 Earth-moving machinery Laboratory evaluations of protective structures Specifications for deflection-limiting volume Data Limite: 2012-06-12 TC 127 DIS 6747:2012 Earth-moving machinery Tractor-dozers Terminology and commercial specifications Data Limite: 2012-07-01 TC 127 DIS 7130:2012 Earth-moving machinery Guide to procedure for operator training Data Limite: 2012-07-03 TC 127 DIS 13031:2011 Earth-moving machinery Quick couplers Safety Data Limite: 2012-05-05 TC 127 FDIS 13459:2012 Earth-moving machinery Trainer seat Deflection limiting volume, space envelope and performance

requirements Data Limite: 2012-06-19 TC 130 DIS 12647-1:2011 Graphic technology Process control for the production of half-tone colour separations, proof and production prints Part 1: Parameters and measurement methods Data Limite: 2012-05-15 TC 130 DIS 12647-2:2011 Graphic technology Process control for the production of half-tone colour separations, proof and production prints Part 2: Offset lithographic processes Data Limite: 2012-05-15 TC 130 DIS 12647-3:2011 Graphic technology Process control for the production of half-tone colour separations, proof and production prints Part 3: Coldset offset lithography on newsprint Data Limite: 2012-05-15 TC 131 DIS 1179-1:2012 Connections for general use and fluid power Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Part 1: Threaded ports Data Limite: 2012-09-19 TC 131 DIS 1179-2:2012 Connections for general use and fluid power Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) Data Limite: 2012-09-19 TC 131 ISO 10100:2001 /FDAM 1:2012 Hydraulic fluid power Cylinders Acceptance tests AMENDMENT 1 Data Limite: 2012-06-10 TC 132 DIS 3452-3:2012 Non-destructive testing Penetrant testing Part 3: Reference test blocks Data Limite: 2012-09-12 TC 135 DIS 3452-2:2012 Non-destructive testing Penetrant testing Part 2: Testing of penetrant materials Data Limite: 2012-09-12 TC 135 DIS 5579:2012 Non-destructive testing Radiographic testing of metallic materials using film and X- or gamma rays Basic rules Data Limite: 2012-07-02 TC 135 FDIS 9712:2012 Non-destructive testing Qualification and certification of NDT personnel Data Limite: 2012-05-01 TC 136 DIS 4211-2:2012 Furniture Tests for surface finishes Part 2: Assessment of resistance to wet heat



Data Limite: 2012-06-25 TC 136 DIS 4211-3:2012 Furniture Tests for surface finishes Part 3: Assessment of resistance to dry heat Data Limite: 2012-06-19 TC 138 DIS 18225:2012 Plastics piping systems Multilayer piping systems for outdoor gas installations Specifications for systems Data Limite: 2012-07-14 TC 145 ISO 7001:2007 /DAM 1:2012 Graphical symbols Public information symbols AMENDMENT 1: Symbol PI CF 011: Internet café Data Limite: 2012-09-10 TC 145 ISO 7001:2007 /DAM 4:2012 Graphical symbols Public information symbols AMENDMENT 4: Symbol PI PF 036: Child health care centre Data Limite: 2012-09-10 TC 145 ISO 7001:2007 /DAM 5:2012 Graphical symbols Public information symbols AMENDMENT 5: Symbol PI PF 037: Library Data Limite: 2012-09-10 TC 145 ISO 7001:2007 /DAM 6:2012 Graphical symbols Public information symbols AMENDMENT 6: Symbol PI PF 038: Indoor play area Data Limite: 2012-09-10 TC 145 ISO 7001:2007 /DAM 7:2012 Graphical symbols Public information symbols AMENDMENT 7: Symbol PI PF 039: Packed lunch room Data Limite: 2012-09-10 TC 145 ISO 7001:2007 /DAM 10:2012 Graphical symbols Public information symbols AMENDMENT 10: Symbol PI PF 043: Dentist Data Limite: 2012-09-10 TC 145 ISO 7001:2007 /DAM 11:2012 Graphical symbols Public information symbols AMENDMENT 11: Symbol PI PF 044: Health care centre or doctor Data Limite: 2012-09-10 TC 145 ISO 7001:2007 /DAM 12:2012 Graphical symbols Public information symbols AMENDMENT 12: Symbol PI PF 045: Accessibility, limited walking capability Data Limite: 2012-09-10 TC 145 ISO 7001:2007 /DAM 13:2012 Graphical symbols Public information symbols AMENDMENT 13: Symbol PI PF 046: Accessibility, assistance dog Data Limite: 2012-09-10

TC 145 ISO 7001:2007 /DAM 14:2012 Graphical symbols Public information symbols AMENDMENT 14: Symbol PI PF 047: Accessibility, personal assistant available Data Limite: 2012-09-10 TC 145 ISO 7001:2007 /DAM 15:2012 Graphical symbols Public information symbols AMENDMENT 15: Symbol PI PF 048: Accessibility, hard of hearing Data Limite: 2012-09-10 TC 145 ISO 7001:2007 /DAM 16:2012 Graphical symbols Public information symbols AMENDMENT 16: Symbol PI PF 049: Accessibility, vision impaired Data Limite: 2012-09-10 TC 145 ISO 7001:2007 /DAM 17:2012 Graphical symbols Public information symbols AMENDMENT 17: Symbol PI PF 050: Accessibility, vegetarian food Data Limite: 2012-09-10 TC 145 ISO 7001:2007 /DAM 18:2012 Graphical symbols Public information symbols AMENDMENT 18: Symbol PI PF 051: Accessibility, blind or low vision Data Limite: 2012-09-10 TC 145 ISO 7001:2007 /DAM 20:2012 Graphical symbols Public information symbols AMENDMENT 20: Symbol PI PF 053: Transportation centre Data Limite: 2012-09-10 TC 145 ISO 7001:2007 /DAM 21:2012 Graphical symbols Public information symbols AMENDMENT 21: Symbol PI PF 054: Museum Data Limite: 2012-09-10 TC 145 ISO 7001:2007 /DAM 22:2012 Graphical symbols Public information symbols AMENDMENT 22: Symbol PI SA 003: Indoor swimming pool Data Limite: 2012-09-10 TC 145 ISO 7001:2007 /DAM 23:2012 Graphical symbols Public information symbols AMENDMENT 23: Symbol PI SA 004: Sports hall Data Limite: 2012-09-10 TC 145 ISO 7001:2007 /DAM 24:2012 Graphical symbols Public information symbols AMENDMENT 24: Symbol PI TC 008: Natural area with public access Data Limite: 2012-09-10 TC 145 ISO 7001:2007 /DAM 25:2012 Graphical symbols Public information symbols AMENDMENT 25: Symbol PI TC 009: Hiking trail Data Limite: 2012-09-10



TC 145 ISO 7001:2007 /DAM 26:2012 Graphical symbols Public information symbols AMENDMENT 26: Symbol PI TF 022: Priority seats for elderly people Data Limite: 2012-09-10 TC 145 ISO 7001:2007 /DAM 27:2012 Graphical symbols Public information symbols AMENDMENT 27: Symbol PI TF 023: Priority seats for injured people Data Limite: 2012-09-10 TC 145 ISO 7001:2007 /DAM 28:2012 Graphical symbols Public information symbols AMENDMENT 28: Symbol PI TF 024: Priority seats for people with internal medical conditions Data Limite: 2012-09-10 TC 145 ISO 7001:2007 /DAM 29:2012 Graphical symbols Public information symbols AMENDMENT 29: Symbol PI TF 025: Priority seats for people with small children Data Limite: 2012-09-10 TC 145 ISO 7001:2007 /DAM 30:2012 Graphical symbols Public information symbols AMENDMENT 30: Symbol PI TF 026: Priority seats for expecting mothers Data Limite: 2012-09-10 TC 145 ISO 7001:2007 /DAM 31:2012 Graphical symbols Public information symbols AMENDMENT 31: Symbol PI PF 055: Priority access for elderly people Data Limite: 2012-09-10 TC 145 ISO 7001:2007 /DAM 32:2012 Graphical symbols Public information symbols AMENDMENT 32: Symbol PI PF 056: Priority access for injured people Data Limite: 2012-09-10 TC 145 ISO 7001:2007 /DAM 33:2012 Graphical symbols Public information symbols AMENDMENT 33: Symbol PI PF 057: Priority access for people with internal medical conditions Data Limite: 2012-09-10 TC 145 ISO 7001:2007 /DAM 34:2012 Graphical symbols Public information symbols AMENDMENT 34: Symbol PI PF 058: Priority access for people with small children Data Limite: 2012-09-10 TC 145 ISO 7001:2007 /DAM 35:2012 Graphical symbols Public information symbols AMENDMENT 35: Symbol PI PF 059: Priority access for expecting mothers Data Limite: 2012-09-10 TC 145 ISO 7001:2007 /DAM 36:2012 Graphical symbols Public information symbols AMENDMENT 36: Symbol PI PB 006: Dogs should be

carried Data Limite: 2012-09-10 TC 145 ISO 7001:2007 /DAM 37:2012 Graphical symbols Public information symbols AMENDMENT 37: Symbol PI CF 014: Newsstand/News kiosk/Newsagent Data Limite: 2012-09-10 TC 145 ISO 7001:2007 /DAM 40:2012 Graphical symbols Public information symbols AMENDMENT 40: Symbol PI TC 010: Location for campfires Data Limite: 2012-09-10 TC 145 ISO 7001:2007 /DAM 41:2012 Graphical symbols Public information symbols AMENDMENT 41: Symbol PI TC 011: Bird sanctuary Data Limite: 2012-09-10 TC 145 ISO 7001:2007 /DAM 42:2012 Graphical symbols Public information symbols AMENDMENT 42: Symbol PI TC 012: Wetland reserve Data Limite: 2012-09-10 TC 145 ISO 7001:2007 /DAM 43:2012 Graphical symbols Public information symbols AMENDMENT 43: Symbol PI TC 013: Hot spring or hot tub Data Limite: 2012-09-10 TC 145 ISO 7001:2007 /DAM 44:2012 Graphical symbols Public information symbols AMENDMENT 44: Symbol PI TC 014: Audio tour Data Limite: 2012-09-10 TC 145 ISO 7001:2007 /DAM 45:2012 Graphical symbols Public information symbols AMENDMENT 45: Symbol PI TF 027: Airport bus Data Limite: 2012-09-10 TC 145 ISO 7001:2007 /DAM 46:2012 Graphical symbols Public information symbols AMENDMENT 46: Symbol PI PF 062: Communication in the specified language Data Limite: 2012-09-10 TC 145 ISO 7001:2007 /DAM 47:2012 Graphical symbols Public information symbols AMENDMENT 47: Symbol PI PF 063: Recycling - Aluminium cans Data Limite: 2012-09-10 TC 145 ISO 7001:2007 /DAM 48:2012 Graphical symbols Public information symbols AMENDMENT 48: Symbol PI PF 064: Recycling - Magnetic type of steel Data Limite: 2012-09-10 TC 145 ISO 7001:2007 /DAM 49:2012 Graphical symbols Public information symbols AMENDMENT 49: Symbol PI PF 065: Recycling - Glass Data Limite: 2012-09-10



TC 145 ISO 7001:2007 /DAM 50:2012 Graphical symbols Public information symbols AMENDMENT 50: Symbol PI PF 066: Recycling Data Limite: 2012-09-10 TC 145 ISO 7001:2007 /DAM 51:2012 Graphical symbols Public information symbols AMENDMENT 51: Symbol PI PB 007: Take off your shoes Data Limite: 2012-09-10 TC 145 ISO 7010:2011 /FDAM 85:2012 Graphical symbols Safety colours and safety signs - Registered safety signs AMENDMENT 85: Safety sign E014: Child seat presence and orientation detection system (CPOD) Data Limite: 2012-05-27 TC 145 ISO 7010:2011 /FDAM 86:2012 Graphical symbols Safety colours and safety signs - Registered safety signs AMENDMENT 86: Safety sign E015: Drinking water Data Limite: 2012-05-27 TC 145 ISO 7010:2011 /FDAM 87:2012 Graphical symbols Safety colours and safety signs - Registered safety signs AMENDMENT 87: Safety sign E020: Emergency stop button Data Limite: 2012-05-27 TC 145 ISO 7010:2011 /FDAM 89:2012 Graphical symbols Safety colours and safety signs - Registered safety signs AMENDMENT 89: Safety sign E022: Door opens by pushing on the left-hand side Data Limite: 2012-05-27 TC 145 ISO 7010:2011 /FDAM 90:2012 Graphical symbols Safety colours and safety signs - Registered safety signs AMENDMENT 90: Safety sign E023: Door opens by pushing on the right-hand side Data Limite: 2012-05-27 TC 145 ISO 7010:2011 /FDAM 91:2012 Graphical symbols Safety colours and safety signs - Registered safety signs AMENDMENT 91: Safety sign M027: Check guard Data Limite: 2012-05-27 TC 145 ISO 7010:2011 /FDAM 98:2012 Graphical symbols Safety colours and safety signs - Registered safety signs AMENDMENT 98: Safety sign P035: Do not wear metal-studded footwear Data Limite: 2012-05-27 TC 145 ISO 7010:2011 /FDAM 99:2012 Graphical symbols Safety colours and safety signs - Registered safety signs AMENDMENT 99: Safety sign P036: No children allowed Data Limite: 2012-05-27

TC 145 ISO 7010:2011 /FDAM 102:2012 Graphical symbols Safety colours and safety signs - Registered safety signs AMENDMENT 102: Safety sign W032: Warning; Rapid movement of workpiece in press brake Data Limite: 2012-05-27 TC 145 ISO 7010:2011 /FDAM 106:2012 Graphical symbols Safety colours and ed safety signs - Registered safety signs AMENDMENT 106: Safety sign W036: Warning; Fragile roof Data Limite: 2012-05-27 TC 145 ISO 7010:2011 /FDAM 108:2012 Graphical symbols Safety colours and safety signs - Registered safety signs AMENDMENT 108: Safety sign W038: Warning; Sudden loud noise Data Limite: 2012-05-27 TC 145 DIS 9186-1:2012 Graphical symbols Test methods Part 1: Method for testing comprehensibility Data Limite: 2012-08-21 TC 146 FDIS 12219-1:2012 Interior air of road vehicles Part 1: Whole vehicle test chamber - Specification and method for the determination of volatile organic compounds in cabin interiors Data Limite: 2012-06-23 TC 146 FDIS 12219-2:2012 Interior air of road vehicles Part 2: Screening method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials - Bag method Data Limite: 2012-05-26 TC 146 FDIS 12219-3:2012 Interior air of road vehicles Part 3: Screening method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials - Micro-scale chamber method Data Limite: 2012-05-26 TC 146 DIS 12219-4:2012 Interior air of road vehicles Part 4: Screening method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials - Small chamber method Data Limite: 2012-06-30 TC 146 DIS 13137:2012 Workplace atmospheres Pumps for personal sampling of chemical and biological agents Requirements and test methods Data Limite: 2012-09-26 TC 146 FDIS 15202-1:2012 Workplace air Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry Part 1: Sampling Data Limite: 2012-05-16



TC 146 FDIS 16000-19:2012 Indoor air Part 19: Sampling strategy for moulds Data Limite: 2012-05-05 TC 146 FDIS 16000-25:2011 Indoor air Part 25: Determination of the emission of semivolatile organic compounds by building products - Micro-chamber method Data Limite: 2012-05-29 TC 146 FDIS 22262-1:2012 Air quality Bulk materials Part 1: Sampling and qualitative determination of asbestos in commercial bulk materials Data Limite: 2012-06-05 TC 146 DIS 25597:2012 Stationary source emissions Test method for determining PM2,5 and PM10 mass in stack gases using cyclone samplers and sample dilution Data Limite: 2012-09-29 TC 147 FDIS 10870:2012 Water quality Guidelines for the selection of sampling methods and devices for benthic macroinvertebrates in fresh waters Data Limite: 2012-06-19 TC 147 FDIS 11352:2012 Water quality Estimation of measurement uncertainty based on validation and quality control data Data Limite: 2012-05-28 TC 147 DIS 13163-1:2011 Water quality Lead 210 Part 1: Test method using liquid scintillation counting Data Limite: 2012-05-21 TC 147 DIS 13164-1:2011 Water quality Measurement of the activity concentration of radon-222 Part 1: General principles Data Limite: 2012-05-28 TC 147 DIS 13164-2:2011 Water quality Measurement of the activity concentration of radon-222 Part 2: Gamma spectrometry method Data Limite: 2012-05-28 TC 147 DIS 13164-3:2011 Water quality Measurement of the activity concentration of radon-222 Part 3: Emanometric method Data Limite: 2012-05-28 TC 147 DIS 13165-1:2011 Water quality Radium 226 Part 1: Test method using liquid scintillation counting Data Limite: 2012-05-23

TC 147 FDIS 14403-1:2012 Water quality Determination of total cyanide and free cyanide using flow analysis (FIA and CFA) Part 1: Method using flow injection analysis (FIA) Data Limite: 2012-06-12 TC 147 FDIS 14403-2:2012 Water quality Determination of total cyanide and free cyanide using flow analysis (FIA and CFA) Part 2: Method using continuous flow analysis Data Limite: 2012-06-12 TC 147 DIS 16191:2011 Water quality Determination of the toxic effect of sediment and soil on the growth behaviour of Myriophyllum aquaticum Data Limite: 2012-05-08 TC 147 DIS 16303:2011 Water quality Determination of toxicity of fresh water sediments using Hyalella azteca Data Limite: 2012-05-02 TC 147 DIS 16665:2011 Water quality Guidelines for quantitative sampling and sample processing of marine soft-bottom macrofauna Data Limite: 2012-05-08 TC 147 DIS 17378-1:2011 Water quality Determination of arsenic and antimony Part 1: Method using hydride generation atomic fluorescence spectrometry (HG-AFS) Data Limite: 2012-05-26 TC 147 DIS 17378-2:2011 Water quality Determination of arsenic and antimony Part 2: Method using hydride generation atomic absorption spectrometry (HG-AAS) Data Limite: 2012-05-26 TC 147 DIS 17379-1:2011 Water quality Determination of selenium Part 1: Method using hydride generation atomic fluorescence spectrometry (HG-AFS) Data Limite: 2012-05-26 TC 147 DIS 17379-2:2011 Water quality Determination of selenium Part 2: Method using hydride generation atomic absorption spectrometry (HG-AAS) Data Limite: 2012-05-26 TC 147 DIS 23893-3:2011 Water quality Biochemical and physiological measurements on fish Part 3: Determination of vitellogenin Data Limite: 2012-05-08 TC 150 DIS 7206-6:2012 Implants for surgery Partial and total hip joint prostheses Part 6: Endurance properties testing and performance requirements of neck region of stemmed femoral components



Data Limite: 2012-06-08 TC 150 ISO 8637:2010 /DAM 1:2011 Cardiovascular implants and extracorporeal systems Haemodialysers, haemodiafilters, haemofilters and haemoconcentrators AMENDMENT 1: Revision to Figure 2 — Main fitting dimensions of dialysis fluid inlet and outlet ports Data Limite: 2012-05-20 TC 150 FDIS 9714-1:2012 Orthopaedic drilling instruments Part 1: Drill bits, taps and countersink cutters Data Limite: 2012-05-16 TC 150 DIS 13179-1:2012 Implants for surgery Plasma sprayed coatings of unalloyed titanium Part 1: General requirements Data Limite: 2012-09-06 TC 150 DIS 15309:2012 Implants for surgery Differential scanning calorimetry of poly ether ether ketone (PEEK) polymers and compounds for use in implantable medical devices Data Limite: 2012-09-06 TC 150 DIS 16087:2012 Implants for surgery Roentgen stereophotogrammetry for assessment of micromotion of orthopaedic implants Data Limite: 2012-07-03 TC 150 ISO 21536:2007 /DAM 1:2012 Non-active surgical implants Joint replacement implants Specific requirements for knee-joint replacement implants AMENDMENT 1 Data Limite: 2012-08-08 TC 153 DIS 10631:2011 Metallic butterfly valves for general purposes Data Limite: 2012-05-21 TC 153 DIS 28921-1:2012 Industrial valves Isolating valves for low temperatures application Part 1: Design, manufacturing and production testing Data Limite: 2012-05-07 TC 156 FDIS 14802:2012 Corrosion of metals and alloys Guidelines for applying statistics to analysis of corrosion data Data Limite: 2012-06-27 TC 156 DIS 15158:2012 Corrosion of metals and alloys Method of measuring the pitting potential for stainless steels by potentiokinetic control in sodium chloride solution Data Limite: 2012-07-23 TC 156 DIS 16539:2012 Corrosion of metals and alloys Accelerated cyclic corrosion tests with exposure to synthetic ocean water salt-deposition process "Dry" and "wet" conditions at

constant absolute humidity Data Limite: 2012-06-27 TC 156 FDIS 17752:2012 Corrosion of metals and alloys Procedures to determine and estimate runoff rates of metals from materials as a result of atmospheric corrosion Data Limite: 2012-05-28 TC 159 ISO 9241-410:2008 /FDAM 1:2012 Ergonomics of human-system interaction Part 410: Design criteria for physical input devices Amendment 1 Data Limite: 2012-05-22 TC 163 DIS 12655:2011 Energy performance of buildings Presentation of real energy use of buildings Data Limite: 2012-05-22 TC 163 FDIS 18393-1:2012 Thermal insulation products Determination of ageing by settlement Part 1: Blown loose-fill insulation for ventilated attics Data Limite: 2012-06-17 TC 164 FDIS 4965-1:2012 Metallic materials Dynamic force calibration for uniaxial fatigue testing Part 1: Testing systems Data Limite: 2012-06-25 TC 164 FDIS 4965-2:2012 Metallic materials Dynamic force calibration for uniaxial fatigue testing Part 2: Dynamic calibration device (DCD) instrumentation Data Limite: 2012-06-25 TC 164 DIS 12110-1:2012 Metallic materials Fatigue testing - Variable amplitude fatigue testing Part 1: General principles, test method and reporting requirements Data Limite: 2012-08-05 TC 164 DIS 12110-2:2012 Metallic materials Fatigue testing - Variable amplitude fatigue testing Part 2: Cycle counting and related data reduction methods Data Limite: 2012-08-05 TC 164 ISO 12570:2000 /DAM 1:2012 Hygrothermal performance of building materials and products Determination of moisture content by drying at elevated temperature AMENDMENT 1 Data Limite: 2012-08-29 TC 164 DIS 14577-1:2012 Metallic materials Instrumented indentation test for hardness and materials parameters Part 1: Test method Data Limite: 2012-08-29 TC 164 DIS 14577-2:2012 Metallic materials Instrumented indentation test for



hardness and materials parameters Part 2: Verification and calibration of testing machines Data Limite: 2012-08-29 TC 164 DIS 14577-3:2012 Metallic materials Instrumented indentation test for hardness and materials parameters Part 3: Calibration of reference blocks Data Limite: 2012-08-29 TC 165 DIS 16507:2012 Timber structures Uniform, concentrated static and concentrated impact loads on wood-based roof and floor panel assemblies Test methods Data Limite: 2012-08-12 TC 171 FDIS 14289-1:2012 Document management applications - Electronic document file format enhancement for accessibility Part 1: Use of ISO 32000-1 (PDF/UA-1) Data Limite: 2012-06-23 TC 171 DIS 19005-3:2012 Document management - Electronic document file format for long-term preservation Part 3: Use of ISO 32000-1 with support for embedded files (PDF/A-3) Data Limite: 2012-08-09 TC 171 DIS 32000-2:2012 Document management - Portable document format Part 2: PDF 2.0 Data Limite: 2012-08-01 TC 172 FDIS 8578:2012 Microscopes Marking of objectives and eyepieces Data Limite: 2012-05-16 TC 172 DIS 8600-1:2012 Endoscopes Medical endoscopes and endotherapy devices Part 1: General requirements Data Limite: 2012-09-16 TC 172 FDIS 9345-1:2012 Microscopes Imaging distances related to mechanical reference planes Part 1: Tube length 160 mm Data Limite: 2012-05-23 TC 172 ISO 10110-12:2007 /DAM 1:2012 Optics and photonics Preparation of drawings for optical elements and systems Part 12: Aspheric surfaces AMENDMENT 1 Data Limite: 2012-09-10 TC 172 DIS 11553-3:2012 Safety of machinery - Laser processing machines Part 3: Noise reduction and noise measurement methods for laser processing machines and hand-held processing devices and associated auxiliary equipment (accuracy grade 2) Sécurité Data Limite: 2012-06-15 TC 172 FDIS 11987:2012 Ophtalmic optics Contact lenses Determination of

shelf-life Data Limite: 2012-06-26 TC 172 FDIS 23584-2:2012 Optics and photonics Specification of reference dictionary Part 2: Classes’ and properties’ definitions Data Limite: 2012-06-25 TC 173 DIS 7176-25:2012 Wheelchairs Part 25: Batteries and chargers for powered wheelchairs - Requirements and test methods Data Limite: 2012-07-03 TC 173 FDIS 10865-1:2012 Wheelchair containment and occupant retention systems for accessible transport vehicles designed for use by both sitting and standing passengers Part 1: Systems for rearward-facing wheelchairseated passengers Data Limite: 2012-05-20 TC 180 DIS 9806:2012 Solar energy Solar thermal collectors Test methods Data Limite: 2012-09-19 TC 181 ISO 8124-4:2010 /FDAM 1:2012 Safety of toys Part 4:Swings, slides and similar activity toys for indoor and outdoor family domestic use AMENDMENT 1: Inflatable activity toys Data Limite: 2012-05-27 TC 184 FDIS 8000-2:2012 Data quality Part 2: Vocabulary Data Limite: 2012-05-27 TC 184 DIS 9787:2012 Robots and robotic devices Coordinate systems and motion nomenclatures Data Limite: 2012-06-19 TC 184 DIS 16739:2012 Industry Foundation Classes (IFC) for data sharing in the construction and facility management industries Data Limite: 2012-09-02 TC 184 DIS 20140-1:2012 Automation systems and integration Environmental and energy efficiency evaluation method for manufacturing systems Part 1: Overview and general principles Data Limite: 2012-06-17 TC 188 DIS 7840:2012 Small craft Fire-resistant fuel hoses Data Limite: 2012-08-22 TC 188 DIS 8469:2012 Small craft Non-fire-resistant fuel hoses Data Limite: 2012-08-22 TC 188 DIS 10088:2012 Small craft Permanently installed fuel systems Data Limite: 2012-09-12



TC 188 ISO 16147:2002 /DAM 1:2012 Small craft Inboard diesel engines Engine-mounted fuel and electrical components AMENDMENT 1 Data Limite: 2012-08-15 TC 190 FDIS 11504:2012 Soil quality Assessment of impact from soil contaminated with petroleum hydrocarbons Data Limite: 2012-05-07 TC 190 FDIS 12782-1:2012 Soil quality Parameters for geochemical modelling of leaching and specification of constituents in soils and soil materials Part 1: Extraction of amorphous iron oxides and hydroxides with ascorbic acid Data Limite: 2012-05-15 TC 190 FDIS 12782-2:2012 Soil quality Parameters for geochemical modelling of leaching and specification of constituents in soils and materials Part 2: Extraction of crystalline iron oxides and hydroxides with dithionite Data Limite: 2012-05-15 TC 190 FDIS 12782-3:2012 Soil quality Parameters for geochemical modelling of leaching and specification of constituents in soils and materials Part 3: Extraction of aluminium oxides and hydroxides with ammonium oxalate/oxalic acid Data Limite: 2012-05-15 TC 190 FDIS 12782-4:2012 Soil quality Parameters for geochemical modelling of leaching and specification of constituents in soils and materials Part 4: Extraction of humic substances from solid samples Data Limite: 2012-05-15 TC 190 FDIS 12782-5:2012 Soil quality Parameters for geochemical modelling of leaching and specification of constituents in soils and materials Part 5: Extraction of humic substances from aqueous samples Data Limite: 2012-05-15 TC 190 DIS 13859:2012 Soil quality Determination of polycyclic aromatic hydrocarbons (PAH) by gas chromatography (GC) and high performance liquid chromatography (HPLC) Data Limite: 2012-09-17 TC 190 FDIS 15685:2012 Soil quality Determination of potential nitrification and inhibition of nitrification Rapid test by ammonium oxidation Data Limite: 2012-06-18 TC 190 DIS 16387:2012 Soil quality Effects of pollutants on Enchytraeidae (Enchytraeus sp.) Determination of effects on reproduction

Data Limite: 2012-09-26 TC 190 DIS 28258:2012 Soil quality Digital exchange of soil-related data Data Limite: 2012-09-05 TC 190 DIS 29200:2012 Soil quality Assessment of genotoxic effects on higher plants Vicia faba micronucleus test Data Limite: 2012-09-03 TC 193 DIS 13734:2012 Natural gas Organic components used as odorants Requirements and test methods Data Limite: 2012-07-23 TC 193 DIS 14532:2012 Natural gas Vocabulary Data Limite: 2012-09-21 TC 194 FDIS 10993-12:2012 Biological evaluation of medical devices Part 12: Sample preparation and reference materials Data Limite: 2012-06-12 TC 195 ISO 15643:2002 /FDAM 1:2012 Road construction and maintenance equipment Bituminous binder spreaders/sprayers Terminology and commercial specifications AMENDMENT 1 Data Limite: 2012-05-13 TC 195 FDIS 19432:2012 Building construction machinery and equipment Portable, hand-held, internal combustion engine driven cut-off machines Safety requirements Data Limite: 2012-05-22 TC 198 ISO 13408-6:2005 /DAM 1:2012 Aseptic processing of health care products Part 6: Isolator systems AMENDMENT 1 Data Limite: 2012-08-29 TC 199 DIS 13856-3:2012 Safety of machinery Pressure-sensitive protective device Part 3: General principles for the design and testing of pressure-sensitive bumpers, plates, wires and similar devices Data Limite: 2012-08-15 TC 199 DIS 78:2012 Safety of machinery Rules for drafting and presentation of safety standards Data Limite: 2012-07-05 TC 201 DIS 16413:2012 Evaluation of thickness, density and interface width of thin films by X-ray reflectometry Instrumental requirements, alignment and positioning, data collection, data analysis and reporting Data Limite: 2012-06-23



TC 204 DIS 15623:2012 Intelligent Transport Systems Forward vehicle collision warning systems Performance requirements and test procedures Data Limite: 2012-07-23 TC 204 DIS 15638-2:2012 Intelligent transport systems Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) Part 2: Common platform parameters using CALM Data Limite: 2012-08-29 TC 204 DIS 15638-3:2012 Intelligent transport systems Framework for cooperative telematics applications for regulated commercial freight vehicles (TARV) Part 3: Requirements, 'Certification authority' approval procedures, and enforcement provisions for the providers of regulated services Data Limite: 2012-08-16 TC 204 DIS 15638-5:2012 Intelligent transport systems Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) Part 5: Generic vehicle information Data Limite: 2012-08-16 TC 204 DIS 24531:2012 Intelligent transport systems System architecture, taxonomy and terminology Using XML in ITS standards, data registries and data dictionaries Data Limite: 2012-06-24 TC 204 DIS 26683-1:2012 Intelligent Transport Systems Freight land conveyance content identification and communication architecture Part 1: Application profile Data Limite: 2012-06-25 TC 204 DIS 26683-2:2012 Intelligent transport systems Freight land conveyance content identification and communication (FLC-CIC) Part 2: Application interface profiles Data Limite: 2012-06-25 TC 205 DIS 13675:2012 Heating and cooling systems in buildings Method and design for calculation of the system energy performance Combustion systems (boilers) Data Limite: 2012-06-23 TC 205 FDIS 16484-5:2012 Building automation and control systems Part 5: Data communication protocol Data Limite: 2012-05-29 TC 206 DIS 14605:2012 Fine Ceramics (Advanced ceramics, advanced technical ceramics) Light source for testing semiconducting photocatalytic materials used under indoor lighting environment Data Limite: 2012-09-28

TC 206 FDIS 14627:2012 Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for fracture resistance of silicon nitride materials for rolling bearing balls at room temperature by indentation fracture (IF) method Data Limite: 2012-06-27 TC 206 FDIS 14628:2012 Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for rolling contact fatigue of silicon nitride ceramics at room temperature by balls-on-flat method Data Limite: 2012-06-27 TC 206 DIS 14629:2001 Fine ceramics (advanced ceramics, advanced technical ceramics) Determination of flowability of ceramic powders Data Limite: 2012-06-10 TC 206 DIS 18754:2011 Fine ceramics (advanced ceramics, advanced technical ceramics) Determination of density and apparent porosity Data Limite: 2012-05-05 TC 206 FDIS 23145-2:2012 Fine ceramics (advanced ceramics, advanced technical ceramics) Determination of bulk density of ceramic powders Part 2: Untapped density Data Limite: 2012-05-09 TC 207 DIS 14031:2012 Environmental management Environmental performance evaluation Guidelines Data Limite: 2012-06-12 TC 207 DIS 14067:2012 Carbon footprint of products Requirements and guidelines for quantification and communication Data Limite: 2012-06-06 TC 211 DIS 19101-1:2012 Geographic information Reference model Part 1: Fundamentals Data Limite: 2012-08-08 TC 211 DIS 19115-1:2011 Geographic information Metadata Part 1: Fundamentals Data Limite: 2012-05-15 TC 211 FDIS 19144-2:2012 Geographic information Classification systems Part 2: Land Cover Meta Language (LCML) Data Limite: 2012-05-30 TC 213 DIS 2538-1:2012 Geometrical product specifications (GPS) Wedges Part 1: Series of angles and slopes Data Limite: 2012-07-16 TC 213 DIS 2538-2:2012 Geometrical product specifications (GPS) Wedges Part



2: Dimensioning and tolerancing Data Limite: 2012-07-16 TC 213 FDIS 13102:2012 Geometrical product specifications (GPS) Dimensional measuring equipment: Electronic digital-indicator gauge Design and metrological characteristics Data Limite: 2012-06-19 TC 213 ISO 14253-1:1998 /DAM 1:2012 Geometrical Product Specifications (GPS) Inspection by measurement of workpieces and measuring equipment Part 1: Decision rules for proving conformance or non-conformance with specifications AMENDMENT 1 Data Limite: 2012-07-02 TC 213 DIS 16610-1:2012 Geometrical product specifications (GPS) Filtration Part 1: Overview and basic concepts Data Limite: 2012-08-15 TC 213 DIS 16610-20:2012 Geometrical product specifications (GPS) Filtration Part 20: Linear profile filters: Basic concepts Data Limite: 2012-08-15 TC 213 DIS 16610-22:2012 Geometrical product specifications (GPS) Filtration Part 22: Linear profile filters: Spline filters Data Limite: 2012-08-15 TC 213 DIS 16610-29:2012 Geometrical product specifications (GPS) Filtration Part 29: Linear profile filters: Spline wavelets Data Limite: 2012-08-15 TC 213 DIS 16610-40:2012 Geometrical product specifications (GPS) Filtration Part 40: Morphological profile filters: Basic concepts Data Limite: 2012-08-15 TC 213 DIS 16610-41:2012 Geometrical product specifications (GPS) Filtration Part 41: Morphological profile filters: Disk and horizontal line-segment filters Data Limite: 2012-08-15 TC 213 DIS 16610-49:2012 Geometrical product specifications (GPS) Filtration Part 49: Morphological profile filters: Scale space techniques Data Limite: 2012-08-15 TC 213 DIS 16610-71:2012 Geometrical product specifications (GPS) Filtration Part 71: Robust areal filters: Gaussian regression filters Data Limite: 2012-08-29 TC 213 DIS 16610-85:2012 Geometrical product specifications (GPS) Filtration Part 85: Areal morphological: Segmentation Data Limite: 2012-06-29

TC 213 FDIS 25178-3:2012 Geometrical product specifications (GPS) Surface texture: Areal Part 3: Specification operators Data Limite: 2012-06-05 TC 214 DIS 18878:2012 Mobile elevating work platforms Operator (driver) training Data Limite: 2012-09-05 TC 215 DIS 10781:2012 Electronic Health Record-System Functional Model, Release 2.0 (EHR FM) Data Limite: 2012-09-26 TC 215 FDIS 11073-10420:2012 Health informatics Personal health device communication Part 10420: Device specialization - Body composition analyzer Data Limite: 2012-09-19 TC 215 FDIS 11073-10421:2012 Health informatics Personal health device communication Part 10421: Device specialization - Peak expiratory flow monitor (peak flow) Data Limite: 2012-09-19 TC 215 FDIS 11073-10472:2012 Health informatics Personal health device communication Part 10472: Device specialization - Medication monitor Data Limite: 2012-09-19 TC 215 FDIS 11073-30400:2012 Health informatics Point-of-care medical device communication Part 30400: Interface profile - Cabled Ethernet Data Limite: 2012-09-19 TC 216 DIS 16187:2012 Footwear Test methods for uppers, lining and insocks Antibacterial activity Data Limite: 2012-06-19 TC 216 DIS 24294:2012 Timber Round and sawn timber Vocabulary Data Limite: 2012-06-25 TC 219 FDIS 6356:2012 Textile and laminate floor coverings Assessment of static electrical propensity Walking test Data Limite: 2012-06-27 TC 219 DIS 17984:2012 Machine-made textile floor coverings Determination of dimensional changes after exposure to heat and/or water Data Limite: 2012-09-18 TC 223 DIS 22313:2011 Societal security Business continuity management systems Guidance



Data Limite: 2012-05-13 TC 223 DIS 22398:2011 Societal security Guidelines for exercises and testing Data Limite: 2012-05-13 TC 225 FDIS 20252:2012 Market, opinion and social research Vocabulary and service requirements Data Limite: 2012-05-16 TC 227 DIS 16249:2012 Springs Symbols Data Limite: 2012-07-28 TC 234 FDIS 12878:2012 Environmental monitoring of the impacts from marine finfish farms on soft bottom Data Limite: 2012-06-20 TC 239 FDIS 14452:2012 Network services billing Requirements Data Limite: 2012-06-12



9.2 Comités Técnicos da ISO

Lista dos Comités Técnicos da Organização Internacional de Normalização (ISO) em relação aos

quais não existe ONS (Organismo de Normalização Sectorial) ou CT (Comissão Técnica) e cujos processos se encontram disponíveis para consulta no IPQ ISO/TC 4 Rolling bearings

ISO/TC 12 Quantities, units, symbols, conversion factors ISO/TC 14 Shafts for machinery and accessories

ISO/TC 19 Preferred numbers ISO/TC 20 Aircraft and space vehicles

ISO/TC 24 Sieves, sieving and other sizing methods ISO/TC 25 Cast iron and pig iron

ISO/TC 36 Cinematography ISO/TC 37

Terminology (principles and coordination) ISO/TC 41 Pulleys and belts (including veebelts) ISO/TC 42

Photography ISO/TC 47 Chemistry ISO/TC 48

Laboratory glassware and related apparatus ISO/TC 57 Metrology and properties of surfaces ISO/TC 59

Building construction ISO/TC 60 Gears ISO/TC 65

Manganese and chromium ores ISO/TC 67

Materials, equipment and offshore structures for petroleum and natural gas industries ISO/TC 70 Internal combustion engines

ISO/TC 81 Common names for pesticides and other agrochemicals ISO/TC 83 Sports and recreation equipment

ISO/TC 85 Nuclear energy ISO/TC 86 Refrigeration

ISO/TC 100 Chains and chain wheels for power transmission and conveyors

ISO/TC 101 Continuous mechanical handling equipment ISO/TC 102 Iron ores

ISO/TC 110 Industrial trucks ISO/TC 112 Vacuum technology

ISO/TC 113 Hydrometric determinations ISO/TC 114 Horology

ISO/TC 115 Pumps ISO/TC 116 Space heating appliances



ISO/TC 117 Industrial fans ISO/TC 118

Compressors, pneumatic tools and pneumatic machines ISO/TC 119 Powder metallurgy

ISO/TC 120 Leather ISO/TC 123 Plain bearings

ISO/TC 127 Earth-moving machinery ISO/TC 131 Fluid power systems

ISO/TC 132 Ferroalloys ISO/TC 137 Sizing system, designations and marking for

boots and shoes ISO/TC 153 Valves ISO/TC 154

Documents and data elements in administration, commerce and industry ISO/TC 155 Nickel and nickel alloys

ISO/TC 163 Thermal insulation ISO/TC 166 Ceramic ware, glassware and glass ceramic

ware in contact with food ISO/TC 167 Steel and aluminium structures ISO/TC 170

Surgical instruments ISO/TC 173

Technical systems and aids for disabled or handicapped persons ISO/TC 174 Jewellery

ISO/TC 175 Fluorspar ISO/TC 177 Caravans ISO/TC 179

Masonry ISO/TC 182 Geotechnics

ISO/TC 183 Copper, lead and zinc ores and concentrates ISO/TC 184 Industrial automation systems and integration

ISO/TC 185 Safety devices for protection against excessive pressure ISO/TC 190 Soil quality

ISO/TC 191 Humane animal (mammal) traps ISO/TC 192 Gas turbines

ISO/TC 195 Building construction machinery and equipment ISO/TC 197

Hydrogen energy technologies ISO/TC 202 Microbeam analysis

ISO/TC 203 Technical energy systems ISO/TC 204 Transport information and control systems

ISO/TC 205 Building environmental design



ISO/TC 206 Fine ceramics ISO/TC 207 Management environnemental

ISO/TC 208 Thermal turbines for industrial application (steam turbines, gas expansion turbines)



10. Projetos de normas e propostas de estudo de novas normas da Comissão Eletrotécnica Internacional (IEC) Os projetos de normas e propostas de estudo de novas normas estão organizadas por Comités

Técnicos. 10.1 Projetos em inquérito público Para cada referência menciona-se a designação codificada, o título e a data limite para a

apresentação de comentários. SC 17B IEC 60947-4-1:2009 /FDIS A1:2012 Low-voltage switchgear and controlgear Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starter Data Limite: 2012-05-11 SC 17B CDV 60947-5-3:2012 Low-voltage switchgear and controlgear Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDDB) Data Limite: 2012-08-17 SC 17B CDV 60947-7-4:2012 Low-voltage switchgear and controlgear Part 7-4: Ancillary equipment - PCB terminal blocks for copper conductors Data Limite: 2012-08-03 SC 17D CDV 61439-7:2011 Low-voltage switchgear and controlgear assemblies Part 7: Assemblies for specific installations at public sites such as marinas, camping sites, market squares and similar applications and for charging stations for Electrical Vehicles Data Limite: 2012-05-11 SC 17A CDV 62271-4:2012 High voltage switchgear and controlgear Part 4 - Handling procedures for sulphur hexafluoride (SF6) Data Limite: 2012-09-07 SC 17A IEC 62271-102:2001 /CDV A2:2011 High-voltage switchgear and controlgear Part 102: Alternating current disconnectors and earthing switches (Addition of 1100 kV and 1200 kV) Data Limite: 2012-05-25 SC 17A FDIS 62271-107:2012 High-voltage switchgear and controlgear Part 107: Alternating current fused circuit-switchers for rated voltages above 1 kV up to and including 52 kV 32A Data Limite: 2012-05-04 SC 17A CDV 62271-112:2012 High-voltage switchgear and controlgear Part 112: Alternating current high-speed earthing switches for secondary arc extinction on transmission lines Data Limite: 2012-09-07

SC 22F IEC 61954:2011 /CDV A1:2012 Static VAR compensators (SVC) - Testing of thyristor valves Data Limite: 2012-07-20 SC 22H IEC 62040-1:2008 /CDV A1:2011 Uninterruptible power systems (UPS) Part 1: General and safety requirements for UPS Data Limite: 2012-05-25 SC 22H CDV 62040-4:2012 Uninterruptible power systems (UPS) Part 4: Environmental aspects - requirements and reporting Data Limite: 2012-09-14 SC 23H IEC 60309-1:1999 /FDIS A2:2012 Plugs, socket-outlets and couplers for industrial purposes Part 1: General requirements Data Limite: 2012-05-11 SC 23B IEC 60884-2-7:2011 /CDV A1:2011 Plugs and socket-outlets for household and similar purposes Part 2-7: Particular requirements for cord extension sets Data Limite: 2012-05-11 SC 23A CDV 61534-21:2012 Powertrack systems Part 21: Particular requirements for powertrack systems intended for wall and ceiling mounting Data Limite: 2012-06-15 SC 23E CDV 62606:2012 General requirements for Arc Fault Detection Devices Data Limite: 2012-07-06 SC 32C IEC 60127-4:2005 /CDV A2:2012 Miniature fuses Part 4: Universal modular fuse-links (UMF) - Through-hole and surface mount types Data Limite: 2012-07-13 SC 32C CDV 60127-7:2012 Miniature fuses Part 7: Miniature fuse-links for special applications Data Limite: 2012-09-07 SC 32B CDV 60269-2:2012 Low-voltage fuses Part 2: Supplementary requirements for



fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to K Data Limite: 2012-09-07 SC 32B IEC 60269-3:2010 /CDV A1:2012 Low-voltage fuses Part 3 - Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household or similar application) - Examples of standardized systems of fuses A to F Data Limite: 2012-09-07 SC 34B IEC 60061-1:1969 /CDV A49:2011 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 1: Lamp caps Data Limite: 2012-05-25 SC 34B IEC 60061-2:1969 /CDV A46:2011 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 2: Lampholders Data Limite: 2012-05-25 SC 34B IEC 60061-3:1969 /CDV A47:2011 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 3: Gauges Data Limite: 2012-05-25 SC 34A FDIS 60432-3:2012 Incandescent lamps - Safety specifications Part 3: Tungsten-halogen lamps (non-vehicle) Data Limite: 2012-06-08 SC 34D CDV 60598-2-8:2012 Luminaires Part 2-8: Particular requirements - Handlamps Data Limite: 2012-08-10 SC 34D CDV 60598-2-11:2011 Luminaires Part 2-11: Particular requirements - Aquarium luminaires Data Limite: 2012-05-11 SC 34D CDV 60598-2-12:2012 Luminaires Part 2-12: Particular requirements - Mains socket-outlet mounted nightlights Data Limite: 2012-06-08 SC 34A IEC 60809:1995 /FDIS A5:2012 Lamps for road vehicles - Dimensional, electrical and luminous requirements Data Limite: 2012-07-06 SC 34A IEC 60968:1988 /CDV A3:2011 Self-ballasted lamps for general lighting services - Safety requirements Data Limite: 2012-05-18 SC 34A IEC 61195:1999 /CDV A1:2011 Double-capped fluorescent lamps - Safety specifications Data Limite: 2012-05-18

SC 34A IEC 61199:2011 /CDV A1:2011 Single-capped fluorescent lamps - Safety specifications Data Limite: 2012-05-18 SC 34A IEC 61231:2010 /CDV A1:2012 International lamp coding system (ILCOS) Data Limite: 2012-08-03 SC 34C IEC 61347-2-1:2000 /CDV A2:2011 Lamp controlgear Part 2-1: Particular requirements for starting devices (other than glow starters) Data Limite: 2012-05-25 SC 34A IEC 61549:2003 /FDIS A3:2012 Miscellaneous lamps Data Limite: 2012-06-08 SC 37A IEC 61643-21:2000 /FDIS A2:2012 Low voltage surge protective devices Part 21: Surge protective devices connected to telecommunications and signalling networks - Performance requirements and testing methods Data Limite: 2012-06-08 SC 47D CDV 60191-2:2011 Proposed new package outline - flange mount package with flat leads, P-SFM-F8 - To be published as outline 187E, if approved Data Limite: 2012-05-04 SC 47D CDV 60191-2:2011 Proposed new package outline - flange mounted package with through hole leads, P-SFM-T3 - To be published as outline 186F, if approved Data Limite: 2012-05-04 SC 47D CDV 60191-2:2011 Proposed new package outline - large power package with 4 load terminals, P-UMP-A4. To be published as outline 184B, if approved Data Limite: 2012-05-04 SC 47D CDV 60191-2:2011 Proposed new package outline - large power package with 4 load terminals, P-UMP-A4. To be published as outline 184B, if approved Data Limite: 2012-05-04 SC 47D CDV 60191-2:2011 Proposed new package outline - large power package with 6 load terminals, P-UMP-A6. To be published as outline 185B, if approved Data Limite: 2012-05-04 SC 47D CDV 60191-2:2011 Proposed new package outline - large power package with 6 load terminals, P-UMP-A6. To be published as outline 185B, if approved Data Limite: 2012-05-04 SC 47F CDV 62047-11:2011 Semiconductor devices - Micro-electromechanical



devices Part 11: Test method for Linear Thermal Expansion Coefficients of Freestanding MEMS materials Data Limite: 2012-05-25 SC 47F CDV 62047-17:2012 Semiconductor devices - Micro-electromechanical devices Part 17: Bulge test method for measuring mechanical properties of thin films Data Limite: 2012-06-08 SC 47F CDV 62047-18:2012 Semiconductor devices - Micro-electromechanical devices Part 18: Bend testing methods of thin film materials Data Limite: 2012-08-03 SC 47F CDV 62047-19:2012 Semiconductor devices - Micro-electromechanical devices Part 19: Electronic compasses Data Limite: 2012-06-29 SC 47A FDIS 62132-8:2012 Integrated circuits - Measurement of electromagnetic immunity Part 8: Measurement of radiated immunity - IC Stripline method Data Limite: 2012-06-15 SC 47A CDV 62215-3:2012 Integrated circuits - Measurement of impulse immunity Part 3: Non-synchronous transient injection method Data Limite: 2012-08-03 SC 48B IEC 60352-2:2006 /CDV A1:2012 Solderless connections Part 2: Crimped connections - General requirements, test methods and practical guidance Data Limite: 2012-10-05 SC 48B FDIS 60512-99-001:2012 Connectors for electronic equipment - Tests and measurements Part 99-001: Test schedule for engaging and separating connectors under electrical load - Test 99a: Connectors used in twisted pair communication cabling with remote power Data Limite: 2012-05-18 SC 48D FDIS 60917-2-5:2012 Modular order for the development of mechanical structures for electronic equipment practices Part 2-5: Sectional specification - Interface coordination dimensions for the 25 mm equipment practice - Cabinet interface dimensions for miscellaneous equipment Data Limite: 2012-05-04 SC 48D CDV 61587-3:2012 Mechanical structures for electronic equipment -Tests for IEC 60917 and IEC 60297 Part 3: Electromagnetic shielding performance tests for cabinets and subracks Data Limite: 2012-09-07 SC 48D FDIS 61587-4:2012 Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 Part 4: Combination of performance levels for modular cabinets Data Limite: 2012-06-08

SC 59D FDIS 60734:2012 Household electrical appliances - Performance - Water for testing Data Limite: 2012-05-18 SC 61D CDV 60335-2-40:2012 Household and similar electrial appliances - Safety Part 2-40: Particular Requirements for electrical heat pumps, air-conditioners and dehumidifiers Data Limite: 2012-06-15 SC 61H IEC 60335-2-70:2002 /CDV A2:2012 Household and similar electrical appliances - Safety Part 2-70: Particular requirements for milking machines Data Limite: 2012-06-22 SC 61H IEC 60335-2-71:2002 /CDV A2:2012 Household and similar electrical appliances - Safety Part 2-71: Particular requirements for electrical heating appliances for breeding and rearing animals Data Limite: 2012-06-22 SC 61H IEC 60335-2-76:2002 /CDV A2:2012 Household and similar electrical appliances - Safety Part 2-76: Particular requirements for electric fence energizers Data Limite: 2012-06-22 SC 61H IEC 60335-2-86:2002 /CDV A2:2012 Household and similar electrical appliances - Safety Part 2-86: Particular requirements for electric fishing machines Data Limite: 2012-06-22 SC 61H IEC 60335-2-87:2002 /CDV A2:2012 Household and similar electrical appliances - Safety Part 2-87: Particular requirements for electrical animal-stunning equipment Data Limite: 2012-06-22 SC 61B CDV 60335-2-110:2012 Household and similar appliances - Safety Part 2-110: Particular requirements for commercial microwave appliances with insertion or contacting applicators Data Limite: 2012-07-27 SC 62A IEC 60601-1:2005 /FDIS A1:2012 Medical electrical equipment Part 1: General requirements for basic safety and essential performance Data Limite: 2012-06-29 SC 62A CDV 60601-1-2:2012 Medical electrical equipment Part 1-2: General requirements for basic safety and essential performance - Collateral standard: Electromagnetic disturbances - Requirements and tests Data Limite: 2012-08-17 SC 62A CDV 60601-1-12:2012 Medical electrical equipment Part 1-12: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems



intended for use in the emergency medical services environment Data Limite: 2012-06-15 SC 62D FDIS 60601-2-10:2012 Medical electrical equipment Part 2-10: Particular requirements for the basic safety and essential performance of nerve and muscle stimulators Data Limite: 2012-06-08 SC 62D FDIS 60601-2-26:2012 Medical electrical equipment Part 2-26: Particular requirements for the basic safety and essential performance of electroencephalographs Data Limite: 2012-05-11 SC 62D CDV 60601-2-62:2011 Medical electrical equipment Part 2-62: Particular requirements for basic safety and essential performance of high intensity therapeutic ultrasound (HITU) systems Data Limite: 2012-05-25 SC 62B CDV 61331-1:2012 Protective devices against diagnostic medical X-Radiation Part 1: Determination of attenuation properties of materials (Proposed Horizontal Standards) Data Limite: 2012-09-21 SC 62B CDV 61331-2:2012 Protective devices against diagnostic medical X-Radiation Part 2: Translucent protective plates (Proposed Horizontal Standards) Data Limite: 2012-09-21 SC 62B CDV 61331-3:2012 Protective devices against diagnostics medical X-Radiation Part 3: Protective clothing, eyewear and protective patient shields (Proposed Horizontal Standards) Data Limite: 2012-09-21 SC 62D IEC 80601-2-30:2009 /CDV A1:2012 Medical electrical equipment Part 2-30: Particular requirements for the basic safety and essential performance of automated type non-invasive sphygmomanometers Data Limite: 2012-06-29 SC 62D CDV 81060-2:2011 Non-invasive sphygmomanometers - Clinical validation of automated measurement type Data Limite: 2012-05-04 SC 62D CDV 80601-2-67:2012 Medical electrical equipment Part 2-67:Particular requirements for basic safety and essential performance of oxygen-conserving equipment Data Limite: 2012-06-29 SC 65B CDV 60770-3:2012 Transmitters for using in industrial-process control systems Part 3: Methods for performance evaluation of intelligent transmitters Data Limite: 2012-09-07

SC 65B CDV 61131-9:2011 Programmable controllers Part 9: Single-drop digital communication interface for small sensors and actuators (SDCI) Data Limite: 2012-05-11 SC 65A FDIS 61326-1:2012 Electrical equipment for measurement, control and laboratory use - EMC requirements Part 1: General requirements Data Limite: 2012-06-08 SC 65A FDIS 61326-2-3:2012 Electrical equipment for measurement, control and laboratory use - EMC requirements Part 2-3: Particular requirements - Test configurations, operational conditions and performance criteria for transducers with integrated or remote signal conditioning Data Limite: 2012-06-08 SC 65A FDIS 61326-2-4:2012 Electrical equipment for measurement, control and laboratory use - EMC requirements Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9 Data Limite: 2012-06-08 SC 65A FDIS 61326-2-6:2012 Electrical equipment for measurement, control and laboratory use - EMC requirements Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment Data Limite: 2012-06-08 SC 65C CDV 61784-5-X:2011 Industrial communication networks - Profiles Part 5-X: Installation of fieldbuses - Installation profiles for CPF X Data Limite: 2012-05-18 SC 65C CDV 61918:2011 Industrial communication networks - Installation of communication networks in industrial premises Data Limite: 2012-05-18 SC 65E CDV 62264-1:2012 Enterprise system integration Part 1: Models and terminology Data Limite: 2012-07-13 SC 65A CDV 62264-2:2012 Enterprise system integration Part 2: Object models and attributes Data Limite: 2012-07-13 SC 65C FDIS 62439-3:2012 Industrial communication networks - High availability automation networks Part 3: Parallel Redundancy Protocol (PRP) and High-availability Seamless Redundancy (HSR) Data Limite: 2012-05-18



SC 65B CDV 62703:2012 Expression of performance of fluorometric oxygen analyzers in liquid media Data Limite: 2012-08-03 SC 77A CDV 61000-3-3:2012 Electromagnetic compatibility (EMC) Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection Data Limite: 2012-07-20 SC 86A CDV 60794-1-24:2012 Optical fibre cables Part 1-24: Generic specification -Basic optical cable test procedures - Electrical test methods Data Limite: 2012-09-14 SC 86C FDIS 61250-3:2012 Fibre optic active components and devices - Test and measurement procedures Part 3: Optical power variation induced by mechanical disturbance in optical receptacles and transceiver interfaces Data Limite: 2012-06-01 SC 86C CDV 61280-1-1:2012 Fibre optic communication subsystem basic test procedures Part 1-1: Test procedures for general communication subsystems - Transmitter output optical power measurement for single-mode optical fibre cable Data Limite: 2012-09-14 SC 86B CDV 61300-2-28:2012 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 2-28: Tests - Industrial atmosphere (sulphur dioxide) Data Limite: 2012-07-06 SC 86B CDV 61300-3-29:2012 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 3-29: Examinations and measurements - Spectral transfer characteristics of DWDM devices Data Limite: 2012-06-29 SC 86B FDIS 61300-3-38:2012 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 3-38: Examinations and measurements - Group delay, chromatic dispersion and phase ripple Data Limite: 2012-05-04 SC 86B FDIS 61300-3-44:2012 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 3-44: Examinations and measurements - Fibre optic trancsceiver receptacle endface visual and automated inspection Data Limite: 2012-06-22 SC 86B CDV 61300-3-49:2012 Fibre optic interconnecting devices and passive

components - Basic test and measurement procedures Part 3-49: Measurement: Guide pin retention force for rectangular ferrule multi-fibre connectors Data Limite: 2012-08-10 SC 86B CDV 61754-4:2012 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces Part 4: Type SC connector family Data Limite: 2012-06-29 SC 86B CDV 61754-6:2012 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces Part 6: Type MU connector family Data Limite: 2012-06-29 SC 86B FDIS 61754-26:2012 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces Part 26: Type SF connector family Data Limite: 2012-06-22 SC 86C FDIS 62150-3:2012 Fibre optic active components and devices - Basic test and measurement procedures Part 3: Optical power variation induced by mechanical disturbance in optical receptacles and transceiver interfaces Data Limite: 2012-06-01 SC 86C CDV 62343:2012 Dynamic modules and devices - General and guidance Data Limite: 2012-07-13 SC CISPR/A CISPR 16-1-2:2003 /CDV A3:2012 Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-2: Radio disturbance and immunity measuring apparatus - Coupling devices for conducted disturbance measurements Data Limite: 2012-09-14 SC CISPR/A CISPR 16-1-2:2003 /CDV A3:2012 Specification for radio disturbance and immunity measuring apparatus and methods Part 1-2: Radio disturbance and immunity measuring apparatus - Coupling devices for conducted disturbance measurements Data Limite: 2012-09-28 SC CISPR/A CISPR 16-1-4:2010 /FDIS A1:2012 Introduction of reference site method (RSM Data Limite: 2012-05-18 SC CISPR/A CISPR 16-1-5:2003 /FDIS A1:2012 Related to the introduction of Reference Site Method (RSM) Data Limite: 2012-05-18 SC CISPR/A CISPR 16-2-1:2008 /CDV A3:2012 Specification for radio disturbance and immunity measuring apparatus and methods Part 2-1: Methods of measurement of disturbances and immunity - Conducteddisturbance measurements



Data Limite: 2012-09-28 SC CISPR/A CISPR 16-2-3:2010 /CDV A2:2011 Revision of CISPR 16-2-3 on the application of CMADs Data Limite: 2012-05-25 TC 2 FDIS 60034-18-31:2012 Rotating electrical machines Part 18-31: Functional evaluation of insulation systems - Test procedures for form-wound windings - Thermal evaluation and classification of insulation systems used in rotating machines Data Limite: 2012-06-01 TC 2 FDIS 60034-18-34:2012 Rotating electrical machines Part 18-34: Functional evaluation of insulation systems - Test procedures for form-wound windings - Evaluation of thermomechanical endurance of insulation systems Data Limite: 2012-05-04 TC 3 CDV 60617:2012 Extended procedure for change request C00199; symbol S01863 Wireless connection Data Limite: 2012-08-17 TC 3 CDV 60617:2012 Extended procedure for change request C00200; symbol S01864 Stand alone emergency switch equipment Data Limite: 2012-08-17 TC 3 CDV 60617:2012 Extended procedure for change request C00203; symbol S01867 Double two-way single pole switch Data Limite: 2012-08-17 TC 3 CDV 60617:2012 Extended procedure for change request C00205; symbol S01869 Two-way single pole switch with dimmer Data Limite: 2012-08-17 TC 3 CDV 60617:2012 Extended procedure for change request C00204; symbol S01868 Two-way single pole and single pole switch Data Limite: 2012-08-17 TC 3 CDV 60617:2012 Extended procedure for change request C00201; symbol S01865 Foot switch single pole Data Limite: 2012-08-17 TC 3 CDV 60848:2011 GRAFCET specification language for sequential function charts Data Limite: 2012-05-25 TC 4 CDV 62270:2012 Guide for Computer-Based Control for Hydroelectric Power Plant Automation Data Limite: 2012-07-06

TC 9 CDV 61375-2-5:2012 Electronic railway equipment - Train backbone Part 2-5: Ethernet Train Backbone Data Limite: 2012-06-29 TC 9 FDIS 61881-2:2012 Railway applications - Rolling stock equipment - Capacitors for power electronics Part 2: Aluminium electrolytic capacitors with non solid electrolyte Data Limite: 2012-07-06 TC 9 FDIS 61881-3:2012 Railway applications - Rolling stock equipment - Capacitors for power electronics Part 3: Electric double-layer capacitors Data Limite: 2012-07-06 TC 9 CDV 62128-1:2012 Railway applications - Fixed installations - Electrical safety, earthing and the return circuit Part 1: Protective provisions against electric shock Data Limite: 2012-08-03 TC 9 CDV 62128-2:2012 Railway applications - Fixed installations - Electrical safety, earthing and the return circuit Part 2: Provisions against the effects of stray currents caused by d.c. traction systems Data Limite: 2012-08-03 TC 9 CDV 62128-3:2012 Railway applications - Fixed installations - Electrical safety, earthing and the return circuit Part 3: Mutual interaction of a.c. and d.c. traction systems Data Limite: 2012-08-03 TC 9 IEC 62497-1:2010 /CDV A1:2012 Railway applications - Insulation coordination Part 1: Basic requirements - Clearances and creepage distances for all electrical and electronic equipment Data Limite: 2012-08-03 TC 9 CDV 62625-1:2012 Electronic railway equipment - On board driving data recording system Part 1: System specification Data Limite: 2012-08-03 TC 14 CDV 60076-3:2012 Power transformers Part 3: Insulation levels, dielectric tests and external clearances in air Data Limite: 2012-08-10 TC 14 CDV 60076-14:2012 Power Transformers Part 14: Design and application of liquid-immersed power transformers using high-temperature insulation materials Data Limite: 2012-09-21 TC 14 FDIS 60076-18:2012 Power transformers Part 18: Measurement of frequency response Data Limite: 2012-06-22



TC 15 CDV 60684-3-214:2012 Flexible insulating sleeving Part 3: Specifications for individual types of sleeving - Sheet 214:Heat-shrinkable, polyolefin sleeving, not flame retarded, thick and medium wall Data Limite: 2012-09-07 TC 15 CDV 62677-1:2012 Heat shrinkable low and medium voltage moulded shapes Part 1: General requirements Data Limite: 2012-09-07 TC 20 FDIS 60287-3-2:2012 Electric cables - Calculation of the current rating Part 3-2: Sections on operating conditions - Economic optimization of power cable size Data Limite: 2012-05-25 TC 20 IEC 60502-2:2005 /CDV A1:2012 Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) Part 2: Cables for rated voltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV) Data Limite: 2012-07-06 TC 20 IEC 61034-1:2005 /CDV A1:2012 Measurement of smoke density of cables burning under defined conditions Part 1: Test apparatus Data Limite: 2012-07-06 TC 20 IEC 61034-2:2005 /CDV A1:2012 Measurement of smoke density of cables burning under defined conditions Part 2: Test procedure and requirements Data Limite: 2012-07-06 TC 21 CDV 60952-1:2011 Aircraft batteries Part 1: General test requirements and performance levels Data Limite: 2012-05-04 TC 21 CDV 60952-2:2011 Aircraft batteries Part 2: Design and construction requirements Data Limite: 2012-05-04 TC 21 CDV 60952-3:2011 Aircraft batteries Part 3: Product specification and declaration of design and performance (DDP) Data Limite: 2012-05-04 TC 21 CDV 61427-1:2012 Secondary cells and batteries for Renewable Energy Storage - General Requirements and methods of test Part 1: Photovoltaic Off grid application Data Limite: 2012-07-27 TC 22 FDIS 62477-1:2012 Safety requirements for power electronic converter systems and equipment Part 1: General Data Limite: 2012-06-01

TC 26 FDIS 62217:2012 Polymeric hv insulators for indoor and outdoor use - general definitions, test methods and acceptance criteria Data Limite: 2012-07-06 TC 27 CDV 60519-10:2012 Safety in electroheating installations Part 10: Particular requirements for electrical resistance trace heating systems for industrial and commercial applications Data Limite: 2012-07-13 TC 27 CDV 60519-12:2012 Safety in electroheating installations Part 12: Particular requirements for infrared electroheating installations Data Limite: 2012-07-27 TC 31 CDV 60079-31:2012 Explosive atmospheres Part 31: Equipment dust ignition protection by enclosure "t" Data Limite: 2012-08-17 TC 33 FDIS 60358-1:2012 Coupling capacitors and capacitor dividers Part 1: Common clauses Data Limite: 2012-05-11 TC 33 CDV 60358-2:2012 Coupling capacitors and capacitor dividers Part 2: AC or DC single-phase coupling capacitor connected between line and ground for power line carrier-frequency (PLC) application Data Limite: 2012-07-06 TC 33 CDV 60831-1:2012 Shunt power capacitors of the self-healing type for A.C. systems having a rated voltage up to and including 1000 V Part 1: General - Performance, testing and rating- Safety requirements- Guide for installation and operation Data Limite: 2012-07-06 TC 33 CDV 60831-2:2012 Shunt power capacitors of the self-healing type for A.C. systems having a rated voltage up to and including 1000 V Part 2: Ageing test, self-helaing test and destruction test Data Limite: 2012-06-29 TC 33 CDV 62146-1:2012 Grading capacitors for high-voltage alternating current circuit-breakers Data Limite: 2012-07-06 TC 35 CDV 62281:2011 Safety of primary and secondary lithium cells and batteries during transport Data Limite: 2012-05-11 TC 38 CDV 61869-4:2012 Instrument Transformers Part 4: Combined Transformers Data Limite: 2012-09-14 TC 40 CDV 60286-4:2012 Packaging of components for automatic handling Part 4:



Stick magazines for electronic components encapsulated in packages of different forms Data Limite: 2012-09-07 TC 40 FDIS 60294:2012 Measurement of the dimensions of a cylindrical component with axial terminations Data Limite: 2012-06-29 TC 40 FDIS 60301:2012 Preferred diameters of wire terminations of capacitors and resistors Data Limite: 2012-06-29 TC 40 FDIS 60440:2012 Method of measurement of non-linearity in resistors Data Limite: 2012-06-29 TC 44 CDV 60204-31:2011 Safety of machinery - Electrical equipment of machines Part 31: Particular safety and EMC requirements for sewing machines, units and systems Data Limite: 2012-05-25 TC 44 IEC 62061:2005 /CDV A1:2011 Safety of machinery - Functional safety of safety-related electrical, Electronic and programmable electronic control systems Data Limite: 2012-05-04 TC 46 FDIS 62037-2:2012 Passive r.f. and microwave devices, Intermodulation level measurement Part 2: Measurement of passive intermodulation in coaxial assemblies Data Limite: 2012-05-18 TC 46 FDIS 62037-5:2012 Passive r.f. and microwave devices, Intermodulation level measurement Part 2:Measurement of passive intermodulation in filters Data Limite: 2012-05-18 TC 46 FDIS 62037-6:2012 Passive r.f. and microwave devices, Intermodulation level measurement Part 6: Measurement of passive intermodulation in antennas Data Limite: 2012-05-18 TC 47 CDV 62483:2012 Environmental acceptance requirements for tin whisker susceptibility of tin and tin alloy surface finishes Data Limite: 2012-09-07 TC 49 FDIS 62575-2:2012 Radio frequency (RF) bulk acoustic wave (BAW) filters of assessed quality Part 2: Guidelines for the use Data Limite: 2012-07-06 TC 55 CDV 60317-0-1:2012 Specifications for particular types of winding wires Part 0-1: General requirements - Enamelled round copper wire Data Limite: 2012-08-10

TC 55 IEC 60317-0-3:2008 /CDV A1:2012 Specifications for particular types of winding wires Part 0-3: General requirements - Enamelled round aluminum wire Data Limite: 2012-08-10 TC 55 FDIS 60317-0-8:2012 Specifications for particular types of winding wires Part 0-8: General requirements - Polyester glass fibre wound, resin or varnish impregnated or not impregnated, bare or enamelled rectangular copper wire Data Limite: 2012-06-08 TC 55 FDIS 60317-2:2012 Specifications for particular types of winding wires Part 2: Solderable polyurethane enamelled round copper wire, class 130, with a bonding layer Data Limite: 2012-06-08 TC 55 CDV 60317-20:2012 Specifications for particular types of winding wires Part 20: Solderable polyurethane enamelled round copper wire, class 155 Data Limite: 2012-07-20 TC 55 CDV 60317-21:2012 Specifications for particular types of winding wires Part 21: Solderable polyurethane enamelled round copper wire overcoated with polyamide, class 155 Data Limite: 2012-07-20 TC 55 CDV 60317-23:2012 Specifications for particular types of winding wires Part 23: Solderable polyesterimide enamelled round copper wire, class 180 Data Limite: 2012-07-20 TC 55 CDV 60317-35:2012 Specifications for particular types of winding wires Part 35: Solderable polyurethane enamelled round copper wire, class 155, with a bonding layer Data Limite: 2012-07-20 TC 55 CDV 60317-36:2011 Specifications for particular types of winding wires Part 36: Solderable polyesterimide enamelled round copper wire, class 180, with a bonding layer Data Limite: 2012-07-20 TC 55 CDV 60317-37:2012 Specifications for particular types of winding wires Part 37: Polyesterimide enamelled round copper wire, class 180, with a bonding layer Data Limite: 2012-07-20 TC 55 CDV 60317-38:2012 Specifications for particular types of winding wires Part 38: Polyester or polyesterimide overcoated with polyamide-imide, enamelled round copper wire, class 200, with a bonding layer Data Limite: 2012-07-20



TC 55 CDV 60317-46:2012 Specifications for particular types of winding wires Part 46: Aromatic polyimide enamelled round copper wires, class 240 Data Limite: 2012-08-17 TC 55 CDV 60317-47:2012 Specifications for particular types of winding wires Part 47: Aromatic polyimide enamelled rectangular copper wire, class 240 Data Limite: 2012-08-17 TC 55 FDIS 60317-48:2012 Specifications for particular types of winding wires Part 48: Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 155 Data Limite: 2012-06-22 TC 55 FDIS 60317-49:2012 Specifications for particular types of winding wires Part 49: Glass-fibre wound high temperature resin or varnish impregnated, bare or enamelled round copper wire, temperature index 180 Data Limite: 2012-06-22 TC 55 FDIS 60317-50:2012 Specifications for particular types of winding wires Part 50: Glass-fibre wound silicone resin or varnish impregnated, bare or enamelled round copper wire, temperature index 200 Data Limite: 2012-06-22 TC 55 CDV 60317-55:2012 Specifications for particular types of winding wires Part 55: Solderable polyurethane enamelled round copper wire overcoated with polyamide, Class 180 Data Limite: 2012-08-17 TC 55 FDIS 60317-60:2012 Specifications for particular types of winding wires Part 60: Polyester glass fibre wound minimum class 155 resin or varnish impregnated or not impregnated, bare or enamelled, rectangular copper wire, temperature index 155 Data Limite: 2012-06-01 TC 55 FDIS 60317-61:2012 Specifications for particular types of winding wires Part 61: Polyester glass fibre wound, minimum class 180, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180 Data Limite: 2012-06-08 TC 55 FDIS 60317-62:2012 Specifications for particular types of winding wires Part 62: Polyester glass fibre wound, minimum class 200 resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 200 Data Limite: 2012-06-08 TC 55 IEC 60851-3:2009 /CDV A1:2012 Winding wires - Test methods Part 3: Mechanical properties

Data Limite: 2012-08-10 TC 56 CDV 62673:2012 Methodology for communication network dependability assessment and assurance Data Limite: 2012-09-07 TC 57 CDV 61968-9:2012 Application integration at electric utilities - System interfaces for distribution management Part 9: Interfaces for meter reading and control Data Limite: 2012-10-05 TC 57 CDV 61968-100:2012 Application integration at electric utilities - System interfaces for distribution management Part 100: Implementation profiles Data Limite: 2012-10-05 TC 57 CDV 61970-301:2011 Energy Management System Application Program Interface (EMS-API) Part 301: Common Information Model (CIM) Base Data Limite: 2012-05-04 TC 57 CDV 62325-301:2012 Framework for energy market communications Part 301: Common Information Model (CIM) extensions for markets Data Limite: 2012-09-21 TC 61 IEC 60335-1:2010 /CDV A1:2011 Household and similar electrical appliances - Safety Part 1: General requirements Data Limite: 2012-05-04 TC 61 IEC 60335-1:2010 /CDV A1:2011 Household and similar electrical appliances - Safety Part 1: General requirements Data Limite: 2012-05-04 TC 61 IEC 60335-2-2:2009 /CDV A1:2011 Household and similar electrical appliances - Safety Part 2-: Particular requirements for vacuum cleaners and water-suction cleaning appliances Data Limite: 2012-05-04 TC 61 IEC 60335-2-4:2008 /CDV A1:2011 Household and similar electrical appliances - Safety Part 2-4: Particular requirements for spin extractors Data Limite: 2012-05-04 TC 61 CDV 60335-2-5:2011 Household and similar electrical appliances - Safety Part 2-5: Particular requirements for dish washers Data Limite: 2012-05-04 TC 61 CDV 60335-2-8:2011 Household and similar electrical appliances - Safety Part 2-8: Particular requirements for shavers, hair clippers and similar appliances Data Limite: 2012-05-04



TC 61 IEC 60335-2-9:2008 /CDV A1:2011 Household and similar electrical appliances - Safety Part 2-9: Particular requirements for grills, toasters and similar portable cooking appliances Data Limite: 2012-05-04 TC 61 IEC 60335-2-11:2008 /CDV A1:2011 Household and similar electrical appliances - Safety Part 2-11: Particular requirements for tumble dryers Data Limite: 2012-05-04 TC 61 IEC 60335-2-14:2006 /CDV A2:2011 Household and similar electrical appliances - Safety Part 2-14: Particular requirements for kitchen machines Data Limite: 2012-05-04 TC 61 CDV 60335-2-15:2011 Household and similar electrical appliances - Safety Part 2-15: Particular requirements for appliances for heating liquids Data Limite: 2012-05-11 TC 61 CDV 60335-2-21:2011 Household and similar electrical appliances - Safety Part 2-21: Particular requirements for storage water heaters Data Limite: 2012-05-11 TC 61 IEC 60335-2-27:2009 /CDV A1:2011 Household and similar electrical appliances - Safety Part 2-27: Particular requirements for skin exposure to ultraviolet and infrared radiation Data Limite: 2012-05-04 TC 61 IEC 60335-2-30:2009 /CDV A1:2011 Household and similar electrical appliances - Safety Part 2-30: Particular requirements for room heaters Data Limite: 2012-05-04 TC 61 CDV 60335-2-31:2011 Household and similar electrical appliances - Safety Part 2-31: Particular requirements for range hoods and other cooking fume extractors Data Limite: 2012-05-11 TC 61 CDV 60335-2-35:2011 Household and similar electrical appliances - Safety Part 2-35: Particular requirements for instantaneous water heaters Data Limite: 2012-05-04 TC 61 CDV 60335-2-41:2011 Household and similar electrical appliances - Safety Part 2-41: Particular requirements for pumps Data Limite: 2012-05-04 TC 61 CDV 60335-2-75:2011 Household and similar electrical appliances - Safety Part 2-75: Particular requirements for commercial dispensing appliances and vending machines Data Limite: 2012-05-11

TC 61 IEC 60335-2-102:2004 /CDV A2:2011 Household and similar electrical appliances - Safety Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections Data Limite: 2012-05-04 TC 64 CDV 60364-7-713:2012 Low-voltage electrical installations Part 7-713: Requirements for special installations or locationsFurniture Data Limite: 2012-06-22 TC 66 FDIS 61010-2-091:2012 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-091: Particular requirements for cabinet x-ray systems Data Limite: 2012-05-18 TC 68 CDV 60404-8-4:2012 Magnetic materials Part 8-4: Specifications for individual materials - Cold-rolled non-oriented electrical steel strip and sheet delivered in the fully-processed state Data Limite: 2012-09-07 TC 78 FDIS 60900:2012 Live working - Hand tools for use up to 1 000 V a.c. and 1 500 V d.c. Data Limite: 2012-05-18 TC 78 CDV 61472:2011 Live working - Minimum approach distances for ac systems in the voltage range 72,5 kv to 800 kv - A method of calculation Data Limite: 2012-05-11 TC 79 CDV 60839-11-1:2011 Alarm systems Part 11-1: Electronic access control systems - System and components requirements Data Limite: 2012-05-25 TC 79 CDV 62676-3:2012 Alarm systems - Alarm and electronic security systems - Video surveillance systems for use in security applications Part 3: Analog and digital video interfaces Data Limite: 2012-09-07 TC 80 CDV 61924-2:2011 Maritime navigation and radiocommunication equipment and systems - Inegrated Navigation Systems (INS) Part 2: Modular structure for INS - Operational and performance requirements, methods of testing and required test results Data Limite: 2012-05-11 TC 80 CDV 61993-2:2012 Maritime navigation and radiocommunication equipment and systems - Automatic Identification System (AIS) Part 2: Class A shipborne equipment fo the automatic identification system (AIS) - Operational and performance requirements, methods of tes and required test results Data Limite: 2012-07-13 TC 80 CDV 62287-2:2012 Maritime navigation and radiocommunication equipment



and systems - Class B shipborne equipment fo the Automatic Identification System (AIS) Part 2: Self-organising time division multiple access (SOTDMA) techniques Data Limite: 2012-09-07 TC 80 FDIS 62729:2012 Maritime navigation and radiocommunication equipment and systems - Shipborne equipment for long-range identification and tracking (LRIT) - Performance requirements Data Limite: 2012-05-18 TC 82 IEC 61730-1:2004 /CDV A2:2012 Photovoltaic (PV) module safety qualification Part 1: Requirements for construction Data Limite: 2012-06-22 TC 82 CDV 61829:2012 Crystalline silicon photovoltaic (PV) array - On-site measurement of I-V characteristics Data Limite: 2012-07-13 TC 82 CDV 62116:2012 Test procedure of islanding prevention measures for utility-interconnected photovoltaic inverters Data Limite: 2012-08-17 TC 85 CDV 60469:2012 Transitions, pulses and related waveforms - Terms, definitions and algorithms Data Limite: 2012-06-22 TC 85 CDV 62586-1:2012 Power quality measurement in power supply systems Part 1: Power Quality Instruments (PQI) Data Limite: 2012-09-14 TC 85 CDV 62586-2:2012 Power quality measurement in power supply systems Part 2: Functional tests and uncertainty requirements Data Limite: 2012-09-14 TC 85 CDV 62638:2012 Recurrent test and test after repair Data Limite: 2012-06-22 TC 85 CDV 62638:2012 Recurrent test and test after repair Data Limite: 2012-06-22 TC 89 CDV 60695-9-1:2012 Fire hazard testing Part 9-1: Surface spread of flame - General guidance Data Limite: 2012-08-24 TC 89 FDIS 60695-11-3:2012 Fire hazard testing Part 11-3: Test flames - 500 W flames - Apparatus and confirmational test methods Data Limite: 2012-07-06

TC 90 CDV 61788-5:2012 Superconductivity Part 5: Matrix tosuperconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires Data Limite: 2012-09-07 TC 90 CDV 61788-12:2012 Superconductivity Part 12: Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires Data Limite: 2012-09-07 TC 90 CDV 61788-18:2012 Superconductivity Part 18: Mechanical properties measurement - Room temperature tensile test of Ag- and/or Ag alloy-sheathedBi-2223 and Bi-2212 composite superconductors Data Limite: 2012-10-05 TC 91 CDV 62739-1:2012 Test method for erosion of wave soldering equipment using molten lead-free solder alloy Part 1: Erosion test method for metal materials without surface processing Data Limite: 2012-08-10 TC 94 CDV 62246-1-1:2011 Reed switches Part 1-1: Quality assessment specification Data Limite: 2012-05-04 TC 95 CDV 60255-24:2012 Measuring relays and protection equipment Part 24: Common format for transient data exchange (COMTRADE) for power systems Data Limite: 2012-07-27 TC 100 FDIS 60728-3-1:2012 Cable networks for television signals, sound signals and interactive services Part 3-1: Methods of measurement of non-linearity for full digital channel load with DVB-C signals (TA5) Data Limite: 2012-06-08 TC 100 IEC 62227:2008 /CDV A1:2012 Multimedia home server systems - Digital rights permission code (TA 8) Data Limite: 2012-06-01 TC 100 CDV 62680-1:2012 Universal Serial Bus interfaces for data and power Part 1: Universal Serial Bus Specification, Revision 2.0 (TA 14) Data Limite: 2012-08-10 TC 100 CDV 62680-2:2012 Universal Serial Bus interfaces for data and power Part 2: USB Micro-USB Cables and Connectors Specification, Revision 1.01 (TA 14) Data Limite: 2012-08-10 TC 100 CDV 62680-3:2012 Universal Serial Bus interfaces for data and power Part 3: USB Battery Charging Specification, Revision 1.2 (TA



14) Data Limite: 2012-08-10 TC 100 CDV 62680-4:2012 Universal Serial Bus interfaces for data and power Part 4: Universal Serial Bus Cables and Connectors Class Document Rev. 2.0 (TA 14) Data Limite: 2012-08-10 TC 100 CDV 62698:2012 Multimedia home server systems - Rights Information Interoperability for IPTV (TA 8) Data Limite: 2012-05-04 TC 100 CDV 62731:2012 Text-to-Speech for Television - General Requirements (TC 100) Data Limite: 2012-05-18 TC 105 CDV 62282-3-201:2012 Fuel cell technologies Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systems Data Limite: 2012-06-15 TC 105 FDIS 62282-6-200:2012 Fuel cell technologies Part 6-200: Micro fuel cell power systems - Performance test methods Data Limite: 2012-07-06 TC 106 CDV 61786-1:2012 Measurement of DC magnetic fields, AC magnetic and electric fields from 1 Hz to 100 kHz with regard to exposure of human beings - Special requirements for instruments Data Limite: 2012-08-10 TC 108 CDV 60065:2011 Audio, video and similar electronic apparatus - Safety requirements Data Limite: 2012-05-18 TC 108 IEC 60950-1:2005 /CDV A2:2011 Information technology equipment - Safety Part 1: General requirements Data Limite: 2012-05-18 TC 108 CDV 62368-1:2011 Audio/video, information and communication technology equipment Part 1: Safety requirements Data Limite: 2012-05-18 TC 110 CDV 60216-8:2012 Electrical insulating materials - Thermal endurance properties Part 8: Instructions for calculating thermal endurance characteristics using simplified procedures Data Limite: 2012-07-06 TC 110 CDV 61747-2-1:2012 Liquid crystal display devices Part 2-1: Passive matrix monochrome LCD modules - Blank detail specification Data Limite: 2012-09-14

TC 110 CDV 61747-4:2011 Liquid crystal display devices Part 4: Liquid crystal display modules and cells - Essential ratings and characteristics Data Limite: 2012-05-11 TC 110 FDIS 61747-30-1:2012 Liquid crystal display devices Part 30-1: Measuring methods for liquid crystal display modules - Transmissive type Data Limite: 2012-05-25 TC 110 CDV 62679-3-2:2012 Electronic paper display Part 3-2 : Measuring methods - Electro-optical Data Limite: 2012-06-15 TC 112 CDV 60216-1:2012 Electrical insulating materials - Thermal Endurance Properties Part 1: Ageing procedures and evaluation of test results Data Limite: 2012-09-14 TC 112 CDV 60243-1:2011 Electrical strength of insulating materials - Test methods Part 1: Tests at power frequencies Data Limite: 2012-05-18 TC 112 FDIS 60544-2:2012 Electrical insulating materials - Determination of the effects of ionizing radiation on insulating materials Part 2: Procedures for irradiation and test Data Limite: 2012-06-22 TC 112 CDV 62068:2011 Electrical insulating materials and systems - General method of evaluation of electrical endurance under repetitive voltage impulses Data Limite: 2012-05-18 TC 116 IEC 60745-2-3:2006 /FDIS A2:2012 Hand-held motor-operated electric tools - Safety Part 2-3: Particular requirements for grinders, polishers and disk-type sanders Data Limite: 2012-05-18 TC 116 CDV 60745-2-23:2011 Hand-held motor-operated electric tools - Safety Part 2-23: Particular requirements for die grinders and small rotary tools Data Limite: 2012-05-11



11. Projetos de normas da Organização Internacional de Normalização (ISO)/Comissão Eletrotécnica Internacional (IEC) Os projetos de norma estão organizados por “Comité Técnico conjunto” ISO/IEC. 11.1 Projetos em inquérito público


ISO/IEC TC 8 FDIS 80005-1:2012 Utility connections in port Part 1: High Voltage Shore Connection (HVSC) Systems - General requirements Data Limite: 2012-05-04 ISO/IEC TC CABPUB FDIS 17024:2012 Conformity assessment - General requirements for bodies operating certification of persons Data Limite: 2012-05-04 ISO/IEC TC CABPUB DIS 17021-2:2012 Launch of ballot on ISO/IEC DTS 17021-2, Conformity assessment - Competence requirements for certification auditing of environmental management systems Data Limite: 2012-07-27



12. Edição e anulação de outros Documentos Normativos 12.1 Documentos Normativos editados Para cada referência, menciona-se a designação codificada (prefixos DNP TS, DNP TR, DNP Guia, DNP CEN/TS, DNP CEN/TS, DNP CEN Guia, DNP CEN/CLC Guia, DNP CLC/TS, DNP CLC/TR, DNP CLC

Guia, DNP CEN/CLC, DNP ENV, DNP CWA, DNP ISO/TS, DNP ISO/TR, DNP ISO Guia, DNP ISO/IEC Guia, DNP IEC/TS, DNP IEC/TR, DNP ISO/PAS, DNP IWA e DNP IEC/PAS, número, parte e data), o preço, o título e a correspondência a documentos europeus e/ou internacionais, quando existam, o número do Termo de Aprovação e a respetiva data. Os Documentos Normativos referenciados entram em vigor no dia seguinte ao da edição desta Lista Mensal.

LISTA VAZIA

Publicação oficial do IPQ, enquanto Organismo Nacional de ... · PDF fileISO...

Documents

Transcript of Publicação oficial do IPQ, enquanto Organismo Nacional de ... · PDF fileISO...